I want to allow online video conferencing classes ...

I want to allow online video conferencing classes on my website. How can I achieve it with Skype manager? Will Skype provide me a link to their service or some code that I can embed into my site?

We are chatting (Text at present).
I am getting Error 8 in Video Chat invites.
Cable Modem set to allow Public IP to Computer with No VoIP device in line at Switch900's end.
Quicktime now at 1.5Mbps
Mac Firewall set to Allow All at present.
Update to 10.5.2 was through Software Update so have suggested a Combo Install
Work remains in Progress.
9:16 PM Friday; March 14, 2008

Similar Messages

Want block all online video stream and chat.

I want to block all video Stream and chat messengers in my laptop irrespective of browsers, my room met always watching porn, you-tube, cricket, movies and soccer videos. I tried blocking IE using content adviser by the help of my colleague, but he installed
chrome and watching. Please suggest me a way where i can block the online stream access in system level.

Hello,
To block sites, check the following links given below, I hope it helps you:
http://windows.microsoft.com/en-AU/windows-live/family-safety-child-kid-protect-filter-sites-chat-faq
OR
http://www.pcworld.com/article/249077/how_to_block_websites.html
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Video conferencing in training and event management.

Hello experts,
My client wants to configure the video conferencing facility in the training and event management module. Can somebody advice me on that part as in how to do so?
Thanks and Regards,
Kanika Talwar.

Hi
In Table V_T77TNM_DC
We need to have the below entries
TNM                                              CL_HRTNM_VALO_COMPUT_GUI_FR
TNM       HRTNM00_REPMOD        CL_HRTNM_VALO_COMPUT_GUI_FR
TNM       MP168400                       CL_HRBAS_INFTY_1684_GUI_FR
TNM       RPCTNM9S_REP            CL_HRTNM_INFTY_1036_GUI_FR
Regards
Kenu

Watching online videos

when i want to watch online videos, sometimes it says to download the plugin to windows media player but it still wont let me view the video online. what do i do?

I had the same problem. Even after installing flip4mac, I got that message. Yesterday, I noticed that one of the options offered, to the left of "upgrade your player" was "Play video anyway" or something like that. So I hit it and -- the video started! Since then, it's gone straight to the video without giving the message first. Hope that helps.

Does anyone know of a good online video instruction on how to put together a photo slideshow in the new iMovie version. I found uTube videos using imported videos, but I want to use photos in iPhoto.

Does anyone know of a good online video instruction on how to put together a photo slideshow in the new iMovie 11 version. I found uTube videos using imported videos, but I want to use photos in iPhoto. I'm very familiar with how to do this in the pervious version, but it's no so intuitive in the new version.

Has anyone tried this one.. I am not sure if I am allowed to post information about other products... so if I am not please delete this part of my message.
New Trent Arcadia Pack IMP70D 7000mAh?

I want to save streaming video to watch later

Hi
I want to save streaming video to watch later, wma format, whatever
format is most common on the internet. Quick Time does not
open automatically when the streaming video starts but Windows Media
Player opens. What program is low cost that will save the video
stream that Quick Time Player or Windows Media Player can open?
thanks in advance
Mark S

I want to save streaming video to watch later, wma format, whatever
format is most common on the internet. Quick Time does not
open automatically when the streaming video starts but Windows Media
Player opens. What program is low cost that will save the video
stream that Quick Time Player or Windows Media Player can open?As I see it, you basically have 3 main options:
1) Screen Capture -- Any streaming video that can be watched/listened to can be captured. Several applications are available that can do this but I generally prefer SnapzProX. This class of program essentially allows you to "record" the audio and video as it is being played back on your computer. This is normally done using a very simple but very fast codecs which create rather large files on your computer but which can then be transcoded to a more efficient format for playback whenever you wish.
ADVANTAGES: You end up with a fully self-contained copy of the media which can be locally archived, moved, copied, and is available as long as you keep the copy.
DISADVANTAGES: This approach can require large amounts of storage space depending on the commpression format used and the number of files stored. Depending on the material involved, this could constitute a copyright violation of media use.
2) Save As... -- If you have/purchase QT Pro and/or an appropriate third-party QT component (like Flip4Mac in this case), you open open/play the streaming file in the QT Pro Player and save a copy of the movie that contains a resource pointer to the online streaming server. For all intents, you have a "copy" of the file stored on your computer that can, within certain limits, be played back whenever you wish.
ADVANTAGES: Since the saved movies are very small, you can save a large number of them on your computer. Since they open and play just like standalone movies, they are very easy to use and share. Since control of the content remains with the orginator and access (public or limited) remains as intended by the originator, you would not be violating copyrights here.
DISADVANTAGES: Material may be changed, removed, or unavailable for one reason or another at any given time. Playback requires connection to the Internet.
3) Bookmark/URL List -- As a last resort, you can always bookmark or copy the relavent streaming server URL to a "hyperlink" list and open the media manually whenever you wish/are able to do so.
ADVANTAGES: Nothing to buy.
DISADVANTAGES: Requires extra effort on your part, still won't open in the QT Player, and still remains subject to the online vagaries mentioned above.

