I want to convert labview 4.2 to labview 2010
hello, I need immediately help..
I have examples. they created by Labview 4.2. I'm using Labview 2010. How can I open that examples?
Hello,
You have a dedicated thread where you can put your VIs and ask for conversion:
http://forums.ni.com/t5/LabVIEW/Upconvert-VI-Requests/td-p/1067230
Most of the VIs can be converted to version 8.2.1 and then from 8.2.1 to more recent versions.
Regards
Florian Abry
Application Engineer Group Leader
NI Germany
Similar Messages
-
I want to convert my source code in Labview 5.1 to labview 2011
HI
I want to convert a labview program which is in labview 5.1 to labview 2011 version
i am not able to open the program in the 5.1 version.
if there is no way to convert it ,then can you tell me if 5.1 version is avialable online that is compatible with the windows7 .?
thanks
Attachments:
plant.vi 31 KB
PID.vi 104 KB
integration3.vi 18 KBPost your request in this Version conversion Board
The best solution is the one you find it by yourself -
I am trying to generate an application that saves a copy of its front panel on completion. This is easy to do using an invoke node with Print VI to HTML but this does not work in an .exe format. I have seen elsewhere that you have to use the Get Panel Image method, but no details are supplied in LV 5.0.1 documentation of how to use the "image" data (1-D Unsigned Byte array) that is generated. I want to save this in a format that can then be read as a bitmap in any standard graphics package. Any assistance?
Hi,
If you'd upgrade to LV5.1 or 6 you could use the 'standard' vi's for this.
You need a VI called "Write BMP File.vi". It's not shipped with LV5.0.1.
This vi only uses 3 subVI's, so perhaps someone at NI can convert it and
send it to you (sorry, I won't, it's copywrited).
If you cannot get this VI anywhere, you'll need to figure out the BMP file
format yourself. It's not too complicated, but still could take some days.
Perhaps someone figured it out before LV5.1 was released.
Regards,
Wiebe.
"RDK" wrote in message
news:[email protected]..
> I want to use Get Panel Image in Labview 5.0.1 and need details on how
> to save the BMP data generated
>
> I am trying to generate an application that saves a copy
of its front
> panel on completion. This is easy to do using an invoke node with
> Print VI to HTML but this does not work in an .exe format. I have seen
> elsewhere that you have to use the Get Panel Image method, but no
> details are supplied in LV 5.0.1 documentation of how to use the
> "image" data (1-D Unsigned Byte array) that is generated. I want to
> save this in a format that can then be read as a bitmap in any
> standard graphics package. Any assistance? -
Problem in converting a simulink model in LabVIEW 2010
hello,
I have developed a Simulink model in MATLAB which I want to convert into equivalent LabVIEW VI's. The simulink model is as attached. The problem here is:-
LabVIEW is not able to convert all the mechanical blocks named Ankle revolute joint, Body , joint actuator and joint sensor into equivalent LabVIEW VI.
Is it possible to convert those blocks into equivalent LabVIEW VI's?
PS:- I am using LabVIEW 2010.
Attachments:
AAFO.PNG 19 KBHi Susheel,
RFC module interface parameters (import, export , tables) can only refer to data dictionary types. Hence if you currently have one of the parameters referring to a type defined in your function group main include or in a type pool, you need to create a SE11 data dictionary structure/ table type for that and then change the data type reference.
Cheers,
Aditya -
I downloaded the adobe XI software and it shows in my Adobe download assistant as downloaded but I can not open it and it is not a part of my applications. Very frustrating download process as I just want to convert a PDF file to an editable word document...
Odonnells52 you will still need to install Adobe Acrobat Professional prior to being able to make edits to PDF or utilize Acrobat. By default the installation files have been saved to your download folder.
If you continue to face difficulties with the Adobe Download Assistant then please see Troubleshoot Adobe Download Assistant.
You can also download the installation files directly from Download Acrobat products | Standard, Pro | XI, X if you are unable to locate the downloaded installation files. -
Hi want to convert a number in crore, e.g. 10000000 to 1.00 Can anybody help on this?
Hi All,
I want to convert a number in crore format.
My basic problem is, I am using a custome format:
#,##0.00,,,%;
Here main task is done by ,,,%.
Each comma (,) is dividing a number by 1000. Thus three commas are dividing a number by 10^9 digits.
But I need number in crore (i.e. 10^7), Thus we have used this percent sign (%).
Here I can get required Value but appended percent (%) to it. I can temporary hide this using wrap text.
But I need exact solution to convert a number in crore.
Can anybody help me regarding the same.Hi Neha,
You can use EPMScaleData function, in that give scaling factor as per your requirement.
For more details you can go through following link
How to use EPMScaleData in a fully dynamic report
Regards,
Shrikant -
How do I change my birthdate that was entered in on my Adobe App. I want to convert images to pdf
How do I change my birthdate that was entered in on my Adobe App. I want to convert images to pdf
What Adobe app?
-
I have 2? How do I sync selected photos from my IPad to my IMac w/o losing all photos on my IPad which will be replaced with the photos on my IMac.You see I have two IMacs with different sets of photos. Also want to convert all Apple works docs to pages docs on my IMac. Is there and app available to do the former. many thanks. b
The iPad and related software is designed to sync with only one computer. I suggest transferring the photos from one of your iMacs to the other so that all photos are on one Mac. Same for all other files you want to sync over.
To get those AppleWorks files to the iPad you'll have to determine if Pages will open them. If it will then use the file sharing feature of iTunes to copy them to Pages on your pad.
If Pages will not open the AppleWorks files directly you'll have to save them in some format that Pages will read. These include but may not be limited to Pages and Word formats. -
I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help
It would depend on how old your IMac is, how mush memory you have, it it can be upgraded by OWC, etc. I have a 2006 Macbook Pro and would NOT put Mavericks on it or espeacially FCP 10.1.1 on it because the most memory it can have is 4 GB. You need at least 8 GB to work with Final Cut Pro 10.1.1. IMHO.
I would try to find a copy of Final Cut Express perhaps.
