I want. to blow. my brains out.

I am o frustrated with this program I could scream. My project has been fine as far as music for the past two weeks I've been working on it. Recently I've changed my password to my iTunes Apple ID account. Some of the songs I'm using for the project are ones from there. I authorized my computer about 7 times but it keeps saying must authorize it before I play it (note: it plays fine in iTunes) and in some cases it will say I need to have iTunes 4 or above (I have iTunes 7.3.3 [3]). So I don't understand. It was fine yesterday playing all those songs. I've restarted my computer and shut down all my programs and refreshed but the same thing comes up. UGH.

According to another Apple Contributor:
"It is just barely possible that this is caused by a bad Ethernet port, especially if the user connects to the Internet wirelessly, as iTunes authorization is based on the wired Ethernet MAC ID.
Check in System Profiler > Network > Built-in Ethernet > below Proxies, is Ethernet listed and if so does it have a MAC address? If not, the port has failed and is causing this issue."
Or it may just be the fact that you changed your ID?
Sue

Similar Messages

  • WRT160N issue. I'm about to blow my brains out.

    Ok, so let me give the backstory.
    We're using this router for a small business. We went to one of our locations. I'll refer to this location as location #9.
    Anyways, we went to #9 with intentions of installing a Sonicwall, which is a router/firewall. Before we installed it, we were currently set up with a WRT54g. They have cable internet. So, the cable was going to the modem, which is then connected to the WRT54g. We had a server, a PC, and a thin client hardwired to the WRT54g. We also used the wireless capabilites so that the doctors at #9 can access their email/internet on their laptops wirelessly. Everything was working great.
    So we get there to install the sonicwall, we remove the WRT54g and use the sonicwall as our new router. We hard wired the computer and server directly to the sonicwall. We're using the sonicwall as our default gateway at 192.168.9.1. We set static IPs and entered the DNS settings in the computer and the server, to make sure that they can access the network/internet. The PC and the server are running perfectly fine. The WRT54g is no longer being used at all. It's no longer in the picture.
    NOW... here's where this all gets stupid. We also hardwired a brand new WRT160N router into the sonicwall. We have an ethernet cable in port 5 of the sonicwall, into port 1 on the WRT160N. Wirelessly, this somewhat works. I can access the network, BUT I CAN NOT GET INTERNET TO WORK WIRELESSLY AT ALL. I even hardwired a computer to the WRT160N and that worked perfectly fine, but as soon as I remove the hardwire, I can connect wirelessly, but no internet.
    Within the WRT160N,  under setup, it is set to Automatically Configure-DHCP. I was on the phone with Linksys for hours yesterday trying to get this resolved, but unfortunately... nothing. The WRT160N's IP is set to 192.168.9.2. The girl from linksys had me disable NAT in advanced routing and she also had me disable DHCP server under setup. They already walked me through cloning a MAC address, but that shouldn't be an issue. I shouldn't have to clone the MAC address of each computer that wants to access wireless internet.
    Someone please help me. I've been trying to get this fixed for a week and it's costing me a lot of time and money.
    If I need to provide more information, I can do that easily.
    Thank you. 
    Solved!
    Go to Solution.

    OK...I found a Deployment Scenario in the SonicWall manual that looks like it may be similar to what you are trying to do...
    Take a look starting at page 174 in this manual:
    http://www.sonicwall.com/downloads/SonicOS_Enhanced_4.0_TZ_180_190_Administrators_Guide.pdf
    If that doesn't work, you may want to think about talking to Sonicwall directly, because I am pretty sure this is a Sonicwall configuration issue, and as I have said, I am not really familiar with them, and to have you run through your setup on the sonicwall over this forum could take days!!
    Tomato 1.25vpn3.4 (SgtPepperKSU MOD) on a Buffalo WHR-HP-G54
    D-Link DSM-320 (Wired)
    Wii (Wireless) - PS3 (Wired), PSP (Wireless) - XBox360 (Wired)
    SonyBDP-S360 (Wired)
    Linksys NSLU2 Firmware Unslung 6.10 Beta unslung to a 2Gb thumb, w/1 Maxtor OneTouch III 200Gb
    IOmega StorCenter ix2 1TB NAS
    Linksys WVC54G w/FW V2.12EU
    and assorted wired and wireless PCs and laptops

  • Ready to blow my brains out

    I have a g5 1.6 from 10/03 and recently upgraded to 10.4.2. Have done all the updates. Upgraded to FCP hd4.5
    I have hit or miss luck getting DVDs to burn after exporting through compressor 1.2.1
    Can someone jump in and give me some direction.
    I have DVDs to deliver and need HELP!!!!
    please
    thanks

    Try this for OSX 10.4:
    http://www.apple.com/support/downloads/proapplicationsupport30macosx104.html
    and this for 10.3.9:
    http://www.apple.com/support/downloads/proapplicationsupport30macosx1039.html

  • Ever since the up dates... Any of my photos that I use and want to set as wall paper... The software blows the picture out of portion and no way of cropping it and keeping it at the regular size!!!! How can this be fixed!!

    Ever since the up dates... Any of my photos that I use and want to set as wall paper... The software blows the picture out of portion and no way of cropping it and keeping it at the regular size!!!! How can this be fixed!!???

    Hope this helps:
    http://ios.wonderhowto.com/how-to/fixing-ios-7-wallpaper-woes-scale-crop-align-d esign-perfect-iphone-background-0148750/
    Please reply with any further questions.

