I want to buy PS but not the Creative Cloud version, how do i do this

I don't want or need Creative Cloud, so how and where do i buy just PS for my MAC

The permanent license versions are sold here: https://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_ creativesuite6.html?start=10
Windows is the default choice, so click on Edit to choose Mac.
Gene

Similar Messages

  • Hi everyone, I have LR 5 that I purchased with a serial number and about a week ago I got the message about a new update, I want to get LR 6 but not the creative cloud, last time from LR4 to LR5 there was just an update without buying the creative cloud,

    Hi everyone, I have LR 5 that I purchased with a serial number and about a week ago I got the message about a new update, I want to get LR 6 but not the creative cloud, last time from LR4 to LR5 there was just an update without buying the creative cloud, is that possible from LR5 to LR6? Thanks so much.

    Welcome to Apple Discussions!
    You can't install 9.2.1 or earlier on any Mac that is only Mac OS X bootable. In fact you need to use the restore disks which came with those Macs to install 9.2.2 on those Macs. 8.6 is only possible to install on Macs which came with 8.6 or earlier. The 9.1 disk may be useful for your 1999 PowerMac G4, but won't be of any use for a 2006 Powerbook G4.
    Adobe Pagemill does not follow w3.org web publishing standards. If you want a webpage editor, get http://www.barebones.com/ BBEdit
    MS Office, there is a free Mac OS X alternative in http://www.neooffice.org/
    Or you can upgrade to the full Office 2004 for the Mac, or get http://www.thinkfree.com/ or Open OS X Office.
    Wordperfect files can be converted to Word files with http://www.dataviz.com/ 's Maclinkplus.
    Microsoft no longer has Internet Explorer for download (that quit being offered January 2006), though that is covered more in my FAQ:
    http://www.macmaps.com/browser.html
    As for other Mac OS X inquiries, I strongly recommend seeing my other FAQ:
    http://www.macmaps.com/macosxnative.html
    which should answer most of your other questions. If you have further questions, please feel free to ask me.
    Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

  • My changes to a duplicated page are not syncing up in the Creative Cloud. How can I fix this?

    I'm using Adobe Proto on an iPad. I created one page and successfully viewed it in the Creative Cloud. Then I duplicated that 1st page so I could work on the next page in that project. I made some changes to the 2nd page and then synced the project with the Creative Cloud again.
    Once I try to view the 2nd page in the Creative Cloud, it's still an exact copy of the 1st page. In other words, my changes on the 2nd page don't show up. I've tried synching the project many times and I get the same result. Tried opening the project from another browser, same result.
    My changes to a duplicated page are not syncing up in the Creative Cloud. How can I fix this?
    Thank you.

    Yes, I'm 99% certain the project is being synced. If I duplicate more than the one page so that I end up with more than 2 pages, I still see every single page that I duplicated and made changes as the initial version of the page.
    I duplicated that 1st page again so that I have 3 pages. I made changes to the 3rd one and I'm still not seeing those changes when I look at the page in Creative Cloud. I see the new, 3rd page, so that should mean the project is being synced, correct?

  • I am based in UK and want to buy an App from the US store. How do I do this?

    Is it possible to buy an app from the US store whilst registered in the UK?

    You cannot.
    You can ONLY use the itunes store of your country of residence ( proven by the issuing country of your credit card and the valid billing address of that card) AND ONLY while you are physically located inside the borders of that country.
    You cannot use other countrys itunes store.

  • I'm using a Mac.  I "upgraded" to LR5 from LR4.  I do not want to be a member of the "Creative Cloud".  I just want to use the software I purchased, specifically to upload to my SmugMug account.  Is there a way to use an add-on to do this?  Aperture and L

    I'm using a Mac.  I "upgraded" to LR5 from LR4.  I do not want to be a member of the "Creative Cloud".  I just want to use the software I purchased, specifically to upload to my SmugMug account.  Is there a way to use an add-on to do this?  Aperture and LR4 were easy but I'm finding it impossible without subscribing to CC.

    Sorry, maybe I don't understand, but why do you feel compelled to subscribe to CC if you already have a permanent Lightroom 5 licence?
    For the SmugMug plugin, a simple Google search ("smugmug lightroom plugin") gives this link to download the plugin:  http://help.smugmug.com/customer/portal/articles/121321
    Another way is to click the button "Find more services online..." in the the Publish Service section of Lightroom, and to search for SmugMug in the Adobe Add-ons portal; you will find a link to the latest plugin: https://creative.adobe.com/addons/products/1755

  • I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message  Exit Code: 7 Please see specific errors below for troubleshoo

    I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message  Exit Code: 7 Please see specific errors below for troubleshooting. For example,  ERROR: DW041 ...   -------------------------------------- Summary --------------------------------------   - 0 fatal error(s), 1 error(s)
    ERROR: DW041: INSTALLDIR Volume D:\ doesn't exist.  -------------------------------------------------------------------------------------  System Requirements  and it will not install, It says cant find the path D: im not sure why because as far as I can see its set to install on drive C: which is where I want it!

