I want the location of the file system in SharePoint.

Hi All,
In SharePoint some files are stored in file systems and some files are stored in content data base.
Now i want the location of the file system in SharePoint.
Thanks in advance.

Hi Anil,
In SharePoint 2010 files are stored at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14. This directory represents core SharePoint files
Below link will help understand the14 hive structure in SharePoint 2010
http://www.learningsharepoint.com/2010/06/07/14-hive-and-other-sharepoint-2010-directories/
http://mysharepointwork.blogspot.in/2010/02/sharepoint-14-hive-directory-structure.html
Thanks
Somnath Matere

Similar Messages

Windows 8.1 Client Side Caching - Is it possible to specify the location of the offline file cache?

Hi,
Is there any approved way to change the location of the offline files cache in Windows 8.1? I'm asking before moving client systems from Windows 7 where a registry change was required - is this still the way to go?
I believe that if the default user-profile directory is moved, this causes problems for updates to Windows 8/8.1 now, is the same true if you move CSC?
Just a bit of background. The systems I want to do this for have smallish SSD boot drives with a higher capacity spinning disk. The machines are members of a domain with Folder Redirection setup. I could setup group policies to disable
caching of some of the larger directories or even disable CSC entirely on the machines which have an SSD boot drive, but would prefer not to do so.
Thanks in advance.

Hi,
According to your descryption, In windows 7, the tool is migwiz.exe, namely the Windows Easy Transfer, you can modify the registry in the way listed in the post below:
http://social.technet.microsoft.com/Forums/en-US/bbf5890c-b3d7-4b38-83d8-d9a5e025fb2b/how-to-move-clientside-caching-to-a-new-location?forum=w7itproinstall
In Windows 8, Windows easy transfer is also a built in tool to migrate user profiles and user settings, but as for the offline transfer, I suggest to use the USMT for your situation.
Because with USMT you can specify the folder that you want to migrate the files to, by using an offline.xml you can set the path just as the sample listed below:
<offline>
 <winDir>
 <path>C:\Windows</path>
 <path>D:\Windows</path>
 <path>E:\</path>
 </winDir>
 <failOnMultipleWinDir>1</failOnMultipleWinDir>
</offline>
You can also refer t othe details at:
http://technet.microsoft.com/en-us/library/hh824880.aspx
Regards
Wade Liu
TechNet Community Support

HOW CAN WE CHANGE THE LOCATION OF TEMPORARY FILES DURING BROWSING?

IN ORDER TO WATCH VIDEOS A LARGE AMOUNT OF MEMORY IS REQUIRED. BUT THE DRIVE IN WHICH FIREFOX IS INSTALLED HAS MORE NUMBER OF PROGRAM FILES. IS THERE ANY WAY TO CHANGE THE LOCATION OF THE TEMPORARY FILES THAT GET ACCUMULATED DURING BROWSING?

You probably need to change the value of the %temp% and %tmp% environment variables in:
Control Panel > System > Advanced > Environment variables
You can set the location of the Firefox cache by setting a pref to that location. 
See http://kb.mozillazine.org/browser.cache.disk.parent_directory
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page.

The location of the document ... cannot be determined - file save fails.

I'm a bit stuck here.
I just got a new mac pro, installed Logic 9 on it.
When I try to save my progress in the proj I keep getting the message:
The location of the document ** cannot be determined.
You can specify where to save it.
Needless to say this is quite tedious and can't really fly.
When I opened Logic 8 that was installed on another drive (previous system)
I got the same message.
HOWEVER, when I login as 'root' user (super admin)
I'm able to save my work just fine, both on Logic 8 and 9.
Surely I'm missing on some unix / system / permissions thing here.
Is there anything that can be changed ?
cheers
Billet

