I want to create recovery dvd for my pavilion g6-1228so

When I try using HP Recover Manager it asks for 4 x DVD...When I try to use type DVD+R, or DVD+RW it refuse these typ of DVD..Strange, so what type of DVD should I use???
This question was solved.
View Solution.

Hi,
You're welcome and merry Christmas to you as well
All the best,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Creating Recovery DVDs for Windows 8.1

I just bought the Lenovo C560 All-in-One and it came with Windows 8.1. I was able to use the One Key Recovery to create a backup file on my hard drive, that from what I've read appears to be the same as having a recovery disk. However, I'd also like to create the back up disks on DVDs incase for some reason something happens to the file saved on the hardrive.
I open OneKey Recovery, Click on System Backup, Go to Back up to "Hard Disk or Removeable Hard Drive", then when I browse for a new location it will only display C:\ as the only option.
Is it not possible to create back up DVD's for Windows 8.1?
Also the Lenovo Solution Center is telling me to download Lenovo Rescue and Recovery, but it seems like that is only for Winows 7 and earlier. Do I need to download Rescue and Recovery or is OneKey Recovery what I need to use?
I should also say, I've browsed through this form and Lenovo's support pages, but nothing I found seemed to be for systems that came with Windows 8.1. The posts I read all seemed to be about poeple who had upgraded to 8.1 from another OS.

Windows 8 will allow you to make backups/system images: https://www.youtube.com/watch?v=UHjRZdL_kUs
OKR will only recognized non-partitioned external HDDs 2 TB or less. If you have a 4 TB drive or a partitioned device then, OKR won't recognize the drive.
FYI: Trucrypt folder counts as a partition.
You should only need the OKR system.

Create recovery cds for HP Pavilion a410n

I had to reload PC from startup with f12 key. it reloaded the drive like new.
I was going to make pc recovery cds in case HD crashed.
CD Creator said there had already been a set made. I have not made a set since reloading HD.
My daughter may have made a set when i bought this for her she gave it back to me
Thanks

Hi,
Part of the OEM license ( this is when the operating system comes pre-installed with the PC ) only allows one set of Recovery Discs to be created, however you can order a replacement set of these discs using the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to create recovery disk for windows 8.1 after update from windows 8.

My laptop came with windows 8 and i have recovery discs for windows 8.
Now i've updated to windows 8.1, so i want to creat recovery discs for windows 8.1.
So in future when i use recovery discs i dont have to download windows 8.1 again.
Please tell me if there is any way to do this.....

As colakid posted, in Windows 8 the ability to create a recovery CD/DVD has gone. Your options are to:
create a recovery USB; or
create a recovery image.
Recovery USB
Colakid's post talks you through how to make a recovery USB: from control panel, choose Recovery, then Create a Recovery Drive, and follow the prompts.
However, the 'recovery USB' can be a bit misleading. When the wizard starts, there is an option to 'copy the recovery partition from the PC to the recovery drive'. If you do not check this option, you will still need installation media to reset your PC.
Since you have upgraded from Windows 8 to Windows 8.1, you will probably not be able to check this option, as it will be greyed out (like it is in the picture in Colakid's post).
If you go ahead and create the USB anyway, you will be able to boot to it, but you won't be able to reinstall Windows unless you have the installation media (or possibly a system image, though I haven't tried that).
Recovery image
The recovery image is an image of your computer that Windows will use when you select the 'refresh my pc' option. You can create a recovery image using the recimg.exe tool.
First, open an elevated command prompt (type cmd and press Ctrl + Shift + Enter).
Next, create the recovery image by typing:
recimg /createimage [path]
Where [path] is the folder you want the image in, eg C:\Recovery. You cannot set the file name - it will always be called CustomRefresh.wim.
Let it run its course. When it's done, you can check that it is the current recovery image by typing
recimg /showcurrent
It's important to keep in mind what a recovery image contains. It will have your Windows system files (in their current state), and the desktop apps you have installed (so it makes sense to do this after a fresh install of Windows). It will
not backup any Metro apps or user files, because these are not deleted during a system refresh. If you want a complete backup of everything on your computer the way it is now, you should make take a complete system image (which
can be done from the File History settings in control panel - at the bottom left there will be a 'System Backup Image' option - or you can do it using any other backup software like Ghost or Acronis).
In my case, I created the recover image straight after upgrading to Windows and it was about 6 GB.
Prepare/Create and register an recovery partition, so the option Copy the Recovery Partition becomes available in the recovery drive UI application.
In elevated command run> RECIMG -CREATEIMAGE C:\REFRESHIMAGE<
This will create a new custom.wim in a folder Refreshimage.
Now lets get ready to register the path of the image, so our create recovery drive option(COPY THE RECOVERY PARTITION FROM THE PC TO THE RECOVERY DRIVE) becomes available.
> In the folder you created there will be a> custom.wim<
change it to>INSTALL.wim<
> Create a folder In Cd/directory using Elevated command> mkdir c:\Win8.1-Recovery,>
Win81-Recovery<.
> Copy the INSTALL.WIM. Put in the Win81-recovery folder created.
> Run in elevated commad>REAGENTC /SetOSImage /Path C:\Win81-Recovery\INSTALL.WIM /Index 1<
Do not copy the arrows if using copy and paste, that is my way of pointing out lines of code
Information provided by the link below, thanks Keith. I simplified the process for easy following and added my own tweak from trial and error for the install.
blogs.technet.com/b/keithmayer/a···ive.aspx