Does this answer your question? -
Want to convert Sap standard report into alvgrid
HI PLEASE HELP THIS IS CODE BELOW OF SAP STANDARD REPORT CODE WANT TO CONVERT INTO ALVGRID
LEAS HELP
REPORT RFKOPR00
MESSAGE-ID FR
LINE-SIZE 132
NO STANDARD PAGE HEADING.
TABLES: B0SG,
LFA1, "Daten auf Mandantenebene
LFB1, "Daten auf Buchungskreisebene
LFB5, "Mahndaten
LFC1, "Verkehrszahlen
LFC3, "Sonderumsätze
BSIK, "Offend Posten
BKPF,
BSEG,
BSEGA.
TABLES:
BHDGD,
T001,
T001S,
*T001S,
T074T,
T074U,
TBSL,
TBSLT,
TCURX,
ADRS,
RFPDO,
RFPDO1,
RFSDO,
FAEDE.
FIELD-SYMBOLS: .
*Hilfsfelder
*---Prüfung ob mehrere Hauswährungen verarbeitet werden.
DATA: CFAKT(3) TYPE P,
CHECKSALDO(8) TYPE P,
CHECKAGOBL(8) TYPE P,
WAERS LIKE T001-WAERS,
WFLAG(1) TYPE P VALUE '0',
WAERS2 LIKE T001-WAERS,
WFLAG2(1) TYPE P VALUE '0',
PH-LINE(132) TYPE C.
*---Ermittlung aktuelles Geschäftsjahr über Funktionsbaustein.
DATA: CURRY LIKE BSIK-GJAHR.
*-Ermittlung Zahlungseingang bei Zahlungen mit Skontoabzug--
*ATA: ZVTAGE LIKE KNB4-VZS01, "Verzugstage
ZVSKONTO(8) TYPE P, "Zahlungsvolumen bei Zahlung mit Skonto
ZVNETTO(8) TYPE P, "Zahlungsvolumen bei Nettozahlung
ZVVERZUG(8) TYPE P, "Verzugstage
ZVMALVZ(8) TYPE P, "Zahlungvolumen * Verzugstage
"KNB4-VZSxx)
ZVTYP(1) TYPE C, "Skonto oder Nettozahler
ZVPER(4) TYPE C. "Periode letze Zahlung
*---Zeilenanzahl fü Adressausgabe -
DATA: ZEILENANZAHL LIKE ADRS-ANZZL VALUE 7.
DATA: KSALDO(6) TYPE P. "Saldovortrag
BEABZUG(6) TYPE P, "Berechtigte Abzüge
UBABZUG(6) TYPE P, "Unberechtigte Abzüge
JAHRAUG(6) TYPE P, "Kumulierter Jahresausgleich
KUMZINS(6) TYPE P. "Kumulierter Zins
Ausgabe der Mahndaten pro Buchungskreis.
DATA: INDEX(2) TYPE P VALUE 0.
Hilfsfelder
DATA: HF(1) TYPE C.
DATA: TXT_1(78) TYPE C, "Mahnbereich
TXT_2(78) TYPE C, "Mahnart
TXT_3(78) TYPE C, "Mahnempfänger
TXT_4(78) TYPE C, "Mahndatum
TXT_5(78) TYPE C, "Mahnstufe
TXT_6(78) TYPE C, "Mahnsperre
TXT_7(78) TYPE C, "Mahnverfahren
TXT_8(78) TYPE C. "Sachbearbeiter
DATA: BEGIN OF XMAHN OCCURS 10.
INCLUDE STRUCTURE LFB5.
DATA: END OF XMAHN.
Hilfsfelder
DATA: CHAR1(1) TYPE C.
DATA: FLAG1(1) TYPE C.
DATA: INTENS(1) TYPE C.
DATA: FLAG2(1) TYPE C.
*---- K o n s t a n t e n -
*---- DNULL zum Vergleich mit Datumsfeldern -
DATA: DNULL(8) TYPE C VALUE '00000000'.
*---- DECKBLATT = 'N' ==> Kein Deckblatt bei NEW-SECTION -
DATA: DECKBLATT TYPE C VALUE 'N'.
*---- 'H' = Hilfsfelder, die jederzeit fuer Berechnungen ver- -
*---- wendet werden koennen. -
DATA: BEGIN OF H,
STICHTAG(8),
OFFSET(2) TYPE P,
OFFSE1(2) TYPE P,
SOLL LIKE LFC1-UM01S,
HABEN LIKE LFC1-UM01H,
SALDO LIKE LFC1-UMSAV,
SHBKZ LIKE LFC3-SHBKZ, "Sonderhauptbuchkennzeichen
SALDV LIKE LFC3-SALDV, "Sonderhauptbuch-Saldovortrag
SHBLS LIKE LFC3-SOLLL, "Sonderhauptbuch-Lfd.-Saldo
SHBSL LIKE LFC3-SOLLL, "Sonderhauptbuch-Lfd.-SOLL
SHBHB LIKE LFC3-HABNL, "Sonderhauptbuch-Lfd.-HABEN
GBNUM LIKE lfC1-GBN01, "Geschaeftsber. Nummer ECKERT
GBUMS LIKE lfC1-GBU01, "Geschaeftsber. Umsatz
TEXT(15),
UMLOW LIKE BSIK-UMSKZ, "Umsatzkennzeichen
UMHIG LIKE BSIK-UMSKZ, "Umsatzkennzeichen
END OF H.
