I want to create a report with more than 64 column's.

I want to create a report with more than 64 column's. I have generated Query the XML.When I tried to create a template for the report.I have Inserted the colum's Wizard and finish it throughing error message. "you cannot create atable with more that 63 coloum's "

Hi ,
Can u Check the below thread
More than 63 columns in rtf template

Similar Messages

DIAdem report with more than 3 signals

Hi everybody!
How can I create a report with more than 3 signals as input. The DIAdem report accepts only 3 signals as Input.
In my opinion this is an very easy question but I could not solve it during a few hours!
Thanks in advance,
Manuel123

Thank you for your answer!
But I have still some problems.
According to your help I have connected eight of the signal-boxes to the connector. After that it is possible to connect up to eight signals to this sub-vi. Great!
But now I want show all these signals in the Diadem report, for this reason I created a new report-layout (see attachment) and wired the path of it to the "report layout file" - input. Unfortunately Diadem uses still a layout with just two signals and even if I open my own layout in Diadem there are only two data-lines listed in the "Data Portal: Internal Data" - panel.
Where is my failure?
Regards,
Manuel123
Message Edited by Manuel123 on 08-29-2007 10:00 AM
Message Edited by Manuel123 on 08-29-2007 10:01 AM
Attachments:
man.TDR.zip ‏11 KB

Report with more than 500 rows

I have a report with more than 500 rows and i donot know the total number of records returned from sql query before hand. Is there any way to dynamically set the MAX ROW COUNT in the report - layout and pagination.
Thanks a lot
Sudha

Hi All,
The main problem for the scenario is that....Say you first create a SQL query based report with setting the row per page 15 .Now after the region is displayed if u go through the report attributes of the page and change the no. of row per page and apply changes the same will not going to reflect in the report display page.
For ur case just select the no. of page u want to show while creating SQL Query based report region say 1000 and after creating the region go to the report attributes -> Layout and Pagination -> Max Row Count : 9000 (say).
I have solved the problem after creating 700 rows and the all rows displayed in the page fine........If u have further issue plz revert back to me.
Thats solve ur problem i think.....
Thanks n Regards,
ROSY

Report with more than 30 columns

XML Pub Gurus,
I have a requirement where I need to create a table layout with proper spacing for more than 30 columns and I asked this question in Open World XML Pub team and they responded to my question as "The page size in word has to be increased to allow to add those many columns". I was satisfied with the answer without knowing that Word will not allow more than 22" long in landscape. So, I am puzzled with the answer in Open World.
So, could somebody please give me guide lines to create this type of report for more than 30 Columns. This is very common requirement for us to report some of the stuff from the db.
Thanks in advance
Ram G

What do you want your final destination format to be? I'm thinking you'll probably want to go out to HTML or Excel. I would think that would be the only place where you could read and use a report with more than 30 columns.
Here's an idea if you want to go to excel and if you are using the 10.1.3.2 Enterprise (standalone) version.
1. Create your query with as many columns as you want.
2. Don't create a layout at all
3. Launch Excel Analyzer.
4. From within Excel, build your report based off the downloaded data (for example add a pivot table).
5. Upload your excel Analyzer template back to the server
This template can now be scheduled and delivered like normal templates or updated with current data directly from within Excel.

Hello. I have an iPad2, and iMovie software. My main problem, for the moment, is the length of the videos: I can´t create a video with more than 56 seconds. When I try, the app shuts off... Can anyone help me?

Hello. I have an iPad2, and iMovie software. My main problem, for the moment, is the length of the videos: I can´t create a video with more than 56 seconds. When I try, the app shuts off... Can anyone help me?

Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
Take it to whoever replaced the screen and see if they can help you.
iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked.

Not able to create a table with more than 64 fields in dictionary

Hi,
I have created a java dictionary in Netweaver Developer studio. I have to create a table with more than 64 fields in it. I was able to create the table in dictionary, but when i tried to build it, I am getting an error message as "more than 64 fields are not allowed". If i create the table with 64 fields or below 64 fields, i can build the dictionary and deploy it.
That is, when i create a table with more than 64 fieds, I am not able to compile the dictionary, But if i reduce the fields to 64 or below, i can compile the dictionary.
Kindly help me to solve the problem.
Regards,
Sudheesh

