I want the title can connect to an iview or page

Hello:
    In web page composer ,I am now create an teaser site content
    I want the title can connect to an iview or page under content administration
    In the Teaser Editor ,there is a Item Link ,but I can't connect a iview by this function.
someone can  help me
thank you very much
lexian

I have the same problem too.

Similar Messages

  • Windows Server 2012 Foundation, in a Workgroup - "The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller"...

    Every few days we see two dialogs with the following messages:
    Dialog 1, title: Check for Licensing Compliance is Incomplete
    The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller.
    Dialog 2, title: Check for Licensing Compliance is Incomplete
    The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliance check cannot be completed, the server will automatically shut
    down in 8 day(s) 23 hour(s) 0 minute(s).
    The server is not (and never has been) joined to a domain or had any DC roles installed. In fact its still connected to the default Workgroup.
    The server was configured in our office and never showed this message until it was installed on site. The main difference from what I can see is that when installed on site it was given a static IP address and does not have any DNS settings in the network
    adapter properties. 
    I have scoured a number of forums on this error but in almost every other instance of this error message the servers are connected to a Domain Controller and the solutions generally are linked to dis-joining and rejoining the domain. Unfortunately this is
    not an option for this scenario.
    I initially thought that adding some relevant DNS server IP address may resolve the issue, however, we have the exact same model server configured exactly the same running at a different site that does not experience this problem. This server also has no
    DNS server configured.
    I have seen a post that suggests turning off the servers "Foundation Checking", but I'm unsure how to do this.

    Thanks for your response Vivian.
    I can confirm that this server is not (and never has been) a member of any active directory, it is configured as a Workgroup server. It was initially configured on a network that does have an active directory, but was never joined to it. During that time it
    never displayed these messages.
    The server was moved into production on a different site and network and setup with a static IP address.The site network does have its own active directory but the server was not joined to it. It is whilst on this new network that these messages began.
    Since my original post DNS servers have been added and the Microsoft activation has been verified, however, the messages are still appearing.
    There are only 2 user accounts configured on this server. The local admin account and another local admin user.
    The remote desktop services roles have been installed but not yet configured. I don't think that has any bearing on this scenario though.
    The description of this error in the above "Introduction to Windows Server 2012 Foundation" link states:
    This error occurs when the server cannot finish checking the requirements for the root domain, forest trust configuration, or both. It usually happens when the server cannot connect to a domain controller. If the situation persists, the server will
    shut down 10 days after the first time the compliance check failed. Each time this error message occurs, it will state the actual time remaining before the server will shut down. If you restart the server after it has shut down because of non-compliance, the
    server will shut itself down again in 3 days.
    The above description leads me to the following question - In a Workgroup environment, does the server still try to contact a domain controller to establish a level of trust? If this is the case could it be that the server can no longer see the initial DC
    on its new network and this is what is triggering the messages?
    Am I clutching at straws here?

  • I want the title on the browser to change when one of the frames changes in the Frameset.

    I am using frames (please don't tell me off!) and PHP.
    I want the title on the browser to change when one of the
    frames changes in the Frameset.
    Normally the title of the browser comes from the Frameset,
    But I am sure I have seen websites where the title changes
    depending on one of the frames... how is this done?
    C

    Then don't use frames.
    > Normally the title of the browser comes from the
    Frameset, But I am sure I
    > have seen websites where the title changes depending on
    one of the
    > frames...
    > how is this done?
    Show us one and we'll tell you.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "colinwalton" <[email protected]> wrote in
    message
    news:epuu1t$kgv$[email protected]..
    >I am using frames (please don't tell me off!) and PHP.
    >
    > I want the title on the browser to change when one of
    the frames changes
    > in
    > the Frameset.
    >
    > Normally the title of the browser comes from the
    Frameset, But I am sure I
    > have seen websites where the title changes depending on
    one of the
    > frames...
    > how is this done?
    >
    > C
    >

  • Server 2012 R2 RDS- Only want the Session Host, Connection Broker and Licensing Server!