Video Conferencing in Air 3 for Android/IOS

Hi,
We are in the process of creating a Video Conferencing application for Android and IOS devices, the app would be published on Android and IOS market. I have some quires related to using Air 3.0 for the development:
For Android devices Front facing camera is supported only in Air 3.0, but can we assume Air 3.0 would be officially available by end of this year?
Would this feature available for all Android 2.2 and above devices?
Can we use Flash Media Server/any other streaming server for video conferencing?
I have read in some of the post that Apple store do not allow video streaming with RTMP, is this true? Is there any work-around to use streaming video from within Air app for IOS?
Thanks in advance!
Sangram

I used milkmangames ANE. (50$), because i didnt want to fork the code for each os.
http://www.milkmangames.com/blog/tools/
It was "easy" to set up (quotes: as easy as something complicate can be).
Consumables, or One-time-purchases worked out of the box, but restore, subscriptions and auto subscriptions (like newspapers) had bugs like hell and were unusable.
Also check out here for some free stuff (wich propably works as well as the comercial, "supported" stuff, stupid-me)...
https://github.com/freshplanet/ANE-In-App-Purchase
More ANEs:
http://sleepydesign.blogspot.de/2012/07/ane-free-air-native-extensions.html

Mac to PC Video conferencing: OhphoneX to NetMeeting

Most of the Mac to PC Video conferencing posts talk about iChat AV via .Mac/ AIM screen name to AOL Messenger.
For those wishing a larger video size one could replace AOL Messenger with Trillian (http://www.trillian.cc).
We, on the Mac side, are blessed with the ease of use of iChat AV.
The set-up, on the them side, the PC side, is a bit of a hassle for your poor family and friends who barely know how to shutdown their PC with the Start button.
Why not let the Micros~1 Windows 2000 / XP users enable their packaged NetMeeting software.
I recall from my dark ages that NetMeeting was serving its purpose with adequate proficiency (Isn"t that a "contradixio in terminis").
OhponeX claims to be compatible with Micros~1 NetMeeting.
http://xmeeting.sourceforge.net/
The installation of Ohphone on the Mac is .... simple.
The activation of Micros~1 Netmeeting .... requires the filling of a few set-up screens.
Now find each others IP address:
In OhphoneX this is displayed on the main screen
In Micros~1 NetMeeting, go to Help, Click About and there the IP(s) are listed.
Enter the IP in the callto screen and press enter.
On the Mac side you can click Connection Statistics to see the in/out streams for both audio and video.
The mentioned OhphoneX website has a good manual.
The lovers of OpenSource will dig the code.
One next step to be solved: connection across LANs.
Within the same LAN I"ve got this Mac to PC connection working.
Cross LAN I got stuck with NATs and router ports.
Any help out there?
Regards,
Coen Jeukens

OK, Bill, <big><big><big>☺</big></big></big>
Coen and I have chatted about this.
I believe that he posted this thread to assure those who wonder whether OhPhoneX can connect to NetMeeting conferences know that
b it can. Coen, please correct me if I am wrong about this.
I have never used either OhPhoneX or NetMeeting, but Coen tells me that this info will be of value to iSight users wanting to do so.
As related to Coen's
]"One next step to be solved: connection across LANs.",
Bill, if YOU can't answer this one, I do not stand a chance!! <big><big><big>☺</big></big></big>
If Coen does not get needed answer from someone here, I suggest he might find better help from http://xmeeting.sourceforge.net/ or in the Tiger > Getting Online & Networking Discussions area.
That is the best I have to offer.
EZ Jim

VPN & Video Conferencing Ip List in Router

hi, I want to find out the ip list(source & Destination ip) and bandwith usages for which vpn/video conferencing are allowed in my cisco router. pls help me how can I do it.

