I want some information about vidio file player

friends i want to know that is there any software for solaris that can run video files like video file player xmms if it is posiable to run a video file on solaris please tel me the name of software that can run video files
regards

dear friends
please tell me about xine viedo player it for solaris 8 OR solaris 9 i waste my two days on compling the xine-lib-0.9.13.tar.gz and xine-ui-0.99.1.tar.gz after untar them
after the compilation at the end some error occure . when i run the command make
ld: fatal: file ../../intl/.libs/libintl.a: open failed: No such file or directory
ld: fatal: File processing errors. No output written to .libs/libxine.so.1.8.1
*** Error code 1
make: Fatal error: Command failed for target `libxine.la'
Current working directory /xine/xine-lib-1-rc5/src/xine-engine
*** Error code 1
make: Fatal error: Command failed for target `install-recursive'
Current working directory /xine/xine-lib-1-rc5/src
*** Error code 1
make: Fatal error: Command failed for target `install-recursive'
Asif

Similar Messages

How i get some informations about audio file?

Hi to all,
i would like to know how i get some informations about audio file, such as its artist, bitrate, file type, duration, ecc...
Any help me?

Ok, but which are the docs of audio format?Again, what does that have to do with Java?
Where i can found these documents?Again, what does that have to do with Java?
Thank you...For nothing.
db

Want some information about on VO

i have a VO .in VO i have query and my query take five bind variable .it means i can not able to used this VO as different purpose .means when i used this VO that time i need to pass these variable .if i do not give any binding then it does not show value .so it means this VO is working when i give 5 binding value.so please let me know the way of doing is correct .or i make VO as General and diagrammatically add the binding value .

Hi.
Don't alter your query and create 5 bind variables and create 5 viewCriteria for all bind variables.Add your VO to AM by double clicking yourAM.xml.Add VO instance to Data Model .Then select relevent VO instance and press Edit..
Now you can see Edit View Instance dialog box and select all 5 view criteria.
See: Re: applying view criteria on bind this will help you.

Some information about http time out

hi 2 all,
I want some information about http time out,like what all different transactions are used.

Hi,
Could you be more specific? Here is a blog about timeouts:
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
/wg

Nation advanced search on my IMac, which I think is a spyware. When I want wo go to google chrome it redirects me to this ominous nation search engeen. Has anybody got some information about it and how I can get rid of

I just caught a thing called nation advanced search on my iMac computer, which I think is a spyware. When I want wo go to google chrome it redirects me to this ominous nation search engeen. Has anybody got some information about it and how I can get rid of it? What does can it do to my data and is it really a spyware? I just found information in youtube, that it is a spyware, and that it has to be removed, but the information they give for the removal is just working for PCs not for Macs.
Please help!

Thank you all for the friendly assistance provided.
I have found a solutiton to the problem I was having. I hope that many more can benefit from the information I will provide.
I started at Finder, then went to GO selected COMPUTER and then Machintosh HD, then Library, Scripting Additions folder and trashed all that was there. This is what worked for me, if you choose to not delete your content its up to you. Happy Computing.
God Bless!!
This solved my question

I need some information about File Download & File Upload

Hi All,
Can any one help me on this, I need some information about File Download & File Upload.
I read tutorial abt file upload and download but some of methods in tutorial are deprecated so i need clear information abt File upload and Download, if possible Code examples.
Thanks
Ragards
Ravi Golla