---- 'C' = Zwischenergebnisse, die aus Feldern des C-Segmentes ---
*---- berechnet werden. -
DATA: BEGIN OF C,
SALDO TYPE P, "Saldo
UMKZ1 LIKE LFC3-SHBKZ, "SHBKZ 1
SUMS1 TYPE P, "Sonderumsatz 1
UMKZ2 LIKE LFC3-SHBKZ, "SHBKZ 2
SUMS2 TYPE P, "Sonderumsatz 2
UMKZ3 LIKE LFC3-SHBKZ, "SHBKZ 3
SUMS3 TYPE P, "Sonderumsatz 3
UMKZ4 LIKE LFC3-SHBKZ, "SHBKZ 4
SUMS4 TYPE P, "Sonderumsatz 4
UMKZ5 LIKE LFC3-SHBKZ, "SHBKZ 5
SUMS5 TYPE P, "Sonderumsatz 5
UMKZ6 LIKE LFC3-SHBKZ, "SHBKZ 6
SUMS6 TYPE P, "Sonderumsatz 6
UMKZ7 LIKE LFC3-SHBKZ, "SHBKZ 7
SUMS7 TYPE P, "Sonderumsatz 7
UMKZ8 LIKE LFC3-SHBKZ, "SHBKZ 8
SUMS8 TYPE P, "Sonderumsatz 8
UMKZ9 LIKE LFC3-SHBKZ, "SHBKZ 9
SUMS9 TYPE P, "Sonderumsatz 9
UMKZ10 LIKE LFC3-SHBKZ, "SHBKZ 10
SUMS10 TYPE P, "Sonderumsatz 10
SONOB TYPE P, "Sonstige Umsatz-Kz
BABZG TYPE P, "Berechtigte Abzuege
UABZG TYPE P, "Unberechtigte Abzuege
KZINS TYPE P, "Zinszahlungen
KUMUM TYPE P, "Umsatz
KUMAG TYPE P, "Kum. Jahresausgleich
KREUEB TYPE P, "Kreditueberschreitung
AGOBLI TYPE P, "Gesamt-Obligo (absolut)
AGOBLI LIKE LFC1-UMSAV, "Gesamt-Obligo (absolut)
RGOBLI TYPE P, "Gesamt-Obligo (relativ)
LFTAGE(3) TYPE P, "Langfristige Überzugstage
MFTAGE(3) TYPE P, "Mittelfristige Überzugstage
KFTAGE(3) TYPE P, "Kurzfristige Überzugstage
END OF C.
---- 'C2'= Zwischenergebnisse, die aus Feldern des C-Segmentes ---
*---- berechnet werden. -
DATA: BEGIN OF C2 OCCURS 0,
BUKRS LIKE LFC1-BUKRS,
SALDO TYPE P, "Saldo
WEXOB TYPE P, "Wechsel-Obligo W,S,B
ANZOB TYPE P, "Anzahlungs-Obligo A
ZANFB TYPE P, "Zahlungs-Anforderung F
UMKZ1 LIKE LFC3-SHBKZ, "SHBKZ 1
SUMS1 TYPE P, "Sonderumsatz 1
UMKZ2 LIKE LFC3-SHBKZ, "SHBKZ 2
SUMS2 TYPE P, "Sonderumsatz 2
UMKZ3 LIKE LFC3-SHBKZ, "SHBKZ 3
SUMS3 TYPE P, "Sonderumsatz 3
UMKZ4 LIKE LFC3-SHBKZ, "SHBKZ 4
SUMS4 TYPE P, "Sonderumsatz 4
UMKZ5 LIKE LFC3-SHBKZ, "SHBKZ 5
SUMS5 TYPE P, "Sonderumsatz 5
UMKZ6 LIKE LFC3-SHBKZ, "SHBKZ 6
SUMS6 TYPE P, "Sonderumsatz 6
UMKZ7 LIKE LFC3-SHBKZ, "SHBKZ 7
SUMS7 TYPE P, "Sonderumsatz 7
UMKZ8 LIKE LFC3-SHBKZ, "SHBKZ 8
SUMS8 TYPE P, "Sonderumsatz 8
UMKZ9 LIKE LFC3-SHBKZ, "SHBKZ 9
SUMS9 TYPE P, "Sonderumsatz 9
UMKZ10 LIKE LFC3-SHBKZ, "SHBKZ 10
SUMS10 TYPE P, "Sonderumsatz 10
SONOB TYPE P, "Sonstige Umsatz-Kz
BABZG TYPE P, "Berechtigte Abzuege
UABZG TYPE P, "Unberechtigte Abzuege
KZINS TYPE P, "Zinszahlungen
KUMUM TYPE P, "Umsatz
KUMAG TYPE P, "Kum. Jahresausgleich
KREUEB TYPE P, "Kreditueberschreitung
AGOBLI TYPE P, "Gesamt-Obligo (absolut)
AGOBLI LIKE LFC1-UMSAV, "Gesamt-Obligo (absolut)
RGOBLI TYPE P, "Gesamt-Obligo (relativ)
LFTAGE(3) TYPE P, "Langfristige Überzugstage
MFTAGE(3) TYPE P, "Mittelfristige Überzugstage
KFTAGE(3) TYPE P, "Kurzfristige Überzugstage
ZVTYP(1) TYPE C, "Flag Skonto oder Nettozahler
ZVPER(6) TYPE C, "letze Zahlungsperiode
ZVVERZUG(8) TYPE P, "Durchschittliche Verzugst
END OF C2.
