I want to change the infotype 0002 field position(first name & lasname)

Dear Freinds,
I have requirement where i have to change the positions of the first name and last name , as pe standard we will see is
the lastname under that field we will se the first name . As per the user he wanted first name and then last name . I have read in sap help that it says the table T522N is the place. But before using i wanted to can i change or is there any method where i can do.
i have changed the name2 as middle name by going to cmod and changing the text label. Here it dint asked me any access key.
similary for chaning the position of the two fields can i do so please let me know if any body has done this.
regards
divya.

Hi Divya,
You can't change the position of the fields in standard SAP screens - PA30/20.
This would be repair and you need to get access key to change the 2000 screen of module pool MP000200.
T522N is used to change the name format in reports, etc. (Firstname Lastname or Lastname Firstname) It has nothing to do with the field positions in the screen of PA20/30.
Regards,
Dilek

Similar Messages

How do I change the name that shows up for my email account . I don't want to change the email address, just my personal name that shows who the email is from.

Hi There
My apple account was in my partners name , I have now changed it to my name .
The problem is my icloud email still shows up his name at the beginning of my email address. eg Jo Blogg ( [email protected] ) .
When I open up Icloud in browser it shows in the top right my correct name , but when I go into Account settings on Mac in the Mail it shows up my
partners name as the Full Name associated with the account . It doesn't give you the option of changing that name though.
I hope I have explained this properly and someone can help ?
Cheers
Lizzeee

Hey There I didn't need to change it as it shows my correct name in my icloud account. The problem is on my Mac where it still shows my Full name as my partners name.
For eg. if I send an email from "Mail" on mac and I use my icloud account then the name that shows up is my partners name when the email is received. If I send an email from the Icloud Mail box that I log into on my browser then the name that shows up when the email is received is my name which is correct.
When I go into preferences in "Mail" on my Mac to change my name, the name is ghosted out and doesn't allow me to change it ! ? It is here that it still show my partners name ?

TS1702 how do you change the contact app to appear first name last name once it is in another setup mode

how do you change the setup in the contact app to first name, last name once it is in differently

Settings>Mail, Contacts, Calendars>Contacts>Sort Order - First, Last or Last, First .... or Display Order and make the changes that you want.

Changing the Event View Field Display Order on a Calendar

We'd like to change the display of a calendar event to show the Title on top and the time below. This is how it currently looks below. Is there a way to change it?
Orange County District Attorney

Hi,
According to your post, my understanding is that you wanted to change the Event View Field display order on a Calendar.
You need to insert the code below into a Content Editor Web Part.
<script type="text/javascript" src="http://code.jquery.com/jquery-1.10.2.min.js"></script>
<script type="text/javascript">
function changeCalendarOrder() {
$(".ms-acal-sdiv").each(function () {
var arr = $(this).find('div').toArray();
var temp;
temp = arr[0];
arr[0] = arr[2];
arr[2] = temp;
$(this).html(arr);
//alert($(this).html());
_spBodyOnLoadFunctionNames.push('calendarEventLinkIntercept');
// hook into the existing SharePoint calendar load function
function calendarEventLinkIntercept() {
var OldCalendarNotify4a = SP.UI.ApplicationPages.CalendarNotify.$4b;
SP.UI.ApplicationPages.CalendarNotify.$4b = function () {
OldCalendarNotify4a();
changeCalendarOrder();
</script>
The result is as below:
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Change the Accounting document fields cost center and profit center

Dear Experts,
User has posted document with wrong profit center
For that we subjected that he can go to the profit center actual posting T.Code 9ke0 but with that he can only change the Profit center document with that there is no accounting side updating
I have tried with Document Change Rules, Line Item for fields cost center and profit center in that while configuring I did not get any error message,
But in the document I am unable to changing the same fields cost center and profit center
Can any body please guide me to resolve the issue?
Essentially I want to change the Accounting document fields cost center and profit center
Thanks in Advance,
Wiswanath

Hello,
Once the documents are posted in FI module, the system doesn't allow anybody to change the cost objects (cost center, profit center, internal order). The only fields you can change through FB02 transaction are the Line item text (BSEG-SGTXT) and the assignment (BSEG-ZUONR).
If you want to get a change to the cost object to be reflected from FI to CO, you should reverse the FI documents with wrong cost objects and post new documents with correct cost center, profit center.
Hope it helps you.
Cheers,
Daniel.

