I want to create a authorization group for cic0 tcode.

i want to create a authorization group for cic0 tcode.
in detail...
in cic0 tcode i will enter business partner name
and press enter it gives me list of same names..
i want to restrict as per the region..there...
for exapmle....
if i enter name as raja
it gives me a list of raja in all region
but i want for a particular region....
how to create a authori object.....................
Regards
Anbu

https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a92195a9-0b01-0010-909c-f330ea4a585c
If you start SU21, find the authorization object and double click on it you should be able to see who the author is.
Or you can findout through SUIM

Similar Messages

Want to create new protection group for 2 members which are already under another protection group.

Want to create new protection group for 2 members which are already under another protection group. I have 12 servers under xyz protection group, want to move 2 members server to new protection group. How it is possible without loosing current backups.

Hi,
It all depends if the data source was originally co-located on the same replica shared with other data sources. If not then DPM will simple re-use the same replica and pick up where it left off. If it was co-located, then the old replica and RP
volume is shared and the RP's will expire as new ones are made on the new replica and RP volume created when it's re-protected.
Moving Between Co-Located and Non-Co-Located Protection Groupshttp://technet.microsoft.com/en-us/library/ff399045.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Creating Authorization groups for material types

Hi All,
I have a requirement to create Authorization groups for different material types we have in our company. Basically these are intended to restric the users from accessing the material master. Different material types needs to be assigned to differnt group of users.
So if we can create couple of Authorization groups, then I am thinking of assigning the material types to these groups.
I went to SPRO---Logistics general ---Material master -
Tools --- Maintain authorization and authorization profiles. TCODE : PFCG
Is this the right path?
Please advise
Shane

Hi All,
I don't think SPRO---Logistics general -Material master- Tools --- Maintain authorization and authorization profiles is the right path to create new authorization groups.
Can anyone explain how to create new authorization groups for different material types. The purpose is to create a role and assign this auth. group to this role and provide that security role to specific users.
Regards
Shane

How to create authorization groups for G/L Accounting

Hi:
I have a problem with authorizations groups in FI, I hope you could help me.
We want to control access to accounting in FI by authorization group so user only can work with some G/L accounts.
I have seen in transaction FS00, in control data tab, a field called Auth. Group, but I really donu2019t know if this is the right field.
Do you know how I can control access to G/L Accounts by Authorization Groups? Perhaps must I to create a new Authorization Group by roles? We have 4.6c.
Please, any help is welcome.
Thanks in advance.

Hi
Update the authorization group field in the GL master with any user defined value and then include the same in the respective user roles against the authorization object - F_BKPF_BES-BRGRU in PFCG
Ensure you have updated 'Authorization group' for the GL accounts in your chart of accounts
Thank You,

Authorization Group for G/L Account

Hi,
What?
- I wish to restrict the 'posting' of a G/L account to be done by certain users only
How?
- What I have done was...
a) From FS00, I have added a free-text (BANK) into the Authorization Group for a G/L account
b) From PFCG, a new role was created to allow these 2 Authorization Objects, F_BKPF_BES and F_SKA1_BES
c) 'BANK' was entered for the Authorization Group for both these 2 Authorization Objects
d) From there, I have assigned this new role to the user that I wish to allow Posting of the G/L account
Problem?
- Other users still can do Posting for this G/L account
- Any steps which I have missed out here or done wrongly?
Thanks,
Brandon

Hi,
Some other roles of the users may override and cause the users to post against this GL account.
Check all the roles relevant for the restricted users.
Use SUIM t-code to find if the auth object mentioned above is included in any other role.
If it be, restrict that again.
Generally if one role as no restriction against this auth and not all, this issue tends to happen.
Regards,
Sridevi