Creating Recovery Discs for Win 7 - When Win7 Pro 64 is Preloaded from Win 8.1 Dowgrade Rights ?

Novice questions:
1. What is the proper procedure for:
Creating Recovery Discs for Win 7 Pro 64 - When Win 7 Pro 64 is "Preloaded by Lenovo from Win 8.1 Dowgrade Rights" ???
2. Will I then be able to use these Win 7 pro 64 - Recovery discs in the future should I need to "clean install Win7 Por 64 on the computer again ?
3. Also, If I use an Imaging Pgn like - Paragon Backup and recovery will I be able to reload win7 image and have win7 activated automatically just be restoring the Paragon backup image ?
JosephB
T61 6459-CTO - 15.4 WXGA - XP SP3
Solved!
Go to Solution.

JosephB wrote:
... BTW, when you perform the - Weekly "Macrium - Image Backups", do you backup to a local USB cable connected External Usb Drive or wireless wifi connected to a NAS Drive ?
I have a Verbatim 2TB external USB 3.0 drive plugged into the PC. It's used for both my weekly image backups as well as my nightly data backups. I have one of these on EACH machine in my environment, for backups local to that machine. I also use them on machines I build for friends and family, as everybody needs a backup system for "priceless data".
Actually, to be a bit more complete, my "data" backups consists of two parts: (1) 1st-of-the-month FULL backups of all my data, and (2) nightly INCREMENTAL backups which handles anything created/changed in the past 24 hours. Thus a "backup set" consists of the beginning FULL backup coupled with the ever-growing throughout-the-month set of nightly INCREMENTAL backups.
NovaBACKUP can handle all of this if you need to recover something, so you yourself don't need to know exactly which backup file your file is located on. You simply identify the folder/file(s) you wish to recover, and the AS-OF date you want for that file (with "as of the latest version available" being the default). If you want to recover an older version than the most current version, you simply slide a GUI time-slider backwards until you arrive at the as-of date you desire. NovaBACKUP then figures out where the most current version is AS OF THE DESIRED DATE, and accesses that one-or-more backup files in order to complete your task.
I retain multiple "backup sets" (going back 4 complete months), so I can recover any folder/file(s) I had available on any specific night during the past 4 months. Most commonly of course it's typically "get me the most current version available as of last night", but just in case that version is corrupt or I truly want an earlier version, I can get it easily.

I want to create a DVD of JPEG images

I want to create a DVD of JPEG images from multiple albums in my catalog. I am using Windows 7 and Premier Elements 11. I have not been able to insert more than one menu marker in my "video." Any suggestions?

