I want to be able to print using windows remote desktop services what printers can i use?

Hi I want to use Windows Remote Desktop Services on my iMAC.
I understand some printers work but some dont when printing from the VDI client.
Can anyone give me a list of printers that will work with the VDI client or some work arounds so that I can print using my iMAC and that print jobs can be parsed through the VDI clien to my iMAC and then printed through the iMACs connection to the printer
Thankyou

ARD won't be as smooth as you think over the Internet and be a security risk for your daughter.
Your best bet would be to install nannyware, then when she's asleep you can review the logs.
This is the best and Mac friendly
http://www.internetsafety.com/

Similar Messages

Unable to connect to my home PC from my home Mac using Windows Remote Desktop

i have downloaded from the Microsoft website and also the Application from the App store and both fail to connect. i have connected to my PC using the migration assistant so they are able to recognise each other.
on the Mac:
- downloaded the app and also done the download from MS website - both fail and suggest to check that remote access is enabled.
on the PC:
- have my Ipaddress from "IPConfig"
- have enabled remote access through windows firewall
The PC is on and has a password enabled
Error on App:
"Unable to connect to remote PC. Please verify remote desktop is enabled, the remote pc is turned on and available on the network and try again"
both are connected to the internet and on the same home network. Can anyone please advise to any additional steps as this seems as though this should be really straightforward. as another note i don't have another firewall software interrupting - am just
using windows firewall until i can get this working.

Hi,
Firstly, please refer to the article below to enable remote desktop connection on your Windows 7.
Remote Desktop Connection: frequently asked questions
http://windows.microsoft.com/en-us/windows/remote-desktop-connection-faq#1TC=windows-7
On your Mac, you can download the app here.
https://itunes.apple.com/hk/app/microsoft-remote-desktop/id715768417?mt=12
More information:
Getting Started with Remote Desktop Client on Mac
http://technet.microsoft.com/library/dn473012
Hope this helps.
Jeremy Wu
TechNet Community Support

I have a Mac OS X 10.4.11 and a HP Office Jet 4500 Desktop. What driver can I use?

I have a Mini Mac desktop computer, MAC OS X 10.4.11 and a HP Office Jet 4500 Desktop printer. What driver can I use to install this printer?

Hey @Greenise,
Welcome to the HP Support Forums!
I would like to assist you today in getting the proper Full Feature Software and Driver package to install your HP Officejet 4500 Desktop All-in-One printer on your Mac OS X 10.4.11 Operating System.
Below is the link for the Full Feature Software and Driver Installer. Simply click on the link and select the 'Download' button in the top left hand corner. Once the download is complete just run through the on screen instructions to install your printer.
HP Officejet Full Feature Software and Driver (Universal) - Mac OS X 10.4,10.5 and 10.6.
Please let me know if this installer works for you and if you have any other questions. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

What printers can I use for apple ipad

I have a bother dcpl2540dw printer and I am unable to print from my ipad. It has wifi program built into it. Do I need a special printer?
Where can I find a list of compatable printers?
Thank you

I found the
Brother DCP-L2540DW
in the list of supported printers.
Do you have a router? Can you get on the internet from from your ipad via wifi.
Suggest you power off all your devices including router for three minutes. See if that helps. Check for installation of printer.
The iPad uses a print technology called AirPrint. Airprint is a particular communication protocol that flows over WiFi. So, having a WiiFi printer isn't sufficient. The printer needs to be of an Airprint variety of WiFi.
List of supported AirPrinters.
http://support.apple.com/kb/HT4356

Using unattend install files to automate the creation of Win7 pooled VDIs in 2012 remote desktop services

