I want to connect to a network printer hp cp1518ni with different versions of windows (win7& winxp)

I want to connect to a network printer hp cp1518ni with different versions of windows (win7 & winxp) . My pc with win 7 work ok but the pc with win xp not "see" the printer on the network. What is the additional driver should I install?
thanks
This question was solved.
View Solution.

Hi @OHIMATAS,
I see by your post that you are unable to network the printer to the Windows XP computer, but the Windows 7 computer is connected. I can help you with this.
Make sure the Windows XP computer is connected to the correct network name, not a Guest network either.
Print a configuration page to get the printer's IP address.
Printing a Configuration Page.
Try and access the printer's Embedded Web Server on the Windows XP computer.
Type the IP address into your web browser's address bar. (Internet Explorer)
Did it load the webpage?
If you can't access the printer's EWS, then check the IP address on the computer to see if the first 3 sets of numbers match the printer's IP. They have to match to be on the same network.
Go to start, type run in the search box, type in cmd, then type ipconfig.
Check the IPV4 address.
Now check the IPV4 address for the printer.
Do the first 3 sets of numbers match?
Try and ping the printer.
In the same window, type ping printers IP address (space between ping and IP address)
What are the results?
Run the add printer wizard through printers and faxes, if you were able to access the printer's EWS.
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

Connect to a network printer for air print, after disconnect from the wifi iphone keep pop up a message saying the printer is offline. How do I disable this annoying message?

Connect to a network printer for air print, after disconnect from the wifi iphone keep pop up a message saying the printer is offline. How do I disable this annoying message?

Hey ronniefai,
Thanks for the question. I understand you are receiving a prompt that your printer is offline. This may be due to a printing job that is currently in the queue. Are you able to see the print summary when following these steps?:
Viewing the Print Summary
You can view the Print Summary by double-tapping the Home button and swiping to the right to reveal Printer Center. Then tap Print Center.
Note: Print Center is available only while printing is in progress.
via AirPrint Basics
http://support.apple.com/kb/HT4356
If so, see if you can cancel the job. If not, what happens when you re-connect to the network that the printer is on?
Thanks,
Matt M.

How do I set up a network printer an an in-OS driver in Windows 7 32 bit?

How do I set up a network printer an an in-OS driver in Windows 7 32 bit?

What printer? What router?
Get the latest software for your printer from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I have to keep turning on an off the wi-fi connection to connect to my network after system shutdown with mountain lion, I did not have to do this with 10.6.8 before I upgraded, is there a bug fix in the works?

I have to keep turning on an off the wi-fi connection to connect to my network after system shutdown with mountain lion, I did not have to do this with 10.6.8 before I upgraded, is there a bug fix in the works?

Many have posted this fix:
Go to System Preferences > Energy Saver > Computer Sleep ... set to anything greater than the 15 min. default setting.

Any fix for the PC based network printer communication issue with Mavericks?

Any fix for the PC based network printer communication issue with Mavericks?

I just signed up for FIOS and am not experiencing your problem (had enough other ones instead).
Go to mail preferences ~ click on a mail account ~ click on the advanced tab. The only settings that worked for me were: port 110 SSL OFF, authentication: Authenticated POP (APOP). If I remember correctly when I first set this up another window opened and I typed in my password and never had to do that again.
Hope this helps.

TS1717 Error comes up in iTunes on check for updates "The iTunes update server could not be contacted. Please check your internet connection, or try again later." Currently connected to the internet, on HP Laptop running latest version of Windows 7.

Error comes up in iTunes on check for updates "The iTunes update server could not be contacted. Please check your internet connection, or try again later." Currently connected to the internet, on HP Laptop running latest version of Windows 7.
I get the same problem running the diagnostics. Says network connections are present and in the green, but unable to connect to iTunes Store.

I downloaded the Microsoft Autoruns package and ran it. There are no programs in the LSA Providers tab, and Apple's Bonjour is the only program in the Winsock Providers tab. I also did the "netsh winsock reset" and rebooted. It didn't fix the problem. Any more ideas?

