I want to create an iPad app with multiple issues of the same magazine inside it
I want to create a digital magazine for iPad. I know with Digital Publishing Suite I can create apps for iPad.
But there is a problem. Is not clear in the website if with the Single Edition I can create an app that contains all issues of the magazine, or if I have to create a new app for each issue of the magazine that I want to publish.
Could you please get me out of doubt?
Please, I need a quick answer. Thanks in advance!
This should help:
http://boblevine.us/digital-publishing-suite-101-single-edition-vs-multi-folio-apps/
Similar Messages
-
How can I share Quicken and other apps with another user on the same iMac?
I would like to share some apps including Quicken with anoter user on the same iMac. I have put the Quicken app and the .QFX file in /usrs/share and changed the permissions to R/W on both files but when I log in as the other user and run Quicken it does not use the .QFX file and instead comes up with no accounts.
The Quicken app. should be in the Applications folder at the root of Macintosh HD. It's accessible to all users from there.
To share a file, (this from Finder Help menu)
"Sharing files with others who use your computer
You can share files with others who use your computer by placing the files in the Public folder in your home folder. Anyone with an account on your computer can read or copy the items you put in your Public folder (except for your Drop Box folder, which only you can open).
To share files using your Public folder:
Copy the files you want to share into your Public folder, inside your home folder.
To give a copy of a file directly to another person, copy it to their Drop Box folder (inside their Public folder), where only they can see it."
When opening a file just double-click the file - it will open the application automatically. -
How do I share not only my music but also my apps with other users on the same computer?
I've searched around and this one link keeps comming up:
http://support.apple.com/kb/HT1203
That link only tells me how share with music I want apps and everything else shared between multiple users on the same windows computer.
Thanks.Thank you Joe - I tried this but it's only showing a teensy amount of music - the stuff on the second users account as opposed to the giagntic library on the 'main' account. I actually went to a Genius Bar and they said that apple doesn't really want you to share music between accounts - parents don't want to hear their kids music etc. Which seemed strange, but it might be the case sadly Thanks anyway!
-
Installing a LOB App for Multiple Accounts On The Same Surface Device
Hi,
When installing apps to iOS & Android there is no concept of a local user account, and an app can only be installed once. For Windows devices, a single device can have multiple accounts. Those accounts can be local or domain and have administrator privileges
or not.
We are planning to use the Device Enrollment Manager concept in Intune to enroll approximately 200 non-domain joined devices. Each device will have two local accounts - one in English and one in French. We have a LOB Windows App that works in both
languages. We do not want the local accounts with the App to have administrative permission.
It seems you need local administrator permission to enroll the device. If I then install the app from this account, it works. However, I need the app installed on the local English and local French account.
When I log locally into the device using a standard account and log into the Company Portal, it shows the app as installed. It is not, however, installed for that user and is not accessible. Note that I'm using the same Intune account. It is only available
to the local administrator account. The only option I have is 'Re-Install'. When I select that, nothing happens - it is stuck in the "Installing..." state.
If I only enroll the device using the local administrator account and then log into the local standard account to install the app, it doesn't show as installed. When I choose to install it, it gets stuck on Installing.
I'm missing something here...
Is it possible to install an App from Intune more than once on a Surface device? Do the Intune accounts need to be unique per-install? Is it possible to install the app without local administrator permission?
Thank you!
-jdAn update. If I:
Enroll a Windows Surface using a local admin account
Request to install an app from a local standard account it appears stuck on Installing...
Log back in as the local admin account and wait, the app appears.
Questions:
Can the same app be installed into multiple local accounts on the same device? It doesn't look like it.
Is the local account used when the device is enrolled the only local account that will install Intune apps?
-jd -
Timesten replication with multiple interfaces sharing the same hostname
Hi,
we have in our environment two Sun T2000 nodes, running SunOS 5.10 and hosting a TT server currently in Release 7.0.5.9.0, replicated between each other.
I would like to have some more information on the behavior of the replication w.r.t. network reliability when using two interfaces associated to the same hostname, the one used to define the replication element.
