I want to configure the hardware

I'm going to purchase an iMac 27" i7. I want to change the VGA card into the better one such as ATI Radeon HD 4870 or Geforce GTX,... but I can't configure this information in this web.
Please tell me how can I do that. Thank you!!!

The top graphics option for the current iMacs is the +ATI Radeon HD 4850+. On the quad-core iMacs, it comes as the standard choice. These are special video cards that are designed specifically for use in these iMac models. You cannot "configure" to use just any video card on the market.

Similar Messages

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?

Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

HT201250 I am having trouble setting up my time capsule. the amber light is flashing. i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function. I just want the Time Capsule to ba

I am having trouble setting up my time capsule. the amber light is flashing. i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function. I just want the Time Capsule to back up.

Simple.. bridge the TC.. in the apple utility in the NAT and DHCP area.
Plug it into the FIOS router.. you can turn off wireless in the TC if you want.. or use it.. it can work faster if you are nearby and can select 5ghz.. but up to you.

Urgently I want to configure the knowledge search

Hello All
I am working on CRM 5.0 IC WebClient.
I want to configure the knowledge search, I want to know if the knowledge data base is a separate data base should be integrated with CRM or it is already there only need to be configured.
I want to know how data will be saved on this database.
Installing TREX is a must so I want to know if it is installed or not
If any documentation is available please mail me at [email protected]
Regards
Jacopo François

Hi Jacopo,
Please surf through this link.
http://help.sap.com/saphelp_crm40/helpdata/en/83/1668ce7f3411d6885d00008658acb2/content.htm
Regarding Trex installation, you may get the guide in service market place under CRM.
Best Regards,
Pratik Patel
<b>Reward with points!</b>

I want to configure the 7330 motion controller without using MAX

I am new to labview and I have a project where I have to configure the 7330 motion controller without using MAX. What do I need to do to get started doing so?
Thanks for the help!
nw2labview

Hi,
There are several VI's that are included with the motion driver for configuring your controller. They are located on the function pallete under Vision and Motion>>Ni-Motion>>Axis Configuration. Using these VI's you will be able to configure your axis. But why don't you want to use MAX? If you are new to LabVIEW I would suggest configuring and testing your motor in MAX first before you start programing. Once you have it working there you may want to look at several of the examples such as Simple One-Axis Move.vi. I hope this helps.
GG

Don't want to test the hardware

I am trying to build a Snow Leopard image that will boot all current Macs. Apple made this much more difficult by recently releasing updates specific to only the new iMac and Mac Mini. I thought I could just build two new images with those specific updates until 10.6.5 is released and everything is updated again. When I try to install a update it tests the hardware and tells me I can't install this update on this hardware, I build all my images on the newest Mac Pro I have.
The question is how do you modify the package installer so it doesn't read the hardware on install. I see on the web where people mention that they have done it but not how they did it. Any help would be much appreciated.

Try using Pacifist to install those updates manually. Alternatively, some packages allow you to control-click them, choose Show Package Contents, find, and then edit InstallationCheck or the installer scripts with a tool such as TextWrangler.
(53812)

*configure the Picking list(PL) output type,a smart form for PL.

Hello SIR,
I want to configure the Picking list(PL) output type,a smart form for PL but there should be an output type to print*.
i have assign the out type to shipping point in t.code ovlt .i have created picking list in t.code nact. i created sales order and delivery. i have check my picking list in ovl2n change mode picking out put is available in extra-picking output. i have checked my picking out put for smart form in systems-service-output control if i execute it show like no data to list. no spool request number has generated there.
so were i have to check picking list preview for smart form . is spool request number is necessary.plz help me to view preview of picking list.or plz say the steps to configure this to preview.
thanks,
agilarasan

Hi,
Go to Nace .The application for Goods Issues is
ME - Inventory Management -> select and click on output types ->select wa03 output type and click on processing routines here you can find the form name and the driver program name.So while printing select wa03 as the output type.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Regards,
Harini.S
Edited by: Alvaro Tejada Galindo on Dec 23, 2008 3:46 PM

How to configure the proxyserver in solaris10

hi everyone
Anyone can solve this problem, i want to configure the proxy server in solaris 10. any knows please send the reply.
regards
eshwar reddy.k

