I want to create generic master data attribute datasource on ANLA table .

hI,
I want to create generic master data attribute datasource on ANLA table .
and have to activate delta load.
Is it possible for delta upload on this table?
if it is possible then on which field i can create genric delta?

1.I want to fetch quantity ,inventory no , serial no.......
I have to enhance that datasource.....
2.else i can create master data for asset number using ANLA
I have opted 2nd option

Similar Messages

How to create generic master data datasource .

How to create generic master data datasource which utilises ALE change pointers for extraction of master data.

Hi,
For any master data lets say, Material Master, for this you need to create a view
based on your requirement by selecting one or more tables into your view and
keeping all the required fields in the view as viewfields and go to RS02 create
generic data source, select the view option as source and put the view, save and
activate, at the same time set the delta pointer as to whether Numericpointer/date/timestamp..this way you can create a generic DS then transfer the stru. and at the BW side replicate the source system..and so on..
Hope this helps..
Assign points if useful.
Need further info revert..
Cheers,
Pattan.

Some of the Master Data Attributes DataSources not visible in RSA5

Hi Experts,
After installation of R/3 ECC 5, some of the master data attributes datasources are not visible in RSA5.
Do i need to do any other settings to get them.
Awaiting response....
Thanks in advance.....
Rafi

Hi Prakash,
Thanks for quick response. I have checked those tables. i found that i have same datasources as it is in RSA5.
For example: i have 0SALE_DIST_TEXT in both RSA5 and ROOSOURCE, how i can have the attributes for the same.
also i don't have attributes datasource for Customer Group1...5, Material Group1...5, sales office etc.,
Anticipating your response,
Thanks
Rafi

Enhancing Master Data Attribute Datasource with a Key Figure

Hi All,
I need to add key figure 0PRICE as a display attribute of characteristic 0XYZ.
I enhanced the datasource 0XYZ_ATTR, by adding an append structure to BIW_XYZ. Do I need to add a currency field to the append structure? Where do I reference this currency field? Your input is greatly appreciated. Thank you.
Juice

Yes, you need to include a currency field, at least when you get to the BW side (mapping) ... In this case, if you use 0PRICE, you need to include 0CURRENCY...
You can either assign it in the ABAP routine for the InfoObject Attributes in CMOD or once you do the mapping in BW... Either as a fixed value or transferred from R/3, if you added it to the enhance structure and assigned a value to it in your CMOD include...
0MATERIAL is a good reference to look at for this kind of scenario...

How to create a master data

hi friends
i want to create a master data in the user table i have created the data tables only using the documents and document rows.. i havent created using master data ... is ther any difference between the socuments and master data?

Hi Manoj
While creating the Usertable, set the Object type field to Masterdata, by default we wud have Document as Object type now create the User fields and the data you enter into this is called as Masterdata, A master data with a unique key cannot be repeated thus redundant data can be avoided. thats the difference between Document table and Master Data table.
Regards
Cool Ice

Using "Master Data Attribute of" in the Update Rule

Hi,
In my update rule of, i want to replace the master data attribute of my characteristic instead of using its source characteristic. For example. InfoObject ZSTORECODE has an attribute ZSTORENAME. My objective is to use the Store Name instead of a Store Code.
I initially thought of using "Master Data Attribute of" in the update rules. However, I always end of with having an error of "No Values."

Hope you guys can help me with this!
Thanks,
Raomon

DATA: V_NSTC_SN2,
V_KFC_COSTC LIKE RSGENERAL-CHAVL.
V_KFC_COSTC = DATA_PACKAGE-KFC_COSTC.
CALL FUNCTION 'RSAU_READ_MASTER_DATA'
 EXPORTING
 I_IOBJNM = 'KFC_COSTC'
 I_CHAVL = V_KFC_COSTC
* I_T_CHAVL =
* I_DATE =
* I_FLG_WHOLE_TABLE =
 I_ATTRNM = 'NSTC_SN2'
IMPORTING
* E_STRUCTURE =
* E_TABLE =
 E_ATTRVAL = V_NSTC_SN2
 EXCEPTIONS
 READ_ERROR = 1
 NO_SUCH_ATTRIBUTE = 2
 WRONG_IMPORT_PARAMETERS = 3
 CHAVL_NOT_FOUND = 4
 OTHERS = 5
RESULT = V_NSTC_SN2.
Another Example Code:
index on infoObject

Using master data attribute in BEx Query u0096 formula

Hello,
I want to use the master data attribute (Eg. Customer master 0CUSTOMER, 0ALTITUDE (Geo Location Height)) in query formula calculation. How do I do this?
Please help me.
Thank you
Subbu

Hi Subramaniam,
You can definately use the master data attributes in the formula calculation if that is a numeric value (logically u can use a characteristic in formula).
for e.g Net weight from 0MATERIAL can be used through formula variable in formula but Color is a characteristic and there is no point in using that in a formula.