Printing multiple PR with different line items in smartform

Hello all,
I have an requirement to print multiple PR with different line items on different pages.
So,suppose two PR are there,PR1 and PR2 with n no of line items,then i should get each PR on different page with its line items.
Note: One loop processing is already there on line items.
Best Regards,
Anurodh

Hi,
Fetch all the PRs and its corresponding items into 2 different table. Then Loop at the internal whihc contains the PRs and call the 2nd internal table for its items and call the FM for smartforms and pass them.
LOOP AT it_PR.
fetch all the items into it_PR_item
Call Function Fnam
Passign the it_PR_item
ENDLOOP.
Regards,
Aditya

"Please connect iPhone to a computer running a 32-bit version of Windows XP

Anyone! Please, anyone! I just got an iPhone and plugged it in to my existing iTunes and it required for me to update to a new version of iTunes in which I did, which is now 7.4.3.1. When I plug the iPhone in, an error message displays and it says "Please connect iPhone to a conputer running a 32-bit version of Windows XP (SP2) or Windows Vista. I have a Windows Vista and re-checked compatability it everything is fine. I've even re-installed iTunes,and restarted my computer but no success! I still keep getting the same error message. Oh, by the way, I've tried all USB ports as well. =(

It isn't compatible with the 64 bit version of vista. If you search the threads you might find some workarounds that might work. I believe the installer doesn't put the files in the correct directory.
Good luck...

Connecting to a network printer?

My work only provides support for Windows and I want to figure out how to connect my Mac Pro to the network so I can print from it to the designated network printer. It is already connected to the network for Internet, though it does not seem to print when I try. How can I set it up to print to the networked printer?
Thanks!

The browser icon is in the toolbar of Printer Setup Utility. When you "Add" the printer you will have to select a printer driver from the drop down menu unless one is selected automatically.
There are no built-in drivers for Dell printers. Drivers are provided in OS X for a variety of printer manufacturers and models, but Dell does not make printers. Either Dell may provide a driver for Macs (unlikely) or you will need to find out what the real make and model of the printer is in order to get the correct printer driver.
You will have to talk with your System Admin to determine if the printer is installed as an IP printer and find out its IP address. Your System Admin may also be able to help you with the installation on your computer.
You can also use the PSU Help from the PSU's Help menu for more assistance on installing a printer.

How do I connect an ethernet network printer?

I'm trying to connect to an ethernet printer (Xerox WorkCentre 7428) on my LAN using a new Airport Extreme. I've tried connecting the ethernet cable via a switch, and also connecting directly into the ethernet ports on the Airport with no success.

From Xerox's manual for that printer:
To see the IP address of the printer, press the Machine Status button on the printer control panel. The IP address is displayed on the left of the touch screen.
More from Xerox's support site:
Solution : Configure the Printer to Automatically Obtain an IP Address (From a DHCP Server) From the Control Panel
Login as the System Administrator or Key Operator. See the Related Items below for additional information.
Press the [Machine Status) button on the control panel. The Machine Status tab will be displayed on the Touch Screen.
Select the [Tools] tab.
Select the [System Settings] button.
Select the [Connectivity and Network Settings] option from the Group section.
Select the [Protocol Settings] option from the Features section.
Select [IPv4- IP address Resolution], and then select the [Change Settings] button.
Select [DHCP], and then select the [Save] button.
Select the [Close] button.
Press the [Log In / Out] button on the Control Panel. A "Do you want to reboot the machine now for settings to take effect?" message will be displayed.
Select the [Reboot Now] button on the Touch Screen.
Assigning the printer a static IP address (that is, one not assigned using DCHP) consistent with your AirPort Extreme's addressing scheme is preferable for printers. Instructions describing that very fundamental task are annoyingly absent from its manual though. At Step 8 in the above, see if there is an option for a static IP address. Specify one as I described earlier.

Can't Connect to My Network Printer Anymore: Brother 7065-DN

I bought my Macbook Pro in 2010 and never had a problem connecting to my home network printer until a few months ago. Ever since I upgraded from Snow Leopard to Mountain Lion 10.8.5 I can't see or access the network printer. My daughter, who bought her Macbook Pro at the beginning of the year, pre installed with Mountain Lion, has no issues seeing and printing to the printer. I tried reinstalling the driver from my disk and it wouldn't take. I tried downloading the Brother driver from Apple and the specific driver's and updates for my printer, nothing. When I am lucky enough to see it on the printer list, it won't print, saying that the printer cannot be located. I have tried (when it does see it, which is random and weird) using the IP address and then the driver from the list, I also tried using the post script general. I have tried adding the IP address of the printer in the printer set up, I have tried adding the MAC address, I've tried clicking it when it occasionally shows up under my work group. I tried installing it while it was connected directly to the laptop...Nothing....I've turned on printer sharing, file sharing, and anything else I can think of...I am at a loss!
The two Windows PC and the other Macbook in the house can connect via the network, no problem. I even tried to look at her settings to see what was different but I couldn't figure it out. What is really frustrating is that I am working on my degree and need to print regularly, so everyone else in the house has to stop what they are doing, open the file I sent them through e-mail, download it, and then print it. It irritates them and me!
I have a standard router n/b/g and a comcast modem. One desk top and three laptops connected to it. Internet access works fine. Printer is a Laser Jet all in one scanner/printer Brother 7065-DN. I have downloaded all the updated drivers from Apple and Brother. Someone please help!! I am going crazy and wasting a lot of time messing with this that could be better spent on my homework!! Like I said, it worked fine until the upgrade!!

