I want to acheive digitally triggered data acquisition and using AIO lines for triggering connecting to PFI lines but no response.

How to acheive digital data acquisitions using AO signals as trigger signal.

Greetings,
I am not sure that I have a clear understanding of your question. It appears that you want to perform a triggered acquisition. You mentioned both analog input (AI) and analog output (AO). Which type of operation are you performing? Are you using digital or analog triggering? Also, it would be helpful if you could mention what hardware and software you are using.
Spencer S.

Similar Messages

Problem with data acquisition and motion control

I have PCI-6024E and PCI-7342 cards on a single PC. Servo motion control works fine when it goes alone or is accompanied by one point data acquisition in a while loop, but when I start data acquisition with specified sample rate, the motor moves with breaks.
Does anybody know what is the problem? Is it possible to fix it?

How are you performing your motion? Is it a position move or a velocity move? How are your triggering the data acquisition? Using breakpoints on the 7342? If so, are you using single breakpoints or modulo? How are you configuring the data acquisition rate? Are you triggering just the start to the acquisition and the unsing the daq scan clock or are you using the motion controller to send the scan clock itself?

Z600 workstation missing pci data acquisition and signal processing controller driver

I just installed Win7 Pro x86 on my Z600 workstation. It was an upgrade from WinXP Pro. In Device Manager I am missing the driver for the PCI Data Acquisition and Signal Processing Controller and Hardlock USB 1.02. Can someone assist me in finding these drivers. I looked on the Support/Drivers page for this model but couldn't find anything.
This question was solved.
View Solution.

Hi,
You might get better assistance on the HP Enterprise Business Forum since you have a professional worktsation.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Driver missing - PCIe Data Acquisition and Signal .....

Hello, i recently used Boot Camp to install Windows XP on my 2010 15" Macbook Pro.
All the drivers are working (so far) and i haven't encountered many problems.
However, there is one thing bugging me:
When i go into Device Manager in Windows, and look down the list of installed/uninstalled devices, there is a device called "PCIe Data Acquisition and Signal Processing Controller" which has no driver installed.
I'm PC savvy, but i have never seen this before. My guess is that one of the motherboard drivers is missing, and Boot Camp installer doesn't include that driver?
Has anyone seen/resolved this, and if so, how?
Thanks.
Kaj.

Okay, will do.
Thanks.
Also i wonder if you could help with another problem?
http://discussions.apple.com/thread.jspa?threadID=2758766&tstart=0

PCI Data Acquisition and Signal Processing Controller driver

I've installed win 8.1x64 on my HP Probook 450 G2 but I am missing the PCI Data Acquisition and Signal Processing Controller driver.
Can you please help?
Thanks,
Leontina
This question was solved.
View Solution.

Hi:
Please see if installing the Intel Chipset driver installs that device.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng&ProdId=816

Pci data acquisition and signal processing controller -Device software not installed

My pc shows me ,the driver software for pci data acquisition and signal processing controller is not installed on my Device manager.
Please suggest me a suitable solution.

No its not working , Give me an alternate solution.

E5-571 PCI Data Acquisition and Signal Processing Controller & SM Bus Controller

I upgraded from Windows 8.1 to Windows 10. Windows Update says that it is up-to-date. Windows Devices Manager shows a problem with two devices: PCI Data Acquisition and Signal Processing ControllerSM Bus Controller What are these devices and where do I locate the drivers for them?

That should do it. I've been pleasantly surprised by how well older drivers are working in Windows 10. I had to install Vista 64bit drivers for an ATI video card (the latest working drivers for the card) and they actually worked!

Driver needed for PCI Data Acquisition and Signal Processing Controller of HP 15- r247tu

Install the Windows 10 Intel IMEI Intel Management Engine Interface (MEI) Driverhttp://ftp.hp.com/pub/softpaq/sp69501-70000/sp69593.exe The latest version of the Intel chipset driverhttp://ftp.hp.com/pub/softpaq/sp69501-70000/sp69575.exe All Windows 10 drivers available from HP are at the following link.http://support.hp.com/us-en/drivers/selfservice/HP-15-Notebook-PC-series/7486447/model/7693973#Z7_3054ICK0KGTE30AQO5O3KA30R1

Hi: Try the chipset driver directly from Intel...the second file is the auto install file. https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility- If that driver does not install the PCI Data Acquisition and Signal Processing Controller, which the chipset driver should install, download the first file listed above (zip file). Unzip and extract the contents to its folder. Go to the device manager and click on the above device needing the driver. Click on the driver tab. Click on Update driver. Select the Browse my computer for driver software option, and browse to the unzipped driver folder. Make sure the Include Subfolders box is checked, and see if the driver installs that way. Then reboot.