Error while creating Data Source for master data attributes

Hi BI Experts,
Well its been some time for me that I have been part of Extraction in BI.I primarily handled reporting in my last assignments.
I was trying extraction with flat files in SAP BI 7(new to sap bi 7 but very much familiar with BW3.5) but failed in the activity during master data attributes and text upload in infoobject (say IOSP_Mat).
Here is the procedure that I did after creation of characteristic IOSP_Mat.I created a source system for flat file followed by data source for Master data attributes, i selected all the parameters correctly.i.e. csv file format, data seperator as ,
and other settings, now when i am trying to look at the proposed data in the next tab using Load example data.its not showing the desired result.The columns that I have maintained in Flat File is MAT_NUMBER and MAT_NAME (with say 100 data in the file)
same is the result when I am trying to load the text data too columns maintained are
(LANGUAGE MAT_NUMBER Short Description)(same 100 data).
now i used to rsa1old transaction to upload the file using 3.5 version.i created info source for master data/text/hierarchies for IOSP_Mat
now when trying to upload it using info package for master and text data,I observe its(the data) not maintained in the characteristic IOSP_Mat.
When I monitored ,I figured the data has not been even uploaded to the PSA level.
Can you BI experts tell me the answer for this.
Thanks,
Srijith

apologies to all of you for late response,
was busy with some other activities.
I don't remember the exact message,but I remember it was not loaded to even the PSA level.I will try it again and post the exact message.
Thanks again for your quick response.
Once again sorry to all of you for my late response
Thanks,
Sri

How to extract master data attribute from r/3 to bw give steps details

how to extract master data attribute from r/3 to bw give steps details screenshots

Hi
Go through the below process to extract Master Data Attribute from R/3
Hi,
Maintaining Generic DataSources
Use
Regardless of the application, you can create and maintain generic DataSources for transaction data, master data attributes or texts from any transparent table, database view or SAP Query InfoSet, or using a function module. This allows you to extract data generically.
Procedure
Creating Generic DataSources
1. Select the DataSource type and specify a technical name.
2. Choose Create.
The screen for creating a generic DataSource appears.
3. Choose the application component to which you want to assign the DataSource.
4. Enter the descriptive texts. You can choose any text.
5. Select the datasets from which you want to fill the generic DataSource.
a. Choose Extraction from View if you want to extract data from a transparent table or a database view. Enter the name of the table or the database view.
After you generate the DataSource, you have a DataSource with an extraction structure that corresponds to the database view or transparent table.
For more information about creating and maintaining database views and tables, see the ABAP Dictionary Documentation.
b. Choose Extraction from Query if you want to use a SAP Query InfoSet as the data source. Select the required InfoSet from the InfoSet catalog.
Notes on Extraction Using SAP Query
After you generate the DataSource, you have a DataSource with an extraction structure that corresponds to the InfoSet.
For more information about maintaining the InfoSet, see the System Administration documentation.
c. Choose Extraction Using FM if you want to extract data using a function module. Enter the function module and extraction structure.
The data must be transferred by the function module in an interface table E_T_DATA.
Interface Description and Extraction Process
For information about the function library, see the ABAP Workbench: Tools documentation.
d. With texts you also have the option of extracting from fixed values for domains.
6. Maintain the settings for delta transfer, as required.
7. Choose Save.
When performing extraction, note SAP Query: Assigning to a User Group.
Note when extracting from a transparent table or view:
If the extraction structure contains a key figure field that references a unit of measure or a currency unit field, this unit field has to be included in the same extraction structure as the key figure field.
A screen appears on which you can edit the fields of the extraction structure.
8. Edit the DataSource:
○ Selection
When you schedule a data request in the BI scheduler, you can enter the selection criteria for the data transfer. For example, you can determine that data requests are only to apply to data from the previous month.
If you set the Selection indicator for a field within the extraction structure, the data for this field is transferred in correspondence with the selection criteria in the scheduler.
○ Hide field
You set this indicator to exclude an extraction structure field from the data transfer. The field is no longer available in BI when you set the transfer rules or generate the transfer structure.
○ Inversion
Reverse postings are possible for customer-defined key figures. Therefore inversion is only active for certain transaction data DataSources. These include DataSources that have a field that is marked as an inversion field, for example, the update mode field in DataSource 0FI_AP_3. If this field has a value, the data records are interpreted as reverse records in BI.
If you want to carry out a reverse posting for a customer-defined field (key figure), set the Inversion indicator. The value of the key figure is transferred to BI in inverted form (multiplied by 1).
○ Field only known in exit
You can enhance data by extending the extraction structure for a DataSource by adding fields in append structures.
The Field Only Known in Exit indicator is set for the fields of an append structure; by default these fields are not passed to the extractor from the field list and selection table.
Deselect the Field Only Known in Exit indicator to enable the Service API to pass on the append structure field to the extractor together with the fields of the delivered extract structures in the field list and in the selection table.
9. Choose DataSource ® Generate.
The DataSource is saved in the source system.
Maintaining Generic DataSources
● Change DataSource
To change a generic DataSource, in the initial screen of DataSource maintenance, enter the name of the DataSource and choose Change.
You can change the assignment of a DataSource to an application component or change the texts of a DataSource. Double-click on the name of the table, view, InfoSet or extraction structure to get to the appropriate maintenance screen. Here you make the changes to add new fields. You can also completely swap transparent tables and database views, though this is not possible with InfoSets. Return to DataSource maintenance and choose Create. The screen for editing a DataSource appears. To save the DataSource in the SAP source system, choose DataSource ® Generate.
If you want to test extraction in the source system independently of a BI system, choose DataSource ® Test Extraction.
● Delta DataSource
On the Change Generic DataSource screen, you can delete any DataSources that are no longer relevant. If you are extracting data from an InfoSet, delete the corresponding query. If you want to delete a DataSource, make sure it is not connected to a BI system.
NR

