I want to buy airport express, but i need to know if my sony smart tv can connect with it?, i want to buy airport express, but i need to know if my sony smart tv can connect with it?
i want to buy airport express for my ipad and iphone, but i need to know if my sony smart tv and my sister's phone can connect with it?
It would be difficult to guarentee that all wireless devices can connect to the AirPort Express Base Station (AX), so at best, your Sony Smart TV and your sister's phone SHOULD be able to connect ... as the AX is basically no different than any other manufacturers wireless router.
Similar Messages
-
Hi,
I lost my airport connection when I was using internet and when I wanted to re-reconnect to airport it gave me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?Hello there hastibahreini,
It sounds like you were using your Wi-Fi network from your Airport base station and the connection cut out. You have reset the password on the device but the issue persists. I would try the 3 resets outlined in the following article in order to help resolve the issue. If it persists, is the Wi-Fi connection issue happening on more than one device or computer?
Resetting an AirPort base station FAQ
http://support.apple.com/kb/ht3728
Thank you for using Apple Support Communities.
Cheers,
Sterling -
I bought an Airport Express from a supplier who told me I'd need at least iOS 5.4 on my iPad. My first generation iPad is apparently up to date but the iOS is only 5.1.1. Before I unpack the device I want to know whether it will work with this earlier version.
Apple says that a minimum of iOS 5.0 is required. See the support document below. Look for Requirements on the left hand side of the page about half way down.
Requirements: Compatible with iPhone, iPod touch, and iPad. Requires iOS 5.0 or later.
https://itunes.apple.com/us/app/airport-utility/id427276530?mt=8 -
When I want to make a phonecall with my iphone5, I hear absolutely nothing....no ringing and no talking when connection established. When I make the same call but now on speaker, no problem or what so ever, can anyone help me ?
Hello there, RobenCaatje.
The following Knowledge Base article is specific for the issue you're describing:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Specifically:
Resolution
Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
Make sure the Ring/Silent switch is not switched to silent.
While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
Restart the iPhone.
If restarting the iPhone doesn't resolve the issue, try restoring the device.
If the issue persists, go to the Service Answer Center - iPhone for information on service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
My wi-fi connection is good & i want restore my iphone.But a massage flash after few min-iPhone could not be activated because the activation server is temporarily unavailable." SIM is in searching mode. What i can do.?
You had a jailbreak and unlock.
When you updated you cooked it.
Your phone is done.
Time for a new one. -
I want to upgrade my old airport express to the new express. Can I just switch out the old for the new or must I delete the old network first and start from scratch with the new express?
It is not necessary to delete your old wireless networks first, but doing so may eliminate confusion. If you wish to do that, open System Preferences > Network, and select Wi-Fi from the left column. Click the Advanced... button, then select your old wireless networks and delete them with the "–" (minus) button. Make sure the "Remember networks this computer has joined" remains checked.
OK then Apply.
This prevents your Mac from searching for your previous network which will no longer exist.
A new Express creates an open wireless network that you must select before you can configure it. It appears in your Wi-Fi menu like this:
Select it. AirPort Utility will load and walk you through its configuration.
Edit: If you are really using OS X 10.5.1 as shown in your profile, the above screenshot is not applicable. Instead, select the network called "Apple network nnnnnn" and then launch AirPort Utility. -
My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet. I tried to repair connection, tried to reboot modem several times, I even updated my computer. Nothing. All it says is that it does not detect modem. Why?
Welcome to the support community group.
First, are you sure that your AirPort Extreme has been configured correctly and is properly connected to your modem?
Begin by telling us how you have things connected and if the Airport Extreme is replacing a previously owned router or is this an entirely new installation?
First be sure that your modem is working and properly connects you to the internet using an ethernet cable directly connected to your laptop. Once you're sure that's working, reset the AirPort to factory defaults by disconnecting it from power and pressing and holding in the small reset button on the back for 15 - 20 seconds while you reconnect it to power. Then turn everything off for 5 minutes. Connect the Airport to your modem with and ethernet cable to the Airport WAN port on the back (check the user guide to make sure you connect the cable to the correct port) then connect a second ethernet cable between the laptop and one of the LAN ports on the AirPort Extreme.
Then power up the modem first, wait 5 minutes and then power up the Airport, wait 5 minutes and finally power up your laptop.
Then run the airport configuration utility from your laptop. Since you're not using an Apple computer, be sure that all of your firewall, and virus blocking and checking software is disabled before you run the airport configuration utility. Once you run the utility, it should detect your AirPort and allow you to use the configuration wizard to set things up.