Lenovo 14 20DM correct driver for 'Data Acquisition and Signal Processing Controller'

Hi Everyone, I am the happy owner of a new Yoga 14 20DM. A few days ago I made the decision to upgrade to Windows 10. Whilst the upgrade went smoothly I did have to install a number of drivers manually. At the moment I am stuck on trying to install the 'PCI Data Acquisition and Signal Processing Controller' (as shown below). I have tried right clicking on the device then selecting Properties > Driver (tab) > Update Driver > Search automatically for updated driver software, however doing so only shows the screen capture below! Furthermore I have searched the Lenovo support page for a suitable driver however none is available! http://support.lenovo.com/au/en/products/laptops-and-netbooks/thinkpad-yoga-series-laptops/thinkpad-yoga-14/20dm?TabName Finally I have also installed, and run, 'System Update 5' the software program available from Lenovo. However it was not able to install a correct driver for this device. I have done a little searching on this topic, and have read a couple of stories about people installing an incorrect driver for this device, and then experiencing blue screens! Can anybody suggest how I can go about locating and installing the correct driver for this device? Any help will be greatly appreciated. Kind Regards, Davo

Hi Ingemann, Ultimately I decided on the newest version of the Intel Chipset Device Software (INF Update Utility), which at this time (on the Intel website) is version 10.0.27. https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility- Interestingly enough I was presented with the message below when I ran this executable. I selected Downgrade (with some trepidation), and after rebooting was pleasantly surprised to see that the troubled device was missing from the list. I can only assume that this means the correct drivers were installed. Thanks you very much for your help. Kind Regards, David

Lenovo ideapad yoga 13 pci data acqusition and signal processing center for problem for windows 8

Link to picture
hi everyone,
find original w8 cd and then i installed, when i was installing
i deleted all recovery and other partition, i did not think what can i do,
but then i activated windows and installed all driver, but i taking
after all drivers it stayed
2''unknown devices''
and when i rebooted, it says, usb device not recognized'' and also
''pci data acquisition and signal processing center'' devices problem for windows 8. and touchscreen not working.
i read related for w7 same problem, but what i will do now ?
thanks.
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

hi adilsefaersan,
Welcome to Lenovo Community Forums!
By opening your Device Manager right click on one unknown device and choose properties,
>On the properties windows Click on the Details Tab, on the property drop down Choose hadware IDs
> then copy the value and post back here whats on the Value pane
Do it for all those unknown Device and Post here the Value of the hardware ids
also can you share your Windows Version and bit type so we'll knwo the correct download page for you
Thanks and Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

how can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

If you have an RS-232 interface to the digital video recorder, it may be that you can send a command to the video recorder in order to get the time code sent back to your application - you would then read this as a string and then incorporate this data into your program.
The best source of help will be any documentation you have relating to the serial (RS-232) interface with the digital video recorder. This documentation should have commands that you can send to the recorder and expected response strings that you should get back from the device. This task should be straightforward but can often be frustrating without documentation about the video recorder. This will not be something that you can "guess" - past experience in writing serial communication ap
plications has shown that a good manual is your best friend.
Failing this if you have any source code for example programs that have already been written to communicate with the recorder, you might be able to extract the relevant ASCII strings and use them within your application. This is true whether you are using LabVIEW or a text-based language.
Jeremy

I want to change my primary email address, and use one already associated with my account why can I not do this ?, I want to change my primary email address, and use one already associated with my account why can I not do this ?

I want to change my primary email address, and use one already associated with my account why can I not do this ?, I want to change my primary email address, and use one already associated with my account why can I not do this ? I don't want to create another one if I really don't need to
Any ideas ?

I'm afraid that once an address has been associated with an Apple ID you can't re-use it in any way. You will have to create another address (such as a free on from GMail or Yahoo for example).

I want to make gImage Class extends Image and use Graphics2D

Sorry, my english short...
I want to make gImage Class extends Image and use Graphics2D
I trying to do...
make class gImage..
extends Image class. (Inheritance)
but Image class is abstract class..
And I want to use gImage class same as Image class.
I can't use constructor... because by Abstract calss...
How do i?
Help me.. plz...
And I want to use Graphics2D at Applet Game, But not use Java JDK Plug-in...
No Way?

