I want to be able to draw on the monitor with a stylus

I have a 24" iMac now but often I want to be able to add a drawing or a plan in an email using a stylus on the monitor. I know that this writing on the monitor with an iPad2 is possible but is it also possible on a MacBook PRO?
I do not want something that plugs into the Mac to work. I want a little simple application that will run and can accept drawings done by a stylus.
Then I want to be able to attach that file into an Apple Mail email.
Is it possible on the MacBook PRO? Or should I get an iPad 2 to be able to do it?
-L

Lorna from Hawaii wrote:
I do not want something that plugs into the Mac to work. I want a little simple application that will run and can accept drawings done by a stylus.
Sorry, Mac's don't have the touchscreen technology installed to do that like the iPad does.
The closest you can do is Walcom tablet on the low end
http://www.wacom.com/en/Products.aspx
and one of these bad babies on the high end (out of stock)
http://www.wacom.com/en/Products/Cintiq/Cintiq24HD.aspx
A Mac can't do this yet and would add a fortune to a already expensive machine to cater to artists, thus it's a external add-on device.
Then I want to be able to attach that file into an Apple Mail email.
Any file can be attached to a email provided it's not larger than the email service will accept, then there's DropBox for large files.
Or should I get an iPad 2 to be able to do it?
A iPad 2 will do that and allow you to draw on the screen, but it's smaller screen and there isn't the fine control like a add-on tablet provides. So your constantly zooming in and out to get the detail you need.
It can work, it's just more work to get the same results.
I don't know how email attachments are handled on a iPad, you need to ask that in the iPad forums.

Similar Messages

  • Has anyone tried drawing on the iPad with a stylus?

    I have tried the Jukestyle iPad stylus to draw signatures on the iPad. Has anyone else tried an iPad stylus to use for signatures on documents and contracts? Which ones do you prefer?

    OK I do not have a Lexus, but I have a 2004 Prius with Nav and Bluetooth and as I understand it the Bluetooth is the same. It took me like 45 seconds to do it. I did not touch a manual. Go to the phone and then the set up. In my car it gives you the default password. Go to the settings-> Network -> Bluetooth on the iPhone type in the password and you are in. Uploading you phone book is another issue but can be done from you Mac or PC with Bluetooth or with a older Bluetooth phone.

  • I want to be able to totally block the FaceTime functionality in my home network.  I would like to do this at the router level.  Does anyone know the hostname or IP address that the FaceTime application uses? Or which port it connects to?

    I want to be able to totally block the FaceTime functionality in my home network so my 4 kids aren't using the Facetime feature- It was easy for Skype just had to enter the work Skype on my Router Security list- and it denies access. I would like to do this at the router level for FaceTime? Only site I find in init.ess.apple.com - is this the startup site for Facetime?   Does anyone know a site I can block, hostname or IP address that the FaceTime application uses? Or which port it connects to?

    I would presume so, but it might be worth your while to experiment and play around with different combinations to see if you can block FaceTime while keeping Game Center open.  Good luck!

  • I have an Ipad2, an Iphone 4 . I want to be able to sync both of these with my Windows desktop and Outlook 2007. I would like to sync to and from the Idevices and Outlook.

    I have an Ipad2, an Iphone 4 . I want to be able to sync both of these with my Windows desktop and Outlook 2007. I would like to sync to and from the Idevices and Outlook. When I attempt to sync in itunes I get a popup message asking if I want to delete, Merge or cancel. Not wanting to delete of cancel the only option left is Merge.
                When selecting Merge all of the entries in outlook are added to the idevice. The next time I merge all of the same entries plus any new ones are added, resulting in older entries being repeated i.e an entry like “John’s Birthday” will appear 5 or 6 times on the same date.
                How do I resolve this issue? How do I get the the sync process to add only new entries?

    This is a great question. First, facetime will not work because it has to establish a Call connection first. iMessage should work, but how to get it going I am not sure. Two great Apps to try are, Viber and Skype. Viber is excellent, it works over WiFi, you can make free calls and free text messages all over the world with other users who have Viber installed. It does not even have to be open on screen to work. Viber does have to recieve one text message with activation code, to activate it, this will be your only hurdle, but maybe Verizon can help you get that one text message. Skype does have to be open on screen however, but this can function like Facetime with WiFi connection. Definitely get Viber free in App Store, and put it on all your iDevices so the old Verizon iPhone can function as a telephone when on WiFi.

