I want to create new popup block screen in CO11N SCREEN for condition check
in standard CO11N screen after completing filling the required field , when i click the save icon I NEED TO CREATE THE POBUP BLOCK SCREEN FOR CONDITION CHECKING WHICH CONSIST
YES NO CANCEL
IS THERE ANY FUNC MODULES TO DO THIS? OR IS IT POSSIBLE BY CODING?
Don't rely on 'Preview'.
Share/Export as .ibooks file and then drag that to iTunes and sync to your iPad.
Still no joy, find a pre-processing recipe ( that includes export for iPad) that doesn't spoil the quality in the process.
Just keep in mind that low quality in means low or lower quality out, in this example.
Similar Messages
-
Don't want user create new item via VA02
Hi experts:
If I don't want user create new item in sales order via VA02,
how can I do it ??
Thanks
ShwanThis can be done by Roles and authorisation.
Basis can be able to do the settings in such a way that once the user save the sales order at VA01, he can' t change anything in that.
THat can only be modified by the authorised person.
Reward if useful.
Regards,
Kaleeswaran B -
I had used Iphone4 to update to ios 7.0.4(11B554a) but after update whenever I want to create new contact, I can't type in the word because the keypad don't appear, what should I do? Can I uninstall the update of ios 7.0.4?
You cannot uninstall the update. Apple does not support downgrading. What troubleshooting have you done? Start with a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. Are you syncing contacts with iCloud?
-
Want to create new protection group for 2 members which are already under another protection group. I have 12 servers under xyz protection group, want to move 2 members server to new protection group. How it is possible without loosing current backups.
Hi,
It all depends if the data source was originally co-located on the same replica shared with other data sources. If not then DPM will simple re-use the same replica and pick up where it left off. If it was co-located, then the old replica and RP
volume is shared and the RP's will expire as new ones are made on the new replica and RP volume created when it's re-protected.
Moving Between Co-Located and Non-Co-Located Protection Groupshttp://technet.microsoft.com/en-us/library/ff399045.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
Not able to create new e-mail on N8 using Mail for...
Not able to create new e-mail on N8 using Mail for Exchange.
Currently using google for my domain, but settings are the same as explained on the google Sync webpage: http://www.google.com/support/mobile/bin/answer.py?hl=en&answer=147951
When creating reply on mail the application crashes. When creating new mail it says "Kan bewerking niet uitvoeren" in english: "Unable to execute action".
Any idea why creating mail is not possible?
Regards,
Jorisproblem is known
more info there:
/t5/Nseries-and-S60-Smartphones/N8-syncing-with-Google-contacts-amp-calendar/td-p/772020
there is little workaround aslo. -
Hi gurus ,
I am trying to define new User exit screen for LM51. I have developed new screen assigned as,
logical == 9151 variant=9 actual screen = 2151
assighned in lrfmd with variant = 9
Even In Lm51 its not calling the subscreen 9151.i am not getting reson,
kindly help me
Edited by: Matt on Dec 17, 2008 10:05 AM - Please read the Rules of Engagement. "urjt" not allowed.Hi,
Did you try with these exits???
MWMMOB01 Enhancement for Verification Field in the Warehouse Master
MWMMOB02 Extension for Barcode Translation
MWMRFSRT ENHANCEMENT FOR TO SORTING
Thanks -
Im getting message while i create new icloud id " no more free account for this iphone "
im getting message while i create new icloud id " no more free account for this iphone "
please help me if anyone knew the solution,
thankshttps://discussions.apple.com/message/24635931#24635931
-
Time Machine wont mount backup, wants to create new one.
I'm running OSX Lion 10.7 on an iMac 27 with an intel i5 2.7 GHz processor.
I received a notification that Time Machine wasn't backing up.
Somehow the external backup drive became disassociated with TM. So I re-selected it and TM began preparing for a backup. A few moments late a warning popped up stating there was not enough space on the disk to complete the backup.
I entered Time Machine to free up space however, TM had created a new backup file and now it won't mount the original one. I've tried deleting the new backup file, hoping TM would mount the original, but it just keeps creating new ones.
