I want to add indesign to my existing cs5 web premium

i bought cs5 web premium 3 years ago
i want to add indesign to it also
so how do i download cs5 indesign and have trial run and purchase it

Hi aasamhussain,
As suggested by Mylenium we do not sell CS5 anymore however you may download and run the trial for 30 days from here: http://www.adobe.com/downloads/other-downloads.html.
Regards,
Romit Sinha

Similar Messages

Want to add OBTYP field in existing filtergroup in BD64

Hi Guru's,
I want to add OBTYP field in existing filtergroup in BD64 can any one help me in this regard.

Hi......
Check these links :
http://help.sap.com/saphelp_nw70/helpdata/EN/ae/d4712d2cad43ffb56f82733a560c3d/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/01/3b15301edf48169f91ec2b5b0cbe2c/frameset.htm
It may help you.......
Regards,
Debjani.....

I want to add new mac to existing wired and wireless network

I have a imac 400mz connected (ethernet) to a network - CABLE Modem to Balkin 5.4 G Wire/Wireless router. I have 2 wintel machines hard wired, plus 1 via Motorola PCIMA wireless. I want to add either of the following new Apple products -
mini mac or imac 17 - both have Airport extereme installed. OK how do I get the new apple on to the existing network.
Please advise

On the Mac - click on the Airport menu icon located near the right side of the MacOS menu bar at the top of the screen. A list of all in-range wireless networks will appear. Click on the name of your wireless network to connnect to it. If your wireless network is protected by WEP or WPA security, the Mac will prompt you to enter the key. That's it!

How to add new class to existing DC (Web Dynpro project)

Hi,
How can I add new class to an existing DC (Web Dynpro project)?
I tried adding it using File - New - Other - Java - Class, but after a build of the DC the new class (and its contents ) was completely removed.
Then I created a new DC (java project) and created a new class in that DC. This went fine, but I got into problems because of circular referencing between the new & the old DC, so no build was possible.
This can't be difficult, does somebody knows how to do it?
My temporary solution is to add the classdefinition to an exisiting .java file. Very ugly.
Thanks,
Jeroen

Hi Jeroen,
where did you create the class? If the *.java file is placed in the src/packages folder it should not be deleted by a build. (I suspect you created it in the gen_wdp folder?)
Regards,
Marc

I have CS 6 Design Standard and I want to upgrade to CS 6 Design and Web premium

When I bought the design standard I was told i could upgrade to Design and web premium. I do not want cc right now. I don't want to pay every month. I am a student and do not have money to waste each month

S&T versions cannot be upgraded and specific to your situation there are as such no sidegrades, either. One would simply buy another full license with the educational discount. Feel free to contact sales support, maybe they can help you and sort this out.
Mylenium

Want to add Time Capsule to existing AEBS wireless network

I currently have a wireless network with Airport Extreme as the base. I have a Time Capsule that someone didn't want anymore and would like to use that ONLY for backup of my IMac (Using Time Machine). Is there a way to only use the hard drive part of Time Capsule without having it be used to create a wireless network?

Welcome to the discussions, fargodenny!
Is there a way to only use the hard drive part of Time Capsule without having it be used to create a wireless network?
Yes, you have a couple of options here.
1) Configure the TC to "join" the wireless network that the AirPort Extreme is providing. Backups will be over wireless only. The ethernet ports are not enabled in this type of setup, so you would not be able to use ethernet to backup.
2) Turn off the wireless on the TC and connect it to the AirPort Extreme using an ethernet cable. This would be the recommended way to set this up because you would have the option to backup using either ethernet or wireless.

I want to purchase InDesign

I currently have the Photoshop Photography Program and I want to add InDesign. How do I do this?

Sign up for a Single App subscription for InDesign for $20/month

I want to know detail of transferring existing website(live) into Cloud Host site facility.