  • How do I set up my time capsule to operate as a wireless hub when it is not plugged into the internet?  I want to be able to share wirelessly the information on the time capsule. thanks!

    How do I set up my time capsule to operate as a wireless hub when it is not plugged into the internet?  I want to be able to share wirelessly the information on the time capsule. thanks!

    I would prefer to answer in your post. as I have tried on two occasions to help.. so far this is the first time I can see you stated  you are using Lion.
    1. Did you download and install the 5.6 utility..?
    I said to do it.. you never said yes.. I did that.
    Please do it. .. you will get no place before you do.
    2. Did you bridge the TC.. ?
    If so it will work perfectly.. please post a screen shot of the summary page from the 5.6 utility. If something is wrong I can work it out from there.
    3. Or ring apple support and get them to walk you through the setup.. there should be phone support for the first week or two.

  • How can I change to location of pictures folder? I want to use a backup hardrive to store my photos and music on but still want to be able to go to the finder and click the photos/music button. How can I do this.

    I want to use a backup hardrive to store my photos and music on but still want to be able to go to the finder and click the photos/music button. In windows i would just change the properties of the given library folder. How can I do this in Lion?

    Move "~/Pictures", or if just iPhoto pictures, "~/Pictures/iPhoto Library", to the new location.
    If you moved iPhoto, open iPhoto with the option key held, like Tony T1 writes. Select "Other Library" and navigate to the new location.
    To add the new location to the sidebar in Finder, just drag it onto the sidebar.
    Same process for iTunes, or whole music folder.

  • When will the ability to transfer seamlessly between apple Tvs be available?  I want to be able to move from one room with an Apple TV to the other, and easily transfer a movie or tv show.

    When will the ability to transfer seamlessly between apple Tvs be available?  I want to be able to move from one room with an Apple TV to the other, and easily transfer a movie or tv show.

    No one here can answer the question (if or when that might happen). We are users here and do not speak for Apple. In fact, it violates the TOU to speculate about future Apple plans.
    Barry

  • I want to be able to select only the pages I want to print ei. 2-5 vs 1-8 but I can';t figure out how to edit the final #

    I want to economize on ink so I want to be able to select, for printing,only those pages that are important to me.. For example instead of printing pages 1 thru 8 , I may want to eliminate pictures and/or comments at the end of an article. I can adjust the beginning # but not the final one. Any help would be appreciated.

    Bonjour has nothing to do with this.
    Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup to get rid of that garbage which removed all built-in secuirty included with iOS on your iPhone.
    If your iPhone is not recognized by iTunes, check this link.
    http://support.apple.com/kb/TS1538
    http://support.apple.com/kb/TS1591?viewlocale=en_US

  • I work in an area where we use T one lines for internet.  I do have an iphone and am able to get on the internet on it.  Will I be able to get on the internet with an IPAD 3 that I have recently purchased.

    I work in a company that has only t one connection for internet.  There is no interet srvice provided in this area.  I do however have and Iphone three and have no trouble getting on the internet with it. Will it be the same for the IPAD 3 that I just purchased??  Want to be able to use the IPAD 3 at work and get on the interent and if I can on the Iphone 3 I'm hoping the IPAD 3 will also.  Any thoughts?

    Either your phone is getting on wifi or you're using the cellular network to access the internet. If it's wifi, then you just need to connect the iPad to the same wifi. If you're using the phone's cellular connection to access the net, then you'll either need to get a tethering plan to use your phone as a mobile hotspot for your iPad, or get a device like the Mifi, which is a portable cellular wifi hotspot

  • I'm not able to access to the internet with my ipod ..help! Non riesco a connettermi su internet via wi-fi !

    Salve, ho appena comprato il mio ipod di 8G..  connettendomi wi-fi al router di casa mia, aprendo safari (o le altre applicazioni che richiedono la connessione internet) spunta la finestra con scritto "Impossibile aprire pagine, Safari non può aprire la pagina perché non è connesso a Internet" Ho provato e riprovato, ma niente! Spero possiate aiutarmi, grazie! :)
    Hello, I've just bought my ipod (8Gb)... even with the wi-fi I'm not able to access to the internet, opening any app that needs internet my ipod shows this " Cannot open page, Safari cannot open the page because it is not connected to the internet"  I tried and I tried but it was useless..! I hope You can help me! Thank you and sorry if my english isn't right

    I can connect to the site using another computer on my network. It's completely isolated to my iMac.

