I want to build a power quality monitor and analyzer using labview.

has anuone worked on this? has anyone got the codes of the same?

Hello,
I have uploaded the EPM 2011 here
http://www.sendspace.com/file/bseej3
Hope you find this useful.
-Avichal (C.L.A.D)
(AE, NI India)

Similar Messages

  • Have my MacBook Pro plugged into a monitor and also using a wireless keyboard. I want to close the macBook but every time I do the monitor turns off - is there a way to avoid this?

    Have my MacBook Pro plugged into a monitor and also using a wireless keyboard. I want to close the MacBook but every time I do the monitor turns off - is there a way to avoid this?

    Press any key on the wireless keyboard after you close the MBP and it goes to sleep. The computer will wake up with the external monitor as its display. This is called Clamshell mode.
    http://support.apple.com/kb/HT3131

  • Hello,how much does the iphone 4 16gb unlocked cost if i want to buy it as a gift and to use it outside USA?

    Hello,how much does the iphone 4 16gb unlocked cost if i want to buy it as a gift and to use it outside USA?

    If you're talking about buying the phone in the US, forget it. There are NO unlocked iPhones sold in the US and no US iPhone can be officially unlocked. Thus, it doesn't really matter what it costs.

  • Would like to monitor and control a labview application with a hand held device.

    Would like to monitor and control a labview application with a hand held device.
    Would like to use a palm or ipac on a local area network or communicate directly with the PC running windows.

    LabVIEW doesn't run on a hand held device. But, check out these documents:
    Is it Possible to Use Remote Front Panels to Control a LabVIEW VI Remotely Using my PDA?
    "What OS is recommended for LabVIEW to run on a PDA?"

  • HT1338 hello, i have mac os x version 10.6.3 and i want to update to os x lion and could use I cloud, so could you help me to do it because I have already done like it says here and inthe middle cut the downloading so couldn't, thanks, mariano

    Hello,
    I have mac os x, version 10.6.3 in my macbookpro  and i want to update to os x lion and could use I cloud, so could you help me to do it because I have already done like it says here and inthe middle cut the downloading so couldn't, thanks, mariano

    If you have 10.6.3 you need to update to 10.6.8 first. So, http://support.apple.com/kb/DL1399

  • IMAC 24" screen went dead. Can I buy a mac compatible monitor and still use the IMAC hard drive?

    IMAC 24" screen went dead. Can I buy a mac compatible monitor and still use the IMAC hard drive - which is still working? I took it to the Apple store and they quoted $500+to replace the monitor. No help as usual. Can I buy a MAC compatible monitor ($189) and use it as a primary monitor? Can I set it up if the screen on the IMAC is dead? Any other solutions?

    The only negative to not having the original drive will be the work needed to reinstall all the apps and reconfigure to your liking. You will also have to decide whether to stay on Lion (which you should update to 10.7.4, BTW) or bite the bullet and take a leap of faith on Mountain Lion.
    In either case, to simplify matters you would do well to concoct a Lion or ML bootable installer on a USB stick. In either case, you need to get the corresponding installer downloaded onto the hard drive and, instead of running it to execute the install, extract the coveted InstallESD.dmg image from which you construct the bootable installer. See here for details: https://discussions.apple.com/message/17782820#17782820  The procedure applies the same to both of the latest cat flavors.

  • I want to have a progress bar monitor and display the progress of a file being opened, How do I do it?

    I have written large files for a report. When I open the files in the VI by pushing a button I want to view the progress of the file being opened. My first thought was to get the file size, some how measure the number of bytes comming out and monitor it on the progress bar. I am unsure about how to do this. If you know of a better way to monitor and disply the progress of an opeing file please let me know.

    If I understand you correct the progress bar is not the problem, it's to get a numeric value indicating the progress...right?
    If so then you could read the file size, preallocate a byte array to hold the file, then read it in chunks and put the chunks into the array using replace array elements...(you could concatinate strings, but that would easily become very memory and speed expensive...)until you have read the entire file. If the file is 20 MB and you want the progress bar to have a resolution of about 1% read it in chunks of 256 KB...For each chunk read, increment the progress bar...
    MTO

  • Power quality parameters and measurements

    hi friends....
    can any one help me with the coding of voltage sag and swell in labview 8.0? Thefigures are attached below.
    Attachments:
    sag.jpg ‏2 KB
    swell.jpg ‏2 KB

     Hi,
          I have attached the screenshot of a VI for Voltage Sag. You can similarly build it urself for Swell.
    Hope that helps.
    Shreyas Hebbare
    Shreyas Technologies
    India

  • Both Monitor and TV use with 1 adapter?