You can configure static 1:1 NAT for the ASA outside interface with a spare public ip address on the router.
If you don't have spare public ip, then you need to configure static PAT for UDP/500 and UDP/4500 on the router, and enable NAT-T on the ASA.

Video conferencing and SIP URI setup

I am new to Cisco's video products and am trying to configure them for some simple video conferencing. I currently have the following in our environment:
CUCM v7.1.5
VCS X7.2.1
TMS v14.1.0
MCU 5320 v4.3(2.17)
EX90 vTC5.1.2
I am also new to SIP URI dialing. I have done some base configuration on my VCS, TMS, and MCU, following the installation and configuration guide. What I am struggling with is what I need in order to set up the SIP URI info for the EX90. Does there need to be an AD account configured that has a sip directory value? Or can I just use whatever SIP address I want as long as the domain matches what I put in the VCS for the domain and allow list?
I followed the following guides:
TMS
http://www.cisco.com/en/US/docs/telepresence/infrastructure/tms/install_guide/Cisco_TMS_install_guide_14-1.pdf
VCS
http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/install_guide/Cisco_VCS_Getting_Started_X7-2.pdf
http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Basic_Configuration_Single_VCS_Control_Deployment_Guide_X7-2.pdf
MCU
http://www.cisco.com/en/US/docs/telepresence/infrastructure/mcu/install_guide/Cisco_TelePresence_MCU_5300_Series_Getting_started.pdf
VCS & CUCM Call routing
http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Cisco_Unified_Communications_Manager_Deployment_Guide_CUCM_6-1_7_8_and_X7-0.pdf
Any assistance and understanding that can be shared would be greatly appreciated!
Thanks in advance,
Mr. A little confused - Arras V. Martin

Hi Arras. Good morning. I'm going to hopefully answer some of your questions you have here. You also may find that the Telepresense Community on the Support Forums is a great place to post this as well.
First, I would recomment to you to update from TMS 14.1 to TMS 14.1.1. There was a major scheduling bug in this release, and had to be removed and updated with TMS 14.1.1. I would start by updating TMS to that version.
CUCM 7.1.5 is a bit older release. There are some nuasances with this version that have been fixed in 8.6.2 CUCM. Also, if running 8.5 CUCM or higher, you can add this to TMS and manage TP endpoints on CUCM via this version. So if you have CTS endpoints or EX, MX and C-series registered to CUCM, you can manage and schedule those units in TMS.
Q -Does there need to be an AD account configured that has a sip directory value?
A - If you add the device in TMS and have it registered to VCS as SIP, you can configure the SIP URI field to whatever SIP URI you wish to assign to the system. As long as the domain you specify is part of VCS domain and your allow list pattern or rule is ok, the system should register just fine.
If you running SIP only environment, you can always restrict bookings in TMS to allow SIP only if this is what your gearing towards.
Hope this helps you out a bit. Feel free to post any more questions here you may have and will do my best to get those answered for ya.
VR
Patrick

Video Conferencing System Graduation Project

Hello all,
My graduation project is a Java based video conferencing system I know that it is going to be implemented by JMF and I am studying it now So I just wanted to know the modules of the project to distribute it on the working team.

Oops! forgot to add..
I just wanted to know the modules of the project to
distribute it on the working team. But if you are determined to go ahead with this folly
(developing a final year project in an unsupported API).
It is possible to devlop for the JMF once the power
pack or core JMF (Mac.) is installed. The installation
process generally makes all the JMF classes available
through the 'extensions'(?) directory and they should be
on the java 'classpath'.

Does Video Conferencing use multicast?

