I want the simple calendar shown in the zeen manual that has the date and time on it. Where is it?

I followed the recommendation on another post to link my google account for the calendar. So now I have a full month calendar but I want the one that's in the zeen user manual that has only the date and time. Can anyone tell me where I find that exact one? I've looked through the apps download section and found all sorts of things but nothing that's a calendar. I think it was there before the update was downloaded. At which time I had to link my google account to get anything. Also, has anyone else tried to get anything android on the zeen and get the message that you don't have an android compatible product? Don't know what that means. I'm trying to get myself into the 21st century but I'm not all tech or gadget savvy.

Bomberos wrote:
Personnaly i hate that calendar, i would like to have back my calendar, the old one, same one that it's on my ipad version 1. Is it possible?
No.
Suggestions here -> http://www.apple.com/feedback/

Similar Messages

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

Why is the screen from my Apple TV doesn't go past setting date and time and the screen stays black

My Apple TV screen turns on black and stays on setting date and time a few seconds after that it stays black but on light is still on and nothing else happens,I can't get it to do anything else!I just moved and have a new router and I think that might be the reason but I don't know! Please help!!!!

I have the same issue and seeking an answer...
I have already reset my ATV3 to factory defaults twice and connected it directly to the router, but the problem remains the same... BTW, I connected it to the two routers of two different networks I have at home... It reacts the same to both nw....
Any ideas?

Why can't I set the date and time insert to the format I want?

I would like the date to be formatted in the short form on my docs. However whenever I insert date and Time it always come out at the long form i.e.
Monday, 15 April 2013.
Right clicking allows me to edit it but the next time I inset it the long form re-appears.
I've tried to do it via the system preferences > language and text > region > customise route but the same thing thing happens. I choose the short form at the top of the choices but it still comes out in the long form on the docs.
Only a minor point but it is irritating 'cos it should be simple (probably is 'cept I'm a bit slow).
I'm running Mountain Lion 10.8.3
Thanks
W.

Wilfred. I found this in one of the More like this posts >>>>> opposite your first post. It might apply if you are on Pages 08. Insert Date/Time: Apple Support Communities
I would never have thought of double or right clicking on the date itself. I haven't tested it to see what formats exist. One last suggestion, if we don't resolve it here, write a new post and put it in the iWork pages columns. There you may meet up with the gurus in that persuasion.

The photos taken are not giving the date and time of it

The photos taken by iPhone doesnot provide any details such as date and time which is available in most of the other phones.

Hi Delumia,
Welcome to Nokia discussions board!
Thank you for your post, you can try this app. It lets you see many information on pictures.
Hope that helps
Sergent
If my response has helped you in any way, show it by hitting the WHITE STAR... If you don't a MONSTER will come and eat your lunch...
Also hit the Accept as solution button, so OTHERS can benefit from this helpful answer...
DON'T BE SHY...

TS1702 Cannot connect to store. Which reads a secure connection could not be established. Please check your date & time settings. What should i do if its already set to the right date and time?

Can not enter my apps store or itunes store. What should i do?

Turn the tables on the iTunes Store. Try this.
Go to Settings>General>Date and Time>Set Automatically>Off. Set the date one year ahead. Try to download the apps again. If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try again.

When I create a calendar, in iphoto 8, I had an information pane lower left corner with date and time of the picture. Can it possibly be that the iphoto developers forgot about that in iphoto 9? This was very helpful when placing images according to date.

Today I updated to the latest iphoto version. The update itself went smooth and nice as one is used to from Apple. But when I wanted to finish my already started calendar, I have encountered two problems. The first is that I can't view the aperture library anymore directly from iphoto. Instead I have to open the iphtoto library in aperture but then my calendar isn't there. So now I have to copy images back and forth. No problem.
However, the old iphoto had a small information area in the lower left corner which was very nice to place images on an exact date. This seems to be gone...?? Really? How am I supposed to sort images according to date and time when I have to back to the library view every time? That's not very convenient..Or am I missing something?
Thanks for ANY help!
Patrick

The first is that I can't view the aperture library anymore directly from iphoto.
THat is exceeding strange since iPhoto '08 could not open or share an Aperture library - that ability was first introduced in iPhoto '11 - with the latest version of iPhoto and or Aperture you can open the same library with either application - http://support.apple.com/kb/HT5043
In the current version of iPhoto the photos are sorted by date in the film strip - I've not recently done a calendar so do not remember the specifics -
LN

Is there any calendar /contact program that has the depth of power-on Now up-to-date that will run on Lion?

is there any calendar /contact program that has the depth of power-on Now up-to-date that will run on Lion?

