I want to but can't play WAVs and MP3s in the same folder, please he

Hello,
I have a Zen Nano Plus. One of the reasons I got it was because it has a built in microphone. When you record with the mic it saves it as a WAV file, and puts it in the "recorded" file. I want to make a folder with both songs (mp3s) and bits of spoken word that I record in - so that when I play it I can select shuffle and it will randomly play either a song or a recorded part. (It's for a friend in a coma and we want to leave it playing her favourite songs as well as messages from her friends.) When I make a new folder it won't recognise WAVs only the MP3s, and when I put MP3s in the "recorded" file it won't recognise them, only the WAVs. The shuffle option will only shuffle between tracks in the same folder. I've called the help line and spent half an hour talking to them but nothing was solved. I realise that I can convert the WAV files into MP3 files (anyone recommend a good, free converter?) but would rather not have to do this. Also, if it is possible to play both in the same folder, can I also record through the mic directly into this folder? This would save me having to take it home whenever a new message is left to organise the tracks.
Any help given very much appreciated,
Anil.

Firmware is the operating system of the player, written by Creative. Peebee is saying that it would require a fundamental change to this operating system, which would need to be reprogrammed by Creative. You can by all means request it as a wishlist item, by sending to support, but there's no guarantee it will be implemented.

Similar Messages

Can i play podcast and music at the same time

i have a suffle 3g and I want to use it for running. I want the instructions from the couch to 5k podcast but with my own playlist? is this possible

You should be able to plug in the computer and go. The Mac will automatically switch over to the cabled connection.
You don't need a static ip address for each computer. They will show up just as before.

I just purchased a new laptop, so consequently had to buy Itunes Match to get all of my music back. Now everything is in the cloud, and I can't play them and cannot make a cd. Please explain how I can get

I just purchased a new laptop, so consequently had to buy Itunes Match to get all of my music back. Now everything is in the cloud, and I can't play them and cannot make a cd. Please explain how I can get my library out of the cloud and keep them on my computer so they are available when I want them? Wow.......why have you made everything so difficult now?

SKF5656 wrote:
I just purchased a new laptop, so consequently had to buy Itunes Match to get all of my music back.
No you didn't.
Now everything is in the cloud
Except for anything you did not purchase in iTunes Store.
Only you iTunes purchases are in the cloud.
Reada the article that brenden dv posted to copy your iTunes library to new computer.

Hello..Does anyone in this community know what the following error code indicates   0x8002006E   I was trying to burn a DVD from files in a burn folder. They were pictures from my Nikon camera. I can play videos and movies from the same dvd player.

I was trying to burn a DVD from files in a burn folder. They were pictures from my Nikon camera. I can play videos and movies from the same dvd player.    Thanks for any help you can offer,

Thanks for your reply:
I did find an error log related to the error code and tried all suggestions on the list of recommendations, still no luck
I definitely am running OS X10.5.8 (hopefully will be updating later on this month)
I tried several brand new discs from the same box, still no luck.
My last option is to go out and try a different brand, guess I'll go with Verbatim this time but I think I'll poke around some more before buying 20 more new discs.

My SB Audigy 2 card can't use headset and musicamplifier at the same time

Hi, i just bought a SB Audigy 2 [D400] and i have downloaded drivers and programs. I run Windows XP SP2.
The soundcard works fine but it is very very annoying that i physically have to change the jack in the green=line out jack from headset to musicamplifier when i want to use my musicamplifier and change back the jack in the green=line out from musicamplifier to headset when i just want to use the headset/headphones .
In the shop they told my that i can connect both amplifier and headset at the same time and then with creative software control whether there is sound in the headset or in the amplifier. But i can't simple get it work.
I tried to use the green to the amplifier and the headset/speakers in the black (line out 2) and then with creative speaker settings softeware choose headphones but still the ampliefier receive the sound and no sound in the headphones. Why? In fact no matter what configuration i try the headphones doesn't work.
But if i change the jacks so headset is in the green line out then only headset is working and the amplifier doesn't work no matter i put it in sort=line out 2 jack or orange=line out 3 jack.
Can somebody here tell me if it is possible or not to connect both headset and external amplifier and control by software which to play? and how?
please help, thx.
Michael

If you can have an ASIO compatible music playing system, then it might be possible to have system like you wish when using Creative Audigy 2 card. Since ASIO bypasses Windows Audio System, you can use both 'drivers' (ASIO - WDM/MME/DS) side by side.
Say you want to play a game (using headset /w mic) and someone other like to listen music at the same time. With ASIO capable system you can output your music for example to "center L/R (stereo) channels" and same time output sounds from other source (using MME/DS/WDM drivers) to normal output channel (Front L/R). Only thing is, you need to set your speakersystem to 4 or 6 (depending which other channel you're using) (and for better 'balance' to adjust "angle" on THX console. You get the THX console by installing Audigy 2 Zs software).
Try for example http://img332.imageshack.us/img332/463/djs9mo.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
Another option:
Say you want to play music through external amplifier and play game online with your headset + microphone (eg. others but you listen the music, you play games)
--> try free http://img332.imageshack.us/img332/4589/tbp7rz.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
If you use ASIO on BeatPort Player you can select L/R individually from the list(s). Same rules as described earlier.
= You can play from 2 different sources simultaoneusly (ASIO + WDM/MME/DS) to two different outputs without disturbance. The other (WDM/MME/DS) source is set 'automatically' output to (Audigy) "green" port, and the other (ASIO) to "black" or "orange" port (as set).
.jtpMessage Edited by jutapa on 09-5-2005 05:30 AM

Can you have pages and word on the same computer

can you have pages and word on the same computer

Sure, I do (my Office is 2008 but I keep it around for some things I get from work).