I noticed the new backup file name was different to the original. After looking in to it further, it appears as if this was due to some changes I'd made in my file sharing settings, a couple weeks back, while trying to download some photos from am Android phone. I changed the name back, however, TM still want's to create a new file and still won't mount the original.
The last time it successfully backed up was Oct 30th and the good news is, I can manually open the original backup file in Finder, and see all the old files.
I've read through a number of trouble shooting sites and I've already checked for and installed all updates with no luck.
I really could use some help with this. Any and all input would be greatly appreciated.
Thanks.No, I don't think playing around with the sparsebundle is very good idea ever.
If you are now down to that level. Move the old sparsebundle off the TC. Either delete the whole thing and start over.. or save it beforehand.
It is possible to archive off the old sparsebundle, although it is pointless if it is corrupted.
You can copy it to a USB drive on the computer.
See Q18 here. http://pondini.org/TM/FAQ.html
That will take a long long time so be warned.. and do it with ethernet.. otherwise it will take forever.
You can also do the archive directly to USB disk plugged into the TC. You need a hard disk at least as large as the data.
And you will need to use v5.6 airport utility because Apple deleted it in the new version.
If you run Mountain Lion (Lion is easy) you can download it and install by a trick.
That will then give you access to archive and you can use that to save the present hard disk info.. then erase it and start over.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0 -
I want to create new tags.
I often access science sites. Today I tried to bookmark such a site and wanted to tag it with a tag called "Science" and was unable to find that tag so now I want to create a tag called Science. How do I do that? Firefox is supposed to be personalizable and it's why I run it. Is a folder the same as a tag? I saw info on how to create new folders but not tags. Please help.
See [[Bookmark Tags]]
-
I want to create new id for my i phone 4s
i have used 2 account earlier but now i want create new id as i already purchased i moved my existing id to new
Your post is unclear...
nithyaasb wrote:
i have used 2 account earlier but now i want create new id as i already purchased i moved my existing id to new
Apple ID FAQs > http://support.apple.com/kb/HT5622 -
"Create New System Entry" screen
Hello,
I would like to make pre-configured connection settings available to users in my company. When the New button is clicked in SAP Logon the first screen that comes up is "Create New System Entry" with a text of:
"Select one of the available systems from the list below. If you choose the first entry, you can specify the system parameters yourself."
However the only entry in the list is "User Specified System"
How can I populate that list with pre-configured settings for users to choose?
- Regards,
Richard BaileyHi Richard,
Yes the integration between Active Directory and SAP systems management exists. However, the automatic registration of systems in the active directory could have been done during the installation of SAP system itself.
Below could be of help:
SAP Notes 386762 and 608781
http://download.microsoft.com/download/f/3/7/f371bbba-2341-41bf-822d-2c7dd4174756/SS_AD_SAP.doc
http://www.cybersafe.com/d2/prod-and-soln/howto/sapguissoin10min
Regards,
Srikishan -
Want to create new Status types in the CBIH82 T.code EHS module
Dear Expert,
Client wants that status type like YES and NO in the filed Status in the t.code "CBIH82 -Edit Work area"
I have try to create in the spro path under the status management but unable see that status.
Path is SPRO --->Environment ,Health and Safety ---->INS ---->Basic settings--->Status Management
So any body guide me how to create the new Status for this T.code or We can't create new status in the system.
Thanks
UrvashiPlease uncomment this:
ORDER_ITEM_INX-target_qty = 'X'.
You can check the 2nd example in this link for your reference.
http://sap4.com/wiki/index.php?title=BAPI_SALESORDER_CHANGE
Regards,
Naimesh Patel -
Create New Info Block in ECC for CRM Customer Fact Sheet
Hi,
we have a requirement to add a new info block in Customer Fact Sheet to display Equipment master from ECC. the info block required somehow is not listed in standard ECC info block.
is there any way i can configure the info block in ECC so i can call it from CRM? or do i need to develop it using ABAP in ECC?
thanks in advanceWhat I really really need is an example of how a new Assignment block can be created so that it appears in the PDF fact sheet.