Check back if you're still having problems. -
I want to buy iphone4 8GB, but I am afraid that I buy a fake iphone, not the real iphone. So, what can I do if I want to check for sure it is a real iphone from apple?
Buy it from an Apple Retail Store or Apple Online or through an approved Carrier.
-
My iMac cannot connect to my TP-LINK TD-W8970 router even though all other computers can. I get the message "No configured AirPort base stations have been found" and "No PPPoE configurations were found". Any ideas please?
Open the Network pane in System Preferences. If there's a closed padlock icon in the lower left corner, click it and enter your administrator login password when prompted.
At the bottom of the service list on the left is a popup menu with a gear icon. From that menu, select
Set Service Order...
A sheet will drop down showing all listed services. Drag the one that you want to use to connect to the Internet to the top of the list. Click OK to close the sheet, then close the preference pane and confirm when prompted to save the change. -
just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????
Temporarily connecting your AirPort Express to one of the Time Capsule's Etherent LAN <-> ports...as LaPastenagure suggests....is always a good way to setup and configure other network devices.
If you want to configure the Express using wireless, remember that the Express broadcasts a default wireless signal with a name like Apple Network xxxxxx. You must log on to this network first....no password is required....then open AirPort Utility to "see" the AirPort Express. -
So tonight I updated my 4s over 3g to ios 7.1 it took forever and said connect to itunes. It said it was in recovery mode & needed to be restored but would wipe all content. I have never made a backup because my computers hard drive crashed (luckily the pics were on the phone) and now after updating like apple said I should it wants me to wipe my phone... I can't loose pics of my kids births and birthdays... I tried the holding buttons and letting off to exit recovery mode with no success... I don't know what to do but I swear if apple makes me loose the priceless pics of my kids I will never buy any apple device ever again... and I will make sure no family or friend ever does either... there has to be a way somehow.. some data recovery some program... I dunno if tinyumbrella can exit it for me without hacking or jailbreaking (which I don't dare/want to do) but i need a solution. I have researched this for hours and hours with no solution so far. If I have to pay $$ for it fine I will but after I recover my data that way I will be going to samsung... anyone with a solution would be greatly appreciated... any solution...
that makes no sense... it was only doing an update... if that's the case it should have promted me to back up first if this is even possible... there is a program that says it can recovery anything that hasn't been written over yet.. so would this not work? http://www.iphone-data-recovery.com/iphone-data-recovery.html or would the apple store be able to recover it??? i've done plenty of data recovery on computers... why wouldn't it be possible on an Iphone... does apple seriously not care about thier customers at all??? how about thier employees that are gonna get more than an earful tomorrow when I walk in there store??? No wonder samsung paid 2 million to apple in pennies when they got sued... (how does it feel to be screwed with apple?!)
-
Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!
Thank you for your suggestion but I have already had a couple of phone sessions with NETGEAR support and they don't see any problems with the router settings etc. They referred me to Apple support, who helped me discover that it is possible to communicate with the router but only if I turn off the encryption/security software, which I don't want to do. The frustrating thing is that I can connect wirelessly from a laptop running Windows 7 and two Anroid smart phones, with WPA-2 in place, without a problem. Do you have any other ideas?
-
Hi have just bought a Sony Xperia J and am not able to tether my ipad as I did with my Nokia C3. Why?
What do I have to do to solve the problem so I can tether to my Ipad?
Is this phone another of the things that Apple does not support? How do I know before I buy a phone that it will be supported?How are you attempting to connect them?
Looking at the Experia J features it does seem to support Wifi Hotspot, but there is no mention of a Bluetooth hotspot. Different phones offer different things.
The iPad issues the message, because there doesn;t seem to be anything it can do with it. But this is not something apple is blocking its more a limitation or a non present feature of the phone.
From the Manual which I assume you've read through:
To share your phone’s data connection as a portable Wi-Fi® hotspot
1 From the Home screen, tap .
2 Find and tap Settings > More… > Tethering & portable hotspot.
3 Tap Configure Wi-Fi hotspot.
4 Enter the Network SSID for the network. Tap the Security field to select a
security type.
5 If required, enter a password.
6 Tap Save.
7 Mark the Portable Wi-Fi hotspot checkbox. The phone starts broadcasting its
Wi-Fi® network name (SSID). You can now connect to this network with up to
8 computers or other devices.