BobHabig32453
I seldom ran across a question to which I could offer an abridged answer. Sorry about that.
There is an assortment of miscellaneous information to guide your path as to what you can and cannot do with regard to a Premiere Elements DVD Template that represent the Main Menu and Scene Menu set. The number and kind of menu markers that you place on the Timeline are linked to the Menus - Main Menu or Scene Menu depending whether you have placed a Main Menu Marker or Scene Marker on the Timeline. Again, do not put a Stop Marker at the end of the last file on the Timeline.
Each movie (in your case album) cannot have its own Scene Selection page or pages. All the Timeline scene markers representation found on the Scene Selection page or pages is there in the order that each was placed on the Timeline. There is a limited amount of space under each scene thumbnail, and you do want to avoid button overlap.
Each main menu and scene menu that came with the program is designed with a certain number of buttons per page (Main Menu page or Scene Selection page). When the number of Timeline markers exceed the number of designed in buttons per page, the buttons spill over to additional pages (each a copy of the first).
Most Main Menu pages come with Play All button, Scene Selection button, and some with Main Menu or Bonus Movie button. Most are text type buttons, fewer are thumbnail type buttons for this Main Menu. You see the thumbnail type buttons in the Scene Selection Page, and typically the maximum number there is about 6, may goes to 8 in some rare instances.
Once you introduce Stop Markers to separate the multi movie type setup, your Play Movie (Play All) button on the Main Menu is meaningless. And, the reminder, two menu markers cannot occupy the same spot on the Timeline.
Important to the project are the pixel dimensions of the photos and the duration of the content. If you are heading for DVD-VIDEO on DVD disc Standard or Widescreen, the pixel dimensions should not exceed 1000 x 750 pixel (landscape) – classical recommendation here and elsewhere. Greater than that typically does not accomplish much other than stressing out the program. The level of computer resources can often dictate whether the program stress will set in sooner or later. That 1000 x 750 which is not written in stone is close enough to the export standard and will leave some room for pans and zooms if needed. Look to the Premiere Elements burn dialog prior to burn to and look at the Quality Section’s values for Space Required and Bitrate. The DVD-R 4.7 GB/120 min is in reality 4.3 GB and the “for best results” classical recommendation is not to exceed 90 minutes for this type of disc. There is also the DVD double layer disc 8.5 GB (really 7.3 GB)/240 minutes to think about.
How does this all impact what you outlined for what you would like to do? Many thoughts on that, but for starters:
Are your photos sized properly for a NTSC or PAL DV Standard or Widescreen project? Are you heading for NTSC or PAL DVD-VIDEO Standard or Widescreen? Are you considering Blu-ray disc format on Blu-ray disc in this regard for your Premiere Elements project.
How many albums do you envision in each of your planned DVD discs. I suspect the number is going to be in excess of 6 or 8. Here some of the considerations might be:
…switch the names of the .psd files for the main and scene menu (just the names) so that you can take advantage of the larger number of scene buttons on an already designed Scene Menu. The Timeline markers are Main Menu Markers in this instance, no Scene Markers. Result: One page Main Menu with thumbnails there displaying the first photo in each album.
…editing the .psd file for a DVD Template to add more buttons to the design. That requires strict adherence to requirements for doing that, including editing with Photoshop CS and later or a version of Photoshop Elements that will open the Layer Groups of the .psd so that you can get at the Folders and Files that you need to modify/duplicate and the like.
If you wanted text buttons instead of thumbnail buttons, you could look at a DVD Menu such as Faux Widescreen Main Menu Page and customizing that.
Not sure if long trip descriptions (text) would be feasible. I can offer a how to for creating a page for information before the main menu (like those FBI notices) if you thought that might be appropriate for any overview trip descriptions per disk. Lots of details, Lots of choices, but often with limitations and special considerations if you are restricted to what comes as is with the program.
Please review the above and then we could fine tune with more specifics.
Thanks.
ATR

