I want the projected image on the wall to just be the full screen of the slide

when I plug my mac air into my projector, Keynote display on the wall has Current slide: 1 of 85. How do i make this go away on the projected image? This also decreases the size of the image on the wall. It's not full screen on the wall.

You may have your primary and secondary displays swapped since what you are seeing on the wall is the Presenter's View which would normally be the one visible to you on your MacBook Air.
Check your Keynote Preferences Slideshow Settings. At the bottom of the settings list are options to switch the displays.
Also, some MacBooks have a Function Key that allows the displays to be swapped from the keyboard; on my MacBook Pro it is F7, but that may differ between models. Look for a Function Key with two overlapping rectangles. It is a toggle key for displays.
Good Luck.

Similar Messages

HT1947 If you add music VIDEOS to Up Next playlist, then go to look at the album cover playing screen, then go to add another song from diff playlist, no longer can see Up Next, just go to full screen mode button. Using remote app iphone 5 to play out of

If you add music videos to Up Next playlist, then go to look at the album cover playing screen, then go to add another song from different playlist, you no longer can see Up Next, just go to full screen mode button. Using remote app iPhone 5 to play out of iTunes. It looks like it works fine for regular music, but for music videos you can't see your up next unless you go back on the computer to change once you've left the screen. When using the remote app, you shouldn't need to go to iTunes on the PC to view or edit Up Next already added. See first image, you can hit upper right and get back to Up Next (second image). Third image is music video, where you can't get back to Up Next, just swap between full screen and not. I hoped 3.0.1 would have the answer, no luck!

wow, very nice review Makes me want to get a vision for myself.
WebKnight wrote:
<SPAN>
Add the ability to randomly select a new background from a pre selected group of photos every time the player is turned on or each day.
I would love that feature. I can't stand useing my computer with a single wall paper anymore (I have 500 anime pics that i rotate between every 2 mins ) If you could make the vision rotate background every x minutes or every time the player is turned on, it would be totally amazeningly sweet!!!! (i might have to go out and buy one then :P)
I just hope that creative has better firmware support with the vision than they have had with the touch.
Once again, great review

Do we have to have the slider option?

I really did look in the manual and other questions but couldn't find an answer.
I like the wall paper, but I don't want the slider, if that's an option.

Removing the slider is not an option.

Paused Slide continues when I click anywhere on the slide -- why? (CP5)

Hi -- at the end of the CBT I am creating I present some challenge questions. I am not using the Quiz feature as I do not need to capture the students answers.
I added a blank slide with an image with roll-over captions. I added a "Continue" button so they can go to the next page after they are done reviewing the image.
Everything works fine, the slide pauses so they have time to mouse-over the image, and the continue button takes them to the next page when clicked.
The weird thing is that it also goes to the next page when I click anywhere on the screen. This only happens on these three slides, the rest of my movie does not progress when you click on the background.
For the slide, I have it set to On Enter=Continue and On Exit=No Action, Display Time=3 seconds
For the Continue button, I have it set On Success=Go to the next slide, Attempts=1, Last Attempt=Go to the next slide, Pause After=1.1 sec
Does anyone know why when I click on the slide it goes to the next slide? I want the slide to pause until only the Button is clicked.
Thanks!

Your Continue button is currently set up so that if the learner does not click the button a Last Attempt action will be used. By default this will be Continue. So although you only wanted the user to go to the next slide if they clicked the button, by setting attempts to only 1, you've told Captivate that any click outside the button should invoke the failure action for that button, which will be to Continue to the next slide.
Try setting your button to infinite attempts. This disables the failure action.

What's with the "Full Screen" movie rentals?

I"m as ****** as the next guy about the "No HD rentals" issue, but even more ****** off that most of the rentals I'm clicking on aren't just not available is HD, but aren't even available in "Widescreen". All Macs have a "widescreen" display now, and even your iPods, iPod Touch, and iPhone's are widescreen. No one wants to download a rental of a "Full Screen" movie anymore. My God, "300" in Full Screen - What are they thinking? If they want to offer "Full Screen" rentals, it should be an option, like when you go to the video store to buy a DVD, and are offered a "Full Screen" version or a "Widescreen" version. I don't think they even sell Full Screen TVs anymore. I have the same problem with PPV from the cable company... If it is not offered in Widescreen, I don't rent it. The same will be true here. I just never imagined Full Screen would ever even be offered, much less the only option.

