I want to connect an Airport Express via WiFi to my internet connection and then connect its LAN port to the WAN port of a Time Capsule. Will then any device connected to the time capsule wirelessly be also connected to the internet?

Background is I can't hook up my time capsule directly to my internet connection via network cable. I tried to extend the network via Wifi, but that did not work. At the moment I have two wireless networks, one with internet connection and another one with my time capsule. So to use time machine I have to change my network all the time.
Can I buy an Airport Express, use is as a client to my internet connection wifi and provide that connection via network cable to my time capsule and all it's wifi clients?

The AirPort Express will connect to your existing wireless network if the network is using WPA2 Personal or WPA/WPA2 Personal wireless security settings.
So, it can join the network as a client and then provide an Ethernet signal to your Time Capsule.
Be sure to configure the Time Capsule to operate in Bridge Mode so that it will be operating on the same network.

Similar Messages

Question re AEBS Connected to Airport Express via Ethernet

If I have an AEBS that is being used to extend the range of my wireless network, if I connect an Airport Express via Ethernet to this AEBS for purposes of itunes airtunes will this work and will the wireless network remain wireless-n?

Yes, it will.
You also have the option of (a) completely turning off the radio on the Airport Express or (b) leaving it on, and using it to create a b/g point of access to your LAN thus allowing you to run the AEBSn in n-only mode for your n-capable wireless clients.

Connecting Two Airport Express Via Ethernet

I have a unique situation in which I would like to connect two airport express via ethernet. Here is the situation: I can connect the first AX directly to the internet and set up a WDS for the second AX. Unfortunately, the second AX signal does not reach where I need it to go. I can run an ethernet cable between the two. Is this setting valid for a WDS? Or does the WDS have to be wireless? If I can set up the WDS using an ethernet, will the relay AX broadcast the internet wirelessly then?
Are there any specific settings I should know about?
Any help would be great.
Thanks in advance,
Debbie

I currently have an old snow basestation at this location. Can I plug an ethernet cable into it and connect it to the AX?
Yes that will work.
My understanding was that the older basestation could not do this?
I think you have it confused with extending a network wirelessly. That is not possible with the snow AirPort base station (ABS).

Connecting to Airport Express via Ethernet Cable

Dear Apple Support Community,
My setup at home is such that all my devices are in such close proximity to the Airport Express, and therefore I connect everything to the Airport Express via ethernet cables (NAS, Apple TV, PS 3).
The final step in my network setup would be to connect my Macbook to the Airport Express to connect to the internet using the Ethernet Cables, instead of using the wireless connection - because my Macbook is positioned right next to the Airport Express.
However, I am struggling to get the Macbook to connect to the Internet via the Ethernet Cable through the airport express. Is there a special way to set this up if this can be done. I know Wireless would be the answer, but the problem is, when I download movies etc, I write the files directly onto the NAS which happens a lot quicker than doing so via WiFi.
I hope the above question makes sense.
Thanks in advance for any feedback.
Regards
ST

Hello Brian Hunt1. Welcome to the Apple Discussions!
I have an old PowerBook G3 and I do not have a wireless card for it. My plan was to connect it, via Ethernet cable to my airport express which is on my home wireless network (DSL to Mac Mini to AirPort Express via built-in AirPort).
Unfortunately, the network configuration your describing, where you would use OS X's Internet Sharing feature to share the Mac Mini's wired Internet connection wirelessly with the AirPort Express Base Station (AX), won't work.
If I cannot connect my laptop this way, could anyone suggest a wireless card that is compatible with this slightly antiquated, yet very useful machine?
Only the "Pismo" PowerBook G3 is capable of using the original AirPort card. If you have this model, then the following DIY instructions will show you how to install it.
If this isn't your model, then check out the following vendor offerings:
o QuickerTek
o hField Technologies' Wi-Fire

Can't get itunes to connect to airport express via air tunes

Hi,
I just bought and installed an airport express (for windows 7) everything is now connected but i can't get itunes to recognize my airport express via air tunes. I can see the multiple speakers in itunes, but when i click on it to connect to airport it just comes up with connecting, loads for about a minute then minimizes without connecting.
Has anyone else experienced this? How can i get this to work?
Message was edited by: Toddy85