---- 'C3'= Zwischenergebnisse, die aus Feldern des C-Segmentes ---
*---- berechnet werden. -
DATA: BEGIN OF C3,
SALDO TYPE P, "Saldo
WEXOB TYPE P, "Wechsel-Obligo W,S,B
ANZOB TYPE P, "Anzahlungs-Obligo A
ZANFB TYPE P, "Zahlungs-Anforderung F
UMKZ1 LIKE LFC3-SHBKZ, "SHBKZ 1
SUMS1 TYPE P, "Sonderumsatz 1
UMKZ2 LIKE LFC3-SHBKZ, "SHBKZ 2
SUMS2 TYPE P, "Sonderumsatz 2
UMKZ3 LIKE LFC3-SHBKZ, "SHBKZ 3
SUMS3 TYPE P, "Sonderumsatz 3
UMKZ4 LIKE LFC3-SHBKZ, "SHBKZ 4
SUMS4 TYPE P, "Sonderumsatz 4
UMKZ5 LIKE LFC3-SHBKZ, "SHBKZ 5
SUMS5 TYPE P, "Sonderumsatz 5
UMKZ6 LIKE LFC3-SHBKZ, "SHBKZ 6
SUMS6 TYPE P, "Sonderumsatz 6
UMKZ7 LIKE LFC3-SHBKZ, "SHBKZ 7
SUMS7 TYPE P, "Sonderumsatz 7
UMKZ8 LIKE LFC3-SHBKZ, "SHBKZ 8
SUMS8 TYPE P, "Sonderumsatz 8
UMKZ9 LIKE LFC3-SHBKZ, "SHBKZ 9
SUMS9 TYPE P, "Sonderumsatz 9
UMKZ10 LIKE LFC3-SHBKZ, "SHBKZ 10
SUMS10 TYPE P, "Sonderumsatz 10
SONOB TYPE P, "Sonstige Umsatz-Kz
BABZG TYPE P, "Berechtigte Abzuege
UABZG TYPE P, "Unberechtigte Abzuege
KZINS TYPE P, "Zinszahlungen
KUMUM TYPE P, "Umsatz
KUMAG TYPE P, "Kum. Jahresausgleich
KREUEB TYPE P, "Kreditueberschreitung
AGOBLI TYPE P, "Gesamt-Obligo (absolut)
AGOBLI LIKE LFC1-UMSAV, "Gesamt-Obligo (absolut)
RGOBLI TYPE P, "Gesamt-Obligo (relativ)
LFTAGE(3) TYPE P, "Langfristige Überzugstage
MFTAGE(3) TYPE P, "Mittelfristige Überzugstage
KFTAGE(3) TYPE P, "Kurzfristige Überzugstage
ZVTYP(1) TYPE C, "Flag Skonto oder Nettozahler
ZVPER(6) TYPE C, "letze Zahlungsperiode
ZVVERZUG(8) TYPE P, "Durchschittliche Verzugst
END OF C3.
DATA: SHBETRAG LIKE BSEGA-DMSHB. "TYPE P.
*---- 'RTAB' = Rastertabelle fuer offene Posten -
DATA: BEGIN OF RTAB OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
"2 = Umsatzdaten
BUKRS LIKE BSIK-BUKRS,
GSBER LIKE BSIK-GSBER,
WAERS LIKE BSIK-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
SPERR TYPE P, "gesprrte Posten
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RTAB.
*---- 'RBUS' = Rastertabelle fuer Summen pro Sachbearbeiter -
*ATA: BEGIN OF RBUS OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
BUKRS LIKE BSIk-BUKRS,
GSBER LIKE BSIk-GSBER,
WAERS LIKE BSIk-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RBUS.
*---- 'RBUK' = Rastertabelle fuer Summen pro Buchungskreis -
DATA: BEGIN OF RBUK OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
"2 = Umsatzdaten
BUKRS LIKE BSIK-BUKRS,
GSBER LIKE BSIK-GSBER,
WAERS LIKE BSIK-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
SPERR TYPE P, "gesprrte Posten
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RBUK.
---- 'RSUM' = Rastertabelle pro Währung über alle Buchungskreise ---
DATA: BEGIN OF RSUM OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
BUKRS LIKE BSIk-BUKRS,
GSBER LIKE BSIk-GSBER,
WAERS LIKE BSIK-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
SPERR TYPE P, "gesperrte Posten
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RSUM.
*---- interne Tabelle für Periodenabgrenzung----
RANGES: BMONAT FOR RFPDO-DOPRBMON.
---- In die Felder RP01 bis RP05 werden dynamisch die von aussen ---
*---- eingegebenen Rasterpunkte uebertragen -
DATA: RP01(2) TYPE P, " 0
RP02(2) TYPE P, " 20
RP03(2) TYPE P, " 40
RP04(2) TYPE P, " 80
RP05(2) TYPE P, " 100
RP06(3) TYPE P, " 1
RP07(3) TYPE P, " 21
RP08(3) TYPE P, " 41
RP09(3) TYPE P, " 81
RP10(3) TYPE P. " 101
*---- In die Felder RC01 bis RC10 werden die Rasterpunkte in -
---- charakterform abgestellt. (fuer REPLACE-Funktion in Variabler -
*---- Ueberschrift) -
DATA: RC01(4) TYPE C, " 0
RC02(4) TYPE C, " 20
RC03(4) TYPE C, " 40
RC04(4) TYPE C, " 80
RC05(4) TYPE C, " 100
RC06(4) TYPE C, " 1
RC07(4) TYPE C, " 21
RC08(4) TYPE C, " 41
RC09(4) TYPE C, " 81
RC10(4) TYPE C. " 101
*---- Felder für Umsatzkennzeichen -
*---- für Ausweis der Sonderumsätze----
DATA: HUMKZ1 LIKE LFC3-SHBKZ,
HUMKZ2 LIKE LFC3-SHBKZ,
HUMKZ3 LIKE LFC3-SHBKZ,
HUMKZ4 LIKE LFC3-SHBKZ,
HUMKZ5 LIKE LFC3-SHBKZ,
HUMKZ6 LIKE LFC3-SHBKZ,
HUMKZ7 LIKE LFC3-SHBKZ,
HUMKZ8 LIKE LFC3-SHBKZ,
HUMKZ9 LIKE LFC3-SHBKZ,
HUMKZ10 LIKE LFC3-SHBKZ.
*---- GBZAEHL - In diesem Feld wird vermerkt, fuer wieviele Ge- -
*---- schaeftsbereiche ein OP-Raster ausgegeben wird. -
---- Wird das Raster nur fuer einen Geschaeftsbereich ge- -
*---- druckt, so entfaellt das Summen-Raster. -
DATA: GBZAEHL(3) TYPE P.
---- TOP-FLAG '1' = bei TOP-OF-PAGE Einzelpostenueberschrift ausg. --
*---- '2' = bei TOP-OF-PAGE Ueberschrift fuer Raster ausgeb. *
*---- '3' = bei TOP-OF-PAGE ULINE ausgeben. -
---- '4' = bei TOP-OF-PAGE Stammsatzueberschrift ausgeben --
DATA: TOP-FLAG(1) TYPE C.