  • I want to be able to draw a scalloped box using the line tool and the arc tool, (for the corners), t

    So I'm trying to make a logo that starts of with a scalloped square background.  I drew this creating 4 lines with inverted arcs at the corners then grouped all pieces into one - a new shape.  So now I need to color it in and this (should be a piece of cake step) is giving me a run for my money.  Why can't a fill it in?  I ended up freehand tracing it (badly) with the pencil tool and filling that in but that creates prob.s that you can imagine.  Please help- someone!?!?!

    Is this any use?
    Do the whole thing with filled circles. Then Pathfinder (panel) Unite.

  • Java 3D: Hi, dear all: I want to be able to click on the spheres i created

    Hi, I am new to java and I am trying to learn it by myself this summer
    1) I want to create a bunch of spheres and be able to click on it ( a message will appear) and when I put my mouse on it, a label (like node 1) will appear.
    2) I want to connect these spheres with edges and put one sphere in the center and be able to rotate them.
    2) is optional but please help me on 1) . Thanks in advance for your help.
    Casey.

    Caesy wrote:
    I can create spheres and rotate and translate it but i am having trouble to be able to click on it.This forum is more intended for a specific question. What you are asking is some sort of walk through on the Java 3D API and user interaction. Books are written on that subject.
    So, I suggest you to Google for a more advanced 3D tutorial*, or buy a book and study that. If you have a specific question about some code you have written, feel free to post it in the 3D section of this forum:
    [http://forum.java.sun.com/forum.jspa?forumID=21]
    Good luck.
    * A quick search resulted in this page:
    [http://www.vrupl.evl.uic.edu/LabAccidents/java3d/] (see Lesson 6: Basic User Interaction)

  • Before I updated to ios5 there was a "number" on the task bar next to bookmarks showing all the windows I like to keep open. Now I can't find the setting to go back to that feature. Help!! I just want to be able to click on the number to get to my windows

    Before I updated to ios5  there was a number lit up on the task bar (next to bookmarks) which were all the windows I like to keep open. Now, after updating I can't find that feature in settings. I don't like all the different tabs along the top. Can anyone help me please?? I just want to click on the number and have all of my open windows there!

    I don't think that is an option. iOS 5 new features is tabbed browsing, it replaced the old window interface.

  • I want to be able to view,at the pixel level, photos on my ipad1

    What apps do you recommend?

    You can check the app store, but i can tell you that out of the half dozen or so image editing app i have, including PS Touch, none will do that.
    My guess is that to edit at that level you will need to use something on a full blown computer.

  • I want to be able to access my shared library with a C script.

    this is an extention of my previous question.

    Mikey,
    As Labviewguru said, calling a LabVIEW DLL is no different than calling any other DLL from C. You will need your LabVIEW DLL, the .lib and .h files for your C code and the LabVIEW Run-Time Engine for the version of LabVIEW that the DLL was built with. Other than that, everything else is the same.
    Randy Hoskin
    Applications Engineer
    National Instruments
    http://www.ni.com/ask

Maybe you are looking for

  • When has a cuePoint in Video Loaded?

    I've been working through a tutorial on the Adobe Macromedia site which has an Flv video (Progressively Downloading), and buttons at the side which jump to certain Cue Points within the video. Tutorial Link... What I want to do is to only enable the

  • New OM Objects since Enhancement Package 4 (Job Family and Functional Area)

    I was wondering if anyone had implemented the new OM objects Job Family and Functional Area that came out with ehp4.  If so, what was your experience?  I am curious whether the new objects are are saved in IT0001 as the other OM objects (job, positio

  • List of customized objects

    Hi, I want to List all the customized objects in the system. Can any body tell me the way how to List the same. Regards, Sekhar.

  • Updated and now the ipod communication software won't install or uninstall

    After updating to the newest itunes (biggest mistake ever) the ipod communication files cannot be installed or uninstalled. I keep getting the same error message despite countless attempts to fix the install, uninstall and reinstall, install manually

  • How to create a winsow service for managed server 11g

    Hi We have just installed Fusion Middleare 11g weblogic 10.3.6 , our Admin server and managed server are on this very same server. we are trying to create a window service for start and stop both admin and managed server, we have created a window ser