Hi Ravi
Check out thses links for examples:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00062266-3aa9-2910-d485-f1088c3a4d71
/docs/DOC-8661#22 [original link is broken]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/202a850a-58e0-2910-eeb3-bfc3e081257f
Otherwise you can simply follow this code for file download
Use the code like this.
1) Create the button and bind the action for it.
2)then write this code in the action.
3) do not write any thing in the init method.
try {
final byte[] content = this.getByteArrayFromResourcePath("C:
xyz.properties");
final IWDCachedWebResource resource = WDWebResource.getWebResource(content, WDWebResourceType.UNKNOWN);
try {
final IWDWindow window = wdComponentAPI.getWindowManager().createExternalWindow(resource.getAbsoluteURL(), "WD_Filedownload", false);
window.open();
catch(Exception e)
wdComponentAPI.getMessageManager().reportException(new WDNonFatalException(e), false);
5) writr the method getByteArrayFromResourcePath
//@@begin others
private byte[] getByteArrayFromResourcePath(String resourcePath)
throws FileNotFoundException, IOException {
FileInputStream in = new FileInputStream(new File(resourcePath));
ByteArrayOutputStream out = new ByteArrayOutputStream();
int len;
byte[] part = new byte[10 * 1024];
while ((len = in.read(part)) != -1) {
out.write(part, 0, len);
in.close();
return out.toByteArray();
//end
Similarly for file upload
Similarly for upload in to server path also do the same
IWDAttributeInfo attInfo =
wdContext.getNodeInfo().getAttribute("upload");
binaryType =
(IWDModifiableBinaryType) attInfo.getModifiableSimpleType();
uploadedName = binaryType.getFileName();
File filename =new File("
<server name>
<folder name>
"+uploadedName ); );
try {
FileOutputStream out = new FileOutputStream(filename);
out.write(b);
out.close();
} catch (FileNotFoundException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();

I want complete information about table maintanence genarator?

i want complete information about table maintanence genarator?

hi there,,,,,,,
The purpose of table maintainence generator is to enable the table maintenance through SM30, and to implement and validation etc on table field inputs.
SE11->Utillities->table maintainence generator
You need to enter the values of following fields:
1. Table name
2. Authorization group , and authorization object (select the suitable one )
3. Function group and package
4. Maintainence type : single or double screen maintainence view depending on the option selected.
5. Maintain screen number : you may specify a value or let the system generate one for you.
The validation code for the table entry is written in the flow logic of this screen. Even some of the fields may be made display only , by adding suitable code in the logic or directly disabling the input in table control in the layout.
Table maintanance is for creating,adding datas to an existing table.
it is for adding muiltiple records at a time in the table
A table can be manipulated by a program or manually.
When creating table, you will find a check box 'Table maintenance allowed'. If we
check that option, we can manually enter entries using SE16 or table
maintenance generator screen.
SE16 is for data browser.
Go to SE11, give the table name and click on change. Then Go to utilities--> Table
maintenance generator.
In the table maintenance generator screen, we should give Authorization Group,
Function Group name (Function Group name can be same as table name),
Maintenance type can be one step or two step, usually we will create with one
step. we should give maintenance screen number. After clicking on create button,
a table maintenance generator will be created.
To check it go to SM30 . In SM30, we find display, Maintain options.
We can view the table contents by choosing Display and we can create table
entries by choosing Maintain.
In the production system, end-users will not be having access to transaction
codes like SE11 and SE16. Developers will not be having access to many
transaction codes including the above two.
To view the contents of the database table, we will use SE16n in Production
system. Please find out the difference between SE16 and SE16n.
All these authorizations will be maintained by BASIS team, by creating access
profiles.
So in order to edit or create the contents of a database table, we should go for
table maintenance generator. In real time, authorizations will be maintained in
production system. (even in development and Test systems to some extent).
There is an audit like Sarbanes-Oxley Act for American clients, where every thing
will be audited by government agency. To know more about SOX, use the links on
the right hand side of this page.
The second reason is, we can edit or create multiple entries at a time, using table
maintenance generator.
Apart from that we have options like 'Enter conditions' in table maintenance
screen SM30. Please try to find out the use of those, by creating an example.
Table Maintenance generator: Difference between one step and two steps.
While creating table maintenance generator, we find below options:
When we choose one step, we have to give the screen number in Overview Screen field.
When we choose two step, we have to give both overview screen number and single screen number.
You can give any number for screen. Dont give 1000 screen number. As this
number is reserved for selection screen.
When we choose two step, two screens will be created for table maintenance. For
single step only one screen will be created.
When we choose two step, table maintenance will work as follows
Go to SM30, give the table name for which you have created table maintenance-
Overview screen will be displayed. To create entries, when you click on new
entries. Another screen will be displayed, where you give input and save. You can
enter one record at a time.
Go to SM30; give table name for which you have created table maintenance-
Overview screen will be displayed; To create entries click on new entries, you can
enter the records on the same screen. You can enter multiple records at a time.
We use single step generally, as it is user friendly.
To completely understand the difference and above points please do exercise by
creating table maintenance generator in both ways (using single step and two
step).
Link: http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
Link: http://help.sap.com/saphelp_46c/helpdata/en/a7/5133ac407a11d1893b0000e8323c4f/frameset.htm
Link: /message/2831202#2831202 [original link is broken]
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
pls reward if useful
regards,
rekha

