I want to Boot from My old hard drive.

I an trying to do this work around so I can continue using protools 7 with my MBP running Snow leopard. I pulled out my old hard drive running Tiger and put it into a USB case. I installed a new 650GB hard drive in to my laptop, installed Snow Leopard and reinstalled all my old software. So far so good. Now I want to boot from the old hard drive running Tiger so that I can launch Protools 7. I choose the external HD as the startup disc and end up getting a circle with a line through it on startup.
Is there something else I need to use my old hard drive running Tiger as a startup disk?
Thanks!

If the original HD still has the version of Tiger installed on it that came with the MBP (probably Mac OS X 10.4.8, build 8N1037, 8N1051, or 8N1430) or a later version of Tiger like 10.4.11, then the MBP should be able to boot from it.
To determine what OS & build number is on that drive, open the Startup Disk system preference. Hover the pointer over the drive's image in the window & the OS version & build number will pop up in a ToolTip window after a brief delay. What does it show?
Also, which MBP do you have? Open System Profiler to the Hardware Overview page. What is the Model Identifier shown in it? Is it "MacBookPro2,2" or something else?
Assuming the OS version & build number are sufficient to boot the MBP, it may be that the USB enclosure does not support booting. Most do, a few do not. What is brand/model of the enclosure? Do its specs specifically say it can boot a Mac?
If all of this seems OK, you can try running Disk Utility's two repairs (permissions & disk) on the external drive. If no errors are found, you may be able to get it to boot the Mac by reinstalling Tiger on it from the original system disc set. This will require updating the OS to the latest version you had installed on it for best results.

Similar Messages

I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this

I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this?
I have iPhoto version 9.1.5 (615)
Mac OS X version 10.6.8
I want to do this because when I imported from my old hard drive there was an error message stating that 12 photos were not imported as the programm did not recognise the format even though they were jpegs like the other photos in that particular album. The dates of the photo folders are wrong I have multiple copies of photos and every time I start iPhoto I get the following message 12 photos have been found in the iPhoto library that were not imported would you like to import them No or Yes
if you press Yes the same message comes back again and if you press Yes again the program flicks to last import for 2 seconds and then opens events.
if you press No the message The photos have been placed in the folder/user/judith/pictures/iphoto Library recovered photos then if you press OK the original message 12 photos have been found.............
if you press No at this point the message The photos have been placed in the folder/user /judith/pictures/iphoto Library recovered photos_11 the end number goes up by 1 every time you go through this process
Any help would be greatly appreciated

Did you import an iPhoto Library from the old Hard Drive? Do you still have that old Library?
The way to clear out a Library is to Export the photos - Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
For the annoying start-up message:
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Import' or 'Importing'.
Drag it to the Desktop. *Make no other changes*.
Start iPhoto. Does that help?
If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.

I'm about to transfer the contents of my existing HDD in my (dead PSU) iMac to another computer. I'm just wanting to know if and how I will be able to access my files and documents from the old hard drive once I've made the backup?

I'm about to transfer the contents of my existing HDD in my (dead PSU) iMac to another computer. I'm just wanting to know if and how I will be able to access my files and documents from the old hard drive once I've made the backup?

You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
You need to get a new computer or a refurbished one.

How do I recreate my library from my old hard drive?

I've been reading around and can't quite find a solution for my problem.
My hard drive boot sector crashed, so I had to install a new one. However, I can still access my iTunes data (library data, music, applications) from the old hard drive.
In my old Windows XP installation I had users. So my iTunes library was stored in the \documents and settings\my user\my user's documents\my user's music\iTunes. In my new installation, I just went away from users as it was just too much and did not add any value to me. So once I installed iTunes, my new (still empty) library ended up in \documents and settings\administrator\My documents\My Music\iTunes
I want to recreate my library (copy everything) in my new hard drive, as I can't trust the old one any more. I still have it connected to be able to recover all my old data, but once I do that I will take it out from the computer.
Any one can help in on what to do? While I don't want to loose my 'library data' I am also concerned with my applications, ratings, and all the 'music data' I have edited along these years that I am guessing is in the library files (as opposed to the actual music files).
Thank you!