Hi All,
I have a problem that I have been working on for the past week and hoping someone can provide the missing link for me.
Background
We currently have a 2008 "VDI" environment with both personal and pooled Windows 7 desktops deployed to thin clients. We have just set up our first 2012 Hyper-V server and plan to deploy pooled and personal VDIs under 2012. I have been working
on the process and successfully created both pooled and personal Windows 7 desktops using the Remote Desktop Services and creating the collections.
I created the golden image and sysprep'd it (/Generalize /OOBE /Shutdown). During the creation of the Pool collection I manually inputted the Virtual settings (i.e. the OU, etc). I notice there is an option to supply an unattend.xml file with the answers.
We are deploying the pool into a computer lab in the school for the students to use. I want the pool to revert to the pristine state after the student logs off.
Problem
When the user logs into the pooled desktop I notice that the activation for the Windows license has not been run. I am trying to use the unattend file to activate the license before the first log-in. Using the Windows System Image Maker I've install our
volume license key, but it does not activate. The only option I have to activate it is to run a synchronous command during first login. This can only be inserted in the OOBE phase. When the user logs in the license activates, but when they log out,
the machine reverts to the pristine state.
I confess I'm newbie to unattend installs but I've been reading the docs on line trying to figure out how to change this behavior. I'm also assuming this won't be a problem with the personal desktops pools.
Any help is greatly appreciated.

Hi,
Please make sure to following guide like this link to deploy the virtual desktops
Windows 8 / Windows Server 2012: Pooled Virtual Desktop Infrastructure
http://blogs.technet.com/b/askperf/archive/2012/10/31/windows-8-windows-server-2012-pooled-virtual-desktop-infrastructure.aspx
Regarding to activation, see introduction in this link:
http://technet.microsoft.com/en-us/library/dn645522.aspx
Which did you use? for KMS as an example, you have to activate the master\template VM with the Windows version specific KMS Key and make sure that your KMS Server is auto discoverable.
The snapshot on the automatically created pooled collection VM is taken before KMS activation is initiated from the guest OS. So the KMS activation would take place only after user logs on. once the rollback is enabled, the pooled VM will
rollback to clean state and may perform the windows activation again when any user logs on to the VM again.
And you mentioned that you're using WSIM and installed Volume License Key, (I suppose you mean that you've typed the key in the "Product Key Selection" in WSIM), but as I know, we should leave the product key blank if you are using KMS host
for activation.
Yolanda Zhu
TechNet Community Support

What else can be used

Hi all,
am having problem to iterate to next record when using when validate record trigger.
what else can be used instead of next_record to iterate through?
thanks.

following is the problem where i have to calculate backlog by comparing it with the value presented in the database and that of the changed by user.
for exmaple in ven_share table share_quota defined was 100% and user changes it to 40 backlog should contain 60
upto this my logic is working fine but when i iterate to next record i want backlog to show previous + newly changed value..
can you suggest now how can it work in any other way??
declare
     v_share number(3);
     bck number(4);
--     total_bck number(3);
cursor c1 is select share_quota from ven_share where vendor_code=:ven_share.vendor_code;
begin
          first_record;
--open c1;
--fetch c1 into v_share;
for i in c1
loop
     v_share:=i.share_quota;
     if v_share<>:ven_share.share_quota--,:system.cursor_record
          then
          if v_share>:ven_share.share_quota
               then
               :ven_share.backlog:=v_share-:ven_share.share_quota;
               bck:=:ven_share.backlog;
               --next_record;
--     total_bck:=bck+v_share-:ven_share.share_quota;
          end if;
     end if;
--          if :ven_share.vendor_code is null
--               then
--                    null;
                    --bck:=:ven_share.backlog;
          --     else
          --     if v_share>:ven_share.share_quota then
                                   --     message(v_share);
     --     message(:ven_share.share_quota);
          --          :ven_share.backlog:=bck+v_share-:ven_share.share_quota;
     --     end if;
--          end if;
     --     end if;
--     end if;
EXIT WHEN :SYSTEM.LAST_RECORD ='TRUE';
--NEXT_RECORD;
end loop;
end;
thanks

Can not use any remote desktop like VNC after installing Oracle Linux 6.3

Hi
I just installed OL 6.3 on a HP Proliant ML380 g7. Now I want to connect to the server using any Remote Desktop tools but I can not!
I've activated system>pref>Remote Desktop
But I can not access any of servers from:
- a Mac using, Mac server sharing screen, VNC viewer or Microsoft Remote connection which is in a same subnet
- Other Server Using KRDC, Remote Desktop Viewer, terminal server client or tiger VNC viewer
Also I tried to connect to servers after activating krfb
but it always says no rout to server/ server not found/ connection closed
and remote desktop viewer can not find any host when I try to use option "find"
Please Advise
Thank you in advance

