I want to create a cd on my mac that autolaunches an .html-page after inserting into a pc or a mac. Is that possible?l

I want to create a cd on my mac that autolaunches an .html-page after inserting into a pc or a mac. Is that possible?

Solving this requirement on a modern Windows system is going to be problematic too, as the autorun mechanisms are increasingly being locked down over there, if not by the end-user or the system installer, then by the usual anti-malware tools that are installed.
Given this is one of the most vulnerable populations here in terms of operational security, you'll probably want to target online distribution, or to distribute a signed application that can be installed on the target (akin to a managed system) and that then accesses your data on external storage.  All that app might do is access the disk, verify that the contents of the device are trusted and valid, and launch the browser.
I'd likely target online distribution or pre-loaded distributions and iOS, as that's where all of the older folks I'm dealing with are headed, too.  If not a native app, then maybe a web-app here, and download the contents into the HTML5 local storage.

Similar Messages

  • Impossible to create a transparent background page to insert into an iframe

    Hi,
    I am trying to insert a page created in Muse inside another page by using an iframe in an HTML inclussion. I want it to be transparent so the background of the container page shows thru. The problem is Muse always gives a background color to any page it does, so the iframed page background is no transparent.
    My iframe code is:
    <iframe src="biografia2.html" width="630" height="566" seamless frameborder="0"></iframe>
    And the biografia2 page loads its corresponding CSS file that begins with:
    html
        background: #D9D9D9;
    If after exporting the site I remove these lines in the CSS file, the iframe appears transparent.
    This lines are generated because in the Muse editor, when nothing is selected, so you have the page properties in the toolbar, the last control is the colour of the background of the browser, but you can't set this colour to null, so the page always has a colour. I think this is a bug in Muse that should be corrected.
    Until then, the only solutions I can see are removing the mentioned lines manually after exporting the HTML or creating the iframed page without using Muse.

    Hello,
    In order to achieve this, you need to open your page biografia2.html in Muse and then Right Click and go to the Page properties.
    There in HTML for head section you need to insert the code :
    <style>
    body{
    background:transparent !important;
    </style>
    It will override the styling and the Background will be transparent for that page.
    Hope this helps.
    Regards,
    Sachin

  • SSIS - Script Task creates a DTS var and using Foreach loop, Execute SQL needs to INSERT into table from this DTS var.

    I have a script task written in C# that creates an array of strings "arrayFields" after parsing a text file. It saves the array of strings in a DTS variable.
    Each row in array represents a row is comma separated and is a row that must be inserted into a table. For example,
    X and Z are fields in the table
    X1, X2,....Xn
    Z1,Z2,...Zn
    I am using a Foreach Loop  to grab each row and then  Execute SQL Task to take each row from the array and insert each field per row in a table,
    The SQL is something like,
    INSERT dbo.table values(field1, field2,...fieldn) arrayFields?
    What should this this INSERT look like?

    I guess you implemented
    Shredding a Recordset
    Based on what I understood (correct me if I am wrong) you have difficulties mapping the input parameters, if so here is the guide
    http://www.sqlis.com/sqlis/post/The-Execute-SQL-Task.aspx
    In short it might look like
    INSERT dbo.table  (ColumnA, ColumnB,...) VALUES (?,?...)
    The syntax for the T-SQL INSERT is http://technet.microsoft.com/en-us/library/dd776381%28v=sql.105%29.aspx
    Arthur
    MyBlog
    Twitter

  • I have an upgrade version of logic studio (9.1.1.) which I want to run on an imac with 10.7.4 osx Lion and after a seemingly successful install it's telling me that this version of logic studio isn't supported by my osx...Can someone help me with this?

    I also want to add that I've found the updates to logic pro 9.1.2 thru 9.1.7. and when I download them they tell me they are either not needed or don't seem to actually update anything.  Someone was saying that Logic Studio isn't a fan of Lion and I should install Snow Leopard, complete Logic updates and then re-install Lion.  PLEASE HELP!!!