You need to use BufferedImage with 2D or RenderedImage with JAI.
BufferedImage effectivley extends an Image so you can
draw it to screen in paintCOmponent.
I use an Extended JPanel to draw an image in a Panel with this.
MArk

How to find data dictionary and oracle schema tables for UTF8 char conversi

I am doing UTF8 char conversition, i got lot of convertable objects,as per document we don't need to worry about data dictionary objects and how to find data dictionary and oracle schema objects for UTF8 char conversition.
USER.TABLE Convertible Truncation Lossy
MDSYS.OPENLS_NODES 17 0 0
MDSYS.SDO_COORD_OP_PARAM_VALS 200 0 0
MDSYS.SDO_GEOR_XMLSCHEMA_TABLE 1 0 0
MDSYS.SDO_STYLES_TABLE 78 0 0
MDSYS.SDO_XML_SCHEMAS 3 0 0
ORDDATA.ORDDCM_CT_PRED_OPRD 51 0 0
ORDDATA.ORDDCM_DOCS 9 0 0
ORDDATA.ORDDCM_MAPPING_DOCS 1 0 0
SYS.METASTYLESHEET 178 0 0
SYS.REGISTRY$ERROR 2 0 0
SYS.RULE$ 21 0 0
SYS.SCHEDULER$_EVENT_LOG 182 0 0
SYS.WRH$_SQLTEXT 2,099 0 0
SYS.WRH$_SQL_PLAN 1,736 0 0
SYS.WRI$_ADV_ACTIONS 5,452 0 0
SYS.WRI$_ADV_DIRECTIVE_META 5 0 0
SYS.WRI$_ADV_OBJECTS 2,278 0 0
SYS.WRI$_ADV_RATIONALE 9,594 0 0
SYS.WRI$_ADV_SQLT_PLANS 455 0 0
SYS.WRI$_ADV_SQLT_PLAN_STATS 288 0 0
SYS.WRI$_DBU_FEATURE_METADATA 188 0 0
SYS.WRI$_DBU_FEATURE_USAGE 16 0 0
SYS.WRI$_DBU_HWM_METADATA 20 0 0
SYS.WRI$_REPT_FILES 27 0 0
XDB.XDB$DXPTAB 2 0 0
XML CSX Dictionary Tables:
USER.TABLE Convertible Truncation Lossy
Application Data:
USER.TABLE Convertible Truncation Lossy
APPLSYS.BISM_OBJECTS 4 0 0
APPLSYS.DR$FND_LOBS_CTX$I 0 103 1,260,883
APPLSYS.FND_CONC_PROG_ANNOTATIONS 272 0 0
APPLSYS.FND_OAM_CONTEXT_FILES 15 0 0
APPLSYS.FND_OAM_DOC_LINK 1 0 0
APPS.FND_OAM_CONTEXT_FILES_1 6 0 0
AZ.AZ_APIS 11 0 0
AZ.AZ_SELECTION_SET_ENTITIES_B 48 0 0
ECX.ECX_DTDS 205 0 0
ECX.ECX_FILES 91 0 0
IBC.IBC_ATTRIBUTE_BUNDLES 41 0 0
JTF.JTF_HEADER_DTD 1 0 0
JTF.JTF_MESSAGE_OBJECTS 82 0 0
JTF.JTY_TRANS_USG_PGM_SQL 29 0 0
ODM.ODM_PMML_DTD 1 0 0
OKC.OKC_REPORT_SQL_B 3 0 0
OKC.OKC_REPORT_SQL_TL 2 0 0
OKC.OKC_REPORT_XSL_TL 5 0 0
XDP.XDP_PROC_BODY 10 0 0
[Distribution of Convertible, Truncated and Lossy Data by Column]
Data Dictionary Tables:
USER.TABLE|COLUMN Convertible Truncation Lossy
MDSYS.OPENLS_NODES|SYS_NC00004$ 17 0 0
MDSYS.SDO_COORD_OP_PARAM_VALS|PARAM_VALUE_FILE 200 0 0
MDSYS.SDO_GEOR_XMLSCHEMA_TABLE|XMLSCHEMA 1 0 0
MDSYS.SDO_STYLES_TABLE|DEFINITION 78 0 0
MDSYS.SDO_XML_SCHEMAS|XMLSCHEMA 3 0 0
ORDDATA.ORDDCM_CT_PRED_OPRD|SYS_NC00004$ 51 0 0
ORDDATA.ORDDCM_DOCS|SYS_NC00005$ 9 0 0
ORDDATA.ORDDCM_MAPPING_DOCS|SYS_NC00007$ 1 0 0
SYS.METASTYLESHEET|STYLESHEET 178 0 0
SYS.REGISTRY$ERROR|MESSAGE 1 0 0
SYS.REGISTRY$ERROR|STATEMENT 1 0 0
SYS.RULE$|CONDITION 21 0 0
SYS.SCHEDULER$_EVENT_LOG|ADDITIONAL_INFO 182 0 0