Dear Creative Cloud Support,
Right now I am one of your customer, and already using Adobe web premium product since CS3, right now I am using your CS5 web premium.
And has intention to subscribe for Adobe Cloud.
I am interested to know more detail about your host site facility in Adoce Cloud Host Site (5).
In relation with its features and maximum capacity 20 GB as a member.
My questions:
1.Is this facility only for new domain name or can be used for existing website (live)?
2.Do we transfer a whole website content into this Host Site? Or only a link?
3.If it a facility similar principle like web hosting, what database engine, and language it support?
Maybe my questions are not relate at all with your Host Site terminology, if so please explain more detail about it or direct me to read your article of how step by step we can utilize this service.
Thank you so much for your attention, and I am looking forward to hear from you at my email: [email protected]
Sincerely,
Budhi Suwardi.

Hi Budhi,
1.Is this facility only for new domain name or can be used for existing website (live)?
If you already have a domain you can associate it with 1 of the 5 sites included with the BC web hosting services included with Creative Cloud
2.Do we transfer a whole website content into this Host Site? Or only a link?
You can create and publish an entire site, this is typically done with either Dreamweaver or Muse.
3.If it a facility similar principle like web hosting, what database engine, and language it support?
The service that does the hosting is Business Catalyst and the included service is webBasics. This FAQ has info about the service.
http://www.adobe.com/products/business-catalyst/faq.html
These videos might be useful too:
http://tv.adobe.com/watch/learn-creative-cloud/publishing-and-managing-a-website-with-crea tive-cloud/?go=13698
Dreamweaver
http://tv.adobe.com/watch/introducing-business-catalyst/getting-started-with-business-cata lyst-and-dreamweaver-cs6-what-is-business-catalyst
http://tv.adobe.com/watch/introducing-business-catalyst/getting-started-with-business-cata lyst-and-dreamweaver-cs6-creating-and-publishing-sites/
Muse
http://tv.adobe.com/watch/introducing-business-catalyst/getting-started-with-business-cata lyst-and-muse-what-is-business-catalyst
http://tv.adobe.com/watch/introducing-business-catalyst/getting-started-with-business-cata lyst-and-muse-creating-and-publishing-sites
We also have a forum specifically for Business Catalyst here:
http://forums.adobe.com/community/business_catalyst
They should be able to answer any additional questions you might have.

Creative Cloud conflicts with existing CS5 package

Hi. I've seen a few questions kind of like mine, but they haven't really answered what I need to know, so, I've just been sent a promotional mail regarding becoming a full Creative Cloud member which I am considering, but first I'd like to know, how will this affect the package I already have? I have my own copy of the CS5 Web Premium package. Will there be any licensing conflicts? And if I choose to drop the Creative Cloud membership at any time will this cause any problems with the programs I already have?
Thanks.

No and no. You are overthinking it. CC is just like any other major upgrade version in the past - it keeps to itself and doesn't do anything to your existing programs. Only the licensing is different this time. Beyond the usual is to be expected - fiel associations and shared components will refer to the latest version, so e.g. invoking Bridge from CS5 may call up Bridge CC, regardless.
Mylenium

ABAP Help: Want to add existing field in Output of report KOB1

I want to add an existing field in report KOB1. In SM34 in view V_TKALV there is structure KAEP_COAC which has a field PERNR. I want to add this field on the output of the report. Can somebody give the steps in SM34 only to display it on the report.
Thanks,

how did you do it?

HT1727 I downloaded songs onto a MacBook Air, then copied to a new iPod. I have existing songs on a Microsoft computer that i want to add to the iPod, but it won't allow? how do i do this?

I downloaded songs from itunes store onto a MacBook Air, then copied to a new iPod. I have existing songs on a Microsoft computer that i want to add to the iPod, but it won't allow (it required me to change formatting from Apple to Microsoft)? how do i do this?

Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

Just purchased a new pc. Downloaded Itunes. Downloaded some new music. Went to add the new music to my iphone off my new computer but it wants to wipe all of my existing music which has been purchased from itunes. HELP! What should i do?

Just purchased a new pc. Downloaded Itunes. Downloaded some new music. Went to add the new music to my iphone off my new computer but it wants to wipe all of my existing music which has been purchased from itunes. HELP! What should i do?