You've probaby solved this by now, but if not... When upgrading itunes on a Vista or Windows 7 machine with Windows Firewall running for some reason Bonjour can't get through the firewall and thus Airplay does not work. Not good when all your Hi-fi's are connected via airport express!
I found to resolve the issue you have to install an older version of Bonjour. It won't work if you try to do this straight from Apple. So try this...
1. Firstly install and older version of itunes from the web (say version 10.1) Try www.oldapps.com
2. Then find the Bonjour file in program files
3. Cut and paste it to your desktop with its contents
4. Uninstall itunes and Bonjour via your control panel (the desktop file of Bonjour you moved will still be there).
5. Install your new version of itunes, say version 10.5, from the apple website.
6. Before opening it go to program files and cut the (newly installed) Bonjour file and paste it somewhere different to the desktop (you can't just delete it). It does not matter where you won't be needing it.
7. Now Cut and paste the old version of Bonjour you stuck on the desktop in Program files in place of the one you just moved.
8. Hey presto, Airplay, Windows firewall and your Airport Express' should all get on again.
Hope this works...
Jim

Connecting to Airport Express via Linksys Wireless-G adapter

I am trying to use a linksys compact adapter (WUSB600N) to connect a Windows XP PC to my Airport Express- The linksys monitor CAN detect the Airport Express, but "cannot associate with the access point" for a few seconds, then "can associate... but cannot find the Internet"
I haven't had any problems connecting my MBP and a Vista notebook to my AX, just this PC using this adapter.
Can anyone help me?

To Connect your Computer to the Wireless Network you need to change some settings on your Router...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbors network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Now see if you can locate your Wireless Network and attempt to connect...

Airport utility won't see Airport Express via wifi thru time capsul

I have an Imac that is connected to a time capsule 802.11n which is connected to a DSL modem. My time capsule died last night and fortunately it was covered under warranty, so I now have a new time capsule. My network is up and running and the wifi signal is strong. That is great except when I set the time capsule up it did not recognize my airport express. So I re-installed the software from the a.express disc and everything loaded correctly. I plugged my aexpress in and the light cycles through the initial green then to solid amber then to flashing amber. I have gone into airport utilities and can't find the aexpress. I have the a.express in the same room as my time capsule. What can I do to get these two devices to start talking to one another?

The trick was connecting my axpress directly to the Imac via ethernet. From that point on everything went smoothly. No need to reply to this one.

Linking Airtunes to speakers connected to Airport Express via wireless net

G'day
I run a Windows 7 as my main home system. It hosts my large iTunes library which I am trying to share across audio systems in the house.
I run an AppleTV off my main audio system, this is linked wirelessly through my primary modem router (which happens to be a d-link. This gives me the same audio in the office and the lounge room.
I want to add in the hi-fi in the bedroom and have recently bought an Airport Express to achieve this.
I can't seem to work out how to link the Airport Express to the wi-fi network to achieve this sharing.
Can I do this? Or do I need to add either another Airport Express off the main modem router or the main PC which hosts my iTunes library?
I've searched high and low for answers to this online and have come up with zero. Any tips or guidance would be greatly appreciated
Cheers
JW

Thanks Colin21 - much appreciated
In the end I connected another Mac to it and set it up that way.
I had assumed that I could configure it wirelessly - but it seems I just had to cable connect to it in the first instance and then leave it to run wirelessly after that
Cheers and thanks again

Airport Express via WiFi Won't Display Other (wired) Devices

I'm new here, but I did my best to peruse the board before posting this question! Unfortunately, I didn't see a resolution, so I'm hoping one of you might have some suggestions.
Right now, my office has a wired router. One of the ethernet connections is to an (older) Airport Express. We have no problem connecting any MBPs via WiFi, however none of the networked PCs - connected via Ethernet to the router - or networked printers are appearing for the MBPs. The two MBPs display for each other, though, and the networked PCs show up to each other, as well.
What can I do to make the PCs available to the WiFi-connected MBPs? Thanks so much

Check to make sure that the AirPort Express is configured to operate in Bridge Mode, so that it will be on the same subnet as the router.
If you make any changes to the Express, you will need to power off both the network router and the Express, restart the network router first, and then the AirPort Express.

How can I print from my IPAD3 to a printer connected to Airport Express?

How can I print from my IPAD3 to a printer connected to Airport Express? I have a HP printer and I can print from all my Windows PC and iMAC in the house. How can I print from my IPaD?