The iTunes store has pretty much everything in widescreen that it can, but as with most televisions and "home theater" setups... Widescreen really doesn't matter. I know that some people prefer widescreen, but I don't. I have a projector not a TV so I have a 20 foot screen and the black lines in most "widescreen" movies eats up 4-5 feet of space. The only movies that come formatted for a widescreen TV in the first place(I am talking about on DVDs) are the Anamorphic Widescreen DVDs. They have a 2.35:1 aspect ratio, but very few DVDs actually have this, most are in 1.85:1 aspect ratio or 16:9 which is actually a fullscreen movie with black lines at the top and bottom.
As for HD rentals in the iTunes store, this is AppleTV only, and that is not Apple's fault, this is due to DRM. In order for you to play a copy-protected Blu-ray or HD DVD you have to have http://en.wikipedia.org/wiki/HDCP compliant hardware, the apple TV is HDCP, but you computer is not, so therefore Warner Bros/FOX/Sony etc. Can not be guaranteed that you won't be able to pirate their content.
Most people do not have a widescreen TV, and yes most Computer screen LCDs are capable of just about any resolution, but a lot of people are still in the non-HD zone.
I agree that many people want HD content, however given how hollywood lost the battle to keep DVDs copy-protected, they have taken enormous steps to protect HD content.....

How to make the slider longer?

Hi,
I want to add a slider in my code, but the slider is too short to choose the number.
Could anyone tell me how to make it? Thank you!
The following is my code.
slider1.setMin(0);
slider1.setMax(100);
slider1.setValue(10);
slider1.setShowTickLabels(true);
slider1.setShowTickMarks(true);
slider1.setMajorTickUnit(10);
slider1.setMinorTickCount(10);
slider1.setBlockIncrement(1);
slider1.setLayoutX(50);
slider1.setLayoutY(20);

This seems fine to me. Can you explain more what the problem is you are seeing? If you want the slider to be longer, you can manually size it (set the prefWidth, as in the following example). If that is indeed the problem, then I would suggest you look into one of the layout panes shipped with the platform which will help with making sure it is resized as you would expect.
import javafx.application.Application;
import javafx.scene.Group;
import javafx.scene.Scene;
import javafx.scene.control.Slider;
import javafx.stage.Stage;
* @author Richard
public class ShortSlider extends Application {
     * @param args the command line arguments
    public static void main(String[] args) {
        Application.launch(args);
    @Override
    public void start(Stage primaryStage) {
        primaryStage.setTitle("Hello World");
        Group root = new Group();
        Scene scene = new Scene(root, 300, 250);
        Slider slider1 = new Slider();
        slider1.setMin(0);
        slider1.setMax(100);
        slider1.setValue(10);
        slider1.setShowTickLabels(true);
        slider1.setShowTickMarks(true);
        slider1.setMajorTickUnit(10);
        slider1.setMinorTickCount(10);
        slider1.setBlockIncrement(1);
        slider1.setLayoutX(50);
        slider1.setLayoutY(20);
        slider1.setPrefWidth(400);
        root.getChildren().add(slider1);
        primaryStage.setScene(scene);
        primaryStage.show();
}

How can I automatically run animations when the slide is invoked?

Hi All
My question is (hopefully) simple, I have a number of Microsoft Powerpoint presentations that I want to import into Adobe Captivate 6. I want the slides to automatically run their animations when the slide is invoked either by clicking on the Table of Contents or by clicking on the Playback Control Panel. In other words, I want the slides to play their animations as soon as they are opened up rather than the viewer having to click on each side to make the animation work. Many thanks in advance for your time and efforts.
Moon_dogworth

Hi there,
Welcome to Adobe Forums
I apologize but I did not quite understand what exactly you are trying to achieve. If you want certain transition on the slide when the TOC is clicked or the slide is entered then you can choose the transition under the Properties panel on the right side.
See picture:
Hope this helps!
Thanks!