Can't save an edited PDF to the same folder it originated from

Can't save an edited PDF to the same folder it originated from. Error "cannot save the document is read-only or is open by someone else" and then it prompts to save the document to another folder or change the name of the document. This is not what I want to do! Using WIndows 7

Hi JC_AUS,
Thank You for posting on the forums. This can happen if the preview of the document is opened in preview pane in Windows Explorer.
Kindly switch off the preview pane and then try the same.
Thanks,
Vikrantt Singh

Can't recording Midi and Audio at the same time

I'm in GREAT need of help. I can't record midi and audio at the same time. I'm using an M AUDIO project mix I/O. I know this is VERY basic stuff but I can't seem to get it to work.I can record multiple audio at once. ANd I can record midi but not at the same time. PLEASE help . Is there a setting somewhere I need to change ? Thanks
Tracy

Hi!
Enable all audio tracks (R) you wish to record. Then make sure you select the audio instrument you are using on the left of the arrange page (track list). If you here your input, hold shift, then highlight (gray) the mentioned audio tracks you wish to record on. When R is red, and the proper tracks are grey, you can record. Hope that made sense!

Can we use exceptions and conditions at the same time?

can we use exceptions and conditions at the same time? Are there any dependencies between exceptions an conditions?

Exceptions are used when there are some mistakes , or exceeds the supposed values, we can highligt that in different colours for enabling the validator to notice easily. In this we are giving conditions for considering the value as exceptions. suppose, if the values is out of the range -1 to +1 then exception.
But conditions can be considered as the restrictions given in measure level also. So please elaborate what you meant by conditions

My iphone wonbt charge let it die but now it wont charge and it did the same thing after i restored it

my iphone wonbt charge let it die but now it wont charge and it did the same thing after i restored it

Resetting the Logic Board
Resetting the logic board can resolve many system problems. Whenever you have a
unit that fails to power up, you should follow this procedure
before replacing any modules.
1 Unplug the computer.
2 Press the Power On button on the front of the unit.
3 Open the side access panel.
4 Remove the battery from the logic board.
5 Wait at least 10 minutes before replacing the battery.
6 Make sure the battery is installed in the correct +/-
direction.
7 Reassemble the computer and test the unit.
 Cheers, Tom

When I try to eject my ipod after sync I get the following message:"The iPod cannot be restored because it contains files that are in use by another application.". I tried to restore but it doesn't work and I get the same message

When I try to eject my ipod after sync I get the following message:The iPod cannot be restored because it contains files that are in use by another application.". I tried to restore but it doesn't work and I get the same message

Go to your computer's System Tray and try ejecting. If you can't eject, there is an application that is trying to access your iPod.
Go to http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx and download ProcessExplorer.
Go to http://support.microsoft.com/kb/555665 and follow the instructions under Resolution.
Note that this is a good, general process any time you can't access any file.
In my case an update to RealPlayer installed a program called RecordingManager that was accessing my iPod.

Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

Try following the instructions of tt2 in https://discussions.apple.com/thread/5822086

Can WRT54G use WPA and WEP at the same time?

I used to have a smc 802.11b wireless router and a dlink 802.11b wireless print server.
In order to have WPA and a firewall, I replaced the wireless router with a linksys WRT54G.
Then I realize the dlink print server, even though it has the "g" keyword in the model name, does not do WPA (DP-G321).
Do I have to buy a 802.11g wireless print server? Or is there another solution?
I don't supposed the linksys router can do both WPA and WEP at the same time?
Connecting the print server to the router with a cable is not feasible. They are on different floors.

both of your devices are has a wireless b technology settings, just set a wep encryption on your network rather than wpa because some wireless b devices don;t work with wpa. with regards to your query if wep and wpa can be used at the same time, the answer is no.

My iPod Classic was stolen and returned to me by police but now it "cannot be synced because it cannot be written to or read from". I noticed the thief had changed the format to "windows" but I have restored it and still get the same message.

My iPod Classic was stolen and returned to me by police but now it "cannot be synced because it cannot be written to or read from". I noticed the thief had changed the format to "windows" but I have restored it and still get the same message.

If the media is in the library then yes it is that simple. Connect the device, load it up with your media. The problem is when you try to connect a full device to a new empty library on a new computer when iTunes will offer to replace the content on the device with that in the local library, i.e. nothing! (For anyone in that position see Recover your iTunes library from your iPod or iOS device).
You should be able to add your devices at https://supportprofile.apple.com/ though I'm not sure what happens if the second hand iPod was previously registered.
tt2

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

I want to but can't play WAVs and MP3s in the same folder, please he

Similar Messages

Maybe you are looking for