If you read the forum link I provided carefully, it gives you all the different places you need to make changes including for Scheduler, Publisher etc.
To quote:
BI_Creation
Posted: Feb 7, 2012 11:57 AM in response to: user13304656
Hey guys, I'd like to update this thread. It did helped me, but I had to go a little bit further.
I was facing several database connection issues after moving OBIEE repository database schemas to another database. I could not restart any of OBIEE Scheduler and RTD services.
So, I've tried both Bees and JV suggestions. They both worked great!
But, in my case, I still got the same error for OracleRTD when trying to start it from the Enterprise Manager Webpage. So I could notice that we have two other options in the Console webpage:
EPMSystemRegistry and rtd_datasource.
So, we should take the tips below:
*"Bee" -->*
Login Weblogic Console with admin username/pwd.
Goto Services -> JDBC -> Data Sources.
Select Lock & Edit button
Select Data Source "bip_datasource" link in the available Data Sources list
Select Connection Pool tab
*.... Change the URL|Driver|Properties|Password*
Select Save button.
Do the same to the Data Source "mds-owsm"
And we repeat the same procedure forEPMSystemRegistry and rtd_datasource.
Also, don't forget JV's tip:
*"JV" -->*
*...You have to go to WEblogic Enterprise Manager (http://<server>:7001/em/. Then go to Business Intelligence folder -> coreapplication. Go to "Deployment" tab and then to "Scheduler" tab. Change the database field to point to the new DB and apply changes.*
It worked for me, hope it works for everyone!
Thanks guys!
Please mark if helpful/correct

Configure the stamp ,Digital signature and water mark in DMS

Hi...
I want to configure the stamp ,Digital signature and water mark in for my client in DMS.
Stamp:detaiils showing doc type, doc status,who has open, doc no,version,date and time
Digital Sign:with respect to approval (system should ask user name and password while approvig)
Water mark:for the status (Draft/approved)
Can anybody guide me to do this?Please explan in details as i am doing it first time.
In addition to do this what addition system requirement is needed?
Regards,
Sandip

Hi Sandip,
Please refer below links for required details
For Redlining Redlining
Watermark DMS Seal system watermarking solution
Hope this will answer your query.
Regards,
Deepak Kori

How to configure the XI and PLM in discovery box

How to configure the XI (SLD, Integration repository, Integration Builder ) in SAP discovery system.
And also i want to configure the PLM and xRPM within R/3 of discovery box.
Regards,
Nilesh Damle

Hi Frank,
well, first of all, your application provides log configuration information using an XML file at deployment time. This file is called log-configuration.xml (you can see the DTD description here: http://help.sap.com/saphelp_nw04/helpdata/en/48/ef8748caed894bb4b3ae953a60c592/frameset.htm). There you can set configure log controllers, which could be two types: location and category. So, you can specify your location and severity there. This is described here: http://help.sap.com/saphelp_nw04/helpdata/en/35/671c0136b4714c9e1b16b68211287b/frameset.htm.
Then, after the application is deployed, the log configurations you provided for it are registered with the Log Configuration tool I mentioned about. Using this tool you can later on modify your configurations at runtime (for example, change the severity level) without having to redeploy the application.
I hope it's clearer now? I guess it was me not getting your first question correctly that caused your confusion.
Greetings,
Ivo

How to configure the gmail.

Hello,
I want to configure the gmail app in blackberry. Can anyone suggest me for this.
About Phone: Blackberry 9500 v5.0.0.841

Hello,
To use the proprietary BB services (including Push email capability, BBM, etc.), you must have an adequate data plan from your carrier. The carriers host BIS (BlackBerry Internet Service) for their BB users. Typically, BIS is not available via generic data plans. Many carriers call what is necessary The Blackberry Data Plan. Whatever they call it, it is the carrier who delivers BIS to their BB users -- contact them for assistance. Once you have a Push-email enabled BIS-capable data plan on your BB (at whatever fees your carrier will charge, btw), your BB-proprietary services will function (e.g., you will have Personal/Internet Email added to the email setup wizard, your BBM will function, etc).
With hundreds of carriers in the world, each with dozens of different data plans, it's impossible to tell you specifically what any service plan might actually provide. Only the carriers can answer that question. The best thing to do is to decide what services you desire, and then talk to your carrier about obtaining (from them) a data plan that enables what you desire.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error in configure the Help

Hello Everybody,
   i have install the ECC 6.0, Now i want to configure the SAP Help using SR13 so please suggest
step by step procedure. I have tried as follows
T.code   : SR13
On HtmlHelpfile tab :
    Variant      SAPHELP
    Platform     WN32
    Area          IWBHELP
    Path            D:\SAPHelp\ECC6\ECC6 Help - Setup\English\HtmlHelp\HTMLHELP\HELP
    Language     EN
    Default        (Selected)
But it rises the error Like that
could not find file "d:\SAPHelp\ECC6\ECC6 Help -setup\English\HTmlHelp\HTML\HELP\e18e5134\1a06084d\e1000000\9b38f83b\frameset.chm
So please suggest me How to solve the same
Thanks