8 Unmark the Portable Wi-Fi hotspot checkbox when you want to stop sharing
your data connection via Wi-Fi®
When that is set up, you can use your iPad to look for the Wifi network the phone is providing and connect to it as you would any wifi network.
http://www-support-downloads.sonymobile.com/st26/userguide_EN_ST26_1268-7245.1_A ndroid4.0.pdf
http://blog.clove.co.uk//wp-content/uploads/2012/11/Sony_Xperia_J_ST26_User_Guid e.pdf -
I can't buy or install any apps because it says that I need to fix my billing information but instead I want to use an iTunes card to buy the item I want but it wont let me
If you have a credit card on your account then it has to be a valid card - do you get the 'none' option on your account so that you can remove the card, or is there an error show anywhere on the card payment details screen so that you can correc it ?
As long as you are buying content for yourself and not trying to gift, then your balance should be automatically used for its purchase. -
I recently moved and now I'm trying to set up my Time Capsule as the primary base station or router with an existing network that has a Centurylink modem/router. The TC still has the settings for my old network. I also have backups on it. I have the data backed up to another HD so it's not an issue to return it to factory settings if doing so deletes the back ups. Do I need to restore it to the factory settings to set it up? Also, what settings would I select on the TC (and the Centurylink modem/router) in order for the TC to serve as the router, instead of the Centurylink router? I want to be able to use the TC to back up my Mac's, print wirelessly, and improve overall performance. I tried setting the TC up and ended with 2 different networks. Can anyone please help me with this?
The TC has to plug into the existing modem router by ethernet.. you cannot use wireless.
You have a choice of which is router.. only if Centurylink agree to bridge their modem router.. this has to be done by the ISP and often they do not allow it.
Is your broadband cable or adsl or fibre or ???
If it is cable and you are allowed to purchase your own cable modem pick a pure modem version with no router in it.. plug the TC into it by ethernet.
Setup the TC in DHCP and NAT mode.. (depending on broadband type).
You must reset the TC to factory to do the setup.. no files are lost at all.
Here is my current recommended setup.. with Yosemite life has become harder than ever.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Here is why Yosemite has fundamental issues.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/ -
Setting up Air play with new time capsule and newer airport express?
I just recently purchased a new time capsule, and I'd like to use my current generation airport express to stream music from my apple devices. I just was wondering what I had to do in airport utility to set this up? I was also wondering how to transition the network over from the old express to the new time capsule as far software settings go. I really appreciate the help and assistance. Thanks folks. I'm really looking forward to setting up the network for our new iMac.
Your setup is very easy..
This is how I would do it.
Remove the express from the network.. ie just unplug it but do not change anything in it. Keep the configuration as is until the TC is working.
Power off the cable modem.. this is requirement.. at least 20min is usually needed, dependining on your ISP.
Go into the airport utility and setup the TC as router for your network .. it is a simple setup.. but I would do as stated.. all short names, no spaces pure alphanumeric rather than accept Apple's names. That is for TC and wireless.
After 20min power up the cable modem. Once it is running and you have internet access. you can proceed to setup the express to do the airplay. If the internet still doesn't work, power off the cable modem overnight..
Do not lose that express setup so if you absolutely have to, you can at any time substitute it back and have internet again.
So everything is working properly TC in place as full router.. now hard reset the express.. and simply use the airport utility to put it in extend wireless .. or plug in by ethernet if you are going to hard wire it.
The extend wireless setup is all done straight from the existing setup.
Now you can plug your express audio port into your speaker.. and setup the airplay via the itunes.
I will get Bob to give you his way of doing it.. There is no one RIGHT way .. but he can give you more info if you want a particular method.
Maybe you are looking for
-
Hi all, Need help , i have downloaded the Garmin Xt navigation in my 5800, but every time i go to launch it gives be following option; Purchase and go. begin free trial enter product key connect to a garmin GPS. but i f go for free trial it says coul
-
Ipod Classic Buffer Overload with apple lossless
My 160GB Classic occasionally pauses or stalls for a few seconds much like the buffer is overloaded and is reloading. The pause is intermittent (never the same place in same song), it lasts about 2 seconds then the song resumes right where it left of
-
Ingesting .mts AVCHD files into FCE
Is it possible to ingest avchd (.mts) files using Log and Transfer? Reading from past discussions it seems I need a converter. I used voltaic with my old powermac but I thought with an intelmac I would not need to convert .mts files, besides if I con
-
Re: PeopleSoft returns an ORA-1858 error msg when retrieving a VARCHAR(30) Fld
Have received a similar error - created a view utilizing a dblink - six fields - 4 from dblink and 2 from local database. The view and data is accessible thru PL/SQL Developer with no errors. When attempting to access thru a page/component utilizing
-
Hello, i have a master process chain which contains several sub process chains. The master process chain ist triggered from an event. My question know is: Is it possible to start a sub chain from another event? Greetings Oliver