I'm aware that the interface within the Smartform will need to be changed, along with the coding to process any new data being parsed in. The copied class, now called ZCL_UIU_PRN_ACCOUNT has a method called Collect_data which populates the itabs and forwards to the appropriate Smartform. I'm currently looking through this code to see what needs to be done.
The collect_data method loops through the data in the CRMT_BSP_PRINT table and retrieves the data structure and class, and I assume it calls them, but I have no idea what these classes have in common as I can't see common theme with them.
The data sources are:
CRMT_BSP_ACTIVITY2_BP
COMT_BSP_BP_ADDRESS
CRMT_BSP_CONTACT_OBJ_BP
CRMT_BSP_INT_HISTORY_BP
CRMT_BSP_OPPORTUNITY_BP
CRMT_BSP_ACC_R3_FACT_SHEET
CRMT_BSP_ACC_RELATION
CRMT_BSP_SALES_AREA_BP
and their associated class/interface is:
CL_BSP_ACC_ACCMOD_ACTIVITY
CL_BSP_BP_ACCMOD_ADDR_MIX
CL_BSP_ACC_ACCMOD_CONTACT
CL_BSP_ACC_ACCMOD_INT_HISTORY
CL_BSP_ACC_ACCMOD_OPPORTUNITY
CL_BSP_ACC_ACCMOD_PRN_R3DATA
CL_BSP_ACC_ACCMOD_RELATIONS
CL_BSP_ACC_ACCMOD_SALES_AREA
It would look like a lot of these classes are based on CL_BSP_*ACCMOD classes, but that's guesswork on my part.
I am unhappy that I seem to be pioneering here as there's no guide/help on exactly what needs to be done to add new AB's/sections to the PDF fact sheet. I find that strange as most areas are well documented, except this area as far as I know.
Sure, there is a note which identifies some of the objects that need to be changed, but misses out a vital table, but there are no guides. There are many people who produce videos on how to achieve the easier stuff, like adding fields to AB's via the UI configurator, but there seems to nothing in the area of extending the PDF fact sheet.
Jas
Edited by: Jason Stratham on Apr 29, 2010 10:22 AM -
Create new tab in header using badi ME_GUI_PO_CUST for tcode ME21N
Dear all,
i have implemented method SUBSCRIBE in ME_GUI_PO_CUST to create new tab in ME21N,
but the tab is not coming
following is the code snips, please tell where is the error, or some setting needs to be done
method IF_EX_ME_GUI_PO_CUST~SUBSCRIBE.
DATA: ls_subscriber LIKE LINE OF re_subscribers.
if sy-tcode eq ' ME21N' OR SY-TCODE EQ 'ME22N' OR SY-TCODE EQ 'ME23N'.
CHECK im_application = 'PO'.
CHECK im_element = 'HEADER'.
CLEAR re_subscribers[].
ls_subscriber-name = 'Customer-Data'.
ls_subscriber-dynpro = '0101'.
ls_subscriber-program = 'SAPLMEGUI'.
ls_subscriber-struct_name = 'MEPO_SUBSCRIBERS'.
ls_subscriber-label = 'Customer Data'.
ls_subscriber-position = 10.
ls_subscriber-height = 7.
APPEND ls_subscriber TO re_subscribers.
ENDIF.
endmethod.
Regards
SumodhHi...I hv similar requirement.
I need to show a custom field in the screen for the items.
I tried using the methods "SUBSCRIBE" and "MAP_DYNPRO_FIELDS" as explained in the sample code.
Below is my code. I have copied the sample code and changed it lil.
Method "SUBSCRIBE":
DATA: ls_subscriber LIKE LINE OF re_subscribers.
we want to add a customer subscreen on the item detail tab
CHECK im_application = 'PO'.