Facing data type error when changing the order of fields in a query

Hello Experts
I am working on E sourcing 5.1.
I have a query with some filters . I want to change the position of a particular filter.
Basically I want to move a filter of type date to the top , so that it is the 1st parameter.
I was able to do this by reorder option.
However at runtime it gives me an error saying that "error u201CORA-00932: inconsistent datatypes: expected NUMBER got date."
Later I reverted back my changes so that the date filed is at its original position and faced no issues.
Query worked fine.
Is the order of filters important when executing a query.
Please suggest how can I move the date filter to the top of the query's filter list.
Regards
Vikas

Hello Vikas,
Its not the SELECT statements that you need to change. You have to change the WHERE caluse.
In the WHERE clause, some of the conditions will have some table column equated to a '?' symbol. This symbol is a place-holder for a filter prompt. There is a one-to-one correspondence between the '?' symbols and the filter prompts created in the query(under the Filter Prompt tab). This means that the first '?' corresponds to the first filter prompt, second '?' to the second filter prompt and so on.
Keeping the above information in mind, you can attempt to make changes to your query. You can duplicate your existing query and try your hands at it.
One more point worth mentioning : It is evident that if you need to use the same filter prompt at more than once place in the query definition, you have to create more than one instance of that query prompt.(Here by another instance I mean that the two filter prompts should have same values in their fields when you define them.) But even when you create more than one instance of a filter prompt, on the UI it will appear just as a single instance.
If things have become more confusing than before (of which there is a high probability ) then please go through the online help for Queries. It has got an extensive documenation and will be surely be of some help to you.
Good luck!!
Devesh

How can i used pai in screen 1000 to change the select-options field?

hi,all.
I want used pai to change the select-options field,but it can't works.
the mainly code is:
REPORT ZTEST99.
TABLES :MARA,MAKT,MARC.
SELECTION-SCREEN BEGIN OF BLOCK B0 WITH FRAME TITLE TITLE0 .
select-options:s_matnr for mara-matnr,
               s_werks for marc-werks MODIF ID ID1.
SELECTION-SCREEN END OF BLOCK B0.
parameters:p_flag as checkbox.
at selection-screen OUTPUT.
   LOOP AT SCREEN.
   IF P_FLAG = 'X' .
   IF screen-group1 = 'ID1'.
         screen-input = '0'.
    ELSE.
      screen-input = '1'.
    ENDIF.
    MODIFY SCREEN.
ENDIF.
    ENDLOOP.
START-OF-SELECTION.
CALL SCREEN 1000.
when i click p_flag,then i want to change s_werks from OBLIGATORY to no OBLIGATORY.
how can i realized?
Thanks for all.
Sun