CREATING RECOVERY DVDs/MEDIA

I recieved an L555D-S7932 Laptop from HHGregg"s for a Christmas present and have been reading these little phamplets which to me aren't what I expected. I would have expected a manual not 3 little phamletss. I have many questions that I would love to have answered.
On the QUICK TOUR HARDBACK PAPER ON THE BOTTOM right hand corner It states on how to create recovery DVDs/media, see the "Creating Recovery section in the users guide. I have 3 little phamlets that in no such form tell me where to go to to do this. I asked my mother about it and she told me when you buy a computer you always get them with your purchase. I didn't get any.
1. CAN YOU USE A FLASH STICK INSTEAD?
2. DOES IT MATTER WHETHER YOU USE A FLASH STICK OR DVD FOR CREATING A RECOVERY DISK?
3. SO DO I DO THIS BEFORE EVER TURNING ON THE INTERNET AND JUST TURNING ON THE LAPTOP?
4. HOW DO I CREATE THIS AND WHERE DO I START?
5. ON THE BOTTOM OF THE PAPER Need Help?

Satellite L555D-S7932
The User's Guide is here.
Satellite L550 Series User’s Guide
It's on your hard drive as well.
-Jerry

Factory recovery DVD for HP 625 laptop

I want to make factory recovery DVD for HP 625 laptop, However I cannot find HP RECOVERY MANAGER on computer.
Its a new computer with windows 7 installed.
Thanks

ftp://ftp.hp.com/pub/softpaq/sp45501-46000/sp45602.exe
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

I want to create home page for my application with short URL

I want to create home page for my application with short URL
as when I want user to use my application user must go to URL like this
http://127.0.0.1:7101/My-Project/faces/app/empModule/allEmployees/viewMyEmployees.jspxI want the user to use short URL , How can I use shorter URL not all this one.
I want shorter URL for my application not to write full path .
thanks in advance.
Edited by: user611775 on Oct 31, 2010 10:21 PM

Well,
it's up to you. The first part (Mcit-Project-ViewController-context-root) is the context root which you define in the view controller project. 'faces' is the name the servlet filter reacts on. You can't omit it but shorten it in web.xml. The rest is your directory structure. I'm not sure how to shorten this other as to move the jspx files back into the web root folder.
By the way an ADF faces app never uses the .jspx at the end of the url. If you specify '.jspx', you only render the page but don't start the work flow.
Timo

Want to create program (XYZ) for scheduling anther program(ABC)

Requirement :
I have one report ABC and I want to create program XYZ for scheduling the report ABC (without executing the program ABC ).
Output : Program XYZ
1) schedule the report ABC
2) Provide the output of ABC