    Hi all,
    Wondering if anyone has experience with implementing Remote Desktop Services (RDS) on Windows Server 2012 R2.
    I am doing an RDS design for a platform where we only need an RDS Session Host, Licensing Server and Connection Broker. We do not need web access as these servers will simply be jump boxes internally!
    However, implementing this correctly in our test environment has proved to be tricky. The options are:
    Use the Server Manager and do a traditional install via Roles and Features ( specifically add the Session Host, Licensing Server and Connection Broker). The installation process seems to go through ok in this scenario but when I head over to the Remote
    Desktop Services section of the Server Manager I simply get the message 'An RDS Deployment does not exist in the server pool. To create a deployment head to Roles and Features'.
    Use the specific ‘Remote Desktop Services installation’ option on the Server Manager and do a Session Based Desktop deployment and Quick Start. This installation process seems to go through correctly and the Remote Desktop Section seems to be working
    correctly via the Server Manager. However this process is ‘hard locked’ i.e. it installs the session host, web access and connection broker. I can then remove the web access component later from Roles/ Features.
    Is there a best practice (if any) for installation? i.e. Will there be any issues down the line if I remove RDS Web Access from my server while following method 2?
    There is a complete lack of documentation from Microsoft here so not sure what to do! Just need a basic RDS session based deployment.

    Hi,
    As I know from server 2012\R2 the best deployment skill is to perform via “Remote Desktop Services” installation mode with Standard deployment and don’t let single role to install. Because when we install through RDS mode, there are specific extra tools and
    services activated along with that deployment which you can’t find with single role installation. And that is for sure, when we install RDS role as of this, by default we will get install RDCB, RDSH and RDWA role installed.
    Sorry don’t have any option to try to remove that role as that role basically needed for RemoteApp and Desktop purpose. But if you want then you can try it with help of “Remove-RDServer”Powershell command.
    https://technet.microsoft.com/en-us/library/jj215506.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • HT4168 epub: I'd like to create chapters for the TOC but don't want the new chapter to begin on a new page. I'd like it to begin on the same page as the prior chapter. How can I do that?

    How can I do this? I currently have my TOC chapters listed as Apples, Oranges, and so on.  But my text chapters begin something like this:
    1
    Apples
    2
    Oranges
    I have "Apples" with header 1, "Oranges" with header 1, etc., so that very nicely in the TOC it is listing my topics as the chapters. However, within the body of the document, 1 appears on one page and "Apples" begins at the top of a new page, separated from "1"; 2 appears one one page and "Oranges" appears at the top of the next page (separated from the "2), and so on.
    Because of the way the book is structured, I need to have the chapter numbers on a top line and the chapter topic beneath it. (The book is further subdivided, such as 1.3a, 1.3b, etc.)
    What I would like is for the TOC to indicate my chapters as Apples, Oranges, etc., but for the chapter text to begin as indicated above.
    How can I do this?  Thanks.

    Peter, I styled the wording of the chapter title (e.g. apples) with my heading1 styling and my sub-chapter titles were heading2. The text is a different font, different color, different size, different everything.  It seems that the epub program has an automatic format to start a new page with each new header. That's what I'm trying to work around. (Originally I styled both the numeral and the chapter title as "heading 1" and it gave each a different page!)
    I am in the process of removing all headers and styling everything manually (which is how it was originally) just to avoid this problem.
    I'm having my e-book done through a publisher (this will be self-published), so I'll be giving them a .docx and they'll convert it to .html (filtered) then .epub. so I need something that creates my Table of Contents as I'd like it, without messing up the text of the book.
    I can give them a list of what I want in the Table of Contents, and have them manually do it, but the TOC may or may not come out how I want it to come out. My preference is to have something automatic. I wanted the sub-units (heading 2) in the TOC but that will never work since I have over 200 of them and it's too much for them to do manually.  It's a very slow process.