I'm curious if you have changed your username recently? Perhaps Logic was installed by a different user? I've had a similar issue with pages and keynote which I had installed with a user in the admin group and login with a user in the staff group, which is the default user on Snow Leopard.
I have solved this by changing the permissions of the folder into which I wish to save my docs. Go to the folder above the folder you are saving to. For example, if you are saving to the /Users/you/Music/Logic folder then go to the Music folder.
From Utilities > Terminal:
sudo chmod -Rf 755 YOURFOLDERNAME
enter your admin password when prompted
For example I want to save to the desktop. I open the finder and go to my home directory then
sudo chmod -Rf 755 Desktop
That's it!
Message was edited by: S. Cantus

CDAUI1000 Error while trying to load data. Ensure that the system path includes the location of the WebAdminLib.dll.

Hello, been receiving this error in Desktop Admistrator Web admin. I have tried the fix where you change the environment variable path and delete the Team Admin folders, but still receive the error. Any ideas??
7.0(1)SR04ES02_Build023
Thanks

Hi All,
So to recap, these are the steps to be followed:
On the Unified CCX server, add the location of the WebAdminLib.dll
(C:\Program Files\Cisco\Desktop\bin) to the Path environment variable.
1. In Control panel, launch the System utility.
2. On the Advanced tab, click Environment Variables.
3. From the list of system variables, select Path and click Edit.
4. In the Variable value field, locate the string C:\Program
Files\Cisco\Desktop\bin; and, using cut/paste, move it to the beginning of
the variable value string. This results in the DLL being accessed from the
correct location.
5. Click OK and close the System utility.
6. Stop the Cisco Unified Node Manager.
7. On the Unified CCX server, delete the teamadmin folder from these
locations:
C:\Program Files\wfavvid\tomcat_appadmin\webapps
C:\Program Files\wfavvid\tomcat_appadmin\work\catalina\localhost
8. Restart the Unified Node Manager, and wait two minutes.
9. Access Cisco Desktop Administrator and verify that you can navigate to
the Services Configuration
Documentation:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/
reference/guide/cad66ecd.pdf (pg 29)
In case this does not solve the issue, please verify if you are hitting the defect: CSCtr07664
Sometimes, the dll itself might be corrupted and thus the options in front of you are:
1) OS repair using the software disk
2) Rebuild the node
Regards,
Abhiram Kramadhati

What is the location for the swatches file in the illustrator product part of Adobe Creative Suite 3 Design Premium for windows (date and lenght)? File that manges its funcionallity. Thanks

As per adobe agent chat representative, the following question is posted on the fórum to obtain an answe from adobe.
What is the location for the swatches file in the illustrator product part of Adobe Creative Suite 3 Design Premium for windows (date and lenght)? File that manges its funcionallity.
Thanks
<moved from downloading,installing,setting up - kglad>

Illustrator is not working as it should...
I want them to compare the original size and date of creation with what I have installed on my computer... I have installed several times with my original CD and I tried once downloading the files from the adobe site (using my own license). I suspect the files has been modified or renamed on my laptop by an external unauthorized user causing the malfunction of the application.
Customer services does not support CS3 anymore and the updates / patches in the adobe site does not solve the problem... They redirect me to the forums for support...
Presently, my problem is that after creating a swatch and drag it to the swatch panel, it does not fill as it should a new form... Now, after deactivating and activating my license the swatch seems to fill the new form but when the filter that the swatch has is persistence in the next filling object created even though a different color is being used as a fill (X)... Help in the creation of a swatch over the internet just complicate the issue.
That's why I would like to know whether updates on my product are being received or files are being replaced without my knowledge...
Thanks...
PS Do you know how to contact a staff adobe employer on the forums?

Folder redirection with Offline files enabled - Can I change the location of the locally cached files?