Make sure to enable "require a password..." in the Remote Desktop Preference on the Linux system. Some clients won't work unless this is set. Unfortunately the Remote Desktop Preferences panel on the Linux side does not show you the port it is listening on, but you can get it by clicking on the IP or name that it shows as a link. The first user or vnc server is usually listening on port 5900, then 5901, and so on.
Your problem is probably the firewall on your Linux system. You can disable the firewall on the Linux system:
service iptables stop
However, probably a better idea, simply tunnel the connection through SSH as following:
On the Mac, open the Terminal application from the Applications/Utilities folder. Then type the following:
<pre>
ssh -L local_port:localhost:remote_port -N -f -l username server_address
</pre>
local_port = port on your Mac that does not conflict with any of your own screen-sharing or other services, e.g. 5555
remote_port = vnc server port on your Linux system
username = user for which you have enabled remote desktop sharing
server_address = ip address or FQDN of your Linux system.
For instance:
<pre>
ssh -L 5555:localhost:5900 -N -f -l root 10.0.1.2
</pre>
The trick is now to connect to a local port on your Mac, instead using the address of your Linux server. The communication will be encrypted using ssh going over tcp port 22, which is normally enabled in the firewall.
The Mac screen sharing application is working fine. On your Mac, select "Go>Connect to Server" from the Finder menu and type:
vnc://localhost:5555

I just want to be able to print my pictures and know where to send my memory card.

I just want to be able to print my pictures and know where to send my memory card. HP Photosmart Plus, Windows 7

please tell the complete printer name
using memory card frm printer or computer
if printing from computer go to my computer go to memory card or flash drive & acess the memory card & print the picture file that you would like to. If you like to print frm printer put the memory card to approprite memory card slot & then select the picture to print it will work

I want to be able to print via AirPrint, but I also be able to print my emails,

I want to be able to print via AirPrint, any Ideas on any good app for it.

Do you have an AirPrint compatible printer. See this listing http://support.apple.com/kb/ht4356.
If not, then you could search the App Store for printing apps. They will probably not refer to it as AirPrint.

I have recently upgraded to OSX 10.8.2 and now find that I cannot operate my scanner, an hp psc 1310 series printer/scanner. I get a message saying that Power PC is no longer supported. I am still able to print on the same device. What should I do?

I have recently upgraded to OSX 10.8.2 and now find that I cannot operate my scanner, an hp psc 1310 series printer/scanner. I get a message saying that Power PC is no longer supported. I am still able to print on the same device. What should I do?

Hi,
PSC 1315 no longer supported for scanning since Mac OS X v10.5 or while using any newer OS, there is no scan software provided by either HP or Apple (Image Capture)
You may find this information stated below for Leopard, the same apply for any newer OS version:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01234231&cc=us&dlc=en&lc=en &os=219&product=374568&sw_lang=
Image capture will not recognize your device as well, only print is supported as you may find listed for teh PSC 1310 Series below:
http://support.apple.com/kb/HT3669#HP
Although there is no official scanning support for your device you may still try the 3rd party VueScan software which list your scanner as supported and compatible with Mountain Lion:
http://www.hamrick.com/vuescan/hp_psc_1310.html
Shlomi

While upgrading Adobe Creative Suite CS4 ME into Adobe Creative Suite CS5.5 Design Premium, I get an error saying This serial number is not of a qualifying product, please try another. I used to be able to get a code from customer service but I can't get

While upgrading Adobe Creative Suite CS4 ME into Adobe Creative Suite CS5.5 Design Premium, I get an error saying This serial number is not of a qualifying product, please try another. I used to be able to get a code from customer service but I can't get to the chat. Please advise!!!!