We want to enable vide conferencing between multiple remote sites, however, our providers backbone does not support multicast traffic.
The question I have is if I have 2 users in Boston, 2 in NYC and 2 in SF for video conferencing, is the traffic output from a MCU a multicast or unicast to the remote sites?
This is with the MCU at the NYC location.

H.323 uses unicast traffic. Some vtc endpoints are also capavle of generation a mutlicats video stream, but that is not a part of the H.323 feature set. Multicast is not supported on the public internet, and very few if any providers are going to allow it on their backbone.

CUCM registered SX10s and adhoc video conferencing

Hi All,
We have a customer with CUCM 10.5 looking to do some very basic video conferencing (multi party but only need loudest talker switching). Simplicity is key here, they are used to adhoc conferencing including MeetMe in CUCM using traditional IP phones. They are looking at installing SX10s in a few meeting rooms, registered to CUCM 10.5. The questions I have are:
i) Is it possible to use a G2 ISR (2911 etc.) with a homogeneous conference bridge configured for h264 / HD 720p and have the SX10s be part of a conference? The data sheet indicates the SX10s support 720p30 (http://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/telepresence-quick-set-series/datasheet-c78-731274.html). I understand there would be some serious limitations here like no transcoding (all parties in the conference have to support the 720p stream), this shouldn't be an issue as all devices will be SX10s.
ii) Is it possible to initiate a MeetMe conference from an SX10, either from the remote or a touch 10?
ii) Is it possible to dial into a MeetMe conference from an SX10, either from the remote or a touch 10?
iii) Is it possible to escalate a point to point call to an adhoc conference from an SX10, either from the remote or a touch 10?
The Cisco TelePresence Endpoints and Cisco Unified Communications Manager document (http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc7/administration-guide/administering-endpoints-running-tc72-on-ucm1051.pdf) has a few lines on adhoc conferencing (page 54) which says "To enable ad hoc conferencing the CUCM must be set up with a Conference Bridge (media resources), and the conference bridge must be added as a Cisco Telepresence MCU in CUCM." Which makes me doubt the PVDM3 video conference bridge would be supported.
Are there any other solutions to a simple video conference requirement, or would it have to be a MCU registered to CUCM?
Thanks,
Jonathan

With the SX10's registered to CUCM there is several options here. One is that if they own a good amount of CUWL then there is the ability to get free TelePresence Server licenses. I believe it is for every 30 CUWL pro they get 1 screen license and the ability to install conductor. In order to install this you need to make sure that you have VMware resources to handle those two installs. Then you can have your ad hoc meeting configured in that.
If they want a physical appliance than a MCU 53xx can be used as well. License it based on how many people you want in one bridge.
In either case you will need to configure the Media Resource Group option in UCM to point to those SIP trunks to allow for the 3 way video call to happen and it will be automatic to the end user. They will see a call coming in and then the option to accept and merge.
I remember reading about using a GSR but it has to have the DSP 3 module in it for the video encoding.

I have a macbook pro running snow leopard. Just recently I cannot view youtube videos and other online videos. I recently updated my flashplayer plugin and I believe that is the problem. Is the latest flashplayer plugin compatible with 10.6.8?

I have a macbook pro running snow leopard. Just recently I cannot view youtube videos and other online videos. I recently updated my flashplayer plugin and I believe that is the problem. Is the latest flashplayer plugin compatible with 10.6.8? If this is so, I need to find an older flash player plugin to reinstall. I do not want to upgrade from 10.6.8 at this time because I have 18 yrs. worth of financial records on Quicken that I have read will not work with Lion and I've read bad things about running music programs on Maverick.

rayvonr wrote:
...I have 18 yrs. worth of financial records on Quicken that I have read will not work with Lion and I've read bad things about running music programs on Maverick.
1) Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) is a full featured app that can be downloaded from Intuit for $15 and will work with your data file if you are using Quicken 2005, 2006 or 2007 (if you version is earlier, let me know for more instructions on easy conversion):
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
2) Partition your hard drive, or add an external hard drive and install Mavericks there and "dual-boot" to operate your music programs in Snow Leopard and experiment with them in Mavericks.
DO NOT install Mavericks over Snow Leopard!

I want to allow online video conferencing classes ...

Similar Messages

Maybe you are looking for