I want to buy a NEW iPad WiFi and 4G in Miami, but I want to activate the phone company in Guatemala, there is a problem in buying the iPad in the U.S. and activate it in Guatemala?
I want to buy a NEW iPad WiFi and 4G in Miami, but I want to activate with the phone company in Guatemala, there is a problem in buying the iPad in the U.S. and activate it in Guatemala?
What are all the differences between the iPad 3rd Gen models? Which should I buy?
http://everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd-gen -early-2012-models.html
Look at the 4G info.
Cheers, Tom
Similar Messages
-
After updating to ios 5, my calendar sometimes freezes when entering a new event. I have tried syncing but it doesn't fix the problem. Are there any bug fixes for this? Any ideas would be great thanks, I don't really want to have to reset everything!
Try to reset the iPod by pressing the home and sleep button for about 10sec, until the Apple logo comes back again. You will not lose data doing a reset, but it can clear some glitches after installing new software or apps.
-
I'm trying to play this new movie i bought with my macbook but every time i put the movie in it makes a noise and only stays there for 6 seconds then ejects itself how can i fix this problem?
Restart your phone,hold the home button and the off button down till the apple symbol comes up. If that doesnt fix it , you need to do a restore in itunes by connecting to itunes , click on your phones name to the left, then click restore in the center of the screen and restore from backup.
-
I'm trying to extend my wifi network with time capsule but it can't find the existing wifi network
I'm trying to extend my wifi network with time capsule but it can't find the existing BT wifi network even though it is there with a good signal strength. The Time Capsule is connected to a Netgear router via ethernet.
You will need to start over on the setup of the Time Capsule as follows:
Disconnect any Ethernet cables that might be connected to the Time Capsule, but leave it powered on
Hold in the reset button on the back of the Time Capsule for 8-10 seconds and release. The reset button is located next to the AC power socket.
Allow a full minute for the Time Capsule to restart to a slow, blinking amber light
Connect the Ethernet cable from a LAN <--> port on the Netgear to the WAN "O" port on the Time Capsule. The Ethernet cable must remain connected at all times.
Click the WiFi icon at the top of the Mac's screen
Look for a setting of New AirPort Base Station
Click on Time Capsule
The example below shows an AirPort Express. You will see Time Capsule on your screen.
That will get the setup wizard going. It will take a minute to analyze the settings, then display a screen that looks like this, except you will see a picture of the Time Capsule
Network Name..........Type in the exact name that the Netgear wireless is using
Base Station.............Type in a name that you want to call the Time Capsule. Use something short and simple. Mine is TC, for example
Password..................Type in the exact password that the Netgear wireless requires
Verify.........................Verify the Password again
Click Next
The setup wizard will configure everything for you automatically. When you see the message of Setup Complete, click Done.
That's it. Now you have one big "extended" network. Technically, this is called a "roaming" network. -
I have been trying to set a new voicemail greeting on my iphone 4s but every time i check the 'save' button it says voicemail unavaliable, try again later. Really do not know what else to try. Any help would be greatly appreciated! thanks
Voicemail is a Carrier feature... Contact your Carrier...
But first... Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
I am trying to transfer photos, music, etc from my Power Mac G5 to my new iMac. The Power Mac is too old for the migration assistant to help. I have an old Firewire but it does not fit the new iMac. Any suggestions? If a Firewire is the best option which one do I need? Thanks.
You need a Firewire 800 to 400 adapter or cable or a external USB 2/3 drive (self powered) it can default to the old USB the G5 uses 1 or 2.
Format the drive info here.
Backup and restore info
https://discussions.apple.com/message/16276201#16276201 -
I can't get Wifi on my iphone 3g - but I can't back the phone up
Ok, this sounds like a problem that only a complete numpty would have (hands up, that's me).
Here is my issue: I have an old iphone 3G that a friend gave to me - (primarily to use for Wifi as I don't have a computer and I needed to access the internet). For a while (a week) it worked FINE and then all of a sudden my phone will NOT connect to any wifi network. It just brings up a message that says 'cannot connect to this network'.
I have turned the airplane mode on and off
I have restored network settings (several times)
I have turned the divice on and off
and I have checked for new software updates on my friends computer - but apparently we're all good there *(even though the muppet in the apple store was like ' oh, you've got old software we're up to 5 now just update it - given that she couldn't find itunes on an ipad, I'm inclined to think she knows not much more than me).
I know the natural thing would be to reset the phone but I DONT want to lose all my contacts / photos / messages etc.