  • My iPod is working but the charger won't go all the way in the charger slot to recharge it,someone please tell me want the problem can be. How can I fix this. Thank you

    MMy iPod is workin,but my charger no longer fixes all the way in the  slot to recharge it. Want should I do. Thank you

    Hey Lynette1234, As UbuntuXP stated check and clean the port of foreign debris. Lint packed in the bottom of the charging port is most often the problem, This seems to be more of an issue with the lighting ports used on the iPod 5. The following will help you clear / clean the lighting port on an iPod 5. Try using a strong light and a magnifying glass to look into the port, using a soft brush to carefully remove any debris, if you must a non-conductive probe may be needed, I find a round wooden toothpick work well. Avoid touching or bending the gold contact pins on the long side of the port. Damage them and you will have a costly repair. Also, make sure the silver lock springs (looks like silver bump on each end) on the short sides of the port are free to move, if not clear the debris. If the older 30 pin type, same thing avoid touching, bending the contacts, and remove all foreign debris. Many report a soft toothbrush works well or a toothpick. Avoid using solvents if the contact pins appear corroded, generally plugging / plugging the charger end , about 12 times will clean dirty contacts. If you must, a cotton swab cut to fit the port with a drop of 91% isopropyl alcohol on it, (you want the swab damp, NOT wet or dripping), will remove most any corrosion. simply run the swab in and out as if you were plugging it in until the swab comes out clean. May need to use more than one swab. But check for lint / foreign debris first. Good luck. Cheers.

  • HT2729 i downloaded a book when I actually wanted the audiobook can I get my money back from the book?

    I tried to buy a audiobook and accidentally bought the book can I return the book and get my money back?

    Try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that audiobook, click the arrow to the left of it, click the 'Report a Problem' button :
    and then the 'Report a Problem' link on its line :
    and select 'inadvertently purchased' (I'm assuming that there is 'inadvertent' option for audiobooks, there is for apps and music) as the problem and fill in the details (iTunes support should reply within, I think, about 24 hours).

  • Rename the title of an tabstrip of an overview page

    Hi all together,
    I have an overviepage (shown as a view with tabstrips) and I need to rename one of these tabstrips at runtime.
    I tried to redefine IF_BSP_WD_HISTORY_STATE_DESCR~GET_STATE_DESCRIPTION of this view but this method is never called.
    Do you have any other suggestions???
    Thanks,
    TW

    You cannot rename the PDF files in the iBooks app on the iPad. In theory, this should work (copied from another discussion)
    If the PDFs appear in iTunes (they would be in the Books section of the iTunes Library) then you can change the title by selecting each PDF, File->Get Info from the main menu and change the Name in the Info tab.  Then sync the newly titled PDFs back to the iPad.
    If that does not work, you could copy the PDF files to your hard drive, rename them on the computer - but not within iTunes, drag them back into your iTunes library, and then sync again.
    I really don't know of a shorter or more direct way of renaming the files. You may be able to rename PDF files in apps that let you edit or annotate PDF files, but I don't have any of those apps, so I can't speak with any certainty about it.

  • I want the complete JDBC Connection details

    Hi
    I want to have a complete JDBC Connection like how to insert records, update/edit records and deleting records. Do u know a website or can anybody give an entire code having all the functions of JDBC.

    I'm a Nigerian diplomat. If you send me a check for $1000 USD I'll send you $1M and all those code samples.
    It'd be better for you to go read and try them yourself. They're not that hard.
    It'd also be better for you not to be so demanding. This is a volunteer forum, and nobody owes you anything. Your manners are appalling.
    %

  • The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliant check cannot be completed, the server will automatically shut down in 0