    I have a 13" MacBook. I also have a nice 19" Samsung flat screen monitor lying around here. Since my laptop sees most of its duty on a table during the summer (no school), I'm thinking of getting the monitor and a keyboard and hooking it up, even though it's enormous.
    Now, I know all I need is a Mini-DVI to VGA connector (apple sells it for $19).
    But the thing is, I'd like to also be able to connect my laptop to a TV (meaning I need the mini-DVI to Video connector, $19 again).
    I could buy both, but I don't want to spend $40 on just connectors. What's my best option? Is there any other way?

    Some TVs have VGA connectors on them, but I'm guessing yours does not. In that case, I think you are stuck buying two adapters.

  • Building SCADA software for substation automation control using LabVIEW

    Hi, I would be interested to know if anyone has built or developed a SCADA software for substation automation control using purely LabVIEW and its add-on tools (beside NI LookOut). The SCADA software, somehow similar to WinCC, should fulfill basic SCADA function for substation such as monitoring and interlocking control of CB and DS (single/double point), generate event or alarm list which includes information such as topical/not topical, valid/invalid...., archiving, redundancy, etc.

    Hi Remzi,
    Thank you for your information.
    I understand that the DSC Module is a tool capable of developing monitoring and control system. Using the module would enable me to build a SCADA software (similar to LookOut) according to my requirement. But I think it's quite a difficult task to design and build a SCADA software from the scatch. Unlike a SCADA software, the DSC module is not really a SCADA software where user can directly parameter the I/O points and graphics via GUI. I've actually tried the LookOut software, but found that it's not really suitable for substation automation & control field. Hence, I would be grateful to know if anyone in this field has developed similar SCADA software for substation automation.
    Best Regards,
    Edmund

  • Monitoring and recording using my audio interface

    I am new to the logic express program. When I try to record with my audio interface (whether mic or instrument), do I always have to go to the "Device Input" settings and swithc the input to my interface? Even when I do that, the bars move indicating sound, but I cant hear it...dont know what I am doing wrong?
    So basically, right now, I record without being able to monitor, then when I want to hear it, I have to switch the device input back from the interface to the default device?
    It seems I am making this harder than it is.
    Thanks for the help.

    I am having the same problem (using a presonus firepod). Tried the aggregate solution but it is not working.
    Steps I took: Aggregate Device Editor > selected firepod and built-in output. Then in Audio Midi setup selected aggregate device as default input. In Logic Ex 8, preferences>audio>enabled core audio and selected aggregate device as the driver. Created a new track, tried using input monitoring and the record button. I can see the levels go up and down, so there is signal, but no sound for me to hear. The inputs and outputs for the track are input 1 outputs 1&2.
    So am I doing something wrong?
    Thanks guys.

  • Spellman power supply SL40PN2000 remote control using Labview

    We have a SL40PN2000 Spellman power supply. We want to do remote programming using Labview program.
    We want to control the voltage output. 
    Many thanks for your help.

    You need to first determine the remote control interface. Is it GPIB, RS-232, Ethernet, USB, etc.? In the case of GPIB, you would need to purchase a GPIB controller.
    There is not an existing instrument driver but you can review the information here on what a driver is and how to devleop one.

  • HT2534 I want to remove my credit card info and only use iTunes cards

    I want to remove my credit card info on iTunes and just use iTunes cards

    Go to http://www.apple.com/support/itunes/account/ and look under Managing Your Account Section and click on Changing Account Information or http://support.apple.com/kb/HT1918
    Hope this Helps
    Let me know.

  • Power quality monitoring

    Hi mathan,
    Thanks for your help.....but there is a problem.
    The amplitude of the output  wave is decreasing parabolically,instead it should decrease suddenly for a short time interval.
    For better viewing,i am attaching another picture.
    Attachments:
    Sag_sml.jpg ‏8 KB

    Duplicate here and here.
    Please don't create separate thread for same question. Stick to a single one so that people will find it easy to answer your query. So continue in your original post. Please attach the image in this thread to your original post here and wait sometime till somebody will surely respond to your query.
    Thanks for your understanding,
    Mathan

  • Building of a Robust Spline Profile Filter using Labview

    Hi Thank you to anyone that followed me here from my previous post.
    I am looking for some help with the building and implementation of the above mentioned filter. I have the mathematics attached. I will have access to Labviews Digital Filter Toolkit in a couple of days.
    The purpose of this filter is to create a mean line through the peaks and vallys of a surface profile. 
    Attachments:
    Spline Filter.docx ‏431 KB

    Hey Simone,
    I have used some basic labview code to generate a couple of matrices and I've done some basic calculations, I was hoping to show you how to implement them. As for the spline filter there is on in the DFT, if you press CTRL+Space bar it will bring up LabVIEW search (this takes some time to load) the type spline and you should find it.
    Regards
    Andrew George @ NI UK
    Attachments:
    matrix.vi ‏12 KB

Maybe you are looking for