    Hi there,
    You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
    You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
    Thanks, let me know if the update helps,
    Nathan

  • I want to execute JSP scriplet in onClick function of the button HTML page

    in my JSP page, the code is like this...
    <input type="button" value="xyz" onClick="<% my jsp code%>">
    the jsp code is executing wen the page is loading..
    i want the jsp code is executed wen v click the button..
    can i write like this...if not how should i write.
    plz suggest me...
    Thanking you
    Sorry if i post this in a wrong forum....
    Edited by: Murthy_Srinivas on Jun 5, 2008 10:49 PM

    the jsp code is executing wen the page is loading..
    i want the jsp code is executed wen v click the button..Not possible(in the way you are trying to achieve). JSP codes are processed in the server and only processed data/results are sent to browser which you see in your screen. Browser cannot/willnot execute the jsp code.
    ...if not how should i write.The only way is to make a server call(eg: either submit a form, make a http request using Ajax etc)

  • I want to create and add a new iCloud email address to current apple id

    I've just gotten married and want to create a new iCloud email reflecting my new name, and then add it to my current iCloud account.  Is this possible??

    Welcome to the Apple Community.
    Providing you aren't trying to change you Apple iCloud email address you can make changes at My Apple ID

  • How do you create animation on website i.e. i just want to create a simple moving text in my site.

    I just want to create a moving text or a flashing text in my website using iWeb. HELP!

    See the bgcolor= ?  That's the background color.  In the iWeb color inspector window chose the web safe color palette, and you will see the number codes that correspond to the colors. just type in the numbers you want and that will change the background color.
    Sincerely,  David

  • I want to create a new apple id with another email, It says email already in use...

    I want to create a new apple id with another email, It says email already in use, but there is no account with that email( i use it for facetime and get apple offers) What do i do?

    You can check to see if it is associated with one of your IDs by following this: http://support.apple.com/kb/HT5625, and entering the email address at step 2 to see if it finds an ID owned by you.  If it doesn't, contact the Apple account security team and have them check into it by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Apple ID account security.

  • How to create a group of some of the items of a page programatically.

    Hi,
    I am able to create a group of all Items of a page successfully. But I want to create a group of some of the item of the page.
    Below is my code snape:
    InterfacePtr<ICommand> groupItemsCmd(CmdUtils::CreateCommand(kGroupCmdBoss));
    ASSERT(groupItemsCmd);
    if (!groupItemsCmd) { 
    return;}
    InterfacePtr<IGroupCmdData> groupCmdData ( groupItemsCmd, UseDefaultIID());
    groupCmdData->Set(itemsOnPageNew);
    ErrorCode status = CmdUtils::ProcessCommand(groupItemsCmd);
    if (status != kSuccess){ASSERT_FAIL(
    "kGroupCmdBoss failed"); 
    break;}
    So how I can create UDList of some of the control of the page .
    Any help will be appreciable.
    Thanks,

    I have done below code to get tag name but xmlReferenceData object is blank so tagname is blank.
    UIDRef pageItemRef=itemsOnPage->GetRef(pageItemIndex);
    InterfacePtr<IXMLReferenceData> xmlReferenceData(pageItemRef, DefaultIID());
    ASSERT(xmlReferenceData);
    if 
    (!xmlReferenceData) {
    break 
    XMLReference ref = xmlReferenceData->GetReference();
    PMString tagname=this->AsString(ref);

  • How to create dynamic HTML page using PL/SQL code in APEX.

    hello,
    I am woking on one APEX application in which i want to create one dynamic HTML page on button press using PL/SQL code.
    Thanks

    It is possible to create HTML page with dynamic content. One way would be creating hidden field (e.g. P1_HTML on page 1) with dynamic HTML and on button click you redirect to page 2 and pass P1_HTML item value to item P2_HTML on page 2. On page you must have PL/SQL region. You can then render your dynamic HTML with code:
    htp.p(:P2_HTML);
    Don use APEX URL for passing HTML value. Problem and solution is described here: http://blog.trent-schafer.com/2011/04/03/dont-pass-string-parameters-in-the-url-in-apex-its-a-bad-idea/
    Edited by: MiroMas on 3.2.2012 3:20

  • When one or more family members who have been sharing one iTunes account wants to create their own iTunes account can they each upload the music/apps from the shared iTunes on their devices to the new iTunes account?