I need some information about jre 1.5 and jre 1.6.

Hello guys,
I need some information about jre 1.5 and jre 1.6.
Suppose if i have jre 1.5 customized with "additional language support" installed in my my desktop, and later on i install jre 1.6. will this jre over write all the esisting settings which was present in jre 1.5?
In short will the version upgrades disable the features of the old Version even though the old version is present in the desktop?
Thanks in advance for your answers.

In <2j_j3.1889$[email protected]> =?iso-8859-1?B?VG9t4XMgU3XhcmV6?= writes:
> Hi all, I am developing an acquisition data system for biomedical
>signals and I need to transmit this data from my hardware to PC using the
>USB port. For this, I am writing a device driver for Windows 98
^^^^^^ ^^^^^^ ^^^^^^^ ^^
That's not a trivial step. I would write a small C/C++ program that
exercises your driver (for robustness) just to be sure it's working
right first without crashing your system.
>The problem is that I don't know to use this driver in LabView.
>For now, I think to use a "code interface node" with code writen in C or a
>"call library function" with a DLL.
That's correct. _After_ you got your C/C
++ test program (and USB
driver) above working, then you can convert this little test program
into a DLL or CIN, which can interface with LabView. A DLL might be
easier (slightly) to write, but the CIN will work faster with LabView
and can be designed to be reentrant. The Code Interface Reference
Manual should guide you. Remember, this is a task for an _experienced_
C programmer. You'll need to use handles to pointers into all your
dynamic arrays and such passed into LabView.
After you got your CIN or DLL written, you can use a special CIN
function node to "link" (or bind) your CIN object into LabView's VI
diagram.
SOME THOUGHTS:
There are many hardware devices already on the market today that come
with Windows 98 drivers and DLL (or even CIN) libraries that would work
immediately with LabView. Why don't you save yourself three months of
work and simply buy one of these?
/\ Mark M Mehl, alias Superticker (Supertickler to some)
<><> Internet: [email protected]
\/ Preferred
UUCP: uunet!iastate.edu!mehl
Disclaimer: You got to be kidding; who would want to claim anything I said?

I want complete information about Badi?

i want complete information about Badi?

Hi
Please go thru the stuff below.
BADI is just an object-oriented version of user-exit. Instead of entering program code into some function module (as in customer-exit), you define some class which has to implement predefined methods and those methods are fired at predefined points just like an old user-exit. Some BADI can have multiple independent implementations which is much better for software deployment as several developers can implement the same BADI independently.
Difference between BADI and User Exits
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-level infrastructure (SAP and customer solutions), but instead allow for a multi-level system landscape (SAP, partner, and customer solutions, as well as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time. In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example).
All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard. A single Business Add-In contains all of the interfaces necessary to implement a specific task.
The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects.
Check the below links:
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/badi-vs-user-exit-405324
http://www.sapfans.com/forums/viewtopic.php?t=172792
Difference between BADI's & User-Exit.
1. Check the replies for your question which asked by another person.
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/569786
2. Similar thread.
http://www.sapfans.com/forums/viewtopic.php?p=559472&sid=99caa729618b18a8f7c46cc2f047af52
3. Same question explained
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Badi Tutorials
1. Sample program.
http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
2. Implementing BADI.
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
Hope it helps.
3. From help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/5f/071eed117c11d5b37d0050dadef62b/frameset.htm
Rewards Points if Useful
Regards
Anuj

How can I see the information about a file used in a sequence?

