I want the Drivers of Canon LBP 2900 for macbook pro., i want the Drivers of Canon LBP 2900 for macbook pro.

please give me any link of Canon LBP 2900 Drivers for MacBook Pro ..i want to instal the printer but its not done

I don't see your printer on the supported Apple list - and when I visit Canon, all I get is this:
Apparently, it's not supported in OS X.
Clinton

Similar Messages

I cannot get my MacBook Pro to print greyscale on my Canon MG6450. I cannot access the printer driver panel on the Macbook. So I am stuck printing everything in colour and cannot specify which pages I want printed.

I cannot get my MacBook Pro to print greyscale on my Canon MG6450. I cannot access the printer driver panel on the Macbook. So I am stuck printing everything in colour and cannot specify which pages I want printed.

Try resetting the printing system:
OS X Mavericks: Reset the printing system
Next try deleting the system and reinstall the printer..
BTW this is Mac Pro desktop forum

HT204135 I have a MacBook Air and bought a Canon MP495 printer scanner with WiFI. Since the Mac gas no disk drive and had to down load the printer, scanner drivers and a navigation and network software from Canon's website. How do I get the software to wo

I have down loaded printer,scanner drivers and 2 applications Navigator and Network from Canon's website. I cannot seem to get these to run althought the printer works when connected to the Mac with a LAN cable Canon's documentation is useless because it relies on downloading a disc which you cannot do without a CD drive that MacBook Air does not have. Any suggestions appreciated.

Hi John. Thanks for that input. At Step 6, after clicking "Next" I get a window telling me my OS version is unsupported and the installation may not complete. I am prompted to go to Canon's web site to "Check Latest Info".
I've had this window on previous attempts and from Canon's web site I downloaded two drivers as follows
- ICA Driver V4.0.0
- Canon IJ Network Tool V4.5.0
I'm not sure if these are the correct / complete drivers I need for this install or not.
I continue to follow all the steps. At step 9 I click "Wireless Set Up using USB" amd get a License Agreement (a little different than instructions)
I click "Agree" and it goes to a Setup window with two progress bars showing the installation. I've not been prompted to connect the USB?
After the Setup window is done, I am then prompted to connect the printer via USB. I connect the printer and click on "Redetect". It is not detected.
I then try following the Canon on screen instructions for connecting to the wireless LAN amd enter the password. It searches and indicates "Connecting" on the window, but it never connects and the blue light just blinks
So, at this point I am stuck??
Thanks
Stephen

When I try to print using Windows 2008 print server I have to use the generic print drivers supplied. If I use the OEM driver the printer locks up. I have tried a HP 4 plus and a Canon Copier.

When I try to print using Windows 2008 print server I have to use the generic print drivers supplied. If I use the OEM driver the printer locks up. I have tried a HP 4 plus and a Canon Copier.

A number of vendor drivers written for OS X cannot be used when connecting via SMB to a printer that is shared by Windows. This is due to limitations of the driver.
In some cases, if you were to enable the LPD Print Service in Windows, you can connect to the share using the same syntax as SMB but on the Mac you would use the LPD as the protocol.
If you can reply with the brand and model of printer you have then we may be able to provide more information.

I just purchased a Canon MG5220. I have installed all of the updated drivers for 10.7.3. The scanner is working wirelessly, but I can't add my printer. Any ideas?

I just purchased a Canon MG5220. I have installed all of the updated drivers for 10.7.3. The scanner is working wirelessly, but I can't add my printer. Any ideas?

With most multi-function devices, you need to run the printer manufacturer's setup/configuring program first. That will either "Add" the printer directly, or make it discoverable in the "Add-a-Printer" window. Look around, you probably downloaded that program when you downloaded the Driver.

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please help

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

Being new to working with Mac, I was wondering if anyone can tell me how to set my Mac Book Pro wirelessly to the Canon Pixma Pro9000 Mark ll? My husband had gotten this printer and the sales person said that it can be set up wirelessly to my Mac Book Pro

Being new to working with a Mac, I was wondering if anyone can tell me step, by step on how to set up my Mac Book Pro(Mid 2012) wirelessly to a Canon Pixma Pro9000 Mark ll that my husband had gotten me? Sales person told him that it's compatiable to my Mac Book Pro, Mtn Lion, but I do not see it and I don't see how to do it wirelessly. Any help would be appreciated. Thanks ;o)

Hello:
There is nothing wrong with asking questions. There are no dumb questions....answers, yes, but not questions.
If you set up your wi-fi router to establish a network, then both your printer and MacBook Pro will connect wirelessly. *** I do not know what kind of router you possess, I don't want to suggest things that might not be relevant.
Barry
P.S. No need to apologize! Most of the people here (none of us are Apple employees) enjoy trying to help others.