To make an example we have our nodes sharing this common /etc/hosts elements:
151.98.227.5 TBMAS10df2 TBMAS10df2-10 TBMAS10df2-ttrep
151.98.226.5 TBMAS10df2 TBMAS10df2-01 TBMAS10df2-ttrep
151.98.227.4 TBMAS9df1 TBMAS9df1-10 TBMAS9df1-ttrep
151.98.226.4 TBMAS9df1 TBMAS9df1-01 TBMAS9df1-ttrep
with the following element defined for replication:
ALTER REPLICATION REPLSCHEME
ADD ELEMENT HDF_GNP_CDPN_1 TABLE HDF_GNP_CDPN
CHECK CONFLICTS BY ROW TIMESTAMP
COLUMN ConflictResTimeStamp
REPORT TO '/sn/sps/HDF620/datamodel/tt41dataConflict.rpt'
MASTER tt41data ON "TBMAS9df1-ttrep"
SUBSCRIBER tt41data ON "TBMAS10df2-ttrep"
RETURN RECEIPT BY REQUEST
ADD ELEMENT HDF_GNP_CDPN_2 TABLE HDF_GNP_CDPN
CHECK CONFLICTS BY ROW TIMESTAMP
COLUMN ConflictResTimeStamp
REPORT TO '/sn/sps/HDF620/datamodel/tt41dataConflict.rpt'
MASTER tt41data ON "TBMAS10df2-ttrep"
SUBSCRIBER tt41data ON "TBMAS9df1-ttrep"
RETURN RECEIPT BY REQUEST;
On this subject moving from 6.0.x to 7.0.x there has been some changes I would like to better understand.
6.0.x reported in the documentation for Unix systems:
If a host contains multiple network interfaces (with different IP addresses),
TimesTen replication tries to connect to the IP addresses in the same order as
returned by the gethostbyname call. It will try to connect using the first address;
if a connection cannot be established, it tries the remaining addresses in order
until a connection is established.
Now On Solaris I don't know how to let gethostbyname return more than one interface (the documention notes at this point:
If you have multiple network interface cards (NICs), be sure that “multi
on” is specified in the /etc/host.conf file. Otherwise, gethostbyname will not
return multiple addresses).
But I understand this could be valid for Linux based systems not for Solaris.
Now if I properly understand the above, how was the 6.0.x able to realize the first interface in the list (using the same -ttrep hostname) was down and use the other, if gethostbyname was reporting only a single entry ?
Once upgraded to 7.0.x we realized the ADD ROUTE option was added to teach TT how to use different interfaces associated to the same hostname. In our environment we did not include this clause, but still the replication was working fine regardless of which interface we were bringing down.
My both questions in the end lead to the same doubt on which is the algorithm used by TT to reach the replicated node w.r.t. entries in the /etc/hosts.
Looking at the nodes I can see that by default both routes are being used:
TBMAS10df2:/-# netstat -an|grep "151.98.227."
151.98.225.104.45312 151.98.227.4.14000 1049792 0 1049800 0 ESTABLISHED
151.98.227.5.14005 151.98.227.4.47307 1049792 0 1049800 0 ESTABLISHED
151.98.227.5.14005 151.98.227.4.48230 1049792 0 1049800 0 ESTABLISHED
151.98.227.5.46050 151.98.227.4.14005 1049792 0 1049800 0 ESTABLISHED
TBMAS10df2:/-# netstat -an|grep "151.98.226."
151.98.226.5.14000 151.98.226.4.47699 1049792 0 1049800 0 ESTABLISHED
151.98.226.5.14005 151.98.226.4.47308 1049792 0 1049800 0 ESTABLISHED
151.98.226.5.44949 151.98.226.4.14005 1049792 0 1049800 0 ESTABLISHED
Tried to trace with ttTraceMon but once I brought down one of the interfaces did not see any reaction on either node, if you have some info it would be really appreciated !
Cheers,
MikeHi Chris,
Thanks for the reply, I have few more queries on this.