Ok, so I just did it. After launching iTunes again I got an 'Updating library' message for a while, then I was able to see my whole library, BUT... most songs (not all) had an exclamation mark, and iTunes says it can't find the original file. I spot tested and they are in there (under the iTunes Music structure within the corresponding 'artist' folder). So I went ahead, changed the iTunes folder in the Preferences to point to the new 'iTunes Music' folder, and after that I could see everything. I did the 'Library Consolidation' after that (probably did not have to do that) but.. that gave me strange results:
Now I have a 'Music' folder within the 'iTunes Music' Folder, with all my music, but I still have a few artists at the 'iTunes Music' level, and even at the 'iTunes' level. Seems like they are duplicated... as they were also copied down to the 'Music' sub-folder.
Movies and podcasts seem to be fine.
I can't see the 'Applications' entry in iTunes. Any idea?
Thank you!!

How do I transfer applications & data from my old hard-drive to my new one?

My old hard drive started to crash, it was on it's way out and making funny noises. I have brought a new hard drive and connected it to the same leeds as the old one. I have put the opperating system on to the new hard drive and it is all up and running..... but.
I want to transfer all my old applications like garage sale and limewire without having to pay for them again and transfer all my music and photos from the old hard drive to the new.
So:
1: How do i get the old hard drive out of the position it's in it seems glued in and i can't see any screws?
2: How do i connect both hard drives and transfer everything from the old to the new? Do i need to buy another set of leeds or should they be in the computer
Your help would be most appreciated.....
power mac G4 466MHz Mac OS X (10.3.9)

Hi
You should be able to have both drives installed at the same time in the rear U shaped bracket. One needs to be mounted in the bottom of the bracket, have it's jumpers set to master and be connected to the end connector of the ribbon cable. The other needs to mounted above it, have it's jumpers set to slave and be connected to the middle connector of the ribbon cable. The computer should have the leads to do this, i.e. one ribbon cable with two connectors and two molex power connectors. With both drives installed, you can then drag your music and photos etc from the old to the new. You could try dragging the applications, although if they install additional files elsewhere they'll need to be reinstalled from the original CDs or DVDs.
The old drive may be screwed into the U shaped bracket from below. There should be a single screw which secures the bracket to the chassis at the front, although it may be hidden under the ribbon cable. If you unplug the ribbon cable and undo the single screw you can remove the bracket still containing the old drive, by sliding it forwards and lifting it up at the front. The screws securing the drive to the bracket can then be undone from beneath.

How do I import Bookmarks from my old hard drive to the one in my new mac?

How do I import Bookmarks from my old hard drive to the one in my new Mac? The old drive is installed in Bay 2 of my new Mac.

Hi
Home/Library/Safari/Bookmarks.plist is the file you want. Use a copy, just in case & do it with Safari quit.

How do I boot from an alternate hard drive?

How do I boot from an alternate hard drive?

Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the "OPTION" key.
3. Release the key when the boot manager appears.
4. Select the desired disk icon from which you want to boot.
5. Click on the arrow button below the icon.

HT5096 where is the administrator window when I drag the folder "Backups.backupdb" from the old hard drive on the new one?

where is the administrator window when I drag the folder "Backups.backupdb" from the old hard drive on the new one? At the moment when I try to do it, the window that appear doesn't allow me to continue. it only says "the volume has the wrong case sensitivity". thanks

Although the documentation says you can copy Time Machine backups in the Finder, it's very slow and sometimes doesn't work at all.
Launch Disk Utility, open the built-in help, and search for the term "Duplicate." Follow the instructions. All existing data on the destination volume will be erased. That shouldn't be a problem, because you don't want to mix backup and non-backup data on the same drive anyway. Turn Time Machine OFF in its preference pane while copying the volume.