Best Approach to create Security / Authorization Schema for an APEX Apps

Hi,
I am planning to create a Security / Authorization Schema for an APEX Application.
Just want to know what is the best approach to create the security feature in APEX, so that it should be re-used in other APEXApplications too..
I am looking for following features...
1. users LOGIN and then user's name is stored in APEX_USER...
2. Based on the user, I want to restrict the Application on following levels.
- TABS
- TABS - Page1 (Report
- Page2 (Form)
- Page2 (Region1)
- Page2 (Region1, Button1)
- Page2 (Region1, Items,....)
AND so on.....basically depending on user....he will have access to certain TABS, Pages, Regions, Buttons, Items...
I know, we have to create the Authorization Schema for this and then attach these Authorization Schema to the different Level we want.
My Question is, what should be the TABLE structure to capture these info for each user...where we will say...this USER will have following access...AND then we create Authorization Schema from this table...
Also what should be the FRONT end, we should have to enter these detail...
SO, wondering, lot of people may already have implemented this feature....so if guys can provide the BEST Approach (re-usable for other APEX Application)....that will be really nice..
Thanks,
Deepak

Hi Raghu,
thanks for the detial info.
so that means..I should have 2 table...
master table (2 columns - username, password)
        username    password
   user1       xxxx
   user2       xxxx2nd table (2 columns - username, chq_disp_option)
- In this table, we don't have Y/N Flag you mentioned..
- If we have to enter all the regions/tabs/pages in the Applications here or just those regions/tabs/pages for which are conditionally diaplayed.
- so that means in all the Pages/Regions/tabs/items in the entire Application, we have to call the Conditionally display..
- suppose we have 3 tabs, 5 pages, 6 regions, 15 items..that means in this table we have to enter (3+5+6+15) = 29 records for each individual users..
          username    chq_disp_option
   user1       re_region1
   user1       re_region2
   user1       tb_main
   user1       Page1
   user1       Page5
   ----        ----     - how you are defining unique name for Regions..i mean in static ID or the Title
- is the unique name for tab & item is same as the TAB_NAME (T_HOME) & Item Name (P1_ITEM1) or you are defining somewhere else.
Thanks,
Deepak

How to create a authority group for our customer table(se54)?

Hi,everyone:
I found a problem when I create a authority group for my customer table,I can't write the creation
to a request no(can't assign to a package),I want to know whether the authority group I created can be
transport to the PRD when I realse the request no.
Thanks!!!

Auth Group is nothing but a table entry so for sure it can be transported to any environment, before Assigning any Auth group create one in SE54 when you try saving it it would ask you the TR number which you can transport to PROD.

Basic steps in creating an authorization group/role?

Hi,
What are the basic steps followed in creating an authorization group and role?

HI,
http://help.sap.com/saphelp_wp/helpdata/en/52/6714b6439b11d1896f0000e8322d00/frameset.htm
Steps,
Go to PFCG
Enter role name say ZSALES ORDER PROCESSING and click on single role
Enter discription and save
Then click on MENU tab,then click on transaction and maintain t-codes like VA01,VA02,VA03 and click on assign transactions and save
Then click on AUTHORIZATION tab and click to Change autorization data,then it will ask for orgz. level maintain orgz.data or click on FULL Authorization
Then you can able to see modules from where the the transaction code belongs(SD)
Expand it to lower level node and maintain autorization for Perticular sales document, sales area
Then save and click on GENEREATE ICON (Shift+F5)
Now go to tab USER and assign users
Click on user comparision >> Complete comparision
Now when the assigned user log in syatem system will display this role for user and he/she may authorization for perticular sales document and sales area depending uppon your authorization provided in this role.
You can see existing roles and copy from existing one
kapil

Hi, can anyone tell me if I can have more than one iTunes account on the same PC. I've just bought my wife an iPad2 and want to create a separate account for her. Can I do that on the same PC as mine?

Hi, can anyone tell me if I can have more than one iTunes account on the same PC. I've just bought my wife an iPad2 and want to create a separate account for her. Can I do that on the same PC as mine? Thanks.