Hi ,
change your code like this.
Change in your code:
SELECTION-SCREEN BEGIN OF SCREEN 100.
SELECT-OPTIONS : s_matnr for mara-matnr,
s_werks for marc-werks MODIF ID ID1.
SELECTION-SCREEN END OF SCREEN 100 .
At selection-screen.
if sy-dynnr = '100'.
IF P_FLAG = 'X' .
LOOP AT SCREEN.
IF screen-group1 = 'ID1'.
screen-required = '0'.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
else.
LOOP AT SCREEN.
IF screen-group1 = 'ID1'.
screen-required = 1.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
my code :
REPORT Z50871_SELECTOPS_DYNAMIC.
PARAMETERS : CH_EBELN AS CHECKBOX,
             CH_VBELN AS CHECKBOX.
DATA: V_EBELN TYPE EKKO-EBELN,
      V_VBELN TYPE VBAK-VBELN.
SELECTION-SCREEN BEGIN OF SCREEN 100.
SELECT-OPTIONS : EBELN FOR V_EBELN MODIF ID G1,
                 VBELN FOR V_VBELN MODIF ID G2.
SELECTION-SCREEN END OF SCREEN 100 .
AT SELECTION-SCREEN OUTPUT.
IF SY-DYNNR = 100.
    IF CH_EBELN = 'X' AND
       CH_VBELN = ''.
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 EQ 'G1'.
          SCREEN-ACTIVE = '1'.
        ELSE.
          SCREEN-ACTIVE = '0'.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
    ELSEIF CH_VBELN = 'X' AND
       CH_EBELN = '' .
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 EQ 'G2'.
          SCREEN-ACTIVE = '1'.
        ELSE.
          SCREEN-ACTIVE = '0'.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
    ELSEIF CH_EBELN = 'X' AND CH_VBELN = 'X'.
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 EQ 'G1'
           OR SCREEN-GROUP1 EQ 'G2' .
          SCREEN-ACTIVE = '1'.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
    ENDIF.
ENDIF.
AT SELECTION-SCREEN.
IF SY-DYNNR = 1000.
IF CH_EBELN = 'X' OR CH_VBELN = 'X'.
    CALL SELECTION-SCREEN 100.
ELSE.
    MESSAGE I000(Z50871MSG) WITH 'Please select atleast one checkbox'.
ENDIF.
ENDIF.
regards
Sandeep Reddy

I want to change the selection text in the standard report/transaction .

I have added one screen field to the standard report , now i want to change the selection text in the standard report/transaction

Hi,
>
scoy123 wrote:
> I have added one screen field to the standard report , now i want to change the selection text in the standard report/transaction
Refer:-
CONSTANTS : c_comment(20) TYPE c VALUE 'write your comment'.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) c_comment.
PARAMETERS : p_matnr TYPE matnr.
SELECTION-SCREEN END OF LINE.
Hope this helps you.
Regards,
Tarun

Change the infotype Data in 586

Hi All,
I want to change the data in 586 infotype. Currently i am using the FM, But i am not able to change the data.
    CALL FUNCTION 'HR_INFOTYPE_OPERATION'
      EXPORTING
        infty         = '0586'
        number        = '0000111'
        validityend   = it_pa0586-endda
        validitybegin = it_pa0586-begda
        record        = ls_p0586
        operation     = 'MOD'
        tclas         = 'A'
      IMPORTING
        return        = return.
Where In operation INS,DEL are working MOD is not working.
Please let me nknow any other way also,
Thanks in Advance.

Ramesh,
Yeah thats is common practice in any organization in the infotype 0586 itself we have both columns which we need maintain proposed as well as Actual
This values you can change at any point of time during the financial year bcoz the system reads this infotype for all the periods every time when we execute the payroll driver for April to March
As the top of the screen you will find one selection option consider actual if you tick it the system will consider actual uptown that time system consider proposed
To select the actual filed to all employee you can do by using the standard report
PC00_M40_S80 - Batch program for Section 80
PC00_M40_S88 - Batch program for Section 88
Hope it is clear now
Regards
Rajeshk

I want to change the question order in my form, using TAB

Hi,
I'm trying to build a form in Adobe livecycle designer and I want to change the order of questions: I want users to press TAB to switch question, but I have 2 columns and pressing Tab always brings me from left to right, then second line, I want second line until the end of the column and then change to right.....
Example of what is the situation now:
Header 1
Header 2
Question 1
Question 2
Question 3
Question 4
Question 5
Question 6
Question 7
Question 8
Example of what I want:
Header 1
Header 2
Question 1
Question 5
Question 2
Question 6
Question 3
Question 7
Question 4
Question 8
Thanks for you help!

