I want to change the state of the account

I want to change the state of the account to Saudi Arabia
But there is a problem is the presence of 34 cents in my account, I can not delete
I want you to delete the remaining money in my account
So I change my country to Saudi Arabia
Thank you
saleh alamri

We are fellow users here on these forums, you're not talking to iTunes Support. You can try contacting iTunes support via this page and ask them if they can remove the balance so that you can change countries : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Similar Messages

Some, but not all, podcasts existing on the iPod no longer appear in iTunes. Different podcasts have been affected at different times, after changes in the state of the iPod. Only podcasts are affected.

I have not seen this precise issue addressed anywhere. I don’t know if it’s an iTunes or an iPod problem:
- Some, but not all, podcasts existing on the iPod no longer appear in iTunes;
this, after normal behavior for more than a year since purchase of the iPod.
- Different podcasts have been affected at different times, after changes in the state of the iPod.
- Only podcasts are affected.
- This concerns an iPod nano 6th gen. and iTunes 11.0.2 (26) on System 10.6.8
- The only change to iTunes, the Mac, or the iPod is that just before this condition began
I’d begun syncing an iPhone via iTunes.
I sync manually (“manually manage music and videos”). The first time this happened, I wanted to delete seventeen podcast episodes (all belonging to one podcast) existing on the iPod — but they didn’t show up in iTunes. I tried re-downloading them and re-syncing, to see if the new versions would somehow “re-link” to iTunes. They didn’t. Only one — new — episode appeared in iTunes.
I ultimately reset the iPod and manually resynced all the podcasts I currently had on iTunes. That worked, though I had to painstakingly add in all the other content deleted by the reset.
So: after that reset and manual sync, all podcasts and episodes on the iPod were visible to iTunes and I was able to delete the podcast and its — now 18 — episodes I’d wanted to get rid of to begin with. But the next time I connected the iPod, only 8 podcast episodes out of 21 episodes total existing on the iPod were visible to iTunes. These are different podcasts; I’d deleted the original “invisible” ones.
By “visible,” I mean in the “Podcasts” list view under “[name]’s iPod” in the iTunes sidebar. If I select “[name]’s” iPod in the iTunes sidebar and the “Podcasts” tab, all podcasts and episodes are visible, though greyed out because I’m set to sync manually. It’s unclear to me if these are the podcasts on the iPod or those currently in iTunes, as they are currently the same. If I switch to syncing automatically, all content on the iPod will be lost again, so I’m not up to trying it at the moment.
As I said, this involves only podcasts. All other content on the iPod does appear in iTunes.

I have the same problem- i see my movies in the ipod section in itunes and they even show as mpeg4 in the 'kind' section but they dont have that small TV icon next to them. if i play these in itunes, they play fine- but try playing them on the ipod and all you hear is the sound and no picture. All videos that i manually transfer work fine in the beginning- its when i hook up the ipod to the comp again and start itunes- they start showing up without the 'tv' icon!! i have to again transfer them from the itunes library to activate them as videos.
Need Help!!!

How do I change the states of the "Submit" button in adobe muse?

How do I change the states of the "Submit" button in adobe muse? Currently I can only change the color, text and stroke of the button, but I cannot customize it as I have the other buttons in the tool.

I want to replace the button with an image, however it does not permit me to paste an image into the button, nor does it allow me to delete the box that is currently there. The best I can do is paste the image into the text box that is provided.

HT4059 I downloaded iBooks Author in Italy so the interface is in Italian. I want to change to English for the entire interface?

I downloaded iBooks Author in Italy so the interface is in Italian. I want to change to English for the entire interface?

You would have to re download iBooks Author from the U.S. App Store. Launch the App Store then click the round flag icon bottom right side of the window. Select United States
The issue with this is that your billing credentials (regardless of whether or not it's a free or paid app) must be associated with the same country where you reside. So you may not be able to re download iBooks Author in English.
Post your topic in the iBooks Author community here.
More iBooks Author users can offer feedback that way and may know of a work around.
This is the, "iTunes Store" community for help with iOS devices.

How to save the state of the changed visible layers in pdf, pre-designed in Indesign

Hi,
I have made an Indesign (CS 5.5) file with some textfields (no button), and interactive buttons. And saved it as Interactive PDF.
I have made a fillable form out of the textfields in Adobe Acrobat Pro X, and the interactive buttons are working in PDF.
When you open the PDF in Acrobat Reader or Pro, fill in text and change a state of the button and save the file: all the changes (text and state) are saved.
When you open the PDF in Acrobat Reader or Pro, fill in text and save the file: the changes (text) are saved.
When you open the PDF in Acrobat Reader or Pro, and only change a state of the button and save the file: the changes are NOT saved.
What I mean with states of a button: SHOW/HIDE or ON/OFF etc.
Does anyone know what I'm doing wrong. Or is it not possible to only save changes in states of a button?
Thanks in advance for thinking with me.
Josiane

You would have to check your color management and things like overprint settings or the ink levels of the color components. Streaking is usually a sign of areas getting oversaturated and the automatic adjustments in the printer driver being unable to compensate. and then of course other factors may figure in like banding inherent in using gradients across large areas, out of gamut issues for certain colors and what have you. You'd have to be much more specific about all of that for anyone to even begin to advise specifically...
Mylenium

Set up Signal Express to log when there is a change in state of the inputs (NI USB-6501 logger)

Hello NI Forum, I have recently purchased digital I/O logger NI USB-6501. This arrived with Signal Express, which I intend to use as a Lite version. I just wondered if it was possible to set up Signal Express to only add a log entry when there is a change in state of the inputs? I have this working on a 0.1sec sample period and can interrogate the logs after recording. Most of the time nothing will be happenning, I just wondered if there was a way to reduce the ammount of data captured? Cheers.