How can I see the information about a file used in a sequence?

You can use pretty much any two or multiple button mouse on a Mac, right out of the box.
I use this one: http://www.apple.com/mightymouse/

Firefix sad:"Copy/Cut/Paste is not available in Mozilla and Firefox. Do you want more information about this issue?" But,I can do the that from Opera...What should I do?

Copy/Cut/Paste is not available in Mozilla and Firefox.
Do you want more information about this issue?
That's what Firefox sad to me...I was Rich text editing,but I can
not use copy paste on.
I did the same site and Rich text editing with Opera,
and there was no problem.
I love Firefox,and I want ti use it,but if this is not posibile to do in Firefox,I must go with Opera from now on.
Pleace,responde to me,I need to fix a problem.
I hope you understanded my Engish!
Thank you...

Try to use the keyboard if the buttons on the web page aren't working.
* Copy: Ctrl+C or Ctrl+Insert
* Paste: Ctrl+V or Shift+Insert
* Cut: Ctrl+X or Shift+Delete
See:
*http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
*https://addons.mozilla.org/firefox/addon/allowclipboard-helper/

Copy/Cut/Paste is not available in Mozilla and Firefox. Do you want more information about this issue?

Copy/Cut/Paste is not available in Mozilla and Firefox.
Do you want more information about this issue?
Yes!

https://support.mozilla.com/en-US/kb/Clipboard+not+working
This extension will help you set the necessary permissions - Allow Clipboard Helper extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/852

I want to ask about deleting files that have been deleted in the trash but I want to remove it permanently from the trash can not

I want to ask about deleting files that have been deleted in the trash but I want to remove it permanently from the trash can not, indeed I delete files that are partly contained in the application file. I want to delete files that are also quite a lot by 5 Gyga, I've tried to remove it from the normal trash remains are not removed. How should I do?

+

Windows has the following information about this file type. This page will help you find software needed to open your file. Cannot get SEO quale loaded please help

I cannot download as I keep getting this when I try
Windows has the following information about this file type. This page will help you find software needed to open your file.
File Type: Firefox Browser Extension
File Extension: .xpi
Description: Compressed archive of primary file installation components – used by the Mozilla installer script to setup and install various applications. You may search the following Web site for related software and information:
Please advise how I go about downloading

despite the workaround, it doesn't fix the real problem. It shouldn't be a huge deal for adobe to add support for multiple svn versions. Dreamweaver is the first tool i've used that works with svn that doesn't support several types of svn meta data. If they're going to claim that Dreamweaver supports svn is should actually support svn, the current version, not a version several years old. This should have been among the first patches released, or at least after snow leopard came out (and packaged with it the current version of svn).
does anyone know if the code that handles meta data formatting is something that is human readable, or where it might be, or is it in compiled code.
i signed up for the forums, for the sole purpose of being able to vent about this very frustrating and disappointing situation.

I want complete information about dialog programs?

hi,
i want complete information about dialog programs?

Check this out
http://www.allsaplinks.com/dialog_programming.html
dialog programming
http://fuller.mit.edu/tech/dialog_programming.html
http://www.sappoint.com/abap/dptc1.pdf
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sappoint.com/faq/faqdiapr.pdf
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sapdevelopment.co.uk/tips/tipshome.htm
check sample code.
http://www.sapgenie.com/abap/example_code.htm
http://www.sap-img.com/abap.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCDWBTOO/BCDWBTOO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRPROG/BCSRVSCRPROG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRFORM/BCSRVSCRFORM.pdf
http://help.sap.com/saphelp_nw2004s/helpdata/en/e4/2adbef449911d1949c0000e8353423/frameset.htm
And also, you may want to check out the transaction DWDM for example of how to use the control framework.

I want some information about vidio file player

Similar Messages

Maybe you are looking for