I don't want to Sync the phone to my friends computer cos it would mess up all her contacts etc. as she syncs her phone to her computer.
I'm a bit stuck.
HELP!?
RAn iPhone 3G can only be updated to iOS 4.2.1...that's the end of the line for that model iPhone. If that's the iOS already on your phone, there are no further updates available.
-
I've completely reformattted and installed Tiger 4.2, and am connected to my WiFi router but Safari informs me that it "failed to open page ...apple.com.startpage/ because it could not connect to the server "www.apple.com"
Network Setup Assistant tells me "Congratulations you are Connected".
When I was formatting the HD, they offered me a registration page and said I could register later, which I choose, now I can't find a registration form anywhere.
I have a 20" G5 PowerMac 8.1, late August 2005, 1.8 GHz; 80GB; 600MHz; SerialNo. WxxxxxxVS9T; 1GB SDRAM
TIA ....goldieThere is no need to register an older Mac - but you should update to the final version of Tiger, 10.4.11.
General advice on updating Tiger:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/kb/DL170
And for Intel Macs here: http://support.apple.com/kb/DL172
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later). -
Splitting a library does not remove the folder I moved from the original library. I exported a folder of 3000 images from the original library to a new library. The new libraryb was created alright, but the folder and the 3000 images remain in the original library. Why? And how do I safely remove them?
The new libraryb was created alright, but the folder and the 3000 images remain in the original library. Why? And how do I safely remove them?
Exporting a library will create a duplicate of the exported library items. Usually you do this to work on a partial library on another computer and later merge the changed images back. Splitting the library is not the primary purpose of exporting.
If you want to remove the library items that you exported, select them in the source list of the library inspector and delete them (File > Delete Original Images and all Versions). Then empty the Aperture Trash, after checking that you did not trash more than you wanted.
But check, if the backup of your Aperture library is in working condition, and check the exported library carefully, before you do such a massive delete.
Regards
Léonie -
How do I get my old iTunes library onto my new laptop? My old laptop is broken but all media is on my phone. Most of the songs are from CD's which I no longer have. HELP!
That is not necessarily true. You are allowed to make a back-up of media you own and, at least in the Netherlands, even a copy of a work you've borrowed from a library. The law expressly permits this and you pay a certain amount for recordable media to allow for home use. See http://www.thuiskopie.nl/nl for this. If you then decide to destroy the media, i.e. do not transfer the media to someone else, I don't see how you infringe copyright by keeping the back-up. But I guess some so-called creatives like the idea of making money in all kinds of hypothetical ways...
It is a nice dream, where you have to work once and then earn a lot of money by selling millions of copies from your work. But buyers can make copies too!! Hahahahahaha! -
We have an iphone 5 but iTunes won't recognize it because we need a newer version (currently 10.6.3). After trying to download newest version of iTunes, it tells us we can't finish the download because we need a newer version of OS X (currently 10.5.8)... there aren't any software updates available so I'm at a loss!
fep516 wrote:
Would you recommend upgrading again to Mountain Lion after the Snow Leopard upgrade?
Yes, Lion and Mountain Lion are a significant upgrade from Snow Leopard, and they fully support iCloud syncing.
First verify that your model number supports Mountain Lion (I'm pretty sure it does), then check how much RAM you have. Your model only comes with 1 GB (https://support.apple.com/kb/sp16), which is inadequate for later versions. Upgrade to 4 GB if you haven't already. The upgrade is a do-it-yourself project that will take 5 minutes if you are at all handy with modern electronics; you just remove the 1 GB DIMM and insert 2 2GB DIMMs. Here's an example of a memory upgrade kit: http://www.amazon.com/Kingston-Modules-Macbook-KTA-MB667K2-4GR/dp/B001265GI2/ref =sr_1_2?ie=UTF8&qid=1362357462&sr=8-2&keywords=imac+memory+2gb.
This is not an endorsement of this vendor or this manufacturer; it is just a reference for the type of memory you need. (Not that there's anything wrong with Amazon or Kingston.) -
When I add a new item to my calendar, it saves, but doesn't show on the calendar.
I can add new items to my calendar and create alerts for them; however, whenever I go to the Calendar app and look for items I have created, they never show up. The only way I know the calendar is actually saving the items is because I get alerts when I have them set for and the items are syncing to my Outlook calendar (so I can see them on Outlook), but if I am looking for items on my phone Calendar app, they don't show. This was not a problem until about a month ago. I have shut down and reset the phone several times since the issue has started, but it is still not resolved.