Hi!
Thanks for reply.
Till i am not able to solve the same.
i cant understand what is this error massage
"could not find file "d:\SAPHelp\ECC6\ECC6 Help -setup\English\HTmlHelp\HTML\HELP\e18e5134\1a06084d\e1000000\9b38f83b\frameset.chm"
becuase the path i have given
D:\SAPHelp\ECC6\ECC6 Help - Setup\English\HtmlHelp\HTMLHELP\HELP
in that path contains only only .chm files
Also error message display that check SAPDOCCD.LOG file. when i check the Log file, the contain as follows
Program path =     C:\Program Files\SAP\FrontEnd\sapgui\HTMLHELP\SHH.EXE
SHH version =     7.1.0.5
Command line =     "TYPE=5&SERVER=&PATH=D:\SAPHelp\ECC6\ESetup\English\HtmlHelp\HTMLHELP\HELPDATA\EN\EN&SYSTEM=RIS&_CLASS=IWB_STRUCT&_LOIO=&_SLOIO=e18e51341a06084de10000009b38f83b&LANGUAGE=EN&RELEASE=700&IWB_COUNTRY=&IWB_INDUSTRY=&_SCLASS=IWB_STRUCT&FRAME=X"
Info:          --- Default settings from command line ---
Info:          HelpType=HtmlHelpFile
Info:          HtmlHelpFilePath=D:\SAPHelp\ECC6\ESetup\English\HtmlHelp\HTMLHELP\HELPDATA\EN\EN
Info:          --- Contents of profile "C:/WINDOWS/sapdoccd.ini" ---
Info:          Could not read profile "C:/WINDOWS/sapdoccd.ini"
Info:          --- Contents of profile "C:/Program Files/SAP/FrontEnd/sapgui/sapdoccd.ini" ---
Info:          Could not read profile "C:/Program Files/SAP/FrontEnd/sapgui/sapdoccd.ini"
Info:          --- Contents of profile "C:/Program Files/SAP/FrontEnd/sapdoccd.ini" ---
Info:          Could not read profile "C:/Program Files/SAP/FrontEnd/sapdoccd.ini"
Warning:     Could not read any profile
Info:          --- Starting HtmlHelp ---
Info:          CHM file="D:\SAPHelp\ECC6\ESetup\English\HtmlHelp\HTMLHELP\HELPDATA\EN\EN\e18e5134\1a06084d\e1000000\9b38f83b\frameset.chm"
Info:          HTM file=""
Error:          Could not find file "D:\SAPHelp\ECC6\ESetup\English\HtmlHelp\HTMLHELP\HELPDATA\EN\EN\e18e5134\1a06084d\e1000000\9b38f83b\frameset.chm"
So please suggest me How to solve the same.
Thanks

Want to configure wpa2 enterprise in wlc 2106

Hi,
I want to configure the wlc 2106 with wpa2 enterprise .... i reckon that iI need ACS server ( Radius Server ) with server certificate as well client certificate.
how do i configure the redius server to get access through wpa2 enterprise .. If i am wrong , what are all things required to enable wpa2 enterprise with AES encryption .
Is it possible to get the evalution copy of acs server with certificate ?
how to go ahead for the same .
It would be great help me to get the proper answer for configuration of wpa2 enterprise with AES ...

The below link may help you..
http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a008095382f.shtml
Regards
Surendra

Configure the Retry Mechanism of PI

Hi All,
As per my knowledge, if the receiver system is down in the landscape then PI retries for 3 tiimes in a gap of 5 min each and then gives a SystemError message.
I want to know that can I configure this setting?
I have an IDoc to HTTP scenario and I want to configure the number of times the retry should happen before error message.
Also is it possible that whenever the receiver system comes up, the messages be resent to it automatically?
regards,
Piyush Mathur

Hi Piyush,
You can change the default retry interval value from 3 to any.
Goto Communication Channel monitoring> Select the Communication channel>Below you will find Setting Tab>Click on Overwrite button of MaximumNumber> Then change the default value.
Check the link suggested by Shabarish....
>>>Also is it possible that whenever the receiver system comes up, the messages be resent to it automatically?
Yes, in between the retry interval if the receiver system in Up then the files will be automatically processed to the receiver system.
Thanks,

I need help configuring the Airport express from a PC

Hi there!
I want to configure the airport express from a PC. It runs okay but the connection is open (anyone can browse on my connection)
In a PDF that I found on Apples web site, it says go to
Start-> All programs-> Airport express setup assistant, but there are no programs named Airport on my PC!
Do I have to download a utility for this purpose?
Fredrik

If all you want to do is add wireless security to an already configured Express, you'll probably want to use the Airport Admin Utility. You should be able to install it by installing this package:
http://www.apple.com/support/downloads/airport42forwindows.html
If the PC isn't running at least Windows XP, I think you're out of luck.

I want to configure the hardware

Similar Messages

Maybe you are looking for