  • My ipod touch 1st gen has gone into recovery and wont restore because of a error 1 or something like that can someone help me quick this ipod is my little cousins and i dont want her mum to find out what happend

    my ipod touch 1st gen has gone into recovery and wont restore because of a error 1 or something like that can someone help me quick this ipod is my little cousins and i dont want her mum to find out what happend

    I have not seen a solution for error (1)
    make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I want to plug my apple tv into a projector but i want to break the sound out and plug this in to a sperate audio solution which has 2 phono's. Is there a lead that does this?

    I want to plg my apple tv in to a projector but i want to break the sound out to a seperate audio solution. Is there a lead that I can use? The sound system has 2 x phono connections?

    The sound can already be "broken out" by using the optiocal cable jack. That, of course, assumes your audio input is capable of optical inputs. If not, you might have alook into something like this: https://www.google.com/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=opt ical+to+rca+converter&tbm=shop

  • How can I delete or remove my apple account ID from iPhone i want to sell or give out as a gift?

    how can I delete or remove my apple account ID from an iPhone I want to sell or give out as a gift?

    You didn't see this bit?
    "Your content won't be deleted from iCloud when you erase your device."
    You only lose iCloud data from other devices if you manually delete the data. If you Erase all content and data, you keep iCloud data elsewhere.

  • I have just installed 10.7 and bootcamp is no longer visible on my desktop, nor can i start computer in windows mode. I started the bootcamp 4.0 upgrade assistant, but don't want to wipe windows 7 out and lose my data. Any suggestions?

    I have just installed 10.7 and bootcamp is no longer visible on my desktop, nor can i start computer in windows mode. I started the bootcamp 4.0 upgrade assistant, but don't want to wipe windows 7 out and lose my data. Any suggestions?

    I have just installed 10.7 and bootcamp is no longer visible on my desktop, nor can i start computer in windows mode. I started the bootcamp 4.0 upgrade assistant, but don't want to wipe windows 7 out and lose my data. Any suggestions?

  • In reports, i want to display currency field out put with diff currencies

    Hi all
    in reports, i want to display currency field out put with different type of currencies like 1st record in rupees 2nd record in dolors 3rd record in       
    Euros. for this i should not use any tables and any currency fields and any functional modules. pls give replay urgently.

    Hi swamy,
    so sorry, but you have to use some of the objects you do not want to:
    Currency values in ABAP are stored in currency fields (type CURR). If they are stored in structures or database, every CURR field must be connected to a CUKY field (currency key).
    Displaying data using WRITE statement four output on a list is obsolete technique, you may use the use WRITE with the option CURRENCY c to format according to currency c in table TCURX.
    SAP recommends to use ALV technique. If you use ALV to display structure data, then create a dictionary structure with currency value and currency key. The rest goes automatically.
    Believe me: It is much easier and more reliable.
    Regards,
    Clemens

  • My iphone is at tech service and since it is in guarantee period most probably they will give a new one.Thats why I want to deactivate or sign out my apple ID from that Iphone. Please help me, what shoud I do?

    My iphone is at tech service and since it is in guarantee period most probably they will give a new one.Thats why I want to deactivate or sign out my apple ID from that Iphone. Please help me, what shoud I do?

    Wow... you seriously over paid for an iPhone.
    That probably explains why you have/had no clue you were purchasing a locked device and think it's an Apple problem to get it unlocked.

  • Just want the information to be out there - my My Mac Book Pro has been stolen! Serial no W8*******ATN, model no A1278. Is there anything I could do to traci it or at least block it ??

    Just want the information to be out there - my Mac Book Pro has been stolen! Serial no W8****ATN, model A1278 what could I do to track it or at least block it?
    <Personal Information Edited by Host>

    You can use iCloud to lock it if you had that set up. Otherwise, the only thing to do is report the theft to the police. You may want to contact your homeowner's insurance to see if it would be worth filing a claim with them also.
    ~Lyssa

  • I want to report my telephone out of order

    i want to report my telephone out of order

    You will need to report the fault to Sky directly and the only way to do so is by phone.
    You can call from a mobile and the calls to the 03 numbers should be free with inclusive minutes or charged at local rates.
    You can also download the Sky Service App and call via it, should the wait be longer than 2 minutes you can request a call back (again this call should be free with inclusinve minutes or charged at a local rate)

  • HT5312 Hi i want to purchase a Brain game through my i phone , they ask me to answer the secret quations which i forget , how to do ?

    Hi ,
    I want to purchase a Brain game , from my I phone but the ask me to answer the secrets quations which i forget , what to do ?

    Read the HT5312 page that you posted from, it has instructions for how to reset them i.e. if you have a rescue email address on your account then steps 1 to 5 half-way down that page should give you a reset link.
    If you don't have a rescue email address then you will need to contact Support in your country to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

  • HT3231 I have completed migration, is it possible to merge the two account now? or a short cut to share information? I don't want to log in and out each time I want to see my old data.

    I have completed migration, is it possible to merge the two account now? or a short cut to share information? I don't want to log in and out each time I want to see my old data.

    No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
    For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

  • I am using iphone 3gs n i wanted to update help me out how to do....?

    i am using iphone 3gs n i wanted to update help me out how to do....?

    To update
     your iPhone:
    Be sure you have iTunes 10.7 (11 will be released soon)
    Plug in your iPhone
    Go to the iPhone summary screen
    Hit "update"
    If the update fails
    Go on your search engine and type "iPhone 3GS firmware GSM" or "iPhone 3GS firmware CDMA" and download the latest firmware from there.
    Place the downloaded firmware on your desktop or in your downloads page
    Go back to the summary page
    Hold Shift and click update
    Find the firmware in your saved location
    A question will pop up asking if you want to install the firmware

Maybe you are looking for