Seee if the below code help:
REPORT Z_MQSCHD NO STANDARD PAGE HEADING LINE-SIZE 170 LINE-COUNT 58 .
DATA: ZCOUNT            LIKE SY-TABIX,
      JOBNAME           LIKE TBTCJOB-JOBNAME,
      PARAMS            LIKE PRI_PARAMS,
      JOBCOUNT          LIKE TBTCJOB-JOBCOUNT,
      AUTHCKNAM         LIKE TBTCJOB-AUTHCKNAM,
      SDLSTRTTM         LIKE TBTCJOB-SDLSTRTTM,
      SDLSTRTDT         LIKE TBTCJOB-SDLSTRTDT,
      VARIANT           LIKE RALDB-VARIANT,
      REPORT            LIKE SY-REPID,
      ZTIME             LIKE SY-UZEIT,
      PREDJOB_CHECKSTAT LIKE TBTCSTRT-CHECKSTAT,
      PRED_JOBCOUNT     LIKE TBTCJOB-JOBCOUNT,
      PRED_JOBNAME      LIKE TBTCJOB-JOBNAME,
      RELEASED          LIKE BTCH0000-CHAR1.
*email variables
DATA: emailaddr(80)     TYPE c.
data: objtxt           like solisti1   occurs 10 with header line.
data: tab_lines        like sy-tabix.
DATA: OBJECT_HD_CHANGE LIKE SOOD1.
DATA: OBJECT_TYPE LIKE SOOD-OBJTP.
DATA: OBJCONT LIKE SOLI OCCURS 0 WITH HEADER LINE.
DATA: RECEIVERS LIKE SOOS1 OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN: BEGIN OF BLOCK A1 WITH FRAME TITLE TEXT-001.
PARAMETERS:
        NAME LIKE RS38M-PROGRAMM OBLIGATORY,
        VAR LIKE RS38M-SELSET OBLIGATORY,
        JOB LIKE TBTCJOB-JOBNAME,
        FRQ1 LIKE SY-INDEX,
        FRQ2(2) TYPE C.
SELECTION-SCREEN END OF BLOCK A1.
SELECTION-SCREEN: BEGIN OF BLOCK A2 WITH FRAME TITLE TEXT-002.
PARAMETERS: ZDATE LIKE SY-DATUM DEFAULT SY-DATUM OBLIGATORY.
SELECT-OPTIONS:
        TIME1 FOR SY-UZEIT OBLIGATORY.
SELECTION-SCREEN END OF BLOCK A2.
SELECTION-SCREEN: BEGIN OF BLOCK A3 WITH FRAME TITLE TEXT-003.
PARAMETERS: p_mail       AS CHECKBOX DEFAULT 'X'. "X = Mail report
SELECT-OPTIONS: so_mlist FOR emailaddr.
SELECTION-SCREEN END OF BLOCK A3.
AT SELECTION-SCREEN ON FRQ2.
IF FRQ2 NE 'H' AND FRQ2 NE 'M' AND FRQ2 NE 'S'.
    MESSAGE E001(Z1) WITH 'Time Unit must be H or M or S'.
ENDIF.
AT SELECTION-SCREEN ON ZDATE.
IF ZDATE < SY-DATUM.
    MESSAGE E001(Z1) WITH 'Date must be greater than current date'.
ENDIF.
AT SELECTION-SCREEN ON TIME1.
IF ZDATE = SY-DATUM AND TIME1-LOW < SY-UZEIT.
    MESSAGE E001(Z1) WITH 'Time must be greater than current time'.
ENDIF.
AT SELECTION-SCREEN OUTPUT.
IF JOB IS INITIAL.
    JOB = NAME.
ENDIF.
$$* Start of selection
START-OF-SELECTION.
IF JOB IS INITIAL.
    JOB = NAME.
ENDIF.
clear params.
call function 'GET_PRINT_PARAMETERS'
       EXPORTING
            mode           = 'CURRENT'
            no_dialog      = 'X'
       IMPORTING
            out_parameters = params.
params-paart = 'X_PAPER'.
ZTIME       = TIME1-LOW.
JOBNAME      = JOB.
VARIANT      = VAR.
REPORT       = NAME.
AUTHCKNAM    = SY-UNAME.
PARAMS-PRIMM = SPACE.
SDLSTRTDT    = ZDATE.
CLEAR: ZCOUNT.
WHILE ZTIME LE TIME1-HIGH.
    SDLSTRTTM = ZTIME.
    CALL FUNCTION 'JOB_OPEN'
         EXPORTING
              JOBNAME = JOB
         IMPORTING
              JOBCOUNT = JOBCOUNT
         EXCEPTIONS
              OTHERS   = 4.
    CALL FUNCTION 'JOB_SUBMIT'
         EXPORTING
              AUTHCKNAM = AUTHCKNAM
              JOBCOUNT = JOBCOUNT
              JOBNAME   = JOB
              PRIPARAMS = PARAMS
              REPORT    = REPORT
              VARIANT   = VARIANT.
    CALL FUNCTION 'JOB_CLOSE'
         EXPORTING
              SDLSTRTDT        = SDLSTRTDT
              SDLSTRTTM        = SDLSTRTTM
              JOBCOUNT         = JOBCOUNT
              JOBNAME          = JOB
         IMPORTING
              JOB_WAS_RELEASED = RELEASED.
    IF RELEASED = 'X'.
      WRITE: / 'Job', JOBNAME, '(' ,JOBCOUNT, ')' ,'will run at', ZTIME,