*---- SEL-STAMM 'J' = Stammsatz wird ausgewertet *
*---- 'N' = Stammsatz wird nicht ausgewertet *
*---- SEL-POSTN 'J' = Stammsatz hat Posten gerastert *
*---- 'N' = Stammsatz hat keine Posten gerastert *
DATA: BEGIN OF SEL,
STAMM(1) TYPE C,
POSTN(1) TYPE C,
POST2(1) TYPE C,
END OF SEL.
*---- SATZART '1' = Stammdaten -
*---- '2' = Faelligkeitsraster -
*---- '3' = Einzelposten -
DATA: SATZART(1) TYPE C.
*---- RART = Erste ausgewaehlte Rasterart -
DATA: RART(1) TYPE C.
*---- TAGE = Tage nach denen die Posten sortiert sind -
DATA: TAGE(4) TYPE P,
*---- NTAGE = Tage fuer Netto-Faelligkeit -
NTAGE(4) TYPE P,
*---- STAGE = Tage fuer Skonto1-Faelligkeit -
STAGE(4) TYPE P,
*---- ATAGE = Alter der Belege -
ATAGE(4) TYPE P,
*---- UTAGE = Tage fuer Ueber-Faelligkeit -
UTAGE(4) TYPE P.
*---- RASTERUU dient zur Sortierung der Einzelposten. Die Posten -
*---- gemaess ihrer Rasterung die Werte '1' bis '6' -
DATA: RASTERUU(1) TYPE C.
*---- RAART Rasterart -
---- Die einzelnen Felder der Feldleiste werden bei SART-OF-SELECTION
*---- mit 1 oder 0 bestueckt. -
*ATA: BEGIN OF RAART,
NET(1) TYPE C, "X = ausgewaehlt, ' ' = nicht ausgewaehlt
SKT(1) TYPE C, "X = ausgewaehlt, ' ' = nicht ausgewaehlt
UEB(1) TYPE C, "X = ausgewaehlt, ' ' = nicht ausgewaehlt
END OF RAART.
DATA: BEGIN OF GB,
GSBER LIKE BSIK-GSBER,
WAERS LIKE BSIK-WAERS,
END OF GB.
*---- Variable Ueberschriften -
DATA: BEGIN OF VARUEB1,
FELD1(45) TYPE C,
FELD2(14) TYPE C,
FELD3(14) TYPE C,
FELD4(14) TYPE C,
FELD5(14) TYPE C,
FELD6(14) TYPE C,
FELD7(14) TYPE C,
END OF VARUEB1.
DATA: BEGIN OF VARUEB2,
FELD1(45) TYPE C,
FELD2(14) TYPE C,
FELD3(14) TYPE C,
FELD4(14) TYPE C,
FELD5(14) TYPE C,
FELD6(14) TYPE C,
FELD7(14) TYPE C,
END OF VARUEB2.
DATA: VARUEB3(132),
VARUEB4(132),
VARTXT1(40),
VARTXT(40) TYPE C.
*---- Variable für Ausgabe der Sonderumsätze----
DATA: SHBBEZ LIKE T074T-LTEXT.
DATA: ASUMS TYPE P. "
*---- Interne Tabelle für Bezeichnungen der SHBKZ----
DATA: BEGIN OF BEZSHB OCCURS 10,
SHBKZ LIKE T074T-SHBKZ,
LTEXT LIKE T074T-LTEXT,
END OF BEZSHB.
*---- Interne Tabelle für Zwischenspeicherung -
DATA: BEGIN OF BLKEY,
BUKRS LIKE BSIK-BUKRS,
BELNR LIKE BSIK-BELNR,
GJAHR LIKE BSIK-GJAHR,
BUZEI LIKE BSIK-BUZEI,
END OF BLKEY.
DATA: BEGIN OF RTAGE,
NTAGE LIKE NTAGE,
STAGE LIKE STAGE,
ATAGE LIKE ATAGE,
UTAGE LIKE UTAGE,
END OF RTAGE.
DATA: BEGIN OF HBSIK OCCURS 10.
INCLUDE STRUCTURE BSIK.
INCLUDE STRUCTURE BSEGA.
INCLUDE STRUCTURE RTAGE.
DATA: END OF HBSIK.
DATA: BEGIN OF REFBL OCCURS 10.
INCLUDE STRUCTURE BLKEY.
INCLUDE STRUCTURE RTAGE.
DATA: END OF REFBL.
DATA: BEGIN OF HLFB1 OCCURS 10.
INCLUDE STRUCTURE LFB1.
DATA: END OF HLFB1.
DATA: BEGIN OF HT001 OCCURS 10.
INCLUDE STRUCTURE T001.
DATA: END OF HT001.
*---- Interne Tabelle für Ausgabe der Obligos -
DATA: BEGIN OF AOBLIGO OCCURS 12,
OBART TYPE C, "Flag für Obligoart 1 = Kontokorrent
" 2 = SHBKZ
" 3 = sonstige SHB
SHBKZ LIKE T074T-SHBKZ, "SHB-Kennzeichen
LTEXT LIKE T074T-LTEXT, "Bezeichnung
OBLIG TYPE P, "Obligobetrag
END OF AOBLIGO.
*---- Declarationen für Accessibility /ALV GRID -
data: ACC_MODE type c.
Data: UEBTEXT(22) type c.
Data: UEKTEXT(15) type c.
Data: TITTEXT(100) type c.
Data: DATTEXT(10) type c.
DATA: BEGIN OF RTAB_ALV OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
"2 = Umsatzdaten
BUKRS LIKE BSIk-BUKRS,
lifnr LIKE LFA1-lifnr,
busab like lfb1-busab,
SORTL LIKE lfA1-SORTL,
LAND1 LIKE lfA1-LAND1,
GSBER LIKE BSIk-GSBER,
WAERS LIKE BSIk-WAERS,
hwaer like rf140-hwaer,
RAART like RF140-RAART, "Rasterart
shkzg like bsik-shkzg,
XGUTS TYPE C, "Gutschrift
KUMUM LIKE RF140-KUMUMHW, "Umsatz
ANZAH like rf140-anzbthw, "Anzahlungen
OPSUM like RF140-gsaldd, "Offene Posten Summe
RAST1 like RF140-rast1, "Rasterfeld 1
RAST2 like RF140-rast2, "Rasterfeld 2
RAST3 like RF140-rast3, "Rasterfeld 3
RAST4 like RF140-rast4, "Rasterfeld 4
RAST5 like RF140-rast5, "Rasterfeld 5
RAST6 like RF140-rast6, "Rasterfeld 6
END OF RTAB_ALV.