SYS.WRH$_SQLTEXT|SQL_TEXT 2,099 0 0
SYS.WRH$_SQL_PLAN|OTHER_XML 1,736 0 0
SYS.WRI$_ADV_ACTIONS|ATTR5 2,726 0 0
SYS.WRI$_ADV_ACTIONS|ATTR6 2,726 0 0
SYS.WRI$_ADV_DIRECTIVE_META|DATA 5 0 0
SYS.WRI$_ADV_OBJECTS|ATTR4 2,278 0 0
SYS.WRI$_ADV_RATIONALE|ATTR5 9,594 0 0
SYS.WRI$_ADV_SQLT_PLANS|OTHER_XML 455 0 0
SYS.WRI$_ADV_SQLT_PLAN_STATS|OTHER 288 0 0
SYS.WRI$_DBU_FEATURE_METADATA|INST_CHK_LOGIC 21 0 0
SYS.WRI$_DBU_FEATURE_METADATA|USG_DET_LOGIC 167 0 0
SYS.WRI$_DBU_FEATURE_USAGE|FEATURE_INFO 16 0 0
SYS.WRI$_DBU_HWM_METADATA|LOGIC 20 0 0
SYS.WRI$_REPT_FILES|SYS_NC00005$ 27 0 0
XDB.XDB$DXPTAB|SYS_NC00006$ 2 0 0
XML CSX Dictionary Tables:
USER.TABLE|COLUMN Convertible Truncation Lossy
Application Data:
USER.TABLE|COLUMN Convertible Truncation Lossy
APPLSYS.BISM_OBJECTS|SYS_NC00023$ 4 0 0
APPLSYS.DR$FND_LOBS_CTX$I|TOKEN_TEXT 0 103 1,260,883
APPLSYS.FND_CONC_PROG_ANNOTATIONS|PROGRAM_ANNOTAT 272 0 0
APPLSYS.FND_OAM_CONTEXT_FILES|TEXT 15 0 0
APPLSYS.FND_OAM_DOC_LINK|DOC_LINK_INFO 1 0 0
APPS.FND_OAM_CONTEXT_FILES_1|TEXT 6 0 0
AZ.AZ_APIS|FILTERING_PARAMETERS 11 0 0
AZ.AZ_SELECTION_SET_ENTITIES_B|FILTERING_PARAMETE 48 0 0
ECX.ECX_DTDS|PAYLOAD 205 0 0
ECX.ECX_FILES|PAYLOAD 91 0 0
IBC.IBC_ATTRIBUTE_BUNDLES|ATTRIBUTE_BUNDLE_DATA 41 0 0
JTF.JTF_HEADER_DTD|HEADER_DTD 1 0 0
JTF.JTF_MESSAGE_OBJECTS|BUS_OBJ_DTD 41 0 0
JTF.JTF_MESSAGE_OBJECTS|BUS_OBJ_SQL 41 0 0
JTF.JTY_TRANS_USG_PGM_SQL|BATCH_DEA_SQL 1 0 0
JTF.JTY_TRANS_USG_PGM_SQL|BATCH_INCR_SQL 5 0 0
JTF.JTY_TRANS_USG_PGM_SQL|BATCH_TOTAL_SQL 6 0 0
JTF.JTY_TRANS_USG_PGM_SQL|INCR_REASSIGN_SQL 5 0 0
JTF.JTY_TRANS_USG_PGM_SQL|REAL_TIME_INSERT 6 0 0
JTF.JTY_TRANS_USG_PGM_SQL|REAL_TIME_SQL 6 0 0
ODM.ODM_PMML_DTD|DTD 1 0 0
OKC.OKC_REPORT_SQL_B|SQL_TEXT 3 0 0
OKC.OKC_REPORT_SQL_TL|HELP_TEXT 2 0 0
OKC.OKC_REPORT_XSL_TL|HELP_TEXT 2 0 0
OKC.OKC_REPORT_XSL_TL|XSL_TEXT 3 0 0
XDP.XDP_PROC_BODY|PROC_BODY 10 0 0
-------------------------------------------------- ---------------- ---------------- ----------------

Hi;
Please run below query which could be helpful for your issue:
select * from dictionary where TABLE_NAME LIKE '%NLS%'
select * from dictionary where TABLE_NAME LIKE '%GLOBAL%'
Regard
Helios

How to purge data cache table using command line

Hi:
Is there a way to purge the data cache table using command line?
thanks!

Thanks, Mike.
I'm thinking about the ldconsole provided with ALDSP.
The ldconsole has a link for purging the cache. Is there anything I can leverage from there? Is it a JMX component that I can call?

I want to acheive digitally triggered data acquisition and using AIO lines for triggering connecting to PFI lines but no response.

Similar Messages

Maybe you are looking for