Kford_red wrote:
Feel a bit gutted as spent £££'s downloading music tonight and not been able to get the songs onto my phone so far!
The music you just downloaded tonight to your new computer is safe. The music you purchased on your phone is safe. You shouldn't feel gutted. It's your other music that you should have taken better care of. That would include any music you ripped yourself or purchased outside of iTunes. That you can't get back.
It has always been the user's responsibility to back up and protect downloaded music. If you didn't have a backup of your computer before it started acting funny, that's your fault. It would be no different than if you lost a music CD. It would not be a record store's responsibility to replace if you lost it. Digital music is no different. Similarly, a phone is not a backup medium. Phone's break, get misplaced or stolen all the time and are not a substitute for a backup copy of your music and media.
Computers WILL break. Hard drives WILL fail. That's why you back up your data.

How to add new infoobject to existing cube or dso?

Hi all,
Can we add new infoobject to exixting cube in BW 3.5 ver? if yes how can we add? Please provide me steps.
Thank you.
Sunil

Hi Sunil,
If you want to add new info object to the IC or DSO which is already holding data - then you need to make a copy of that particular DSO/IC and load the data into dummy.
Now delete the data from the IC/DSO to which you want to add the new info object. once the data is deleted it will allow you to add new info object to you IC/DSO.
save it and activate the IC/DSO
load the data from Dummy DSO and from new run on wards the newly updated info object will also get updated(historical data will not be updated if its newly added to DS as well).
If you want the historical data for the newly added field then you need to drop the compelte data and need to extract from source.
Note: You can't include the new info objects are change the existing info objects if there is data exist in the IC/DSO
Regards
KP
Edited by: prashanthk on Dec 31, 2010 10:54 AM

Want to add a infobject to a cube

Hi All
In production system From 1 ODS we are loading to 2 infocubes(IC1 and IC2) daily and now we want to add a infobject to a cube IC1.
So we now added this infobject in development,now while transporting what measures to taken care(I mean risk analysis)
Should what/which all objects needs to transported
only the infoobejct or infocube or infocource or infosource or ODS or anyhting????
Please let me know
Regards
Balji

Hi Balaji,
1) Muralidhar gave a good answer for all the related objects.
2) What are your plans for existing production data in those cubes where you are adding a
new infoobject ??
Do you need to populate the historical data for that object?
Good luck, BB

How do I add XML content to existing FrameMaker Document

Hello,
I have an XML document that contains features of one item and I want to add data from it to FM document that shows those features. These features have been added to FM previously by copy-paste technology which isn't obviosly the fastest way and I have understood adding them automatically is possible.
I can read XML well and I can produce XSLT files to make another XML files, problem is that I'm a little beginner with FM and help files didn't show any good examples of this (or at least I didn't find). I tried to do some read/write rules, because it seemed to be the way how FM handles these things but they didn't work.
So shortly: XML file (data) + FM file (tables and such) = FM file which have XML data in its tables
I would appreciate any help, like pointing to right help files or such, thanks in advance.

The two main references you need are:
Developing Structured Applications with FrameMaker, Guide
Developing Structured Applications with FrameMaker, Reference
They used to ship with FrameMaker, but you can download them from the Adobe site. Check the Support section. I do not believe they are available for FrameMaker 10 yet, but they are for version 9. No matter your FramMaker version, almost any set will do.
Basically, you need an XSLT that will translate the XML structure into the structure you use in your FrameMaker files. You need a set of read/write rules (see the references above). FrameMaker uses read/write rules to specify how certain FrameMaker objects are to be translated from the XML. Such objects include tables, variables, and markers.
Then you need to create a structured application that specifies where the XSLT, the read/write rules, and your structured template are located on you system.Again, see the references.
Once all of the above is in place, you open the XML file from within FrameMaker. FrameMaker will ask you what structured application to use, which you pick from the dropdown list. It will then open the XML file, apply the XSLT transformation, and copy the result into your structured blank template. That process will likely list several errors, which you may or may not be able to ignore depending upon the resulting FrameMaker document. In my case, these are usually errors about missing graphics, which I already know are missing.
The result is ONE FrameMaker file. You can then copy and paste the information where ever you need it in your other documents. I am not sure whether you can import an XML file into an existing Framemaker document, much like a text inset. Maybe others will know.
Good luck,
Van

I want to add indesign to my existing cs5 web premium

Similar Messages

Maybe you are looking for