1.Using the ROUTE CLAUSE we can use multiple IPs using priority level set, so that if highest priority level set in thr ROUTE clause for the IP is not active it will fall back to the next level priority 2 set IP. But cant we use ROUTE clause to use the multiple route IPs for replication simultaneously?
2. can we execute multiple schema for the same DSN and replication scheme but with different replication route IPs?
for example:
At present on my system, I have a replication scheme running for a specific DSN with stand alone Master-Subscriber mechanism, with a specific route IP through VLAN-xxx for replication.
Now I want to create and start another replication scheme for the same DSN and replication mechanism with a different VLAN-yyy route IP to be used for replication in parallel to the existing replication scheme. without making any changes to the pre-existing replication scheme.
for the above scenarios, will there be any specific changes respective to the different replication schema mechanism ie., Active Standby and Standalone Master Subscriber mechanism etc.,
If so what are the steps. like how we need to change the existing schema?
Thanks In advance.
Naveen -
Lightroom CC issues with multiple export at the same time
Back before Lightroom updated to the CC version, I was able to use export presets to send 4 different versions of the photos I'm working on at the same time (A Full Size for client at certain size, full size for myself, web-sized with watermark and a thumbnail). Since updating to the CC version, I'm only able to start the export process on two of these versions before the system simply becomes crippled and I cannot even navigate through Lightroom without it chugging along.
For reference, I'm running a 2014 rMBP with 16GB of RAM, LR is the only app open at the time and it's showing that I have roughly 6GB of RAM free when attempting this export.
TL;DR: LR5 worked wiht multiple exports at the same time, but LRCC now chugs after 2 exports are startedRe: "Selecting video in Messages, now starts Face time for video. Face time is one to one only."
Apple "Messages" supports two different types of video conferencing. It's become more than a little confusing. If you (or the person on the other end) ONLY have accounts set up for Apple's "iMessage" service (associated with your Apple ID and "iCloud") you may see the video symbol, but when you click on it you will be connected via FaceTime which is limited a 1-to-1 video conference.
However, if you have set up an AIM account in Messages (you may already have an AIM account ID if you once used iChat for video, audio and screensharing) and the person at the other end also has an AIM account you will be connected via AIM and will be able to do screen sharing and multi-person video conferences just like the old iChat, i.e. you'll have iChat Theater features, up to 4-way conferencing, etc.
It can get very confusing if, for example, you've signed up for AIM using a .me or .cloud email address. But once you have it set up and learn to recognise the way Messages switches between AIM and iMessage all the old iChat features work just fine in Messages. -
Active active with multiple csm in the same 6500
How can I achieve active/active configuration with csm in a 6500? Can I do it with 2 csm in the same chassis or I need two chassis, each with one csm?
you can't have active-active setup with CSM.
The CSM uses only 1 FT group and all vservers are linked to it.
So once CSM is active and the other one standby.
If the FT group fails on the active, the standby takes over and it takes a full control - not partial as needed for active-active.
It does not matter if you have 1 chassis or more.
The new ACE module offers the possibility to do active-active.
Gilles. -
How can I create a hashmap() with multiple values for the same key?
I am trying to write an application that will us something like a Map() with multiple values but some have the same key. Is this possible?
i had the same question. just create a List, add all the values u want to it, and then put the List into the map like u would a normal single value. e.g.
List list = new ArrayList();
list.add(value1);
list.add(value2);
map.put(key, list);
i bet u r doing the same course as i am =) -
Sharing Lightroom 4 catalog with multiple users on the same Windows Machine
Hi:
I just started out using Lightroom 4 for managing family photos. What I want to do is to share the LR catalog so that my kids and wife can access the database from their own accounts. I tried sharing the directory with the catalog and all the photos. But when I open lightroom from my kids's account, I keep getting an "unexpected error openning the catalog".
I am using Windows 8, 64bit
The catalog was created in my account (adminstrator)
the other accounts are normal accounts
I have searched around but all the questions ask about sharing on network drives. But I just want to share the catalog on the same machine on local harddrive. I made sure that all the other lightrooms are closed in the other accounts (everyone else is signed off) before I tried to open it from my kid's account.