    When one or more family members who have been sharing one iTunes account wants to create their own iTunes account can they each upload the music/apps from the shared iTunes on their devices to the new iTunes account? 

    Yes. I would clarify your statement about the "shared" iTunes Library though. If you want each iOS device to have its own music library, you should create separate user accounts for them. Read:
    iTunes: How to share music between different accounts on a single computer
    How to use multiple iPods, iPads, or iPhones with one computer

  • I want to create a new itunes account for myself and leave the current one for my wife. Is that possible?

    Ok. My wife uses itunes for her work and she has asked me to open my own account without erasing the one we currently have so that our music can be seperate. I have my own pc and sync to my own itunes program but our purchases still download to the same account and the money comes from the same account. Can I open a new account and not lose everything? Thanks!

    I hope this isn't too wordy but I want to be as clear and explicit as I can for you.
    You can't transfer purchases from one account to another account. Apple doesn't allow it.
    You can continue to use your daughter's Apple ID in order to continue to use the apps that you purchased with her ID and you will need to use her ID and password any time that you want to update those apps. What you do want to avoid is having to download any of those purchased apps again on any other devices - if you create a new Apple ID.
    If you create a new ID and then you sign into her ID in order to download a previous purchase-  you will lock yourself out of the new ID for 90 days and there is nothing that you can do about it. So as long as you do NOT download any past purchases with her ID - you will not lock yourself out of the new ID. So you can keep using the apps that were bought with her ID, you can also update those apps using her ID (you have to sign into her account in Settings>Store) but you can't download past purchases without messing things up with your new ID.
    When you download a past purchase with a different ID - you associate that device with the different ID for 90 days. This is one way that Apple hopes to cut down on pirating of apps - friends using other friends IDs in order to download apps without patting for them.
    This explains it in a little more detail.
    http://support.apple.com/kb/ht4627
    The bottom line is that you can create a new ID, still use her ID - judiciously - but you really want to avoid downloading past purchases with her ID. Transfer all of those purchases into iTunes so that if something happens and you need the purchased content again, you can just sync it again rather than downloading it.
    This explains transferring purchases.
    http://support.apple.com/kb/HT1848

  • My friend wanted to create a new iCloud account that was different to  her iTunes and app one when she deleted her iCloud account that was the same as her iTunes it won't let her log into her iTunes one now

    My friend wanted to create a new iCloud account that was different to  her iTunes and app one when she deleted her iCloud account that was the same as her iTunes it won't let her log into her iTunes one now what can I do to fix it she has paid or apps and songs and of she makes another account everything will be lost.
    Need help please :) thanks

    Ah thanks Razmee however there is NO option to delete the iCloud account in settings!

  • So I want to create my own IRC client...