Ah that unfortunate, and yes start/stop conditions for loging are part of the Full version of SignalExpress
Here's the comparision: http://www.ni.com/labview/signalexpress/purchasing-options.htm
Sorry about that

I want to change my password but the system is not sending me message to reset my password. pls help someone is using my password without my permission and i want to change my password.

i want to change my password but the system is not sending me message to reset my password. pls help someone is using my password without my permission and i want to change my password.

If you are talking about your Apple ID password, make sure it IS your apple ID.
In the past 24 hours, I have received two emails "How to reset your Apple ID password". I had not requested any change and I finally realized someone else is trying to reset the password. I have had this Apple ID since 2009 so I am not using someone else's ID.
Again, if you are not receiving the email to reset make sure you have the right ID - it might be going to the email linked to the account, and it might not be yours.

HT201363 I want to change security question but the problem is i don't know the rescue email what can i do ?

I want to change security question but the problem is i don't know the rescue email what can i do ?
Please answer me quickly

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a valid rescue email address, then use this procedure:
         Rescue email address and how to reset Apple ID security questions.
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                         Apple ID- All about Apple ID security questions.

I want to change my answer to the question

At the expense of buying Apple Store
I want to change my answer to the question
Forgot your previous answer
thnk you;

Alternatives for Help Resetting Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Customer Service: Contacting Apple for support in your
          country and ask to speak to Account Security.
Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
How to Manage your Apple ID: Manage My Apple ID

Does performing a DAQmx Clear Task on a PCI-4474 card change the state of the IEPE current?

Does performing a DAQmx Clear Task on a PCI-4474
card change the state
of the IEPE current? If the IEPE current was on, does it remain
on even though the task as been cleared? If the IEPE current
remains on, then I assume I don't have to wait for the IEPE current to
settle if I make a new Task and start a new measurement--is this
correct?
Thank you in advance for your help.
Ken

DAQmx Clear Task should not turn off IEPE current. You will have to explicity set IEPE current to On (for that channel) whenever you use any of the AI channels on your 4474 in order to keep the IEPE On because the IEPE for all channels in the AI subsystem will be set to the default state (Off) unless explicitly configured. That said, if you clear a task that had IEPE On, and then initialize a new task and set IEPE On, the IEPE will be uninterrupted and there should be no need to wait for the IEPE to settle. Other components of your measurement system might need time to settle if their state was changed between tasks (DUT, sensor, AC coupling, etc.)
Doug
NI Sound and Vibration

How can I change the state in the shipment info in the account setting?

How can I change the state in the shipment info in the account setting?
I was trying to buy an Apple TV from the store but, I live in Italy and at the moment (for long time) I'm in Deutschland.
From the shipment information i didn't find the possibility to change the state. From default is ITALY but I need to receive in Deutschland.
Did somebody know how to???
Thanks in advance!!!

Hi 7oaksGaz,
1) Due to tax reasons, it's not possible to change the country associated with an existing Adobe ID.
Follow the steps mentioned in the below link as a workaround to create an Adobe ID with the email address you currently use for the existing Adobe ID.
http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
2) You can change the language of the application from AAM preferences
Please find the link below for the article with the steps
http://helpx.adobe.com/creative-cloud/kb/creative-cloud-trial-mode.html
Thanks!
Eshant

How would you change the state to the base state?

How would you change the state to the base state? Its not
letting me do something like:
currentState='<Base State>';

Sorry about the vagueness of that last reply :)
What I have done now in my code is this:
viewstack1.addChildAt(loginCanvas,0);
toggle.selectedIndex = 0;
However nothing happens at this line of code:
toggle.selectedIndex = 0;
but this works:
toggle.selectedIndex = 1; or ...
toggle.selectedIndex = 2;
toggle.selectedIndex = 3;
toggle.selectedIndex = 4;
toggle.selectedIndex = 5;
toggle.selectedIndex = 6;
The strange thing is that if I have a button on the screen:
<mx:Button x="10" y="3" label="Button"
click="toggle.selectedIndex =0"/>
and the user clicks it the toggle.selectedIndex = 0; works.
I'm stumped, any ideas?

E Alternative I have locked and I want to change and jealousy, but the mail that has not been added recently activated I want a solution

E Alternative I have locked and I want to change and jealousy, but the mail that has not been added recently activated I want a solution

What?????
No clue what you're talking about. Repost in your native language.

I want to change serial number in the Batch report and in the special UUT report

I use Batch Model, sequential mode.
I want to change serial number in the Batch report and I want to change UUT serial number in each TestSocket report.
I overrided ModifyReportHeader, I did
Parameters.UUT.SerialNumber = "....."
but the serial number changed only in the Batch Report, not in UUT Report. How can I change serial number in UUT Report too?

Marta,
There is actually a ModifyBatchReportHeader in addition to the ModifyReportHeader that you already used. That would be the first thing to do.
After that, I think I need a more detailed description of what you are trying to do (perhaps with screenshots) in order to be able to help effectively.
Josh W. | National Instruments | Applications Engineering
Josh W.
Certified TestStand Architect
Formerly blue

HT1918 I have 0.31 $ balance in my account and I want to change my country of my account. how can I put the credit balance to 0?

I have 0.31 $ balance in my account and I want to change my country of my account. how can I put the credit balance to 0?

Click here and request assistance.
(71876)

I want to change the state of the account

Similar Messages

Maybe you are looking for