This can be done easily with ethernet.
Please follow the instructions strictly.
To make it easier I want you to do this overnight so you can turn off all your current connection to the internet.
Just go to the airport fan in to the top right and turn airport off.
Get ethernet cable and connect the laptop to the TC lan port.. ie <-> ones.
Press and hold the reset on the TC for about 10sec. until the front led flashes rapidly.
Open the airport utility.. go to manual setup and change the wireless to off. (so other people around you cannot join your network of one).
Ignore all the errors.. they won't stop the backup working.
Go to the TM and reselect the backup target disk as the TC.
It should start after 2min and run through to completion.
That is it.. for a backup of many GB it might take a few hours.. so make sure the laptop has power plugged in and the sleep is off.. (on early ones I think this is needed but I am a late arrival to the scene).. sleep doesn't affect later OS.

Hi when i open my application folder, all the application is shown in trash folder. when i click the application it says this app is in trash first move it out. and when i try to open through finder go it says this file doesn't exist. can some1 plz help?

hi when i open my application folder, all the application is shown in trash folder. when i click the application it says this app is in trash first move it out. and when i try to open through finder> go it says this file doesn't exist. can some1 plz help? how can i put all my application through application folder?

Something really odd is going on. In your first screen shot, I noticed that the Applications folder does not have the proper icon displayed in the side bar. Also, in the title bar it lists it as Applications 08-59-29-909.
Not sure where it's picking up that odd name, unless it's because it's still truly within the Trash folder.
Try this. In the Finder > Preferences > General > turn on "Always open folders in a new window". (I have a feeling you have the default setting with this off).
Now, in Finder > Go > move down and open the Applications Folder from there. Now open the folder where you see all your applications that you show in your screen shot, select all, and move them to this true appliactions folder.
This is what you should properly seeing (but with different apps listed):
See how the Applications folder has the icon of the letter A shaped with a pencil, ruler & pen.

TS4088 I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase o

I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one? Also, the software is not updated as the computer hasn't worked for about 2 months.
Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well? It is not saved in the cloud.
Thanks for your help, it is much appreciated.

You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line

HT1382 how can I restore my back up files from my laptop? i want to see the dates and time that I backed up my files. is it posssible?

how can I restore my back up files from my laptop? i want to see the dates and time that I backed up my files. is it posssible?

What backed up files?
Available backups for an iOS device can be found in Edit > Preferences > Devices.

CR 8.5, how can I pass just the date, when it wantes date and time?

I have a stored procedure that is passes a date parameter.
When CR prompts me for the date, it also wants the time.
Either I have to pass CR the time of get CR to just look at the date.
When I run the report with a date and time, CR returns no records.
When I run the SP in a SQL query with just the date, it returns data.
I'm CR 8.5 and MS SQL Server 2005
Any advice would be appreciated.
Thanks
Kelvin

You can pass the parameter values as follows for datetime.
01/31/2008 00:00:00 which will returns the data in the report.
If you either not interested to pass the time everytime, you can achieve it through Add Command option in the datasource expert and trigeer the SP. (i'm not sure Add Command is available with CR 8.5)
Hope this helps!!

HT201272 How do i see a list of the apps that have been downloaded and the dates and times and amounts? Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill. HELP!!

How do i see a list of the apps that have been downloaded and the dates and times and amounts? Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill. HELP!!

See this -> http://support.apple.com/kb/HT2727

I have a 4s Iphone and want to add a date and time stamp to photos taken on the regular camera installed on the phone. Does this require a separate app?

I have a 4s iphone and want to date and time stamp photos taken with the regular camera installed on the phone. Does this require a separate app?

For such to be visible, yes. Many such apps in the app store.

In the numbers app, using the "date and time" function, is it possible to remove the time? I need to put together a list of dates, but I don't need or want times.

In the numbers app, using the "date and time" function, is it possible to remove the time? I need to put together a list of dates, but I don't need or want times.

When formatting your column to date/time, pick Date & time, and then pick the letter i in the circle to the right. Then scroll down and pick "No time"
Jason

I want the simple calendar shown in the zeen manual that has the date and time on it. Where is it?

Similar Messages

Maybe you are looking for