Can no longer put full screen apps to the left of 1st desktop in 10.9.3

Hello All
I was a huge fan of the Spaces feature back in OS 10.5 Leopard, but conceded to the change with Mission Control replacing Expose.
I had a particular setup that I liked with the old expose, and had to change that due to Lion and ML not supporting it.
Then Mavericks came along and fixed it. Until 10.9.3.
My setup was having Mail on the left, main desktop in the middle, and iTunes on the right.
Sorry for the storytelling (bad habit), so does anyone know how to restore the ability to put a fullscreen app to the left of the first desktop in 10.9.3?
Thanks,
xeni

I just made Safari full screen, by click on the arrows in the upper right corner.
Did a 4 finger swipe up, to gain access to Mission Control.
Then dragged the Safari way over to the left.
So now I have a full screen Safari on the left, an empty desktop in the second position (labeled as Desktop 1), Desktop 2 in the 3rd position with Calendar opened, Desktop 3 with Mail and Desktop 4 with Notes, Stickies and Reminders.
KOT

HT204380 How can I make the screen full screen when I am calling?

How can I make the screen full screen when I am calling on Facetime on a Macbook Pro Laptop?

Ok but if the iPhone 5s and 5 can go full screen the why can't the iPad Air as it too is new the problem shouldn't be hard to solve as I have looked the apple site and it show it just fine in full screen so I'm sure you understand when I say there is most definitely away of doing it so can Apple just sort it out I'm always telling my m8 how good Apple devices are and I've been let down on this so come on fix it PLEASE

Please make changes for contact image for for full screen... I bought Iphone Only for full screen contact image so please make changes for full screen contact image...

Please make changes for contact image for for full screen... I bought Iphone Only for full screen contact image so please make changes for full screen contact image...

I bought Iphone Only for full screen contact image
Is that so? So you don't use ANY of the other features of the iPhone? You don't use the internet, apps, play games, make calls, take pictures, or ANYTHING else at all? You just wanted full-screen contact image?
I don't believe you...
Please make changes for contact image for for full screen
Tell Apple: http://www.apple.com/feedback/

I am trying to connect a Macbook Pro to a projector for a Powerpoint presentation. When I use a VGA cable, the color of the projected images are not good. When I use a USB cable, the projected image includes the presenter notes on my computer screen?

I am trying to connect a Macbook Pro to a projector for a Powerpoint presentation. When I use a VGA cable, the color of the projected images are not good. When I use a USB cable, the projected image includes the presenter notes on my computer screen?

To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
and select the Library that you moved. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Your first option didn't work because you imported one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
Your second option didn't work because you simply referenced her library on the old machine.
Regards
TD

Photoshop and elements 13 Working in iPhoto Want to edit image using photoshop elements Did the following IPhoto Preferences Advanced Edit Photos: In drop down menu chose in Photoshop Elements Also control click and chose edit in external editor Drop

Photoshop and elements 13
Working in iPhoto
Want to edit image using photoshop elements
Did the following
IPhoto>Preferences>Advanced>Edit Photos: In drop down menu chose in Photoshop Elements
Also control click and chose edit in external editor
Drop down menu edit photos in external program>photoshop Elements
Go to to the image I'm working on --- selected the image, the clicked on edit. When nothing happened I double clicked the image. Still elements didn't open. Then I opened the Elements editor, went back to iphoto and tried the entire process again. the photo still didn't open on Elements 13 for editing.
I have 3 Elements 13 books as well as looked on line--all my references say the exact same thing ---- iPhoto>Preferences>advanced>edit in external program>photoshop Elements
I uninstalled and reinstalled both iPhoto as well as Elements.
I spoke with application technical support. There appears to be nothing wrong with my copy of iPhoto. However there is no support from Adobe. I waited for over 1.5 hours for chat support several days ago, and finally gave up.