Change dataosurce from master data attributes to text

Hi,
i build data source as master data attributes (in tr sbiw) and i want to change it to text ,
how can i do that?
Regards

Hi....
You can copy it and recreate it as text in RSO2.
Just create a new one... There are max 5 entries in a generic extractor so note them down and recreate...
Regards,
Debjani......

Map My Update Rule from a Master Data Attribute

Hello experts,
I haven't tried this scenario yet, hope you can help me, the Issue is this
I have 2 InfoObjects ZPSCHRCHY and 0PROFIT_CTR from InfoCube WBS cost and allocations I want both the InfoObjects to be mapped to 0PROFIT_CTR attribute of 0WBS_ELEMT master data object, I have tried the Master Data Attribute but only 0PROFIT_CTR is an attribute of the Master Data.how can I mapped ZPSCHRCHY and 0PROFIT_CTR to 0PROFIT_CTR?, Is creating a start routine for it must be used? Thank you very much
Regards and Thanks
Chris

PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TYPES:
BEGIN OF r_MD_WBS_ELEMENT,
 WBS_ELEMT like /BI0/PWBS_ELEMT-WBS_ELEMT,
 OBJVERS like /BI0/PWBS_ELEMT-OBJVERS,
 PROFIT_CTR like /BI0/PWBS_ELEMT-PROFIT_CTR,
END of r_MD_WBS_ELEMENT.
DATA: t_MD_WBS_ELEMENT TYPE STANDARD TABLE OF r_MD_WBS_ELEMENT,
 wa_MD_WBS_ELEMENT TYPE r_MD_WBS_ELEMENT.
$$ end of global - insert your declaration only before this line -
The follow definition is new in the BW3.x
TYPES:
BEGIN OF DATA_PACKAGE_STRUCTURE.
 INCLUDE STRUCTURE /BIC/CS8ZPSG030.
TYPES:
 RECNO LIKE sy-tabix,
END OF DATA_PACKAGE_STRUCTURE.
DATA:
DATA_PACKAGE TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
 WITH HEADER LINE
 WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
FORM startup
TABLES MONITOR STRUCTURE RSMONITOR "user defined monitoring
 MONITOR_RECNO STRUCTURE RSMONITORS " monitoring with record n
 DATA_PACKAGE STRUCTURE DATA_PACKAGE
USING RECORD_ALL LIKE SY-TABIX
 SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line -
fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
to make monitor entries
REFRESH: t_MD_WBS_ELEMENT.
 SELECT WBS_ELEMT
 OBJVERS
 PROFIT_CTR
 INTO TABLE t_MD_WBS_ELEMENT
 FROM /BI0/PWBS_ELEMT
 FOR ALL ENTRIES IN DATA_PACKAGE
 WHERE WBS_ELEMT = DATA_PACKAGE-WBS_ELEMT.
 IF sy-subrc EQ 0.
 Do nothing
 ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -
ENDFORM.