*"General Data
TYPE-POOLS: SLIS.
*DATA: BEGIN OF GT_OUTTAB OCCURS 0.
INCLUDE STRUCTURE rtab_alv.
*DATA: END OF GT_OUTTAB.
Data: GS_LAYOUT TYPE SLIS_LAYOUT_ALV,
G_EXIT_CAUSED_BY_CALLER,
GS_EXIT_CAUSED_BY_USER TYPE SLIS_EXIT_BY_USER,
G_REPID LIKE SY-REPID,
G_GRID_TITLE TYPE LVC_TITLE.
*"Callback
*Data: GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
G_STATUS_SET TYPE SLIS_FORMNAME VALUE 'PF_STATUS_SET',
Data: G_USER_COMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND'.
G_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
G_TOP_OF_LIST TYPE SLIS_FORMNAME VALUE 'TOP_OF_LIST',
G_END_OF_LIST TYPE SLIS_FORMNAME VALUE 'END_OF_LIST'.
*"Variants
DATA: GS_VARIANT LIKE DISVARIANT,
G_SAVE.
Global structure of list
fieldcatalog
DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
sort
*DATA: GT_SORT TYPE SLIS_T_SORTINFO_ALV.
events
*DATA: GT_EVENTS TYPE SLIS_T_EVENT.
*----- Structure for specific color settings -
*DATA: COL_TAB_T TYPE SLIS_T_SPECIALCOL_ALV,
COL_TAB TYPE SLIS_SPECIALCOL_ALV.
DATA: G_TABNAME TYPE SLIS_TABNAME VALUE 'RTAB_ALV'.
print
*DATA: GS_PRINT TYPE SLIS_PRINT_ALV.
*---- FIELD-GROUPS -
FIELD-GROUPS:
HEADER,
STAMMDATEN,
OP-RASTER,
EINZELPOSTEN.
INSERT
LFB1-BUKRS " Buchungskreis
lfB1-BUSAB " Sachbearbeiter
LFA1-LIFNR " Kontonummer
SATZART " Satzart
RTAB-SORTK " Sortkz fuer Tabelle RTAB
" '0' = normale Eintraege
" '1' = Summeneintraege
GB " Geschaeftsbereich
" - GB-GSBER
" - GB-WAERS
RASTERUU " Kennzeichen fuer Detailposten bzw Raster
ab hier nur fuer Einzelposten -
TAGE " Rastertage fuer Detailposten
BSIK-UMSKZ " Umsatzkennzeichen
BSIK-BLART " Belegart
BSIK-ZUONR " Zuordnungsnummer
BSIK-BELNR " Belegnummer
BSIK-BUZEI " Belegzeile
INTO HEADER.
INSERT
Addressdaten
ADRS-LINE0 " 1. Zeile Adressenaufbereitung
ADRS-LINE1 " 2. " "
ADRS-LINE2 " 3. " "
ADRS-LINE3 " 4. " "
ADRS-LINE4 " 5. " "
ADRS-LINE5 " 6. " "
ADRS-LINE6 " 7. " "
ADRS-LINE7 " 8. " "
ADRS-LINE8 " 9. " "
ADRS-LINE9 " 10." "
Umsatzdaten
C-KUMUM " Umsatz
C-BABZG " Berechtigt. Abzuege
C-UABZG " Unberechtigt. Abzuege
C-KZINS " Zinszahlungen
C-KUMAG " Kum. Jahresausgleich
Obligos
C-SALDO " Saldo ohne SHB-Vorgänge
C-UMKZ1 "SHBKZ 1
C-SUMS1 "Sonderumsatz 1
C-UMKZ2 "SHBKZ 2
C-SUMS2 "Sonderumsatz 2
C-UMKZ3 "SHBKZ 3
C-SUMS3 "Sonderumsatz 3
C-UMKZ4 "SHBKZ 4
C-SUMS4 "Sonderumsatz 4
C-UMKZ5 "SHBKZ 5
C-SUMS5 "Sonderumsatz 5
C-UMKZ6 "SHBKZ 6
C-SUMS6 "Sonderumsatz 6
C-UMKZ7 "SHBKZ 7
C-SUMS7 "Sonderumsatz 7
C-UMKZ8 "SHBKZ 8
C-SUMS8 "Sonderumsatz 8
C-UMKZ9 "SHBKZ 9
C-SUMS9 "Sonderumsatz 9
C-UMKZ10 "SHBKZ 10
C-SUMS10 "Sonderumsatz 10
C-SONOB " Sonst. Obligen
Limits
C-AGOBLI " Absolutes Gesamtobligo
Zahlungdaten
LFB1-ZTERM "Zahlungsbedingung
LFB1-ZAHLS "Sperrschlüssel für Zahlung
LFB1-ZWELS "Zahlwege
LFB1-XVERR "Zahlungsverrechnung
LFB1-WEBTR "Wechsellimit
LFB1-BUSAB " Sachbearbeiter
lfa1-sortl
lfa1-land1
INTO STAMMDATEN.
INSERT
RTAB-RAART "Rasterart
RTAB-SPERR "gesperrte Posten
RTAB-KUMUM "Umsatz
RTAB-ANZAH "Anzahlungen
RTAB-OPSUM "Offene Posten Summe
RTAB-RAST1 "Rasterfeld 1
RTAB-RAST2 "Rasterfeld 2
RTAB-RAST3 "Rasterfeld 3
RTAB-RAST4 "Rasterfeld 4
RTAB-RAST5 "Rasterfeld 5
RTAB-RAST6 "Rasterfeld 6
INTO OP-RASTER.