CHECK im_element = 'ITEM'.
each line in re_subscribers generates a subscreen. We add one subscreen in this example
CLEAR re_subscribers[].
the name is a unique identifier for the subscreen and defined in this class definition
ls_subscriber-name = subscreen1.
the dynpro number to use
ls_subscriber-dynpro = '9000'.
the program where the dynpro can be found
ls_subscriber-program = 'SAPLZMMPO1'.
each subscreen needs his own DDIC-Structure
ls_subscriber-struct_name = 'ZMM_PO_CUST_SCREEN'.
a label can be defined
ls_subscriber-label = text-t01.
the position within the tabstrib can be defined
ls_subscriber-position = 13.
the height of the screen can be defined here. Currently we suport two screen sizes:
value <= 7 a sevel line subscreen
value > 7 a 16 line subscreen
ls_subscriber-height = 7.
APPEND ls_subscriber TO re_subscribers.
method "MAP_DYNPRO_FIELDS":
FIELD-SYMBOLS: <mapping> LIKE LINE OF ch_mapping.
*- customer fields
CONSTANTS: mmmfd_cust_01 TYPE mmpur_metafield VALUE 90000000.
LOOP AT ch_mapping ASSIGNING <mapping>.
CASE <mapping>-fieldname.
WHEN 'CLMNO'. <mapping>-metafield = mmmfd_cust_01.
ENDCASE.
ENDLOOP.
I created a function group - "ZMMPO1" and created the subscreen 9000 in that. I placed the custom field in that screen. Tha main program of ZMMPO1 is "SAPLZMMPO1".
I created a structure also - "ZMM_PO_CUST_SCREEN".
I want to know whether this is sufficient to display the tab on the screen or am I missing something.
It is mentioned that the implementation of "ME_PROCESS_PO_CUST" is a pre-requisite.
could you lemme know the process please.
Thanks,
Ram. -
Want to expand columns on planning screen for shipment
Dear All,
I need to expand 3 Z-field columns on planning screen for shipment. With Note# 400368, I need to add my Z-fields in structure VTTKD and apply them to the ALV grid with modifications of FM RV_SHIPMENT_VIEW, however, in my project, we cannot do any system modification that will affect by importing R/3 support package or upgrades...
Any other solution that I can take to expand 3 Z-fields to the ALV report?
I am looking for GuiXT tools, however, I don't know whether GuiXT can modify standard ALV report or not.. If anyone has experience with GuiXT, could you please show me which command I want to use in this case and how?
Thank you in advance!Hello Tiger,
>>1, How could Jet DB expand columns when connection with "HDR=No". It is possible?
We should know that “HDR=No” is used to configure whether the provider considers the first row to be column name or to be a normal data row. There is not other approach to set this configuration.
>> 2, How to remove the header as an workaround way?
With the oledb provider, it is not possible to avoid insert these header, my suggestion is that you could open the target inserted excel sheet, and remove first row manually which is fast and easy. Or to remove the first row through using Excel.Interop.dll.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
Hi, I 'm having tough time trying to figure out scaling options for my column chart. I have data in series. The chart does not start from Zero value. It starts from min value to max value. It is confusing sometimes. Also, the chart bars vary in size
-
Dba_registry table showing different versions.
Hi DBA's my database version is 9.2.0.6, but following are showing different versions, is there any cause to the database? Oracle XDK for Java 9.2.0.8.0 VALID Oracle interMedia 9.2.0.1.0 LOADED
-
I need help installing emacs 20.3.1. I have jdk 1.3 installed but when i go to complie a program using emacs it will not complie. I get this stuff at the bottom. Please help. I would really apprecate it. I am using windows xp. Thanks mdawg
-
Problem with Process 2012 in Bridge CS5
I can't use Process 2012 in CS5 Bridge. It always makes me go back to 2010. I think I have the latest ACR, and use this in LR4. Anyone else experience this? Thanks, Dave
-
Why is it that some PSD files won't display a visible thumbnail in Bridge? I increased the file size preference to 350megs and some 200+meg files still won't display as thumbnails. I have Bridge 2.1.1.9. Is there a more recent version? Don