    Exit Code: 6, Exit Code: 7 Installation Errors - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs

  • I want to buy lightroom 5 as standalone product. I do not want creative cloud. How can I make this possible?

    I want to buy lightroom 5 as standalone product. I do not want creative cloud. How can I make this possible?

    Thanks YKaan,
    I do not like and do not want to pay monthly, also I do not need Photoshop just want lightroom. I want to know if I can just buy and download Lightroom or if I buy the retail package I can just have the program as standalone product.

  • HT1727 i bought some ringtones on my iPhone, later on i sync my iphone to my old computer now i have a new mac pro desktop and i only have 2 ringtones on my phone but not the rest of them how can i get them back without having to pay for them again?

    i bought some ringtones on my iPhone, later on i sync my iphone to my old computer now i have a new mac pro desktop and i only have 2 ringtones on my phone but not the rest of them how can i get them back without having to pay for them again?

    If you bought them on your iPad then you will need to connect your iPad to your computer's iTunes and do File > Devices > Transfer Purchases to copy them over to the Tones part of your computer's iTunes library and you can then sync them to your iPhone - ringtones are a one-time only download, so you won't be able to redownload them directly on your phone.

  • I have music that is playing within the iTunes program, but not on my iPod. How can I fix this?

    I have music that is playing within the iTunes program, but not on my iPod. How can I fix this?

    Skipping songs
    The iPod seems to fail to play all of the occasional track that iTunes, and indeed other PMPs, are happy to play. There is probably some minor technical error in the internal structure of the file which is normally ignored by other playback software but causes the Classic to bail out.
    If you use Windows you may like to try scanning the files with MP3Validator which can find & fix some internal MP3 errors.
    Some users have also suggested that completely removing all id3 tags and then replacing the information can be a solution. This can be achieved in iTunes by selecting an affected track, right/control clicking and using the option Convert id3 tags> None. Since some files may mistakenly have more than one tag you may need to repeat this action. Once you have confirmed that no tag is present you can replace the tag information using Convert id3 tags > V2.3 (I believe it is recommended to avoid using V2.4).
    Personally I have found files for which these solutions don't work. In this case the workaround is either to re-rip the tracks or get iTunes to re-encode the file, e.g.convert AAC to MP3 or vice versa and sync the newly encoded file to the iPod instead. Because transcoding will cause a loss of fidelity you should keep your original file so that if a future iPod firmware resolves this issue you can put your original files back onto the iPod.
    tt2

  • Client getting an IP lease on the 64-bit LiteTouch boot image, but not the 32-bit version.

    MDT 2012 U1.  No problem with PXE booting so WDS is not the issue.
    The NIC in question is the Intel I217-LM, which resides on both the new Dell Optiplex 9020 and the Latitude E7440.  I downloaded the Dell drivers and then the Intel drivers and imported them into the WindowsPE drivers folder in the workbench.  Updated
    the boot images to make sure the new drivers were injected.  Both yielded the same result.  I can do everything I need to do when booting to the 64-bit LiteTouchPE_x64.wim boot image,  but not the 32-bit version.  When booting to the 32-bit
    version, I get no IP configuration info at all.  
    When looking at the drivers in MDT, I see only one difference:  the supported OS versions.  The 64-bit driver supports 6.1, 6.1.1, and 6.2.  The 32-bit driver supports only 6.1.1 and 6.2.  Not sure if that's the issue.
    Tried using drvload within 32-bit WinPE to manually inject the NIC driver.  Still no luck.  Ipconfig yields no configuration at all.
    If I can't get these machines to boot to the 32-bit boot images, I can't deploy 32-bit images, unless there's a way of which I'm unaware.
    EDIT:  A little extra background.  My WindowsPE folder has two subfolders called x86 and x64.  Obviously, 32-bit drivers go into the x86 folder and 64-bit drivers go into the x64 folder.  Then in the properties of the deployment share a
    selection profile is selected which points to the architecture-specific folders.