    i need a help. I am new in company and have to solve this problem.
    My colleague did a migration from Small Business server 2003 to Foundation 2008, about 1 year ago. After few days, he got this error message in title. Server turn off about once a month. He worked following:
    joined new server Foundation to the Domain
    dcpromo on new Server
    migration (he said that he worked step-by-step with tutorial)
    demote on old Server SBS 2003
    disconnect old server from domain. This old is not in function now.
    New server have just 3 computer accounts. The Forest functional level is Server 2003.
    I've did dcdiag:
    C:\Users\Administrator>slmgr.vbs /dli
    C:\Users\Administrator>dcdiag
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = server2008
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\SERVER2008
          Starting test: Connectivity
             ......................... SERVER2008 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\SERVER2008
          Starting test: Advertising
             ......................... SERVER2008 passed test Advertising
          Starting test: FrsEvent
             ......................... SERVER2008 passed test FrsEvent
          Starting test: DFSREvent
             ......................... SERVER2008 passed test DFSREvent
          Starting test: SysVolCheck
             ......................... SERVER2008 passed test SysVolCheck
          Starting test: KccEvent
             ......................... SERVER2008 passed test KccEvent
          Starting test: KnowsOfRoleHolders
             ......................... SERVER2008 passed test KnowsOfRoleHolders
          Starting test: MachineAccount
             ......................... SERVER2008 passed test MachineAccount
          Starting test: NCSecDesc
             ......................... SERVER2008 passed test NCSecDesc
          Starting test: NetLogons
             ......................... SERVER2008 passed test NetLogons
          Starting test: ObjectsReplicated
             ......................... SERVER2008 passed test ObjectsReplicated
          Starting test: Replications
             ......................... SERVER2008 passed test Replications
          Starting test: RidManager
             ......................... SERVER2008 passed test RidManager
          Starting test: Services
             ......................... SERVER2008 passed test Services
          Starting test: SystemLog
             A warning event occurred.  EventID: 0x8000001D
                Time Generated: 03/08/2012   09:59:45
                Event String:
                The Key Distribution Center (KDC) cannot find a suitable certificate
     to use for smart card logons, or the KDC certificate could not be verified. Sma
    rt card logon may not function correctly if this problem is not resolved. To cor
    rect this problem, either verify the existing KDC certificate using certutil.exe
     or enroll for a new KDC certificate.
             An error event occurred.  EventID: 0xC0001B61
                Time Generated: 03/08/2012   10:09:56
                Event String:
                A timeout was reached (30000 milliseconds) while waiting for the Liv
    eUpdate service to connect.
             An error event occurred.  EventID: 0xC0001B58
                Time Generated: 03/08/2012   10:09:56
                Event String:
                The LiveUpdate service failed to start due to the following error:
             ......................... SERVER2008 failed test SystemLog
          Starting test: VerifyReferences
             ......................... SERVER2008 passed test VerifyReferences
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test
             CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test
             CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : BREG
          Starting test: CheckSDRefDom
             ......................... BREG passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... BREG passed test CrossRefValidation
       Running enterprise tests on : BREG.local
          Starting test: LocatorCheck
             ......................... BREG.local passed test LocatorCheck
          Starting test: Intersite
             ......................... BREG.local passed test Intersite
    C:\Users\Administrator>
    I did nslookup:
    C:\Users\Administrator>nslookup
    Default Server:  UnKnown
    Address:  ::1
    and this:
    C:\Users\Administrator>ntdsutil
    ntdsutil: roles
    fsmo maintenance: connections
    server connections: connect to server server2008
    Binding to server2008 ...
    Connected to server2008 using credentials of locally logged on user.
    server connections: q
    fsmo maintenance: select operation target
    select operation target: list roles for connected server
    Server "server2008" knows about 5 roles
    Schema - CN=NTDS Settings,CN=SERVER2008,CN=Servers,CN=Default-First-Site-Name,CN
    =Sites,CN=Configuration,DC=BREG,DC=local
    Naming Master - CN=NTDS Settings,CN=SERVER2008,CN=Servers,CN=Default-First-Site-
    Name,CN=Sites,CN=Configuration,DC=BREG,DC=local
    PDC - CN=NTDS Settings,CN=SERVER2008,CN=Servers,CN=Default-First-Site-Name,CN=Si
    tes,CN=Configuration,DC=BREG,DC=local
    RID - CN=NTDS Settings,CN=SERVER2008,CN=Servers,CN=Default-First-Site-Name,CN=Si
    tes,CN=Configuration,DC=BREG,DC=local
    Infrastructure - CN=NTDS Settings,CN=SERVER2008,CN=Servers,CN=Default-First-Site
    -Name,CN=Sites,CN=Configuration,DC=BREG,DC=local
    select operation target:
    Did also slmgr.vbs /dli and got:
    name:Windows Server(R) ServerWinFoundation edition
    Description: Windows operating System - Windows Server(R),
    OEM_COA_NSLP channel
    Partial product key:.......
    License Status:Licensed
    thanks for help, in advance