    I've wanted to make my own IRC client for a long time now. As soon as I switched from winfailure a few months ago (I think nearly a year now! ), actually.
    As time went by I've slowly, begrudgingly gotten used to irssi, but with gritted teeth all the same. On winfailure, I used HydraIRC, and while this application was quite good, its supposedly open source license wasn't free as in free speech, only as in free beer. So while the code was open, it was only opened such that the code couldn't be used in other projects. Stab.
    Anyway, I used this client for the better part of a year, and while it lacked quite a few things that would have probably turned others away like the complete lack of a scripting engine, it did what I wanted pretty well, and set an operational standard, if you will, that I got used to and have not found anywhere else. Yet.
    So I want to recreate the standard I picked up on but for POSIX platforms (except for cygwin), and introduce some features of my own too. I simply don't know where to start, however.
    Note that the subject says "create", not "write" - after asking around a bit in IRC ##linux recommended I try taking two IRC clients that have the features I want and merging their codebases. I've never done something like this before but I think it'd probably be fairly interesting, if not trying.
    So, I'll list the features I'm looking for, and perhaps you can give me some suggestions on 1) how I'd either implement this myself or 2) a client with X feature already coded in. Thanks.
    The features I'm looking for:
    - Code Simplicity: This is the most important, to me, in the case of using others' code. Complex code (just look at rxvt if you want complex code) will just confuse and down-hearten me and make me run away.
    - A network-oriented model: I want a client with a daemon, or server, that connects to my networks and performs most "heavyweight" takes, and a client, which just handles display. Quassel does this to an extent but is horribly underdeveloped and I don't have a system powerful enough to handle running Qt on a long-term basis (since I already tend to use GTK apps). I also don't know C++.
    - Multiple clients: This is the second most important. I really need this one. I want to be able to have a "main" client that can connect to the server and manage general tasks, and a "light" text-based, console-driven client that connects and can be run over ssh, for example. Quassel completely falls apart here because it uses KDE's network-IPC libraries to transfer data from the server to the client, which a quick check with Wireshark showed to be binary. And I wouldn't want my "lite" client to require KDE, or at least KDE's libraries - that'd just be majorly weird.
    - Speed: I want the client to be fast and responsive at all times, even on slower systems, and even when I'm connected to a lot of channels.
    - Scriptability: It doesn't need to be complex, like Perl's library that applications can bind in. That's overmuch IMHO and, most importantly, slow.
    I don't think one particular client meets those needs, but a few of you will probably shout "xchat!" Well, X-Chat is... not my thing. If irssi could be considered very far away from HydraIRC in terms of operation, X-Chat is the same distance away twice over. It doesn't operate the same way at all.
    So, now that I've loosely explained the features I want, let me now explain another thing I want to be able to do.