My Macbook air flash had gone for a month and I saw Apple's Macbook air flash storage drive replacement program. I'm not sure whether that program is still available for the broken device or not. Now, I'm booting from the external hard drive. Thank you.

My Macbook air flash had gone for a month and I saw Apple's Macbook air flash storage drive replacement program. I'm not sure whether that program is still available for the broken device or not. Now, I'm booting from the external hard drive. Warranty has gone in October 2013..
I want to send back my macbook air back to apple store. The problem is that I bought it from US and now, I'm using it in Myanmar. If the program is free of charge for my device, it's worth trying to send back to US. Since mine is broken, I'm afraid Apple will take charges for reparing.
So, if anyone having the same problem as me, I would like to get suggestion....
Thank you!!

I have no idea about how to handle the international aspect of your question.
But here is the Apple writeup about the problem and the remedy. Maybe that will help you.
http://www.apple.com/support/macbookair-flashdrive/

What is the exact name of the cable I need to connect my old hard drive from my macbook pro (it has been taken out of the computer) to my new macbook pro? I need to transfer files from the old hard drive to the new computer.

What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro? I need to transfere files from the old hard drive to the new computer.

No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2?

HT1386 my pc crashed and I bought a new laptop and was able to recover all my music from the old hard drive and transfer it to the new pc. I bought a new album on itunes and am unable to download it on my 6th nano even though I authorized the new pc. An

My old PC crashed and I ended up buying a new one. I was able to recover all my music from the old hard drive and restore it in itunes. I purchased a new album online thru itunes and added it to my library. When I tried to add the album to my 6th nano it wouldn't download. All the tracks are check marked and I can listen to the album on my pc but it won't sync onto the ipod. The new pc is authorized, any ideas?

You can only sysc with one iTunes library. The new computer is a new library. You have to restore your iPod on the new conputer and then sync.

How can i recover my data from an old hard drive after replacing it?

How can I recover my data from an old hard drive after replacing it?

Internal or external hard drive? Was the drive still working before you replaced it?

My old computer has broken and I had not backed up my Itunes. I now have the hard drive from my old computer but cannot transfer the music. How can I transfer the music from my old hard drive to the new laptop?

My old computer has broken and I had not backed up my Itunes. I now have the hard drive from my old computer (windows 7) but cannot transfer the music. How can I transfer the music from my old hard drive to the new laptop (windows 8)?

Copy the entire iTunes folder from \Users\<User>\Music on the old drive into your music folder on the new computer.
Or see Recover your iTunes library from your iPod or iOS device.
tt2

I have upgraded to a new computer. I have installed iTunes from the internet and copied my music from the old hard drive to my new one. What do I need to do to get my new computer to recognize my old playlist?

I have upgraded to a new computer. I have installed iTunes from the internet and copied my music from the old hard drive to my new one. What do I need to do to get my new computer to recognize my old playlist?

See https://support.mozilla.com/en-US/kb/Backing%20up%20and%20restoring%20bookmarks
and
https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information?s=new+computer&r=4&as=s#os=win&browser=fx8

My computer died. Can I recreate my iTunes library from my old hard drive?

My computer died and I had not backed up my iTunes library (I know, I know). The crash was not due to a corrupted hard drive, however, and I can access all the files from my old hard drive with my new computer, including any iTunes files. Can I recreate my iTunes library from these files on my new computer?
Thanks!!

Yes.
Transfer the iTunes named folder located in the Music folder from the hard drive on the failed computer to the appropriate location on your new computer - with iTunes quit when doing so.
In Windows Vista and Windows 7, click the triangles next to the folders and drives to navigate. In Windows Vista, the default location is: \username\Music\iTunes. In Windows 7, the default location is: \username\My Music\iTunes.

I want to Boot from My old hard drive.

Similar Messages

Maybe you are looking for