Canon LBP6000 print driver - no printer appears in the 'add printer' section' I have installed Mac CAPT Ve r340 and nothing shows.r

I was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop.
I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options. So very open to advice.
Thanks
T.

The ability to see the LBP6000 in the Add Printer view is not reliant on the printer driver but the USB cable. If you have the printers USB cable connected directly to the Mac, as opposed to having it connected to the Windows computer you mention or to some sort of USB hub, then it should appear in the Add Printer > Default view. If it does not show, then try another USB cable. You can also open System Information on the Mac and select the USB section in the left column. Then in the top right pane you will see all the USB busses on the Mac and the LBP should be seen under one of the busses if the USB cable is okay.
With regards to the action to remove all printers, I would bet that you performed a reset of the printing system.

After upgrade to Maverick, no pilot for canon MP600 scanner, i need to install back the old OSX, how can I do?

I need to ungrade from Maverick to my old OSX?
I don't know how to start.
The problem is that Canon MP600 is old and have no interface for scan, even command from the printer function keyboard.

Erase your hard drive then install the OS X version your prefer. If you have a backup of the old system, then erase the drive and restore the backup.
Since you haven't provided any useful information about your hardware or what system you want to install, this is as far as i csn go.

Pse trial v12 installed but when opening the editor it shuts down after 2 seconds, what can be the problem? I have windows 8.1 64 bit with the latest video drivers installed. Thanks

PSE trial 12 installed just fine but when i start the editor it opens and shuts down after about 2 seconds without an error, the only thing that appears is a message with 'continue trial'.
I have windows 8.1 64 bit and i already installed the latest video drivers, intel hd 4000 and nvidia geforce 710M.
I also installed premiere elements version 12 with the same problem.
What can be the problem here, please help?
Thanks.
Wim.

Hi roberto-
Yes, its a shame. I have also contacted lenovo support hoping that they can sort out this problem. However, first response from them was 'contact your internet service provider since internet connectivity goes down'! :-/ I am hoping I have been able to get through to them now at least about where the problem lies. I wonder if anyone has tried using the laptop with the same broadcom wireless adapter with some other version of OS (linux, windows 7 etc.) and whether they still face the same problem. I haven't tried that yet. If this is just an OS / driver issue I hope someone somewhere is working on a fix! If not, I guess the only other solution would be to get an external USB wifi adapter but that is not something one would want to do when you buy a brand new Lenovo laptop. This was a big let down for me.
-sag

How do i transfer a compilation photo file from iPhoto consisting of canon(img) and lumix(p..) in the order i compiled them to a usb stick as at the moment it is putting all the lumix files after the canon files?

I have a macbook pro 15 inch retina 16 gb 1600mhz 2.7intel i7 osx 10.8.5
I have just put together an iPhoto file of wedding photos consisting of a compilation of images from my canon(img files) and lumix(p..files) I want to know how to transfer them to a usb stick in the order i compiled them as at the moment it is putting all the lumix files after the canon files which is not how i want to present them to the newlyweds?

Files are ordered by the file-viewer being used. What viewer are you using, and what data field are you sorting by?
In Finder, as in most applications, you can select the data field to sort by clicking a column header. Clicking the selected header will reverse the sort.
This is the Aperture forum, but what applies to Aperture is likely also true for iPhoto: if you want to be able to sort your files in a specific order in a file-viewer, you should give them names that allow for sorting in that order when the name field is selected as the data field to sort by. In Aperture, one creates new files by exporting, and one uses a File Naming Preset to name the files. The File Naming Preset can start with an ordinal count or a sequence number. Either of which will allow you to retain your order when viewing your files in a file viewer.

I have photoshop CS4 with the newest update. I'm a photographer and just purchased the new canon 7d mk II. Today, I shot some photos on raw but am unable to pull them up in photoshop. A window pops up saying "photoshop cannot recognize this type of file.

I have photoshop CS4 with the newest update. I'm a photographer and just purchased the new canon 7d mk II. Today, I shot some photos on raw but am unable to pull them up in photoshop. A window pops up saying "photoshop cannot recognize this type of file. The thumbnails are white with a blue and white CR2 on them. Please help.

Adobe Camera Raw 5.7 is the latest for Photoshop CS4 Adobe - Photoshop : For Windows
The problem is that your new camera is supported by ACR 8.7 and only Photoshop CS6 and up supports this version.
So if you do not want to buy CS6 or subscribe to the $10/month Photography Program, you have to convert the CR2 files to DNG to work on them. Your original CR2s are untouched in the process, you just can't directly edit them in CS4, only the DNGs.
Maybe Canon offers editing software for their CR2s, but CS4 is not going to be updated and there is no way around that.
It's not what you want to hear, but that's the situation so far.
Maybe Elements or Lightroom has updated raw support for your camera, so I encourage you to visit those forums and ask.
Gene

Using PS CS1 & a Canon EOS Rebel T3i. Where to get the plug-in to use camera raw?