You are probably choosing the obvious file rather than the correct file as the PSE editor. The actual editor is hidden away inside the Support Files folder. The PSE file at the top level of the PSE folder in Applications is just an alias for the welcome screen and what you're describing is exactly what happens when you choose that. You want this one:

I have a sharepoint custom list with Title and image attachments, now i want to display image attachments in div based on the title.

hi,
i have a sharepoint custom list with Title and image attachments, now i want to display image attachments in div based on the title.

i am using the below code only
SPSite mySite = new SPSite("http://sharepoinsiteaddress");
SPWeb myweb = mySite.OpenWeb();
SPList myList = myweb.Lists["Announcements"];
SPListItem myListItem = myList.GetItemById(1);   foreach (String attachmentname in myListItem.Attachments)
String attachmentAbsoluteURL = myListItem.Attachments.UrlPrefix // gets the containing directory URL
+ attachmentname;
   // To get the SPSile reference to the attachment just use this code
  SPFile attachmentFile = myweb.GetFile(attachmentAbsoluteURL);
   // To read the file content simply use this code
   Stream stream = attachmentFile.OpenBinaryStream();    StreamReader reader = new StreamReader(stream);
   String fileContent = reader.ReadToEnd();
here i am using panel, how can i attach this attached image to panel

I have a color management problem. I have OS X v 10.5, Adobe Photoshop Elements 6, and an Epson Stylus Photo R800. I want to print images I have scanned on a Epson Perfection 1660 Photo and corrected in Photoshop and get the colors accurate.

i have a color management problem. I have OS X v 10.5, Adobe Photoshop Elements 6, and an Epson Stylus Photo R800. I want to print images I have scanned on a Epson Perfection 1660 Photo and corrected in Photoshop and get the colors accurate.

I used the ColorSync utility to verify, and it came back with this report:
/Library/Printers/EPSON/InkjetPrinter/PrintingModule/SPR800_Core.plugin/Contents /Resources/ICCProfiles/SPR800 Standard.icc
   Tag 'dmnd': Tag size is not correct.
/Library/Application Support/Adobe/Color/Profiles/Recommended/CoatedFOGRA27.icc
   Tag 'desc': Tag size is not correct.
/Library/Printers/EPSON/InkjetPrinter/ICCProfiles/Standard.profiles/Contents/Res ources/Epson IJ Printer.icc
   Tag 'dmnd': Tag size is not correct.
/Library/Printers/EPSON/InkjetPrinter/PrintingModule/SPR800_Core.plugin/Contents /Resources/
I did not know what to do next. At the bottom of the window it said to go to www.apple.com/colorsync to find a tutorial. I got a message saying that link does not work. Tried to find the tutorial by searching at apple.com, but could not seem to locate it. Does anyone know what the report above means and what I should do about it?
Also, how to find that tutorial?
Re Using RGB all the way through, When I print from Photoshop Elements, I select Adobe RGB, Photoshop Manages under "Color Handling", Relative Colometric under "Intent" and "ColorSync" i the Epson printer box. Do you mean to do something different in this sequence?

I want to embed images such that when we click an image in the pdf, another image appears as popup..

i have a pdf which deals about the description of the product. i want to start with an interface image and a link on the next line say 'Expand'. this link will open the interface image with larger resolution. i cant find a way to embed another image... i am not looking for rollover.. when i click the link, only then the image should appear as a popup...i have Adobe Acrobat Professional... but cnt find any relevant option for this task..
is there any javascript to call out this particular image when the link is clicked.
i just want the image to appear as a pop up and not another file.
Any help in this issue is highly appreciated.

Nasreen,
As Dave said, you can create a button to show/hide a layer.
You can also have a button that shows/hides another button.
First create a button with the image you want to make appear as its icon, and then hide it (Button properties > General > hidden)
Then create another button that shows/hides the first button when clicked (Button properties > Actions > show/hide a field action)
Michael

I want the projected image on the wall to just be the full screen of the slide

Similar Messages

Maybe you are looking for