Howdy squeakyred2,
If I understand correctly you are getting the alerts from the events that you are creating on your Calendar app, but they do not show in the app once they are created. It seems to me that the calendar you are adding them to may not be checked, thereby making it hidden. To check this, first open the Calendars app and tap Calendars at the bottom:
Calendar at a glance - iPhone
Then verify the calendars you have showing. It should look similar to this:
Use multiple calendars - iPhone
Thank you for using Apple Support Communities.
All the very best,
Sterling -
.
Amazing steps you've done so far! The great news is this is very unlikely an issue with your iPhone.
I've run into a similar issue lately as well. I narrowed it down to one song that was causing 30 songs not to sync. I removed the song from the sync list (unchecked it) and all 29 songs were able to sync.
You may be running into a similar issue. This may be a problem with this version of iTunes, an issue with one song or a group of songs; hard to know for sure. It's important to narrow down and isolate the cause. Most imporantly get that music back on there!
The way to narrow down the casue add just a few songs at a time (even 1, just to get that first sync finished). Manually syncing is what you'll need here.
Plug in your iPhone, on the Summary screen (shows a picture of your iPhone, the iOS version, Restore iPhone....; etc). Under the Options area at the bottom choose to Manually Manage Videos and Music then choose Apply in the lower right. The music that's on your iPhone now should be removed from your iPhone now. You're now able to sync music manually.
The link below explains how to drag the songs from the iTunes library on the computer on to your iPhone which will start the sync. Add just one song just to see if you can get 1 of those hundreds of songs on there. If you can, awesome! Keep adding until you find the song or group of songs that are causing this issue.
http://support.apple.com/kb/HT1535
Please let me know how things are going.
Cheers! -
I want to give my old iphone4 to my daughter but it won't let me reset anything without my iCloud password. Unfortunately it did not recognise my password and when I requested to reset it I was taken to Apple ID. I changed the password but my email is not an iCloud one so it still won't recognise it or my original i cloud password. Help!! Apple have been no help at all....
Hey! What way did you try to reset your iphone?
The easiest thing (please correct me if i'm wrong now) is:
settings, general, reset -> reset all ("contents and settings")
You just need the unlock-code for this.
What iOS are you running on that phone?
If this doesn't help, please let us know! -
New MBPro...airport connection established but can not connect to the internet...help! suggestions?
Hi all, trying to set up my MBPro...seems to be connecting to my AirPort Base Station w/out any troubles...but when I try to get online I'm getting a "can't connect to the Internet" message. I checked my network settings, restarted multiple times, etc. No luck. Seems to be a problem with the IP address (I think)...but not sure how to resolve it. I have an iMac and iPhone in the house that are able to connect and get online w/out issues. Any thoughts? TY!!
Are you asking the make/model of the computer or the AX base station?
Neither, I was interested in the make/model of the cable modem.
Our ethernet connection was fried in an electrical storm so we had to go wireless.
Electrical storms are never a good thing when it comes to electronics. What was/is your current network configuration? Is it something like the following?
Cable modem > (Ethernet cable) > AX > (wireless) > wireless devices
Is there another router, other than the AX, in the configuration? ... or an Ethernet switch? I'm just trying to understand your network to best advise you on how to configure the AX.
Maybe you are looking for
-
IPod connected, however, it does not function properly
The iPod I have is the 60gb. I have had problems with my iPod previously since the 2006-3-23 update but fixed it. -Delete all files manually from iPod -Uninstall iTunes, iPod, and all applications associated with the programs within the installation
-
Will the macbook be able to run...
Counter-strike 1.6 The macbook I am getting is the better white one, and I am getting the router and a total of 1 gig ram.
-
Installing Solaris 10 with 19" DELL Flatpanel
Hi! I installed the Solaris 10 (10/06) with an NVidia 6600 GT using a DELL 19" Flatpanel Monitor. The suggested driver didn't work, so I used the NVidia VESA-driver. The reason was, that the monitor displayed only a message that a unsupported resolut
-
Hello! I have an assignment to do. In my dashboard page I have a time prompt with this format (25/06/2011) and I want to do a chart with axis X with all days of month of my prompt. I mean, if user select in page prompt (25/06/2011) I should see in my
-
ITunes wiped out all music and playlists
This is a real problem as many of what I have loaded are teaching lectures and the titles were added at the ITunes level. What is on my hard drive are numbers that have no coorelation to the lecture title.