You cannot.
The USB port on the AirPort Express allow sharing a printer with Windows and Mac OS X, not with iOS:
"Wireless printing over USB requires a compatible printer and OS X v10.2.7 or later, Windows XP, Windows Vista, or Windows 7":
http://www.apple.com/airportexpress/#wireless-printing
"AirPrint-enabled printers connected using Bluetooth or shared through a USB port of a Mac, PC, AirPort Base Station, or Time Capsule are not supported":
http://support.apple.com/kb/ht4356
The HP ePrint app also does not provide such functionality:
Can I print from the HP ePrint mobile app using USB or Bluetooth?
No. You can only print directly to supported HP printers on a local wireless network.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01923321&lc=en&cc=us&dlc=en &product=5199463#N1176
Shlomi

Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
could you tell me how best to set airport express up to extend my wifi range?

Greetings,
This is called an "Extended wireless network".
Read this article for details and steps on how to extend your TimeCapsule's network:
http://support.apple.com/kb/HT4259
Cheers.

I need to connect an Airport Express to an exisitng Wi-Fi Netgear Router. 1) My PC do not detect the Airport Express, 2) AE is flashing amber all the time... Please if someone can help?

I need to connect an Airport Express to an exisitng Wi-Fi Netgear Router. 1) My PC do not detect the Airport Express, 2) AE is flashing amber all the time... Please if someone can help?

Before I bought it I did the same question at the Apple Store, and they told me "You can extend your existing Wi-Fi Signal with Airport Express wireless...
You cannot extend wireless from any brand except another apple router.. the store might have assumed you were using an apple main router. Most people who buy express buy them to extend an extreme or time capsule.
You are correct .. in the setup documents it does say 5.6.1 is adequate to do the setup.. my bad.. !!

Just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

Temporarily connecting your AirPort Express to one of the Time Capsule's Etherent LAN <-> ports...as LaPastenagure suggests....is always a good way to setup and configure other network devices.
If you want to configure the Express using wireless, remember that the Express broadcasts a default wireless signal with a name like Apple Network xxxxxx. You must log on to this network first....no password is required....then open AirPort Utility to "see" the AirPort Express.

Recently moved and installed ATT DLS - I use their wireless router and connectted my airport express - Now I'm getting the Blue ? on some images

Recently moved and installed ATT DLS - I use their wireless router and connectted my airport express - Now I'm getting the Blue ? on some images - and at times - videos don't load. I've increased / deleted Cache. Suggestions? Misconfig? Could it be possible my configuration from MacBook to router isn't correct?
Thanks!

JG,
Thanks for the info.
Couple of questions. I found an apple support document on this topic that opened with this line:
"AirPort Express and all AirPort Extreme base stations can use WDS. Earlier AirPort base stations can't."
If the TC is an airport extreme base station, why can't this work to extend the network? I think I misunderstand. Here is the full article:
http://support.apple.com/kb/HT2044?viewlocale=en_US
If I buy a new airport extreme, set it to wireless-n only as my main router, am I correct that my existing time capsule could be used as a bridge if plugged in upstairs?
Final question (and that should do it), could I take this old airport express, plug it in upstairs using the ethernet connection, and just create a separate wireless network to use with a different name?
I'd like to keep one network if possible but just kicking around short term solutions.
Thanks again.

Trying to connect my wired PC to the wireless airport express via the wireless router.

Trying to connect my wired PC to the wireless airport express via the wireless router. TP-link wired/wireless router. Ultimate goal is to send music from iTunes on PC to wireless router, then to airport, then to reciever. The amber light is blinking. Thanks in advance for the help!

If I'm understanding right your need and your computer has wired access to your network/router, all you have to do is give your AX wireless or wired access to your network too.
Wired should be easier. Just use a network cable to connect to the router. Power up the AX and look for it on AirPort Utility, do so without changing any of your computer settings. If it's visible, then on iTunes your AX should be visible on the AirPlay icon at the bottom-right corner.
If you want to connect your AX to your router wirelessly I would suggest to reset your AX settings by pressing and holding for a few secs the reset button next to all the ports. Once it is reset, using your computer try to look for the wireless network it'll be creating, it should be something like Apple Network 4341eb. Join that network and, using the AirPort Utility, configure your AX as a network client. Go to Wireless > Wireless Mode: Join a wireless network.
Select your router wireless network from the drop-down menu, select the appropriate security and type in your password. Click update.
It'll restart and automatically join your network. Have your computer join back your router network and, again, in iTunes bottom right you should be able to see the AX speakers.
Let me know if this worked.
Jorge...

I want to connect an Airport Express via WiFi to my internet connection and then connect its LAN port to the WAN port of a Time Capsule. Will then any device connected to the time capsule wirelessly be also connected to the internet?

Similar Messages

Maybe you are looking for