I have a 2012 r2 server setup with folder redirection and offline files enabled. All this works perfectly.
As you probably know, the local cache for offline files is stored at c:\windows\csc\v2.0.6\namespace\servername\
The problem I have run into is that one user (who cannot be told to delete files cough ceo cough) has a very large documents folder, and a small SSD drive for his C drive. So the offline files are filling up his SSD. He wants all his files to be synced,
so decreasing the max disk usage is also not an option.
What I would like to do is move the Offline files to his D drive which is a large drive, however I have been unable to find any official method for doing this. Is there any provision to change this?
If not, would it work to move the entire \servername\ path to the d drive and then create a junction at c:\windows\csc\v2.0.6\namespace\servername\ that points to d:\servername\?
Thanks,
Travis

Hi,
The following article is for Windows Vista but it should work at least in Windows 7.
How to change the location of the CSC folder by configuring the CacheLocation registry value in Windows Vista
http://support.microsoft.com/kb/937475
Meanwhile creating a symbolic link should also work like:
mklink /d "C:\Windows\CSC" "D:\CSC"
Note: It will create d:\csc folder so you do not need to manually create it.
Note 2: As mentioned above, you may need to re-sync the offline files. Personally I also think robocopy will not work.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

The exit code of file system control is 8

imac starts and then go off, start in safe mode, during the repair of the disk, the following written "the exit code of file system control is 8" and the disk is not repaired

Here are the answers to your questions:
1. I'm using LabVIEW 8.5
2. The colored box is the one visible as a border of the system numeric on the front panel. It is a rectangular box made up of lines that are one pixel thick. In the control editor, this shows up as the frame in the parts window. This same color is also visible in the control that opens the drop down box in a system enum.
3. The color picker is the window that is visible when I have the paintbrush tool selected and I right click on a control. A window comes up that has all the RGB colors visible, as well as 6 system colors that I can pick.
The reason I want to find this color is because I am trying to make custom controls that use the system colors. The color that is used is not listed in the 6 system colors in the color picker.
S G
Certified LabVIEW Architect, Certified TestStand Developer, Certified Professional Instructor
Attachments:
Screenshot.doc ‏85 KB
Example.vi ‏8 KB

What is the location of these files in R12

Hi,
I want to know the location of the following files in R12
httpd_pls.conf
oprocmgr.conf
jserv.properties
i know that pls is obsolete in R12. But in the followingdocument (Page no. 17 and 18) which says i need to add some paramters in these files.
http://dlc.sun.com/pdf/821-0991/821-0991.pdf
Thanks

Hi,
Hi,
I want to know the location of the following files in R12
httpd_pls.conf
oprocmgr.conf
jserv.properties
i know that pls is obsolete in R12. But in the followingdocument (Page no. 17 and 18) which says i need to add some paramters in these files.
http://dlc.sun.com/pdf/821-0991/821-0991.pdf
Thankswhy dont you use simple find commad from application base directory??
$find . -name <file-name>
Eg:$find . -name jserv.propertiesthanks,
X A H E E R

Why does Itunes keep losing the location of music files?

Itunes will lose the location of the music files. they clearly listed under the right album and proper order but when you select a song a exclamation mark shows up and a window pops up asking me where it can be located. I don't know, Itunes lost it, I haven't done any maintenance work to the hard drive that I know of other than clean the registry on my firefox search engine.

The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, one of its parent folders, or the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place. In the case of a library moved from one system to another there are also potential permissions issues. See Repair security permissions for iTunes for Windows.
Select a track with an exclamation mark, use Ctrl-I to Get Info, then click No when asked to try to locate the track. (Due to a bug in iTunes 12 you currently have to say No twice!) Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, a folder renamed, or a drive letter has changed, it should be possible to reverse the actions. If the difference between the two paths is an additional Music folder in one path then this is a layout issue. I can explain further if that is the case.
In some cases iTunes may be able to repair itself if you go through the same steps with Get Info but this time click Locate and browse to the lost track. It may then offer to attempt to automatically fix other broken links.
If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
i may be able to give some more focused advice once there is a clearer picture of where things are.
tt2

I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

I cannot update or install updates on itunes. It says that the location for that file does not exist. I cant even uninstall itunes as the same error message comes up.