Transofmration : Master data attribute

Hello,
I am on NW 2004S BI and ECC 6.0.
In the transformation rule types, i can not find "Master data attribute of" .
If this is the case in this version,in the infocube, how to load the data for a particular IO, which is an attribute of another IO ?
In the older versions, in the update rules, i can select either source, constant, master data attribute of,routine etc ..
Any advice?
Regards,
Ravi

Hi Ravi,
We have "Master Data Attribute" as a Rule type of Transformation in NW2004S BI also.
Where in the previous version BW3.x you have option to create the Master Data Read Rule only between
DataTarget to DataTarget
or
Infosource to DataTarget.
But, The New Enhancement of NW2004S BI is, Even you can read the Master Data Attribute in Transformation have builded between DataTarget (InfoCube or ODS) and DataSource also.
How to assign the InfoObject for Master Data Read?
Select Target Field.
Select the source InfoObject from where you want to read Master Data.
When you have to choose the "Master Data Read" as the Rule Type. Then You will get the entry block next to Rule Type.
Click F4, then it will give the Attribute automatically.
Hope this helps you.
Regards,
Vamsi

Delta for generic master data extractor

Hello,
Is it not possible to load deltas for a generic master data extractor?
I have created a generic extractor on R/3 table MEAN (EAN number assigned to material). I have also performed the init run which worked fine, but no deltas are being loaded.
Why is this?
Best regards,
Fredrik

hi,
its possible
how to generic delta
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
SAFETY DELTA
check these links
oss note 368739
Symptom
For the setup of summarization levels and summarization data in the Profitability Analysis a 'Safety delta' of half an hour is used. This means, the system only includes records which exist half hour already. You want to reduce this delta in order to get more current data in reporting.
Additional key words
Summarization levels, summarization data, safety delta, time stamp
Cause and prerequisites
The reason for the duration of these safety deltas are possible differences in the clocks on different application servers. If the delta is selected too short, when updating the summarization levels/data, records may not be taken into account. In particular the Account-based Profitability Analysis depends on the sufficient length of the delta, so that update processes which take longer do not cause inconsistencies. For the Costing-based Profitability Analysis a lock is set. If not active update processes exist, it fails and the update terminates.
Solution
The attached source code correction is not part of the standard system. With this change the safety delta is set from 30 to 5 minutes. You should only implement this, if exclusively the Costing-based Profitability Analysis is active in your system. If you also use Account-based Profitability Analysis we do not recommend the change for the above-mentioned reasons.
Generic delta safty intervals
oss note 392876
safety interval
0FI_GL_4 Safety Delta
Genric delta fro table
check this thread which already discussed about this topic
Generic Extractor - Delta
Shreya

Master data Attribute of ( Update rule)

Hi SDN,
I Just want to know the procedure to create update method of Master data Attribute of . coild any one tell me step by step
Regards
sujan

3.     Creation of data targets
     In left panel select info provider
     Select created info area and right click to select Insert Characteristics as info provider
     Select required info object ( Ex : Employee ID)
     Under that info object select attributes
     Right click on attributes and select create transformation.
     In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
     Activate created transformation
     Create Data transfer process (DTP) by right clicking the master data attributes
     In extraction tab specify extraction mode ( full)
     In update tab specify error handling ( request green)
     Activate DTP and in execute tab click execute button to load data in data targets.
cheers
John

Updating Master data attributes through BPS

Hi All,
Can we modify master data attributes via BPS? Like we have some Attribute characteristics for 'vendor' say 'class(good/bad/ok)' and we want that to be updated via BPS (not from R/3) then how it can be achived?
Please help by explaining this.

Hi,
Create two variables one for vendor and other for status (variable of type attribute), give both the variables in the folder. User will select the vendor and the attribute status value in selections. Create an exit planning function to update the attribute.
Import parameters
i_area type upc_y_area
i_variable type upc_y_variable
i_chanm type upc_y_chanm
Export parameters
eto_charsel type upc_yto_charsel
tables
i_t_attributes structure rsd_s_iobjnm optional
i_t_data structure rsndi_s_chavl optional
In the code, Read the above two variable values selected by user. Then delete the existing entry of MD by calling the function RSNDI_MD_DELETE.
Now update the master data with the new attribute value selected by the user in the variable by calling the function
RSNDI_MD_ATTRIBUTES_UPDATE. After this activate the master data by calling RSDMD_MD_ACTIVATE.
Hope this solves the issue.
Bindu

I want to create generic master data attribute datasource on ANLA table .

Similar Messages

Maybe you are looking for