    Despite having hardware in dire need of upgrading right now (these systems aren't nearly that bad, but Firefox tends to eat my 512MB of RAM up pretty quickly, and I recently found all the PCs this house has in it 99% likely can't use DDR2 RAM, which isn't too good), I hope and believe that one day I'll upgrade to considerably better equipment with extensive graphics support. With this newer hardware I hope to create a new kind of UI model with animation integrated into the look-and-feel model of the UI the same way images are used for the same purpose today, GPLv3 license it so corporations can't steal it and use it in their products, and then bind it into my IRC client.
    However, I want to start now, before I upgrade. With this in mind, I don't know whether I should make my own GUI toolkit, or use an existing toolkit now and rewrite half the codebase later to support my own graphics and animations. I'm not very good at making things that are programmatically extensible and flexible, so I don't really know what to do here. Simple hand-rolled toolkits such as dialogs with some text and a button can be managed in under ~250 lines of code, but anything bigger, and, well... you get stuff like GTK and KDE, whose toolkit libraries in total are both on the order of over a couple of MBs each, and have been in development for years, and continue to evolve rapidly today. If you're careful, you end up with FLTK, which I don't like the look of at all.
    In addition to that, I want my client to be fast, even on slower computers. Right now, I have a 3-screen setup, with each screen being driven by a separate PC. The one on the right - the one I'd be putting my IRC client on - is a 450MHz P3 with 320MB of RAM. It runs X on a 4MB VGA card at 800x600. This is where I currently run an irssi session over ssh and screen. To give you an idea of the graphical power of this machine, antialiased Xft fonts with urxvt take 0.15 seconds to "scroll" when I say something in IRC. However, it's a capable PC if I harness its capability right, and is where I'd target my IRC client. And I dislike seeing my fonts redraw - I dislike seeing anything redraw, for that matter.
    You might think I'm crazy, writing an IRC client for one of the slowest PCs in the house that works, that I in future want to extend to use a graphics layer that I hope to develop on a server-class Nehalem workstation with an insane amount of RAM and a pair of SLI'd GTX 280s in it.
    I don't think I'm crazy. I'm using what I have to give back to the open source community, and using what I consider to be an cunning operational model to do it: back when the 450MHz P3 I spoke of was the only "main" working PC I had, I designed, in none other than Visual Basic 1.0, a media center UI. On Windows 98. In 2006. And, you know what, despite the fact that the animations it used were pretty basic, it actually looked really, really good. And why was this? Because I used software designed for 486DX2s running at 33MHz with 4 or 6MB of RAM, on a P3, with 128MB of RAM (yes, I've upgraded it since), clocked at 450MHz. The result? Blinding, optimized, speed. You really should try the older versions of VB sometime - I managed to score a copy of VB 2.0 which is legal to distribute because its "Make EXE" (ie compile) function is crippled. Email me and I'll mail you a copy - it's completely legal.
    In the same manner, if I design this IRC client and carefully construct it so its client/server model works capably on my two PCs, my server (a machine not unlike the P3 I've been discussing - my server just has more hard disks in it, a 50MHz faster processor, runs my left-hand display and my IRC network) and my old desktop (the 450MHz box I've mentioned so much), when I finally bring it over to my new computer it'll be so fast that it'll be as if the computer is registering keypresses before I even type them. And that's the kind of performance I want to couple with shinyyy graphics.
    Sorry this sounded halfway between a motivational speech, a request for help, and a coder's dilemma. lol
    -dav7