Hi,
Sudheesh,as far as I am aware creating of fields in the table actually depends on the total width of table that can be used for various Vendors.
So I actually tried out creating a table with too many fields,and I am reproducing the errors which I have obtained -
Error Dictionary Generation: DB2:checkWidth TMP_1: total width of table (198198 bytes) greater than allowed maximum (32696 bytes) TMP_1.dtdbtable TestDictionary/src/packages
Error Dictionary Generation: DB4:Table TMP_1: fixed length: 198366 (32767). TMP_1.dtdbtable TestDictionary/src/packages
Error Dictionary Generation: DB6:checkWidth TMP_1: total width of table (297200) including row overhead is greater than the allowed maximum for 16K tablespaces . TMP_1.dtdbtable TestDictionary/src/packages
Error Dictionary Generation: MSSQL:checkWidth TMP_1: total width(198215) greater than allowed maximum (8060) TMP_1.dtdbtable TestDictionary/src/packages
Error Dictionary Generation: SAPDB:checkWidth TMP_1: total width(198297) greater than allowed maximum (8088) TMP_1.dtdbtable TestDictionary/src/packages
Error Dictionary Generation: Table TMP_1 is not generated TMP_1.dtdbtable TestDictionary/src/packages 
I hope you can understand what the errors state.I am trying to create a table whose total width(sum of width all columns) is greater than the maximum allowed for various Vendors,such as DB2,MSSQL,SAPDB etc.
I hope this answer helps you create your table suitably
Regards,
Harish
(Please award points if this answer has been usefull)

Reports with more than 100 columns

I am using Apex 3.2. I am using a classic report with more than 100 columns. So to use the custom heading in the report, I exported the page,did modification in exported sql file and imported back.
But when I am passing the parameters from a input screen for the first time either it is showing the all data avilable in the database or with only header. If I do the refresh in input screen and try it then it is working as intended. I am updating at the below loaction of the page.Let me know if I have to update anything more in the sql file.
declare
s varchar2(32767) := null;
begin
s := null;
wwv_flow_api.create_report_columns (
p_id=> 200100535534034253 + wwv_flow_api.g_id_offset,
p_region_id=> 2003453533453 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_query_column_id=> 157,
p_form_element_id=> null,
p_column_alias=> 'XYZ',
p_column_display_sequence=> 157,
p_column_heading=> 'XYZ 123',
p_column_alignment=>'LEFT',
p_disable_sort_column=>'Y',
p_sum_column=> 'N',
p_hidden_column=> 'N',
p_display_as=>'WITHOUT_MODIFICATION',
p_pk_col_source=> s,
p_column_comment=>'');
end;
/

Hi,
Its just a general thought and I realize you know your application and user community better I do, but do you think your users are going to be very happy when they are presented with a report with more than a hundred columns? Have you considered maybe presenting the data in some sort of rolled up form from which the user can then drill down to the data they are particularly interested in. Also, I'm sure your LAN administrator would be happy not to see 100+ column by x number row reports being regularly shipped across the network.
Also, 100+ column reports suggests tables with 100+ columns which are probably not designed in a very relationally compliant way. I find that good DB design usually results in applications that have to make less compromises, such as hacking export files in order to fool the API into making ridiculous, unsupported and unsupportable compromises.
Just a thought..................
Regards
Andre

Can I create a table with more than 40 columns ?

Hello,
I need to organize my work with a table and need about 66 columns. I am not very good with Numbers but I know a little bit of Pages. I cannot find a way to create a table with more than 40 columns... Is it hopeless ? (Pages '08 v. 3.0.3)
Thank you all

It's never too late to try to teach users that the Search feature is not only for helpers.
The number of columns allowed in Numbers is not a relevant value when the question is about Pages '08 tables.
I tried to copy a 256 columns Numbers table into a Pages '09 document.
I didn't got a table but values separated by TABs.
I tried to convert this text range in a table and got this clear message :
If I remember well, in Pages '08, the limit is 40 columns.
It seems that you are a specialist of inaccurate responses, but I'm not a moderator so I'm not allowed to urtge you to double check what you wrote before posting.
Yvan KOENIG (VALLAURIS, France) vendredi 29 avril 2011 14:57:58
Please :
Search for questions similar to your own before submitting them to the community

How to create new user with more than one default folder

hi
A new user created in OCS has only one default folder(Inbox).
I want to create new user with customized default folder.
for example:
a new user has more than one default folder(Inbox,Outbox,Draft,Dustbin...)
And also I want to automaticly enable the functions:
When sending messages, place a copy in Outbox
Keep message drafts in Draft
Move deleted messages to Dustbin
who know that?
thanks

The same reason that Apple and 3rd Party vendors put multi-size templates in one file I expect. I am trying to construct an in-house standard template for use in our company, and it is easier to manage if there is only one file to send to people rather than many - both initially and for subsequent edits / updates to the template.
Of course it would be possible to create several templates (one for each size). But since it is clear that templates can be combined, it appears sensible to do this - unless the doing of it is horridly complicated

How can we create a table with more than 64 fields in the default DB?

Dear sirs,
I am taking part in the process of migrating a J2ee application from JBoss to SAP Server. I have imported the ejb project.
I have an entity bean with 79 CMP fields. i have created the bean and created the table for the same also. but when i tried to build the dictionary, i am getting an error message as given below,
"Dictionary Generation: DB2:checkNumberOfColumns (primary key of table IMP_MANDANT): number of columns (79) greater than allowed maximum (64) IMP_MANDANT.dtdbtable MyAtlasDictionary/src/packages"
Is it mean that we can not create tables with fields more than 64?
How can i create tables with more than 64 fields?
Kindly help,
Thankyou,
Sudheesh...