meastley wrote:
I have exactly the same question only my upgrade was to 10.9.1 Mavericks.
Your post here is different from the original topic of discussion. You posted in the ML forums & you are using Mavericks.
It's generally better to start your own Topic, rather than adding onto an existing one ="Threadjacking."
Please start a new topic in the Mavericks forum about your issue so it can receive more focused attention.

Officejet 6600 All But One Laptop Can Connect To Wireless Network Printer

One windows and 2 macs can connect to the wireless printer over the newtwork just fine but one (Windows 7) will not. HP Print and Scan Doctor can discover the printer from that laptop as "visible" but repeatedly says " need to install full software" which I've done, and after, it runs install wizzard reports, the IP address I've entered is wrong, which it's not. Firewalls are off. I've un and re installed, tried windows add device which can't connect either. I've had this problem before with this laptop but just can't remember how I fixed it. I remember getting to a screen that offered the option of installing over a nework or wireless directly to the printer and over the network fixed it, but I can't remember how I got there. Any ideas as I'm at wits end. Thanks

Welcome to the forums @Davidchicago ,
I read through your post about the installation troubles you are having with one of your Windows 7 computers and your Officejet 6600. I am here to let you know what my suggestion is for you!
There could be a program blocking the installation and causing the problem. I'd recommend a Clean Boot, restarting your PC, disabling your firewall and running through the installation again.
Hopefully that will get you through the install. Let me know the results!
Have a great weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Connecting usb to networked printer

Officejet Pro Plus 8600, Win 7 HP
Printer works very well networked. How can I connect a USB cable to use the USB port without the printer defaulting to USB connection?

HP printers support simultaneously USB connection and a network connection. The printer should function on the wireless network without affecting the USB connection.
Is there a problem doing this?
Do you get any error messages?
Is the printer being connected to the same computer with a USB and wireless connection? If so, the computer determines which connection is default. What operating system does the computer use?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

MBPr 15 2013 with 10.9.4 can't connect to a network printer

One of my users is having an issue connecting to our network printers (Ricoh 5502a) at the office with a MBP retina 15" on 10.9.4 with the latest printer drivers etc. installed. She is set up on one printer that we set up a while ago and it prints no problems. However she moves around the office a lot and needs to be able to print to other printers. When we try to add another one of the printers it finds the printer with the IP, it auto-detected the driver, then when I click next, I get an error stating there was an "error connecting to the printer would you continue anyway?" I would try to continue and it states it is connected to the printer and it seems fine. We try to print but the queue just continuously pauses and nothing gets sent to the printer. This issue is only happening with her system every other mac user on our network has no issue adding the printer including me. Please help!

thlatz wrote:
When we try to add another one of the printers it finds the printer with the IP, it auto-detected the driver, then when I click next, I get an error stating there was an "error connecting to the printer would you continue anyway?"
We try to print but the queue just continuously pauses and nothing gets sent to the printer.
This could be a result of the protocol you selected. IPP is the default listed. If you remove this printer and add again, but this time change the protocol drop menu to HP Jetdirect-Socket, see if this works better for the user.

Can't connect to a networked printer - Airlink101 USB Print Server

I am new to Mac. I am trying to connect my iMac to a Brother HL-5040 laser printer through an Airlink101 USB print server over my wireless network. The iMac connected to the 802.11g network immediately without any issues which is more than I can say for the other XP machines I own. I have several other Windows PC's networked and they all print just fine. Using the print setup utility, I can find the networked print server and add it to the printer list; however, I can not print. The status monitor indicates that it can't connect. The install directions on the Airlink101 website for the Mac does not seem to match the options that are part of the "add a printer" utilility. Any help would be appreciated.

thlatz wrote:
When we try to add another one of the printers it finds the printer with the IP, it auto-detected the driver, then when I click next, I get an error stating there was an "error connecting to the printer would you continue anyway?"
We try to print but the queue just continuously pauses and nothing gets sent to the printer.
This could be a result of the protocol you selected. IPP is the default listed. If you remove this printer and add again, but this time change the protocol drop menu to HP Jetdirect-Socket, see if this works better for the user.

I want to connect to a network printer hp cp1518ni with different versions of windows (win7& winxp)

Similar Messages

Maybe you are looking for