I would advise that you not set up a second Apple ID. It's really not necessary - having two Apple IDs won't affect how iTunes works with your iPads - and will just complicate matters. Each iPad will be treated independently and can be set to sync only the items you want on that particular iPad. If you really want to keep the two iPads separate, set up different iTunes libraries and have only those items you want on the related iPad in that library, rather than a different Apple ID. If you plan not to use a computer and just download directly to the iPads, you can again choose what apps and content each iPad gets.
But answering your specific question, you can have content from up to five iTunes Store accounts on any one computer or iPad. To create a new iTunes Store account, you'll need a different email address, and from there you just create the account the same way you did the first one.
Regards.

I just recently purchased a mini iPad for my child. It was set up in the Apple store with my Apple id. I now want to create an Apple id for my child and switch it over, how can I go about that. I already downloaded some of the games from my account.

I just recently purchased a mini iPad for my child. It was set up in the Apple store with my Apple id. I now want to create an Apple id for my child and switch it over, how can I go about that. I already downloaded some of the games from my account.

With a new account, you'll need to rebuy the games.
Each user should have their own icloud account, otherwise they end up getting the same emails, contacts, calendars, notes, reminders, etc. - usually not what you want. But if all have been sharing the same itunes ID, keep it that way, you can have different IDs for itunes and icloud.
If you already have another icloud account, and want to set it up on a device, then go to Settings>icloud, scroll to bottom of screen and tap Delete Account. This only disconnects the device from that account, no data is lost on icloud. Then enter the account ID that you want to use.
To create a new icloud account, go to
http://www.apple.com/icloud/setup/

Which product should I buy? I want to create vintage/retro posters for band and Bar

which product should I buy? I want to create vintage/retro posters for band and Bar

Good day!
Instead of buying right away you may want to avail yourself of the free 30 day trial first to see which program fits your needs.
Photoshop and Photoshop Elements may be worth a try.
If you intend to create more graphic/typographic designs Illustrator may be worth looking into, too.
Someone else may have more/other recommendations, though.
Regards,
Pfaffenbichler

Create Display Authorization Profile for SAP Transaction SPRO (IMG).

Dear All,
In my current implementation project there is an requirement to create display authorization profile for SPRO. I have tried a lot but was not able to do so.
Any one is having an experience in creating display profile for SPRO (IMG) ? If any one has worked on this issue then please guide me.
Thanks,
Avinash

Hi
This is security related question. I am not security expert.
But you can check this, Include the following authorization objects in the profile and assign this profile to the target user.
S_IMG_ACTV
S_PROJECT
S_PROJ_AUT
S_PRO_AUTH
and assign activity = 03 (Display).
Hoipe it helps.
regards
Srinivas

How to create distribution rules group for wbs settlement rules

Hi,
How can I create distribution rules group for WBS element settlement rules ?
For some WBS elements I can see(in view mode(cj03)) distribution groups in settlement rules screen but when I try to edit settlement rules I only see default group.
How can i create/edit those groups ?
Regards,
Rafał

Self answered:
CJIC t-code

Screensaver for iCal and iPhoto? Want to create a central hub for family

I want to create a central hub for the family to view iCal (e.g., daily and upcoming events) and also iPhotos. Is there a screensaver program that will automatically show this stuff on a Mac desktop when not in use?

The only way to do that is to do the lined pages in other software (Word, pages, Pagemaker, etc) and print them to PDF using the send PDF to iPhoto option - see Old Toad's tutorial #19 for more details - http://toadstutorials.info/
LN

Limit Security by Excluding Authorization Groups for S_TABU_DIS

Is it possible to assign security for object S_TABU_DIS by excluding authorization groups in lieu of including all authorization groups for which security is to be assigned.
Thanks,
Barbara

Yes, some fields have cross-object relationships. For org. levels it is much the same.
There are limits to these fields - you can over-ride them or bypass the checks, but it is no guarantee that it will work.
There are many "tools" ouside of PFCG which do this... without respecting the limits.
Do not be surprised if it does not work, or you have perforamce problems, or strange user experiences....
Cheers,
Julius
Edited by: Julius Bussche on Oct 5, 2009 10:53 PM

I want to create a authorization group for cic0 tcode.

Similar Messages

Maybe you are looking for