Using PS CS1 & a Canon EOS Rebel T3i. Where to get the plug-in to use camera raw?

Thank you.
Windows 7 Starter
on a Toshiba NB505
Intel Atom CPU [email protected]
This is my internet notebook access device.
My primary system is MS Windows 5.1, with a flat screen crt.
Does this help?
Want to use RAW, can't afford to upgrade equipment just yet.
Thanks again for any guidance offerer
Michael
Connected by DROID on Verizon Wireless

Importing Canon Picture Styles into Aperture (how to keep the metadata) RAW

I have a Canon 30D. Often I use the picture styles settings to shoot Monochromes. When I bring them up in Aperture to import they read as Monochromes (they are RAW) and as soon as I import them....Aperture strips it. This is pretty frustrating when I have a shoot of 300 images and 85 of them are black and whites. Canon software keeps the settings if I use their software, but i'm building an Aperture Library.
Does anyone have a fix around this?

Although I don't know for sure, it is possible that Canon Picture Styles are not in industry standard EXIF, and so they might be a Canon private format only readable by Canon software. If that is the case, there isn't much Apple can do but reach some kind of deal with Canon. Apple may or may not want to go to the trouble, because they might not want to also support the private data in other manufacturers' private raw data, like Nikon's encrypted white balance.
It's worth noting that Adobe's software doesn't read Canon Picture Styles either; I've read posts asking about it on their forums too.
Possibly worth noting most of all: The only advantage to shooting in monochrome is to be able to use the camera to visualize it. You can often get a better black-and-white by customizing the conversion from the original raw color data.

Trying to update firmware on my canon printer MG5320 but in doesn't recognize the printer being plugged in via USB cable

I am trying to update firmware on my canon printer MG5320 to be able to use the airprint feature but in doesn't recognize the printer being plugged in via USB cable. I have tried restarting the macbook, turning on and off the printer, repairing permissions, deleting and redownloading the update what else can I do? The prinyrt works fine otherwise...

If there are no drivers for Yosemite you might be in trouble.. HP will tend not to support printers once they are EOL.
Getting it running over wireless rather than USB might be worthwhile.
Can’t connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Has the printer been working and now failed after update.. what update caused the failure if that is the problem??

Brand new Canon 5d mark ii has dust inside of the LCD screen.. !!!

Hello guys. I just received Canon 5d mark ii + 24-105mm lens kit in the mail couple of days ago. It's an amazing camera that will help to improve my work. I didn't want to use the camera until I received the screen protector and the UV filter to make sure that the camera is well protected. (My previous SLR ended up having so many scratches on the LCD screen)
So today I received the screen protector. I was cleaning the Lcd screen to install the protector and I realized that there is a dust inside of the LCD screen. I didn't even use the camera more than to see if it functions right. It's totally visible.
I was wondering if anyone had this problem with their brand new camera ?!?!
I know there is an option to exchange the camera since it's in the return/exchange period but I really don't have time for this. I have photo shoots coming up and I really can't be without my camera more than couple of days. Unfortunately they don't have the kit in any of Bestbuy location in Los Angeles area that I can go in and exchange. They will ask me to return the camera kit to a Bestbuy location and wait for them to credit my Bestbuy card (which will take 3-4 days - and i don't have enough credit limit to buy another one right away and be patient for them to give me my money back ) and replace an order online again.
Any advice appreciated...
Thanks

First of all. Thank you for your reply. I actually realized couple of other things that made me suspicios that this camera was used before. Of course i might be wrong however - the package shipped from Bestbuy Return center + loose diopter adjuster knob before than even touching it + having dust inside the lcd screen + hair and dust inside the lens - made me really uncomfortable keeping this camera.
Don't get me wrong, I love Best Buy. I've been shopping from Best Buy for years. I have been purchasing many things every year and I really do trust them. That's the reason why i didn't mind to have Greek Squad 3 years extended waranty package with my purchase. However spending almost $3500 for a top of the line camera and not having it flawless from the first day made me a little disappointed. That's all..
I will be going to Best Buy later today and return the camera. I am just hoping that they can refund the money to my card in couple of days so i can place an order for a new one. Even better if i can return the camera and they can place an order from the store for me..
Thank you so much for your reply again...

I want the Drivers of Canon LBP 2900 for macbook pro., i want the Drivers of Canon LBP 2900 for macbook pro.

Similar Messages

Maybe you are looking for