Any ideas?
thanks a lot for your help,
HermanIt sounds like the other user accounts don't have permission to access the catalog. You could mess with permissions and try to get everyone access to the catalog, or an easier way might be to just move the catalog and the images to their own volume formatted as FAT 32. FAT 32 volumes don't user permissions, thus everyone would have read/write access by default.
-
Contacts with multiple numbers under the same labe...
i
I have many contacts which have numbers saved under the same label.
For example a contact like this:
First name: A
Mobile: 11
Mobile: 22
Telephone: 33
Telephone: 44
When I open Ovi Suite / Contacts / Contacts in E51 and open the abovementioned contact "A" it shows:
A
Mobile: 11
Telephone: 44
Mobile (other): 22
As you see it deleted one of "Telephone" labeled numbers. It also happened when I used PC suite.
It is really annoying as if I save/sync the contact using Ovi, it causes loss of contacts data.
BTW there is no problem using Backup/Restore function of Ovi/PC suite, nor "Copy to memory card" function of the phone itself.
Ovi suit version : 2.1.1.1
Nokia E51 v300.34.56
Windows 7
PS:
tested another one with 6 different numbers under the same "Mobile" label
the result in Ovi is:
AA
Mobile: 11
Mobile (main): 33
Mobile (other): 22
the other 3 numbers were lostatammin wrote:
Ah, you have an interesting setup here.
Could you answer a few clarifying questions regarding this.
> When I open Ovi Suite / Contacts / Contacts in E51 and open the abovementioned contact "A" it shows
* Did you perform a sync? Or did you just connect the phone and look at the contact card in the phone view?
I had performed sync before and realized that some contact data are missing in my phone, so I started investigating to see exactly which contacts are affected by creating some dummy contacts and editing them by clicking on my phones icon below the window of "Contacts" tab in ovi.
* Did you check the contact in your phone (using the phone's UI)? Were all the details there - or are you saying that Ovi Suite lost some of the details?
In fact both. Ovi fails to extract and show some numbers and thus fails to write them back to the phone correctly. The lost details are purged from the phone too.
Just to confirm I've understood the scenario correctly
1) you have contact card in phone with two mobile numbers (same label) and two telephone numbers (same label)
yep
2) you sync with Ovi suite
Either Sync or directly open and save contact.
3) the mobile numbers have been re-labled to Mobile and Mobile (other) but the numbers are preserved
They are re-labled only when viewed in Ovi, but written back to the phone with the same "Mobile" lable as created on the phone.
4) one of the Telephone numbers is completely lost from Ovi Suite and phone.
And this scenario happened with this setup:
- Ovi suite version : 2.1.1.1
- Nokia E51 v300.34.56
- Windows 7
I just want to be clear on the setup and scenario so we can investigate.
thanks, Aki
I also done another test
This is the contact created in phone:
BEGIN:VCARD
VERSION:2.1
N:;A
TEL;CELL:11
TEL;CELL:22
TEL;CELL:33
TEL;CELL:44
TEL;CELL:55
TEL;CELL:66
TEL;VOICE:11
TEL;VOICE:22
TEL;VOICE:33
TEL;VOICE;HOME:11
TEL;VOICE;HOME:22
TEL;VOICE;HOME:33
TEL;VOICE;WORK:11
TEL;VOICE;WORK:22
TEL;VOICE;WORK:33
X-CLASSrivate
END:VCARD
And this is what happens to contact when I just click edit and then save in Ovi.
BEGIN:VCARD
VERSION:2.1
N:;A
TEL;CELL;PREF:11
TEL;CELL:33
TEL;VOICE:33
TEL;VOICE;HOME:33
TEL;VOICE;WORK:33
END:VCARD
I also attached what ovi shows about this contact as an image.
Attachments:
displayed in ovi.PNG 9 KB -
Firefox keeps reloading tabs from my recent history over and over. So i might end up with multiple tabs of Pandora, Google home page or other sites I go to all the time-all running at the same time . rebooting does not help.