          'on', ZDATE, 'with program',NAME, 'and variant', VAR.
      IF NOT P_MAIL IS INITIAL.
        CLEAR OBJCONT.
        CONCATENATE
        'Job' JOBNAME '(' JOBCOUNT ')' 'will run at' ZTIME 'on' ZDATE
       'with program' NAME 'and variant' VAR
        INTO OBJCONT SEPARATED BY SPACE.
        APPEND OBJCONT.
      ENDIF.
    ELSE.
      WRITE: /
     'Unable to release job', JOBNAME, '(' ,JOBCOUNT, ')' ,'at', ZTIME,
        'on', ZDATE, 'with program',NAME, 'and variant', VAR.
      IF NOT P_MAIL IS INITIAL.
        CLEAR OBJCONT.
        CONCATENATE
       'Unable to release job' JOBNAME '(' JOBCOUNT ')' 'at' ZTIME
       'on' ZDATE 'with program' NAME 'and variant' VAR
        INTO OBJCONT SEPARATED BY SPACE.
        APPEND OBJCONT.
      ENDIF.
    ENDIF.
    CASE FRQ2.
      WHEN 'H'.
        ZTIME = ZTIME + ( 60 * 60 * FRQ1 ).
      WHEN 'M'.
        ZTIME = ZTIME + ( 60 * FRQ1 ).
      WHEN 'S'.
        ZTIME = ZTIME + FRQ1.
      WHEN OTHERS.
    ENDCASE.
ENDWHILE.
IF NOT P_MAIL IS INITIAL.
    CHECK NOT SO_MLIST IS INITIAL.
    PERFORM SENDEMAIL.
ENDIF.
*&      Form SENDEMAIL
      text
--> p1        text
<-- p2        text
FORM SENDEMAIL.
clear objcont.
append objcont.
append objcont.
concatenate
'This e-mail was sent from an automated system...' sy-sysid sy-mandt
     into objcont.
append objcont.
clear objcont.
objcont = 'Do not reply to this message.'(013).
append objcont.
MOVE: SY-LANGU TO OBJECT_HD_CHANGE-OBJLA,
        'NOTIFICATION' TO OBJECT_HD_CHANGE-OBJNAM,
        'Report from job scheduler' TO OBJECT_HD_CHANGE-OBJDES.
MOVE 'RAW' TO OBJECT_TYPE.
describe table objtxt lines tab_lines.
read table objtxt index tab_lines.
*Now we will create the packing list entry for our text body.
describe table objtxt lines tab_lines.
read table objtxt index tab_lines.
OBJECT_HD_CHANGE-OBJLEN = tab_lines * 255.
*in this next section we create our recipient list.
LOOP AT so_mlist.
    clear RECEIVERS.
    move so_mlist-low to RECEIVERS-RECEXTNAM.
    MOVE 'U' TO RECEIVERS-RECESC.
    APPEND RECEIVERS.
    if not so_mlist-high is initial.
      move so_mlist-high TO RECEIVERS-RECEXTNAM.
      MOVE 'U' TO RECEIVERS-RECESC.
      APPEND RECEIVERS.
    endif.
ENDLOOP.
CALL FUNCTION 'SO_OBJECT_SEND'
       EXPORTING
            OBJECT_HD_CHANGE           = OBJECT_HD_CHANGE
            OBJECT_TYPE                = OBJECT_TYPE
       TABLES
            OBJCONT                    = OBJCONT
            RECEIVERS                  = RECEIVERS
       EXCEPTIONS
            ACTIVE_USER_NOT_EXIST      = 1
            COMMUNICATION_FAILURE      = 2
            COMPONENT_NOT_AVAILABLE    = 3
            FOLDER_NOT_EXIST           = 4
            FOLDER_NO_AUTHORIZATION    = 5
            FORWARDER_NOT_EXIST        = 6
            NOTE_NOT_EXIST             = 7
            OBJECT_NOT_EXIST           = 8
            OBJECT_NOT_SENT            = 9
            OBJECT_NO_AUTHORIZATION    = 10
            OBJECT_TYPE_NOT_EXIST      = 11
            OPERATION_NO_AUTHORIZATION = 12
            OWNER_NOT_EXIST            = 13
            PARAMETER_ERROR            = 14
            SUBSTITUTE_NOT_ACTIVE      = 15
            SUBSTITUTE_NOT_DEFINED     = 16
            SYSTEM_FAILURE             = 17
            TOO_MUCH_RECEIVERS         = 18
            USER_NOT_EXIST             = 19
            ORIGINATOR_NOT_EXIST       = 20
            X_ERROR                    = 21
            OTHERS                     = 22.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " SENDEMAIL