Hi WWRACHELB,
Try using custom order of fields in 'TAB Order' (window--> Tab Order) if that solves your problem.
Regards,
Ratnesh

Change the customer master fields

Hi all,
I am looking for a BAPI or USER-EXIT to change the customer master fields KNA1-STCD3, BRAN1, BRAN2, BRAN3, BRAN4, BRAN5. If anybody knows please share.
Thanks in advance,
Pranav

Hi Pranav,
If you want to change these fields while saving the trasaction XD02, use user exit: Enhancement- SAPMF02D and exit: EXIT_SAPMF02D_001 or BADI: CUSTOMER_ADD_DATA.
Reddy

MM 335 "You want to change the profit center...'

Hi guys,
in a material master I have the field profit center blank and I want enter a value but the message MM 335 '"You want to change the profit center but material stock still exists"...I have implemented OSS notes for release 6.03 but the message continues to go out..the stock for the Plant in which I want enter Profit center does not exist, is it correct that this message goes out?In your opinion which is the correct way to update material master?I have tried to transfer all stock present in all Plants on which that material is opned with mov type 309 but the message go out again..It is a strange thing , I don' think taht the unique way is to chenge the nature of message from E to W..
thanks in advance for your attention
Bye

Stock may be there still under Plant Stock and Storage Location stock, in previous period.
TO make it Zero do the following things
If previous period stocks exist, you can make a withdrawal posting as follows:
1. Post the same amount to current period stock (for example, using movement type 561) so that previous period stock and current period stock are identical.
2. Make a withdrawal posting in the previous period for the stock together with posting date (for example, using movement type 562).
Hope the steps will help to resolve the problem.

Want to change the name of the tab

Hi All,
I want to add a new tab at Header level for sales transaction using transaction EEWB. However it will always have the name as 'Customer fields'. I want to change the name of the tab in SAP GUI not in PCUI.
Thanks for your help,
Regards,
Smruti

Hi,
Use the badi "MB_MIGO_BADI". See the sample code & BADI documentation for reference.
Regards
Vinod

Want to change the currency in PR generated thro PS .

Dear experts ,
I want to change the currency of the PR generated through PS module . But the currncy field in PR in PS system is greyed out & has default value of INR .
Pls tell me how to do it ??
regards
Anis

Hi,
I hope u have created the PR with network you cannot chage the currecy type.
Moreover in the PR currecy ype is depend on the WBS created for the project if . you have consider INR in
WBS - cost then it will automatically fetch INR for the same

Want to change the BSEG-SGTXT while process through the transaction:FF_5

Hi,
I want to change the value in BSEG-SGTXT during the process through the transaction:FF_5.
Can any one suggest any BADI or User Exit to update the SGTXT.
Regards,
Hema T

Hi
If your text is going to remain content based certain transaction types or text in the note to payee field then you can use the below functionality.
Advantage no ABAP help required.
Define Search String :
Strg Name : Text
Strng : Test (say if you want to find the word "test" in the incoming record. You refer the help doc on Search string for combinations)
Mapping : (keep it blank)
In Search string use :
1)
Company code :
House bank id:
Account id:
Int algthm : (if you are using any)
Strg name: Check
Target field: BDC Field name1 BSEG-SGTXT
2)
Company code :
House bank id:
Account id:
Int algthm : (if you are using any)
Strg name: Text
Target field: BDC Field value1 "text that you want to enter in the Bseg- sgtxt field"
3)
Company code :
House bank id:
Account id:
Int algthm : (if you are using any)
Strg name: Check
Target field: BDC Acct type1 0
0: First line, posting area 1
1: First line, posting area 2
2: Second line, posting area 1
3: Second line, posting area 2
Regards
Nikhil

I want to change the infotype 0002 field position(first name & lasname)

Similar Messages

Maybe you are looking for