It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the files sessionstore.js [2] and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js -
Sharing common mail account with multiple users on the same Mac
My parents recently switch to an iMac from a PC where they were using AOL. They had the PC set up with two users accounts and they did all their mail/internet using AOL.
With the new iMac, I wanted to set it up in the same way as the PC so I set them up with two user accounts and showed them how they can use Fast User Switching to switch back and forth. This works well for them because my father has mostly business stuff on the computer and my mom has mostly projects and they like to keep them separate.
Where they are getting into problems is that I have them both set up with Mail under their respective accounts to access their common AOL account. What seems to be happening is that in some cases one user will get a new mail whereas the other user might never see it. I had them configured using IMAP which I thought would be okay since the mail is stored on the server but now I am not so sure.
I'm thinking that it might help to set Keep copies of messages for offline viewing in the advanced tab to Don't keep copies of any messages, but I wasn't sure. Is a setup like this possible? Or is it just a recipe for trouble?What you’re observing is probably an AOL issue, not a Mail issue. AOL automatically purges mail from the server after some time (just a few days if the messages have already been read). There is nothing you can do about it other than moving/copying those messages somewhere else to avoid losing them.
You may also want to read the following article. It’s somewhat outdated, but still useful to understand how AOL’s IMAP access works:
Accessing the AOL Mail System using IMAP - An Unofficial Guide -
Dbconsole with multiple instances on the same server?
Hi!
I have a LINUX server running 2 separate instances - csp1 and csp2. I have a repository in csp1 and the dbconsole running for csp1. Now I need to find out if / how I can get the dbconsole running for the csp2 instance. This is Oracle standard edition 10.2.0.4. Both instances share the same Oracle Home and Listener. A second Oracle Home has the companion CD (http server) installed in it and has no instances associated with it.
Does anyone have information on how to do this? Here are some of my questions:
1) Do I need separate repositories for each instance or can the repository in csp1 be used for both instances?
2) Can the ports be shared or do I need to assign new port #'s for the 2nd instance? How / where do I do this?
Any hints, tips, suggestions, etc. are greatly appreciated!
Dave Venus1) Do I need separate repositories for each instance or can the repository in csp1 be used for both instances?
Yes, in the free version of EM in 10g ie DB console,that's the restriction. You can't use it for more than one database. It has to be done explicitly for that another database whom you want to manage via it. So as per the answer, yes you do need a seperate repository for your second db. The other db will be in the same Oracle home and surely its em repository can work with the existing listener.But it does require its own set of config files which will be in a sperate folder under Oracle Home with its sid.
2) 2) Can the ports be shared or do I need to assign new port #'s for the 2nd instance? How / where do I do this?
As I mentioned in my last reply, you wouldn't be able to share the port that is already in use. You do need to have a seperate port configured. Normally when you would install the repository oracle would pick up itself a port number. The valid port range , if I remember correctly is from 5500 onwards ( I don't remember the last limit). Even afterwars, you can change the port using "emca" command.
Edit:
I forgot to mention that some time back, here on the forums, I had a discussion with a guy who mentioned that there is a workaround possible to add a target in the current Targets.xml for the second database. I did try it out but still that didn't give me two instances. The most recent one which I added only was accessible.
Update:
I did find that thread,here it is. See if this helps you,
Re: control two database with one database control
HTH
Aman....
Edited by: Aman.... on Oct 28, 2008 7:14 PM
Added Edit
Edited by: Aman.... on Oct 28, 2008 7:28 PM
Added thread -
Report Template Help - Vertical report with multiple rows on the same line.
I am tearing my hair out trying to figure a way to do this. I want a vertical report, but with the rows across the page rather than down it.
e.g.