    Bit of an update: Varreon emailed me regarding VB 2.0 and we had a bit of a discussion regarding the language I planned to use.
    He said it would be fine to post our conversation, so here's how it panned out:
    Varreon wrote:...What language were you planning on writing your client in? I've written an irc bot in c++, and I'll upload my source code if you're interested in looking through it.
    dav7 wrote:
    Well, I'm not all that sure what language I want to use just yet.
    I know I want it to be extensible, so I could either use a high-level, extensible but slow scripting language to power the client as a whole, or I could go down a path already travelled, proved extremely successful and in my opinion cleaner, and embed a scripting language, which would negate the requirement for a high-level language but still facilitate customization.
    All the same, I'm not really all that sure what language to use.
    C++ isn't really my thing - on my current computers, g++ takes maybe 3 seconds to compile the smallest of source files, and while that isn't *really * all that long, I'm not all that patient. As it stands I consider /gcc/ too slow for my preferences and use tcc instead - you might like to try it if you're on a 32-bit system.
    I'll probably move to C++ when I get a new PC, but for now, all I really find fast enough for my liking is C, and I'm a little concerned that C might be a little too low-level for what I want to design here - beyond scriptability, I want the client itself to be easily extended in various directions. Of course the client will only appeal to a specific market (in an open source sense), but I do want it to feel organic and something that can be extended in as many directions as possible. So C probably won't be the language I use, and since C++ is slow to compile, it's probably going to be off the list as well.
    All the same, I'm not concerned about speed in the irrational way I have been in the past, but at the same time I do need to be careful in my thinking regardless of the language I use since don't want a client that lags to death. A good example of a slow program is SciTE - the text editor I'm typing this in, Geany, uses the same edit control it uses (Scintilla, which is written in C++, AFAIK), and while this component has a good degree of editorial control, scrolling with the scroll wheel can be slow. Also, when I recently tried to run SciTE on an old laptop I found on the side of the road (AMD K-6, 350MHz, 32MB RAM), I discovered that just *typing* would lag the system horribly - typing about 15 keystrokes quickly resulted in a lag of about 6 seconds after which what I typed would appear all at once. Typing single keys - slowly - resulted in a delay of around 0.20-0.39ms (guessed).
    Regarding scripting, I had my eyes on one embeddable language in particular but I forgot what it was called, so I headed to Wikipedia for a quick hunt-down session for it and managed to discover Falcon, which appears to use a VM but is at the same time the same insanely fast because it uses a C/C++-only policy for its modules. It also advertises itself as a scripting engine "ready to empower mission-critical multithreaded applications" so I'm considering Falcon to be a possible engine to integrate, and on a slightly long shot, even the language I might end up using. I also think hunting the first language I considered down and embedding that might be a nice idea, and I also might embed Perl. I'd love to be able to embed Ruby.
    Overall however, I do need to contain my enthusiasm - the desire to throw in multiple scripting engines, awe-inspiring compositing graphics layers, and support for multiple protocols isn't such a bad idea, but if not controlled will result in serious featuritis, which when combined with a verbose, low-level language will only result in me throwing myself at the project too hard "to get it done", with proven disastrous results.
    -dav7
    [ Note, there's an update in a follow-up post below this one that affects the information you see here - just so you know ]
    I've done some consideration since that email and it's possible that C++ might be able to be brought onto the table. This was mostly inspired by the good outcome I had with writing a couple of modules for InspIRCd, which uses C++, compared to my previous attempt when I knew no C.
    The main thing I'm a little indecisive about at the moment is the toolkit; I want something that's fast but doesn't look all that bad; FLTK is, as I've said previously, not something I like the look of - it does appear to be somewhat themable but it's impossible to escape the fact that it values speed over shininess, and while this is excellent for my current target, I don't want to develop something that relies on it so heavily that it's next to impossible to port to whatever I end up using when it's time to get the graphics in, such as a UI model on top of an OpenGL canvas.
    The second thing I'm unsure of is what scripting language I should use. I've done quite a bit of looking around - mostly to try and find that language I mentioned that I lost - and found quite a lot of possibilities, and even discovered that with some work (well, a lot of work, admittedly) it's even possible to embed Ruby into C++, and have Ruby call user-defined C++ functions and so on. It's not an official part of the project, but someone managed it nonetheless.
    It seems to be possible to embed popular languages such as Perl, Python, Tcl, Lua, etc, but then there are lesser-known languages designed for embedding, such as Nesla, AngelScript and the like (such as that language I can't find, heh). And of course I could also embed a JavaScript engine, which would probably be very odd but all the same quite an experience.
    Then there's Falcon, which appears to be a pretty good language in general but doesn't appear to have all that many modules available for it just yet, so doesn't seem to suit my purposes.
    So, summing up:
    - I don't know how I should develop this in terms of graphics - should I wait for a new PC and just use SDL or whatever I'm going to use, use a toolkit and either rewrite half of everything at some other point or juggle two display methods, or what?
    - The number of scripting languages out there is mind-boggling. To me, it's not what syntax the language uses, or whether it's statically or dynamically typed, or how readable it is, it's #1 how fast it is, and #2 how suitable it would be in the context of an IRC client - string manipulation (even on every incoming and/or outgoing message), user interface control, and so on.
    -dav7
    Last edited by dav7 (2009-02-16 09:25:49)

  • How do I create a new account for an iPod that is on an existing account?  My brother and I have shared an account for five years, and now that I'm moving out, I want to create my own account but still want to be able to play the music I've purchased.

    My brother and I have shared an account for five years, and now that I'm moving out, I want to create my own separate account but still want to be able to play the music I've purchased over five years. 

    In order to continue to play and sync the music you purchased with your old account, you'll need to authorize your new computer/iTunes library to do so.  You can do this by choosing Store -> Authorize This Computer and then entering in your old account credentials.
    That's all you should need to.  Then just create your own account and start purchasing and using it the same you have with the old one.
    B-rock

Maybe you are looking for