I want to buy recovery disk for T61

Hello
I want to buy recovery disk for My Thinkpad T61. How do I do? Thanks

Call the US Support Center at 1-800-426-7378 (24 hours a day, seven days a week).

Want to create F1 Help for radio button in my report

Hi All,
I want to create F1 Help for radio button in my report program. Which function module should i call in <b>at selection screen on help-request</b>
Also do I need to define the texts somewhere or I can pass it directly to the function module.

Try DYN_FIELD_F1_HELP,
~Suresh
that is only for Dic fields..
Pl take alook at this<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a243d9b511d1950e0000e8353423/frameset.htm">SAP Help</a>
~Suresh
Message was edited by: Suresh Datti

I want to create a SWF for my small web site. How do I do this? Do I need to purchase "Flash Builder"?

I want to create a SWF for my small web site. How do I do this? Do I need to purchase "Flash Builder"?

Hi Developer_46038,
if for example all the properties and object are stated as list, i think there is a tool that overcome cross list.
http://listrollup.codeplex.com/
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/13a51be5-4007-46e8-bbb2-5e04320dfebd/cross-list-webpart?forum=sharepointcustomizationlegacy
you can also using dataview webpart to show the cross lists:
http://office.microsoft.com/en-us/sharepoint-designer-help/create-a-data-view-HA010094804.aspx
http://office.microsoft.com/en-us/sharepoint-designer-help/connect-two-data-views-HA010169133.aspx
3rd party: http://community.bamboosolutions.com/blogs/bambooteamblog/archive/2009/03/11/relational-database-capabilities-for-sharepoint-lists-cross-list-web-part.aspx
but i am not quite sure how crystal report will do, if you can make the crystal report as also list, i think its possible,
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/8247edf5-dee8-49d8-b7ee-9e49bfd97b9b/crystal-report-in-sharepoint-2010-webpart?forum=sharepointdevelopmentprevious
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

I want to create this DVD in iDVD but...

I created a project in iMovie and every time I try to share it by publishing it in Media Browser or iDVD during and after a few hrs of it's upload iMovie quits unexpectedly every time before it finishes. And I've been trying to create this DVD for months. At first the movie project was ready to burn on iDVD, and during the burning process it stopped, saying there was a problem with multiplexing or something it it would not finish burning the movie. I have since did some adjustments on the project, and now iMovie quits after several hrs the publishing process, so I can't even see if the iDVD burning will work if I tried it again because iMovie won't complete the publishing process, it "unexpectedly quits" every time..

Your target size for free space available on your Mac HD is around 25GB at a minimum for DVD project burning. To find out how much free space is available go to your Mac HD, hold down the Option key and click on the icon. Choose Get Info.
The field you are most interested in looking at is the one titled Available: which tells you how much free space you have. If you are over 25GBytes available, you're not running out of hard drive space to create the DVD project.

Need recovery DVD for Satellite C660-2FF

Hi,
i need a recovery DVD for Satellite C660-2FF. HDD crashed.
Win 7 product key is available.
Who can help? maybe .iso download?
thanks

Recovery image cannot be downloaded and if you need original recovery disc you can order it on https://backupmedia.toshiba.eu/landing.aspx

I want to create recovery dvd for my pavilion g6-1228so

Similar Messages

Maybe you are looking for