    I forgot to say that it is the only DC in the domain.
    and this is DNS test
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       * Verifying that the local machine server2008, is a Directory Server.
       Home Server = server2008
       * Connecting to directory service on server server2008.
       * Identified AD Forest.
       Collecting AD specific global data
       * Collecting site info.
       Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=BREG,DC=local,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
       The previous call succeeded
       Iterating through the sites
       Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BREG,DC=local
       Getting ISTG and options for the site
       * Identifying all servers.
       Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=BREG,DC=local,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
       The previous call succeeded....
       The previous call succeeded
       Iterating through the list of servers
       Getting information for the server CN=NTDS Settings,CN=SERVER2008,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BREG,DC=local
       objectGuid obtained
       InvocationID obtained
       dnsHostname obtained
       site info obtained
       All the info for the server collected
       * Identifying all NC cross-refs.
       * Found 1 DC(s). Testing 1 of them.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\SERVER2008
          Starting test: Connectivity
             * Active Directory LDAP Services Check
             Determining IP4 connectivity
             * Active Directory RPC Services Check
             ......................... SERVER2008 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\SERVER2008
          Test omitted by user request: Advertising
          Test omitted by user request: CheckSecurityError
          Test omitted by user request: CutoffServers
          Test omitted by user request: FrsEvent
          Test omitted by user request: DFSREvent
          Test omitted by user request: SysVolCheck
          Test omitted by user request: KccEvent
          Test omitted by user request: KnowsOfRoleHolders
          Test omitted by user request: MachineAccount
          Test omitted by user request: NCSecDesc
          Test omitted by user request: NetLogons
          Test omitted by user request: ObjectsReplicated
          Test omitted by user request: OutboundSecureChannels
          Test omitted by user request: Replications
          Test omitted by user request: RidManager
          Test omitted by user request: Services
          Test omitted by user request: SystemLog
          Test omitted by user request: Topology
          Test omitted by user request: VerifyEnterpriseReferences
          Test omitted by user request: VerifyReferences
          Test omitted by user request: VerifyReplicas
          Starting test: DNS
             DNS Tests are running and not hung. Please wait a few minutes...
             See DNS test in enterprise tests section for results
             ......................... SERVER2008 passed test DNS
       Running partition tests on : ForestDnsZones
          Test omitted by user request: CheckSDRefDom
          Test omitted by user request: CrossRefValidation
       Running partition tests on : DomainDnsZones
          Test omitted by user request: CheckSDRefDom
          Test omitted by user request: CrossRefValidation
       Running partition tests on : Schema
          Test omitted by user request: CheckSDRefDom
          Test omitted by user request: CrossRefValidation
       Running partition tests on : Configuration
          Test omitted by user request: CheckSDRefDom
          Test omitted by user request: CrossRefValidation
       Running partition tests on : BREG
          Test omitted by user request: CheckSDRefDom
          Test omitted by user request: CrossRefValidation
       Running enterprise tests on : BREG.local
          Starting test: DNS
             Test results for domain controllers:
                DC: server2008.BREG.local
                Domain: BREG.local
                   TEST: Authentication (Auth)
                      Authentication test: Successfully completed
                   TEST: Basic (Basc)
                      The OS
                      Microsoft Windows Server 2008 R2 Foundation  (Service Pack level: 1.0)
                      is supported.
                      NETLOGON service is running
                      kdc service is running
                      DNSCACHE service is running
                      DNS service is running
                      DC is a DNS server
                      Network adapters information:
                      Adapter
                      [00000007] Intel(R) 82566DM-2 Gigabit Network Connection:
                         MAC address is 00:19:99:86:E9:62
                         IP Address is static
                         IP address: 192.168.1.250
                         DNS servers:
                            192.168.1.250 (server2008.breg.local.) [Valid]
                            127.0.0.1 (server2008.breg.local.) [Valid]
                      The A host record(s) for this DC was found
                      The SOA record for the Active Directory zone was found
                      The Active Directory zone on this DC/DNS server was found primary
                      Root zone on this DC/DNS server was not found
                   TEST: Forwarders/Root hints (Forw)
                      Recursion is enabled
                      Forwarders are not configured on this DNS server
                      Root hint Information:
                         Name: a.root-servers.net. IP: 198.41.0.4 [Valid]
                         Name: a.root-servers.net. IP: 2001:503:ba3e::2:30 [Invalid (unreachable)]
                         Name: b.root-servers.net. IP: 192.228.79.201 [Valid]
                         Name: c.root-servers.net. IP: 192.33.4.12 [Valid]
                         Name: d.root-servers.net. IP: 128.8.10.90 [Valid]
                         Name: d.root-servers.net. IP: 2001:500:2d::d [Invalid (unreachable)]
                         Name: e.root-servers.net. IP: 192.203.230.10 [Valid]
                         Name: f.root-servers.net. IP: 192.5.5.241 [Valid]
                         Name: f.root-servers.net. IP: 2001:500:2f::f [Invalid (unreachable)]
                         Name: g.root-servers.net. IP: 192.112.36.4 [Valid]
                         Name: h.root-servers.net. IP: 128.63.2.53 [Valid]
                         Name: h.root-servers.net. IP: 2001:500:1::803f:235 [Invalid (unreachable)]
                         Name: i.root-servers.net. IP: 192.36.148.17 [Valid]
                         Name: i.root-servers.net. IP: 2001:7fe::53 [Invalid (unreachable)]
                         Name: j.root-servers.net. IP: 192.58.128.30 [Valid]
                         Name: j.root-servers.net. IP: 2001:503:c27::2:30 [Invalid (unreachable)]
                         Name: k.root-servers.net. IP: 193.0.14.129 [Valid]
                         Name: k.root-servers.net. IP: 2001:7fd::1 [Invalid (unreachable)]
                         Name: l.root-servers.net. IP: 199.7.83.42 [Valid]
                         Name: l.root-servers.net. IP: 2001:500:3::42 [Invalid (unreachable)]
                         Name: m.root-servers.net. IP: 2001:dc3::35 [Invalid (unreachable)]
                         Name: m.root-servers.net. IP: 202.12.27.33 [Valid]
                   TEST: Delegations (Del)
                      Delegation information for the zone: BREG.local.
                         Delegated domain name: _msdcs.BREG.local.
                            DNS server: server2008.breg.local. IP:192.168.1.250 [Valid]
                   TEST: Dynamic update (Dyn)
                      Warning: Failed to add the test record dcdiag-test-record in zone BREG.local
                      [Error details: 9017 (Type: Win32 - Description: DNS bad key.)]
                      Test record dcdiag-test-record deleted successfully in zone BREG.local
                   TEST: Records registration (RReg)
                      Network Adapter
                      [00000007] Intel(R) 82566DM-2 Gigabit Network Connection:
                         Matching CNAME record found at DNS server 192.168.1.250:
                         cb30439d-35e0-4add-ae6c-e7f281295520._msdcs.BREG.local
                         Matching A record found at DNS server 192.168.1.250:
                         server2008.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _ldap._tcp.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _ldap._tcp.221dc40b-9d51-48cf-a3a3-e3daf251197f.domains._msdcs.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _kerberos._tcp.dc._msdcs.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _ldap._tcp.dc._msdcs.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _kerberos._tcp.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _kerberos._udp.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _kpasswd._tcp.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _ldap._tcp.Default-First-Site-Name._sites.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _kerberos._tcp.Default-First-Site-Name._sites.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _ldap._tcp.gc._msdcs.BREG.local
                         Matching A record found at DNS server 192.168.1.250:
                         gc._msdcs.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _gc._tcp.Default-First-Site-Name._sites.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _ldap._tcp.pdc._msdcs.BREG.local
                         Matching CNAME record found at DNS server 192.168.1.250:
                         cb30439d-35e0-4add-ae6c-e7f281295520._msdcs.BREG.local
                         Matching A record found at DNS server 192.168.1.250:
                         server2008.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _ldap._tcp.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _ldap._tcp.221dc40b-9d51-48cf-a3a3-e3daf251197f.domains._msdcs.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _kerberos._tcp.dc._msdcs.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _ldap._tcp.dc._msdcs.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _kerberos._tcp.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _kerberos._udp.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _kpasswd._tcp.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _ldap._tcp.Default-First-Site-Name._sites.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _kerberos._tcp.Default-First-Site-Name._sites.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _ldap._tcp.gc._msdcs.BREG.local
                         Matching A record found at DNS server 192.168.1.250:
                         gc._msdcs.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _gc._tcp.Default-First-Site-Name._sites.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.BREG.local
                         Matching  SRV record found at DNS server 192.168.1.250:
                         _ldap._tcp.pdc._msdcs.BREG.local
             Summary of test results for DNS servers used by the above domain
             controllers:
                DNS server: 2001:500:1::803f:235 (h.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:500:1::803f:235              
    [Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
                DNS server: 2001:500:2d::d (d.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:500:2d::d              
    [Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
                DNS server: 2001:500:2f::f (f.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:500:2f::f              
    [Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
                DNS server: 2001:500:3::42 (l.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:500:3::42              
    [Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
                DNS server: 2001:503:ba3e::2:30 (a.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:503:ba3e::2:30              
    [Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
                DNS server: 2001:503:c27::2:30 (j.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:503:c27::2:30              
    [Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
                DNS server: 2001:7fd::1 (k.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:7fd::1              
    [Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
                DNS server: 2001:7fe::53 (i.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:7fe::53              
    [Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
                DNS server: 2001:dc3::35 (m.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:dc3::35              
    [Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
                DNS server: 128.63.2.53 (h.root-servers.net.)
                   All tests passed on this DNS server
                DNS server: 128.8.10.90 (d.root-servers.net.)
                   All tests passed on this DNS server
                DNS server: 192.112.36.4 (g.root-servers.net.)
                   All tests passed on this DNS server
                DNS server: 192.168.1.250 (server2008.breg.local.)
                   All tests passed on this DNS server
                   Name resolution is functional._ldap._tcp SRV record for the forest root domain is registered
                   DNS delegation for the domain  _msdcs.BREG.local. is operational on IP 192.168.1.250
                DNS server: 192.203.230.10 (e.root-servers.net.)
                   All tests passed on this DNS server
                DNS server: 192.228.79.201 (b.root-servers.net.)
                   All tests passed on this DNS server
                DNS server: 192.33.4.12 (c.root-servers.net.)
                   All tests passed on this DNS server
                DNS server: 192.36.148.17 (i.root-servers.net.)
                   All tests passed on this DNS server
                DNS server: 192.5.5.241 (f.root-servers.net.)
                   All tests passed on this DNS server
                DNS server: 192.58.128.30 (j.root-servers.net.)
                   All tests passed on this DNS server
                DNS server: 193.0.14.129 (k.root-servers.net.)
                   All tests passed on this DNS server
                DNS server: 198.41.0.4 (a.root-servers.net.)
                   All tests passed on this DNS server
                DNS server: 199.7.83.42 (l.root-servers.net.)
                   All tests passed on this DNS server
                DNS server: 202.12.27.33 (m.root-servers.net.)
                   All tests passed on this DNS server
             Summary of DNS test results:
    Auth Basc Forw Del  Dyn  RReg Ext
                Domain: BREG.local
                   server2008                   PASS PASS PASS PASS WARN PASS n/a  
             ......................... BREG.local passed test DNS
          Test omitted by user request: LocatorCheck
          Test omitted by user request: Intersite