Hi,
I found a link in the help site which says its 1024 (without key 1023).
http://help.sap.com/saphelp_nw04s/helpdata/en/f6/069940ccd42a54e10000000a1550b0/content.htm
Not sure about any limit of 64 columns.
Regards,
S.Divakar

Creating Interactive Files with more than one URL

Hello, here's my problem: I want to create more than one button instance that go to different URL address's. From the Adobe Video Workshop, I got the code:
interactive_test.addEventListener(MouseEvent.CLICK, buttonClickHandler);
function buttonClickHandler(event:MouseEvent):void {
                navigateToURL(new URLRequest("http://www.adobe.com"));
This works fine with one button instance. When I copy and paste the code for another button instance, i.e:
butn1.addEventListener(MouseEvent.CLICK, buttonClickHandler);
function buttonClickHandler(event:MouseEvent):void {
                navigateToURL(new URLRequest("http://www.adobe.com"));
butn2.addEventListener(MouseEvent.CLICK, buttonClickHandler);
function buttonClickHandler(event:MouseEvent):void {
                navigateToURL(new URLRequest("http://www.adobe.com"));
I get 1021 duplicate function error. I think I understand in priciple what's wrong but don't know how to fix it. MyI knowledge of Action Script 3 is zero. What I need is sample code that works that I could copy and paste, with appropriate changes.
Thanks in advance for your help, Richard

use different function names or flash won't know which function to use:
butn1.addEventListener(MouseEvent.CLICK, buttonClickHandler1);
function buttonClickHandler1(event:MouseEvent):void {
                navigateToURL(new URLRequest("http://www.adobe.com"));
butn2.addEventListener(MouseEvent.CLICK, buttonClickHandler2);
function buttonClickHandler2(event:MouseEvent):void {
                navigateToURL(new URLRequest("http://www.adobe.com"));

How to create a theme with more than one master-slide size defined?

I would like to create a Keynote theme that has more than one size of page defined - for example one for on-screen show, and one for printing.
I noticed that the stock themes, and those from theme vendors, come with multiple page dimensions, and that the master slide layouts for the 'same' master slide appear to be designed differently for the different sizes.
How do I create themes like this in Keynote? I cannot find any information about this in the Keynote manual. I have worked out how to change the master slide dimensions, but not how to tell Keynote that the layout I've created for a slide is for a particular set of dimensions. So when I look at my theme in the theme browser, I only see the dimensions I had selected last time I saved my theme showing.
Any help most appreciated.

The same reason that Apple and 3rd Party vendors put multi-size templates in one file I expect. I am trying to construct an in-house standard template for use in our company, and it is easier to manage if there is only one file to send to people rather than many - both initially and for subsequent edits / updates to the template.
Of course it would be possible to create several templates (one for each size). But since it is clear that templates can be combined, it appears sensible to do this - unless the doing of it is horridly complicated

Report with more than 600 kb image - BO Server getting Out Of memory Error

Hi,
   We have a report which displays images and size is above 600 KB.We are getting an "Out Of memory" Error while previewing this report in Business Object Server.
In another situation we tried by giving a dynamic path to the OLE object, but the report is not showing error. We are not able to view the image whose size is more than 600KB
Notes: 1. Image is stored as a BLOB in Oracle Database
           2. Connection used inside the report is OLEDB
           3. UNIX Environment
Regards,
Sathish

Please re-post if this is still an issue to the Business Objects Forum or if you have a valid support contract create a case on line.

How to create one master with more than one detail

Hi
I am using jdev 11.1.2.1.0
I want to add more than one detail view object under one master view object in application module
Please solve this asap
Thanks

Hi Frank
I have 5 view objects (Suppose A,B,C,D,E) and I have created view links between them like
A->B
A->C
A->D
A->E
Then I am shuttling views in Application module (In Data model Tab) to create A as master and rest as details.
But it is not creating as i want.
I add new instance of view object independently.
Please solve this
Thanks
Edited by: 7668489779 on ३० अप्रैल, २०१२ ४:०७ अपराह्न

Oci error in report 6i in reports with more than 1000 pages

hi
in a report that has more than 1000 page output , run in report 6i while formatting pages an error occurs:
OCI error.==>SELECT NAME,
what this means?
please help me.
CAROL.

in reports that i know number of pages for example 1100 pageswhile formatting pages 150-200 this error occurs.
Did you get the error if total report pages < 1100?
indeed in another report with about 3500 pages output this error not occurs. Any diff. of setting/limits etc. between your two reports?

I want to create a report with more than 64 column's.

Similar Messages

Maybe you are looking for