INSERT
BSIK-BUDAT " Buchungsdatum
BSIK-BLDAT " Belegdatum
BSIK-CPUDT " CPU-Datum
BKPF-USNAM " User-ID
BSIK-WAERS " Wahrungsschluessel
BSEGA-NETDT " Nettofaelligkeitsdatum
FAEDE-NETDT " Nettofaelligkeitsdatum
BSIK-ZFBDT " Zahlungsfristen-Basisdatum
BSIK-BSCHL " Buchungsschluessel
BSIK-ZLSCH " Zahlungsschluessel
BSIK-MANST " Mahnstufe
SHBETRAG " Hauswaehrungsbetrag
BSEGA-DMSHB " Hauswaehrungsbetrag
BSEGA-WRSHB " Fremwaehrungsbetrag
INTO EINZELPOSTEN.
BEGIN_OF_BLOCK 1.
*ELECT-OPTIONS:
GESBER FOR BSIK-GSBER.
PARAMETERS:
MONAT LIKE RFPDO-DOPRBMON.
SELECT-OPTIONS:
KKSALDO2 FOR RFSDO-KOPRSAL2, "Saldovortrag
AGOBLIG2 FOR RFSDO-KOPRAGO2. "Absolutes Obligo
RGOBLIGO FOR RFSDO-DOPRRGOB. "Relatives Obligo
SELECT-OPTIONS:
LAND FOR LFA1-LAND1,
KONTENGR FOR LFA1-KTOKK,
SACHBEAR FOR LFB1-BUSAB,
AKONTS FOR LFB1-AKONT,
AKONTP FOR BSIK-HKONT.
SELECT-OPTIONS:
BUDAT FOR BSIK-BUDAT,
BLDAT FOR BSIK-BLDAT,
NETDT FOR BSEGA-NETDT.
PARAMETERS: N_BELEGE LIKE RFPDO-BPETNBEL
DEFAULT 'X', "Normale Belege.
STAT_BLG LIKE RFPDO-BPETSBEL. "Statistische Belege
END_OF_BLOCK 1.
*ELECT-OPTIONS:
BERABZU1 FOR LFC1-BABZG,
UNBABZU1 FOR LFC1-UABZG,
ZINSE1 FOR LFC1-KZINS,
JHRAUSG1 FOR LFC1-KUMAG.
BERABZUG FOR BEABZUG NO-DISPLAY, "Berechtigter Abzug
UNBABZUG FOR UBABZUG NO-DISPLAY, "Unberechtigter Abzug
ZINSEN FOR KUMZINS NO-DISPLAY, "Kumulierter Zins
JHRAUSGL FOR JAHRAUG NO-DISPLAY. "Kumulierter Jahresausgl.
BEGIN_OF_BLOCK 2.
PARAMETERS:
SORTART LIKE RFPDO1-KOPRSOAR DEFAULT '1', "Doku
VERDICHT LIKE RFPDO1-KOPRVERD DEFAULT '1', "Doku
RASTVERD LIKE RFPDO1-KOPRRAST DEFAULT '0', "Doku
KONZVERS LIKE RFPDO-DOPOKONZ, "Konzernversion
XBUKRDAT LIKE RFPDO3-ALLGBUKD DEFAULT 0, "Bukr.daten
KAUSGABE like rfpdo3-ALLGKAOR.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(30) TEXT-030.
PARAMETERS: RART-NET LIKE RFPDO-DOPRRNET DEFAULT 'X'.
SELECTION-SCREEN COMMENT 33(01) TEXT-028.
PARAMETERS: RART-SKT LIKE RFPDO-DOPRRSKT DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(01) TEXT-028.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: RART-ALT LIKE RFPDO1-KOPRRALT DEFAULT 'X'.
SELECTION-SCREEN COMMENT 03(28) TEXT-031.
SELECTION-SCREEN POSITION POS_HIGH.
PARAMETERS RBLDAT LIKE RFPDO2-KORD10BD.
SELECTION-SCREEN COMMENT 61(12) TEXT-032.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN COMMENT 37(01) TEXT-028.
PARAMETERS: RART-UEB LIKE RFPDO-DOPRRUEB DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(31) TEXT-026.
PARAMETERS: RASTBIS1 LIKE RFPDO1-ALLGROGR DEFAULT '000'.
SELECTION-SCREEN COMMENT 35(02) TEXT-027.
PARAMETERS: RASTBIS2 LIKE RFPDO1-ALLGROGR DEFAULT '020'.
SELECTION-SCREEN COMMENT 41(02) TEXT-027.
PARAMETERS: RASTBIS3 LIKE RFPDO1-ALLGROGR DEFAULT '040'.
SELECTION-SCREEN COMMENT 47(02) TEXT-027.
PARAMETERS: RASTBIS4 LIKE RFPDO1-ALLGROGR DEFAULT '080'.
SELECTION-SCREEN COMMENT 53(02) TEXT-027.
PARAMETERS: RASTBIS5 LIKE RFPDO1-ALLGROGR DEFAULT '100'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(31) TEXT-029.
PARAMETERS: FAKTOR LIKE RFPDO-DOPRFAKT DEFAULT '0'.
SELECTION-SCREEN COMMENT 35(1) TEXT-028.
PARAMETERS: STELLEN LIKE RFPDO-DOPRFAKT DEFAULT '0'.
SELECTION-SCREEN END OF LINE.
PARAMETERS: PZUOR LIKE RFPDO2-DOPRZUOR.
PARAMETERS: UMSATZKZ LIKE RFPDO1-DOPRSHBO. "DEFAULT 'WSABIMVD'.
PARAMETERS:
TITLE LIKE RFPDO1-ALLGLINE,
LISTSEP LIKE RFPDO-ALLGLSEP,
MIKFICHE LIKE RFPDO-ALLGMIKF.
PARAMETERS:
P_LVAR LIKE Gs_VARIANT-VARIANT DEFAULT SPACE modif id 508.
END_OF_BLOCK 2.
AT SELECTION-SCREEN OUTPUT.
if acc_mode is initial.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = '508'.