  • I'm using firefox version 4 in my network and i want the clients can't change my network proxy that we are using i did it in previous version but it doesn't work in version 4, so how can i do it?

    I've network in my company and installing internal web proxy that allow clients to connect to the internet (ISA 2004). i'm using the Firefox as default browser in my network. so what i need that no one in my network clients can't change the proxy settings or it just be dimmed. i did it in the previous version but when i try the steps in version 4 it doesn't work so I'm asking for solution for that.
    many thanks for help,
    Ahmed Khairy

    Leliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
    For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • 'm using firefox version 4 in my network and i want the clients can't change my network proxy that we are using i did it in previous version but it doesn't work in version 4, so how can i do it?

    ''locking as a duplicate of this thread - https://support.mozilla.com/en-US/questions/827625''
    I've network in my company and installing internal web proxy that allow clients to connect to the internet (ISA 2004). I'm using the Firefox as default browser in my network. so what i need that no one in my network clients can't change the proxy settings or it just be dimmed. i did it in the previous version but when i try the steps in version 4 it doesn't work so I'm asking for solution for that.
    many thanks for help,
    Ahmed Khairy

    Leliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
    For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • I got the Beats Pill but when I plug the wire from the pill into my phone the music will only play from the headset and the bluetooth can connect but not work, how do I get this fixed?

    I'm really annoyed because I wouldn't have spent over £100 on a speaker if my phone wouldn't allow it to connect

    You may want to start here.
    http://www.beatsbydre.com/support/

  • Working with a projector file. How can center it, not allow scaling and change the title bar?

    I've tried using:
    import flash.system.fscommand;
    fscommand("allowscale", "false");
    fscommand("showmenu", "false");
    fscommand("fullscreen", "false");
    on frame 1, but they don't seem to work.  I'm going to be putting this project on a CD and the client wants to make sure it will open centered on the user's screen, which has not been the case so far.  It seems to open at different spots on different computers.
    They also want the title bar changed from "Adobe Flash Player 10" to their own title.
    Thanks in advance for the help.

    hkunz219 wrote:
    You can use: stage.scaleMode = StageScaleMode.NO_SCALE; As for the title bar change, you can change the title bar string using Resource Hacker. But i am not sure if that is legal. You will find the strings under the strings table.
    What did you mean by, "You will find the strings under the strings table."?  Were you talking about Resource Hacker?

  • Even though I can connect to the app store, apps rarely will download.

    Even though the iPad can connect to the app store, apps and updates do not download (except occasionally). 
    The error message is "Cannot connect to the iTunes store."  Obviously there is something wrong with that error message, since the iPad actually connects to the store in order to attempt installing an app or update.
    I have tried changing networks, changing locations, rebooting the iPad, turning WiFi off and back on and downloading updates instead of new apps, but the fact is that apps and updates will rarely download.  I have gone through every troubleshooting item in http://support.apple.com/kb/TS1368, http://support.apple.com/kb/ts1424, http://support.apple.com/kb/TS1398, although I found that almost all of it does not refer to my problem.  I also tried everyting in an advanced iTunes troubleshooting document I can no longer find.  The fact that it works some of the time seems to eliminate most of the troubleshooting steps, which assume the problem is not intermittent.
    This started several weeks ago. Before that, I had no problems dowloading and installing apps.  The problem started abruptly.  At first apps would download maybe 75-80% of the time, but lately, it has gotten rediculous.  The successful download is highly intermittent.  Apps and updates will download maybe one in 20 attempts or so.
    This is an iPad 2 running iOS 5.01.
    If anyone can give me some ideas how to proceed here, I'd really appreciate it!

    jnreeves324, We're eager to get you connected to your App store! It looks like you're taking great steps in trying to resolve this. Have you recently changed your Apple ID or connected your phone to your PC using iTunes? Here's a link that will help further with further troublshooting options for being unable to access the iTunes Store on your computer or iOS device: http://spr.ly/6580fmpn.
    TanishaS_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Maybe you are looking for