ROW1 ROW2 ROW3 ROW4 ROW5
ROW1 ROW2 ROW3 ROW4 ROW5
ROW1 ROW2 ROW3 ROW4 ROW5
ROW1 ROW2 ROW3 ROW4 ROW5
ROW1 ROW2 ROW3 ROW4 ROW5
ROW1 ROW2 ROW3 ROW4 ROW5
ROW1 ROW2 ROW3 ROW4 ROW5
ROW1 ROW2 ROW3 ROW4 ROW5Has anyone managed to do this?Use a custom named column report template. The template could generate either:
<li> a table with one physical <tt>tr</tt> row, with your "columns" being the logical "rows" of the report rendered as the <tt>td</tt>s within the row
<li> a list of lists using CSS to render them side-by-side via <tt>float</tt> or <tt>inline-block</tt> (Some examples of similar techniques) -
Problems with multiple connections in the same transaction
Hi all !
I'm have two questions regarding the way weblogic handles multiple
connections.
1) first, I don't understand why weblogic always create a new Managed
Connection when I'm asking for 2 connection handles on the same connection
factory and with the same connectionRequestInfo. Isn't it supposed to share
connections ?
For instance, the following snippet of code results in the creation of 2
managed connections:
ConnHandle conn1 = myCF.getConnection(myRequInfo);
ConnHandle conn2 = myCF.getConnection(myRequInfo);
The class corresponding to myRequInfo does implement the equals and hash
method, so that weblogic's connection manager could use them to check that
the queried connections are the same, and thus could share a single
ManagedConnection between multiple connection handles. Apparantly it does
not do that...
2) OK, I just let weblogic create the 2 managed connections, but... My use
of the connections is as part of a transaction. Here is what happens:
ConnHandle conn1 = myCF.getConnection(myRequInfo);
// a new managedConn1 is instanciated. the following happens (just a
description)
// xar1 = managedConn1.getXAResource()
// xar1.start(NOFLAGS)
// I use the conn1 handle
conn1.close();
//xar1.end(SUSPEND)
ConnHandle conn2 = myCF.getConnection(myRequiInfo);
// a new managed connection managedConn2 is instanciated.
// xar2 = managedConn2.getXAResource();
// xar2.start(RESUME)
// I use conn2 handle
conn2.close();
// xar2.end(SUSPEND);
// my bean returns from the remote invocation
// the client of the bean asks to commit (using UerTransaction.commit on the
client side)
// xar2.end(SUCCESS)
// xar2.commit(onePhase=true);
// managedConn2.cleanup();
And that's all. So, as one can see, managedConn1.cleanup was never called.
When looking in the weblogic console, I can see that I have one connection
with 0 handle and one with 1 handle, deemed as still being in a transaction.
So, the conenction manager apparantly loses a managed connection during the
transaction. And it's very very bad because after a couple of transactions,
I'm running out of managed connections (I had set a limit of 10).
Any one has seen such a weird behavior ? Is this a problem on my side, or
weblogic's ? Thanks for your help.
Sylvain
I ran another test. This time I have a bean that makes use of a connector
once per method invocation. The bean method invoked is "sayHello" and it
gets a connection to the EIS, perform an operation on it and release it. The
connector I developed uses XA transactions.
My test client just calls 3 times myBean.sayHello().