SCREEN-active = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
endif.
AT SELECTION-SCREEN ON AKONTS.
Konvertierung der Kontonummer
LOOP AT AKONTS.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTS-LOW AKONTS-LOW.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTS-HIGH AKONTS-HIGH.
MODIFY AKONTS.
ENDLOOP.
AT SELECTION-SCREEN ON AKONTP.
Konvertierung der Kontonummer
LOOP AT AKONTP.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTP-LOW AKONTP-LOW.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTP-HIGH AKONTP-HIGH.
MODIFY AKONTP.
ENDLOOP.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_LVAR.
Gs_VARIANT-REPORT = SY-REPID.
Gs_VARIANT-VARIANT = P_LVAR.
PERFORM F4_FOR_S_LVAR USING Gs_VARIANT.
P_LVAR = Gs_VARIANT-VARIANT.
AT SELECTION-SCREEN.
IF NOT RASTBIS5 IS INITIAL.
IF RASTBIS5 GT RASTBIS4
AND RASTBIS4 GT RASTBIS3
AND RASTBIS3 GT RASTBIS2
AND RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
ENDIF.
ELSE.
IF NOT RASTBIS4 IS INITIAL.
IF RASTBIS4 GT RASTBIS3
AND RASTBIS3 GT RASTBIS2
AND RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
ENDIF.
ELSE.
IF NOT RASTBIS3 IS INITIAL.
IF RASTBIS3 GT RASTBIS2
AND RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
ENDIF.
ELSE.
IF NOT RASTBIS2 IS INITIAL.
IF RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
EHi Laxman,
I have checked the program and found out following:
the field "acc_mode" which gets populated by FM "GET_ACCESSIBILITY_MODE".
If this field is initial, then normal list gets displayed and
If this field has value, then ALV grid gets displayed.
regards,
Dharitree -
I have a pdf File tht I want to convert to a word program. how do I do that?
I have a pdf file that I want to convert to a word program. How do I do that?
Hi Patrick,
You have subscribed for this service yesterday, uaually it would take 24 hrs to get this service activated. I can see that your service is now up and running.
Kindly check the below mentioned article on how to get started with ExportPDF:
http://forums.adobe.com/docs/DOC-2412
Let me know if you have any issue while accessing the service,
Regards,
~Pranav -
When I try to convert my .pdf to Word, I get a sidebar that has fields for: the name of my pdf file, the type of file I want to convert to (In my case, Word), and a button that says "Convert". My problem is that the "convert to" field isn't active. I can see the words "Microsoft Word" in pale gray, but when I click on the field, nothing happens.
You have posted in the wrong forum. Try posting in the forum for the product you are trying to use.
Here is a link to a page that has links to all Adobe forums... use the drop down list to see all.
Forum links page:
https://forums.adobe.com/welcome -
I signed up for a free trial. I want to convert a Word document to a PDF document. I've signed in and been through the process a dozen times. It doesn't work.
Hi kemtnilion,
What did you get a trial of? Adobe doesn't offer free trials of the Acrobat.com online services; did you get a free trial of Acrobat, perhaps? If so, you can save a PDF directly to Word from Acrobat, by choosing File > Save as Other > Microsoft Word > Word Document.
Please let us know if you have additional questions.
Best,
Sara -
Why am I only given the option to create a pdf when I want to convert from pdf to word document? My plan is the PDF pack it should do it ¡
Hi,
I checked your account,you have an active PDF pack.
You need to click on Export PDF to convert from PDF to word document.
Regards,
Florence -
Why am I only given the option to create a pdf when I want to convert from pdf to word document?
Why am I only given the option to create a pdf when I want to convert from pdf to word document?
Hi,
If you have PDF pack subscription you can avail all of the services like export PDF,create PDF & etc.
Otherwise you have to purchase every service individually.
Regards,
Florence -
An existing PDF portfolio and want to convert it to Acrobat's Portfolio but when I pull it in
I have an existing PDF portfolio and want to convert it to Acrobat's Portfolio but when I pull it into Portfolio is shows one document but does not show the 55 pages that make the exisiting portfolio of work. Help, all I can seem to find are directions to pull in every photo individually.
Dave, he is asking the same thing I want to ask.
He has a pdf portfolio and what he actually wants is a basic pdf. (his pdf portfolio has already been made, ie existing, not hypothetical!)
I cannot find the answer either... extremely frustrating since I was not ever trying to create some flash based slide show, but a proper PDF, and inadvertently created the portfolio when choosing to Create PDF From File... You would THINK the default behaviour would then be to create a PDF, and NOT a portfolio pdf!!!!!
Really annoying and frustrating... bad job Adobe!
Is there a way to convert back to basic pdf??
Mark
Maybe you are looking for
-
Error: java.util.ConcurrentModificationException
Hi Experts, I am trying to login UME from index.html, i got following error. java.util.ConcurrentModificationException at java.util.HashMap$HashIterator.nextEntry(HashMap.java:793) at java.util.HashMap$ValueIterator.next(HashMap.java:822)
-
Converting a Labwindows 4.0.1 project to Labwindows 6.0 project
Please send me the information for converting a Labwindows 4.0.1 project to Labwindows 6.0 project. The problem what I am facing is A dll which is working in Labwindows 4.0.1 is not able to be recognized in Labwindows 6.0. So Please help me as early
-
Dear Experts, I have configured mail scenario for target message i have used the mail packaging but unfortunately i can able to send only one mail at a time because the occurance is 1..1. but i have to send N number mails at a time. if 5 Employees re
-
no amber till now. can someone answer me some questions? my firmware revision no. is 1030.6407.1308.0001. do i have to update it to 1030.6407.1308.0002 to get the amber update? is the update is carrier specific in India? my mobile operator-000-IN man
-
Downgraded to ios7.1.2 all apps gone.
Downgrades to ios 7.1.2. All my apps are gone, expected that. never backed up to a computer, just to the cloud. Can't find backups in iTunes. Supposed to be there but I can't find it. Thought I could just download all my apps from the App Store like