I cannot update or install updates on itunes. It says that the location for that file does not exist. I cant even uninstall itunes as the same error message comes up.

Hi vindog60,
Thank you for using Apple Support Communities.
To troubleshoot this issue where you get an installation error with iTunes on your Windows PC, please follow the steps in the article linked to below.
Issues installing iTunes for Windows - Apple Support
Cheers,
Alex H.

How do I change the location of the coldfusion-out.log and coldfusion-error.log files in CF10

When I change the log location in ColdFusion Administrator it changes the location of most but not all the log files. I have a requirement from my customer to place all log files on a separate partition on the server. For ColdFusion 9 I was able to modify the registry settings to change StandardOut and StandardErr for the ColdFusion Jrun service. This does not appear to the case for ColdFusion 10 which now uses Tomcat 7.
I tried modifying log4j.properties file and was able to relocate the hibernatesql.log, axis2.log, and esapiconfig.log but not the coldfusion-out.log.
I am running ColdFusion 10 Enterprise Edition on a 64-bit Windows 2008 Server.

The location of the rest of the ColdFusion logs can be changed in the ColdFusion Administrator. Go to the Debugging and Logging section, Logging Settings. There is a form at the top of the page where you can change the log storage location.
-Carl V.

Output error:the name of the package "greet" does not reflect the location of this file...

output error: The name of package 'greet' does not reflect the location of this file. Please change the package definition's name inside this file, or move the file. C:\Documents and Settings\Igal\My Documents\meiran\greet\Greeter.as
I keep on recieving this output error although my source path is set to C:\Documents and Settings\Igal\My Documents\meiran\greet.
any suggestions why this happens?

The classpaths you define in your Flash software tell the compiler where to look when it needs to find a class. According to your as file, the very top line indicates the Greeter.as file should be at a location specified by the path...
one-of-your-classpaths\com\example\quickstart\
So if one of your classpaths is: C:\Documents and Settings\Igal\My Documents\meiran\greet\
and you placed the file in the greet folder, then in your AS document you should not have the "com\example\quickstart" and your import statement in the fla should not be using that (should just be... import Greeter;)

"click on the link for each error to highlight the location of the error in the PDF file" fails

I'm working on a document which has tables in it. When I run the accessibility checker for 508 compliance, it tells me the document failed the test (g) 4 Table element(s) with no TH child elements and then provides links to the 4 tables in question. Now, when I click on those links, nothing happens. I know it is supposed to take me to the location of the problem table, and in fact this has worked for me in other documents in the past. Why is it not working now? I could really use this functionality because there are more than 4 tables so I can't tell which ones are failing the test without Acrobat highlighting them for me.
Thanks!
Maddie

Hmm, I tried that but it didn't solve the problem. When I searched for the tables there was always something in the code for the table. Also, saving the PDF to HTML really messed up the layout of the file, so it was hard to tell how well it paralleled the code in the PDF file.
However, I don't know if this would give you any ideas, but these are links from the Accessibility Report, from the list "Structure errors: 7 table element(s) with no TH child elements."
This is one that took me to a table:
file:///U|/Booklets/second%20edition%202011-2016/booklet-2/Book.TwoTAGGED.pdf#page=26&high light=50,558,675,180
This is what ALL the other 6 look like (which, when clicked, took me nowhere):
file:///U|/Booklets/second%20edition%202011-2016/booklet-2/Book.TwoTAGGED.pdf#page=0&highl ight=-32768,-32768,-32768,-32768
It makes me think that there are some artifact tables floating out in space somewhere, at the location "-32768,-32768,-32768,-32768."
If there was some way for me to find them and either tag them as artifacts or delete them... that might solve the problem! Do you know if there is a way?
Thanks!
Maddie

I want the location of the file system in SharePoint.

Similar Messages

Maybe you are looking for