MoeGhazal I reviewed your account and it looks like you have have upgraded from a CS4 volume license for Design Premium to a retail upgrade of Design Premium 5.5.
I also show that you made two purchases of CS5.5 Design Premium but the second purchase was canceled. Please make sure you are utilizing the serial number which ends in 7886.
If you are using the correct serial number then it is likely the installer will not recognize your volume license CS4 serial number as being valid for an upgrade. If you can contact our support team then you can be walked through an unlocking procedure to allow you to proceed with the installation. You can contact our support team directly at Contact Customer Care. You may want to try installing a web browser you have not previously utilized. It is likely a toolbar or some other software application is affecting your ability to access chat support successfully.
If you are still unable to reach our support team then please verify the information under your account is accurate. If you can please then update this discussion after confirming this then I can request a member of our support team contact you directly.
Again I would recommend reaching out directly if possible as it will be the most efficient method of resolving your current error.

Hi. I use windows Xp with service pack 3. I have the latest itunes 11.1 installed in it. I am able to add music or apps to my library but not just videos. Please help.

Hi. I use windows Xp with service pack 3. I have the latest itunes 11.1 installed in it. I own ipad mini. I am able to add music or apps to my library but not just videos. I have already tried removing & reinstalling it. I also have tried with various formats like MPEG, MOV, MP4. Please help.

I already have what you ( ClayandLonnie ) have suggested with the preferences>Shareing Preferences set to share all.
I have tried turing it off, and then back on.
I have tried just sharing specific items and this still did not work.
I am going to try stepping back down to 11.04.4 as previously suggested by TheDarkCanuck when I get home tomorrow. (maybe saturday). I am just leary about having to recreate all my libraries and how long that might take. I have over 1.5 TB of Music and Video, that is why I would like to get it working in the current version.
Just because I don't have a Mac, it seems that this is not being taken as a real problem for the windows 7 users (maybe it is specific to 64bit). I may try the 32bit version to see if that fixes it first. Unless someone else has, and want to chime in.

HT1222 I bought used iPhone and on this iPhone I'm not able to make new account on i Cloud'. How can I use this iCloud's on used iPhone Please help me

I bought used iPhone and on this iPhone I'm not able to make new account on i Cloud'. How can I use this iCloud's on used iPhone Please help me
When I logging there it told me that maximum no of iCloud's Account already activated on this iPhone.
Please help me how can I open new iCloud's account on this iPhone
Regard
Faiz khan

Set up the account using a desktop or laptop, then sign
into that account on your iPhone.
I am not aware of any method around the restriction once
the maximum has been created on any individual iPhne.

I just want to know that if I buy an iphone 4S here in melbourne can i use it in china? i don`t know whether it`s locked or not and i don`t know what`s the network in china as well. Can somebody please help?I am really in a hurry to know it. Thanks a lot.

I just want to know that if I buy an iphone 4S here in melbourne can i use it in china?
i don`t know whether it`s locked or not and i don`t know what`s the network in china as well.
Can somebody please help？
I am really in a hurry to know it.
Thanks a lot.
P.S: For the iphone 4S. is there any difference for the one from online shop or the actual store?

iPhones purchased from the online Apple Store in Australia will be unlocked. To the best of my knowledge, unlocked iPhone are not available from the physical Apple Stores at this time, though you can call the Apple Store in Melbourne and inquire.
Note that the warranty on iPhones is not international, so if you purchase an iPhone in Australia and it needs service, you would have to ship the iPhone to someone in Australia to take or send to Apple for service and then ship it back to you.
Regards.
(Note for any readers: this is an old thread and I posted before noticing the date, but decided to leave my reply in case anyone else finds the thread and has the same question).

I have a power mac g4 with mac os 10.4. 11 , I want to change the hard-drive ,what program can I used to transfer one hard-drive to another hard- drive on this mac pc.

I have a power mac g4 with mac os 10.4. 11 , I want to change the hard-drive
,what program can I used to transfer one hard-drive data to another hard- drive on this mac pc.

The Disk Utility, Carbon Copy Cloner, SuperDuper, or similar software. For best results, place the second drive inside the computer or in a FireWire enclosure and boot the computer from it before removing the internal drive.
(66989)

I want to be able to print using windows remote desktop services what printers can i use?

Similar Messages

Maybe you are looking for