    Specifically what do you see when you are in WinPE, press the F8 button, and run ipconfig.
    1. ipconfig shows no network adapters (see:
    http://myitforum.com/cs2/blogs/rpedersen/clip_image002_53DA17D4.jpg ). This means you still have not loaded the correct device drivers, check the c:\windows\system32\wpeinit.log file.
    2. ipconfig shows an "autoconfiguration IPv4 Address" with a netmastk of 255.255.0.0. This means that the client did not get an IP address from the DHCP server. Double check the connection between the client and the DHCP server.
    3. ipconfig shows a correct address. There is no problem. :^)
    Keith Garner - keithga.wordpress.com
    I get the first result.  Absolutely no network adapters, which I assumed indicated no appropriate device driver.
    This is the result of the wpeinit.log from the machine booting to the 32-bit boot image:
    Info      WPEINIT is processing the unattend file [X:\unattend.xml]
    Info      Spent 1747ms initializing removable media before unattend search
    Info      ==== Initializing Display Settings ====
    Info      Setting display resolution 1024x768x32@60: 0x00000000
    Info      STATUS: SUCCESS (0x00000000)
    Info      ==== Initializing Computer Name ====
    Info      Generating a random computer name
    Info      No computer name specified, generating a random name.
    Info      Renaming computer to MININT-TFRU2BT.
    Info      Acquired profiling mutex
    Info      Service winmgmt disable: 0x00000000
    Info      Service winmgmt stop: 0x00000000
    Info      Service winmgmt enable: 0x00000000
    Info      Released profiling mutex
    Info      STATUS: SUCCESS (0x00000000)
    Info      ==== Initializing Virtual Memory Paging File ====
    Info      No WinPE page file setting specified
    Info      STATUS: SUCCESS (0x00000001)
    Info      ==== Initializing Optional Components ====
    Info      WinPE optional component 'Microsoft-WinPE-HTA' is present
    Info      WinPE optional component 'Microsoft-WinPE-MDAC' is present
    Info      WinPE optional component 'Microsoft-WinPE-WMI' is present
    Info      WinPE optional component 'Microsoft-WinPE-WSH' is present
    Info      STATUS: SUCCESS (0x00000000)
    Info      ==== Initializing Network Access and Applying Configuration ====
    Info      No EnableNetwork unattend setting was specified; the default action for this context is to enable networking support.
    Info      Acquired profiling mutex
    Info      Install MS_MSCLIENT: 0x0004a020
    Info      Install MS_NETBIOS: 0x0004a020
    Info      Install MS_SMB: 0x0004a020
    Info      Install MS_TCPIP6: 0x0004a020
    Info      Install MS_TCPIP: 0x0004a020
    Info      Service dhcp start: 0x00000000
    Info      Service lmhosts start: 0x00000000
    Info      Service ikeext start: 0x00000000
    Info      Service mpssvc start: 0x00000000
    Info      Released profiling mutex
    Info      Spent 749ms installing network components
    Info      Spent 1669ms installing network drivers
    Error     QueryAdapterStatus: no adapters found.
    Info      Spent 0ms confirming network initialization; status 0x80004005
    Info      WaitForNetworkToInitialize failed; ignoring error
    Info      STATUS: SUCCESS (0x003d0001)
    Info      ==== Applying Firewall Settings ====
    Info      STATUS: SUCCESS (0x00000001)
    Info      ==== Executing Synchronous User-Provided Commands ====
    Info      Parsing RunSynchronousCommand: 1 entries
    Info        Command 0: 0x00000000
    Info      Successfully executed command 'wscript.exe X:\Deploy\Scripts\LiteTouch.wsf' (exit code 0x00000000)
    Info      STATUS: SUCCESS (0x00000000)
    Info      ==== Executing Asynchronous User-Provided Commands ====
    Info      STATUS: SUCCESS (0x00000001)
    Info      ==== Applying Shutdown Settings ====
    Info      No shutdown setting was specified
    Info      STATUS: SUCCESS (0x00000001)
    At first I thought the first bolded section might be relevant, but when I booted to the x64 boot image, which works fine, I get the same message in its wpeinit.log file.  The only difference between the two log files is that the x64 boot image actually
    shows successful installation of a driver where the second bolded section is.

  • HT3939 i want to buy iphone5 but i will go back Thailand so can i use this in Thailand?

    i want to buy iphone5 but i will go back Thailand so can i use this in Thailand?

    yes,if you buy iPhone 5 without contract with carrier

  • I have 3 email accounts.  My contacts show for the gmail but not the other two.  How do I get those addresses?

    I have three email accounts.  My gmail contacts show on my new ipad , but not the other two.  How can I get these contacts on my ipad?

    The received emails should show in two locations:
    1. In the All Inboxes tab of Mail.
    2. The Inbox for each mail account,
    If your emails are not showing in these locations try quitting the mail app and then reset your iPhone.
    Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal.
    To reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • I purchased Photoshop Element online 1/19/2015 and have AD015439775 number but not the serial number.  How do I get the serial number, please?

    I purchased Photoshop Element online 1/19/2015 and have AD015439775 number but not the serial number.  How do I get the serial number, please?

    Redemption Code Help
    Mylenium

  • TS3988 When i sign on to my icloud via pc it says my apple id is valid but not an icloud account.  How do I fix this

    When i sign on to my icloud via pc the error message says that I have a valid apple id but not valid icloud id. How do I fix this?  It keeps putting me back to dowload screen, but it doesn't work or do anything

    Do you have an iCloud account yet (go to www.icloud.com and login to verify that you do).

  • Is it possible to install the creative suite CS6 full version (not the creative cloud) on imac version 10.10.1?

    is it possible to install the creative suite CS6 full version (not the creative cloud) on imac version 10.10.1?

    System requirements | Adobe Creative Suite 6

Maybe you are looking for