I can distinguish two cases:
1) first, the client doesn't do transaction demarcation. In this case, since
the sayHello method is marked as requiring transaction, the folowing happens
in the bean:
// **** first invocation of the bean
connHandle = myCF.getConnection();
// managedConn1 is instanciated
// xar1 = managedConn1.getXAResource()
// xar1.start(NOFLAGS);
// managedConn1.getConnection gives a connection handle
connHandle.doSomeWork();
connHandle.close()
// xar1.end(SUCCESS);
// the bean returns from its invocation
// xar1.commit(onePhase=true)
// managedConn1.cleanup()
// **** second invocation of the bean
connHandle = myCF.getConnection();
// managedConnectionFactory.matchManagedConnection is called. It returns the
managed connection (managedConn1) that is in the passed set
// xar1 = managedConn1.getXAResource()
// xar1.start(NOFLAGS);
// managedConn1.getConnection gives a connection handle
connHandle.doSomeWork();
connHandle.close
// xar1.end(SUCCESS);
// the bean returns from its invocation
// xar1.commit(onePhase=true)
// managedConn1.cleanup()
// **** third invocation of the bean
connHandle = myCF.getConnection();
// managedConnectionFactory.matchManagedConnection is called. It returns the
managed connection (managedConn1) that is in the passed set
// xar1 = managedConn1.getXAResource()
// xar1.start(NOFLAGS);
// managedConn1.getConnection gives a connection handle
connHandle.doSomeWork();
connHandle.close
// xar1.end(SUCCESS);
// the bean returns from its invocation
// xar1.commit(onePhase=true)
// managedConn1.cleanup()
2) second case : the client performs transaction demarcation. In that case,
the connection manager instanciates 3 managed connections, calls start/end
on each XAResource corresponding to each managed connection, calls commit
once, but also calls cleanup only once, leaving 2 lost managed connections
The client looks like this:
UserTransaction utx = context.lookup("javax/transaction/UserTransaction");
utx.begin();
MyBean myBean = ctx.lookup(".......");
myBean.sayHello();
myBean.sayHello();
myBean.sayHello();
utx.commit();
on the server the following happens:
// **** first invocation of the bean
connHandle = myCF.getConnection();
// managedConn1 is instanciated
// xar1 = managedConn1.getXAResource()
// xar1.start(NOFLAGS);
// managedConn1.getConnection gives a connection handle
connHandle.doSomeWork();
connHandle.close()
// xar1.end(SUSPEND);
// the bean returns from its invocation
// **** second invocation of the bean
connHandle = myCF.getConnection();
// managedConn2 is instanciated
// xar2 = managedConn2.getXAResource()
// xar1.isSameRM(xar2) is called. returns true
// xar2.start(RESUME);
// managedConn2.getConnection gives a connection handle
connHandle.doSomeWork();
connHandle.close()
// xar2.end(SUSPEND);
// the bean returns from its invocation
// **** third invocation of the bean
connHandle = myCF.getConnection();
// managedConn3 is instanciated
// xar3 = managedConn3.getXAResource()
// xar2.isSameRM(xar3) is called. returns true
// xar3.start(RESUME);
// managedConn3.getConnection gives a connection handle
connHandle.doSomeWork();
connHandle.close()
// xar3.end(SUSPEND);
// the bean returns from its invocation
// the client invokes commit on the UserTransaction
// xar3.end(SUCCESS);
// xar3.commit(onephase = true);
// managedConn3.cleanup();
And so, managedConn1 and managedConn2 got lost in the way...
What's more puzzling, it's that when monitoring my connector with the
console, I can see that there are 3 connections. 2 declared as still having
one handle used and being in transaction, and one not in transaction and
with 0 active handle. BUT when monitoring the JTA part of the server, I can
see that there has been 1 transaction that committed, and no connection is
"in flight" as the console says. So, on one side the console says 2 managed
connections are still part of a transaction while on the other it says that
no transactions are currently in flight.
Thanks for any kind of help on this very bizarre behavior.
Sylvain
Maybe you are looking for
-
orignal screen when i tried to turn it on. after hours of trying it finally connected to itunes and just as it started to sync it disconnected and the screen went like this. help me please. its a 2nd gen ipod and out of warrenty.
-
Downloaded files with ActiveX not displays using Windows 8 and IE 11
We are using ActiveX for downloading file from our server. After downloading ActiveX decrypt downloaded files. ActiveX works fine with all other IE versions but in case of IE 11, when we download the files ActiveX doesn't throw any error, but when we
-
Can't connect to Windows 8 or 7 with Lumia 920
I've tried to connect to both w7 and w8, in the case of w7 the drivers install and the icon for the windows phone is visible under My Computer, but any attempt to interact with it produces an error. On w8 the new Windows Phone app downloads when the
-
I need some advice on what to do with my present system. I will be using CS4 Prod Prem for editing HD, AVCHD, SD, etc. ...here's the issue - I bought a custom built comp with - Antec 902 Mid Tower ATX case 750Watt Corsair power supply w/140mm fan 2-1
-
KB survey for Spanish and German Community!
Hi All, All this while we have KB survey prompt as well as a static link when users view a KB article. However, the survey language was in English format only. Now, English, Spanish and German KB articles should have their respective language of KB s