I want to delete VM fusion and windows 7 then install windows 7 with bootcamp, how do I do this?  Help Please!!

I am running VM Fusion firm ware and windows, so I can check my military email form time to time and esign documents from time to time.  But it is way way too slow, Can anyone tell me how to delete the firm ware and windows and then use bootcamp to run windows? Please help!

1. Are you backing up your entire drive? If yes, it will include you Mac and the VM, both, unless you specifically excluded.
2. In a nutshell, leave your VM intact, if you have about 50-100GB free on the current hard disk.
3. You can install Windows via Bootcamp on the existing disk, provided #2 is true.
4. What type of a Mac do you have, the year/model would help fill in more specific details.
5. The steps to install Windows via Bootcamp are
     a. Run Application -> Utilities -> Bootcamp Assistant.
     b. It has three check boxes, which will download Windows drivers which support Apple hardware, partition you disk, and install windows
          using the install media. Depending on #4, it may require using a USB2 flash drive of 8/16 GB.
     c. Once you have Windows installed, you may need to install drivers that support Apple Hardware.
     e.  You can transfer files from your VM to your Bootcamp Windows installation. At this point you can delete the VMwar
          Windows, if you like.
     f. Please be aware that to run Windows under Bootcamp would require selecting Windows and rebooting the Mac overtime you want to switch between OSX
         and Windows.
This is the quickest set of steps that will have Windows running.

Similar Messages

  • I have a problem with my mac  i have too many  archives and programs and i want to delete all files and start at the begin my mac with out do format

    i have a problem with my mac  i have too many  archives and programs and i want to delete all files and start at the begin my mac with out do format

    I do not recommend reformatting your harddrive and reloading your software.  This is a Windows thing. On an older mac it may be difficult to find all your software again.
    Best to have greater than 2gig of free space.  Many posters to these forums state that you need much more free space: 5 gig to 10 gig or 10 percent of you hd size.
    (0)
    Be careful when deleting files. A lot of people have trashed their system when deleting things. Place things in trash. Reboot & run your applications. Empty trash.
    Go after large files that you have created & know what they are.  Do not delete small files that are in a folder you do not know what the folder is for. Anything that is less than a megabyte is a small file these days.
    (1)
    Run
    OmniDiskSweeper
    "The simple, fast way to save disk space"
    OmniDiskSweeper is now free!
    http://www.omnigroup.com/applications/omnidisksweeper/download/
    This will give you a list of files and folders sorted by size. Go after things you know that are big.
    (2)
    These pages have some hints on freeing up space:
    http://thexlab.com/faqs/freeingspace.html
    http://www.macmaps.com/diskfull.html
    (3)
    Buy an external firewire harddrive.
    For a PPC computer, I recommend a firewire drive.
    Has everything interface:
    FireWire 800/400 + USB2, + eSATA 'Quad Interface'
    save a little money interface:
    FireWire 400 + USB 2.0
    This web page lists both external harddrive types. You may need to scroll to the right to see both.
    http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
    (4)
    Buy a flash card.

  • Just  bought a new phone and want to delete everything off my old phone so I can sell it. How do I do this?

    just  bought a new phone and want to delete everything off my old phone so I can sell it. How do I do this?

    Read here...
    What to do before selling or giving away your iPhone, iPad, or iPod touch

  • I want to change the sharing and permissions of a large number of photos. How can I do this in bulk rather than one at a time?

    I want to change the sharing and permissions of a large number of photos. How can I do this in bulk rather than one at a time?

    Does this involve iPhoto in some way?

  • TS2972 when i ask for Authorizeed computer i got the message " make sure your computer' date is set correctly and that it accepts cookies from the itunes stores " how can i solve this problem please .

    when i ask for Authorizeed computer i got the message " make sure your computer' date is set correctly and that it accepts cookies from the itunes stores " how can i solve this problem please .

    Ok, so I just worked out that itunes communicates through your browser so it's a cookie in the browser not PC direct that fixes this.  Bit of a convoluted route but for me it was IE>Internet setting>privacy>sites, then allow all activity from apple.com/itunes.

  • I have XP and windows 8 with bootcamp. what happen if I delete W8. Xp still boot up after deletion?

    Hi all!
    i have XP and W8 With bootcamp. Can I delete completely W8 and XP still Boot up?
    Thank for your answer.

    I have not used multiple drives so can not speak from experience. From this community I have learned that one needs to remove all drives except the one to receive a Boot Camp/Windows installation.
    I think this would be the most prudent way for you to remove Win 8 from the 2nd HD. Remove drives 1 and 3 then boot into drive 2 Mac OS X 10.7 and use Boot Camp Assistant to remove the BC/Win partition.
    Another option can be used if you have an adequate sized external HDD. Clone the Mac 10.7 partition with Carbon Copy Cloner or SuperDuper to the external drive. Then boot from this external drive and use Disk Utility to reformat the internal drive as Mac OS Extended (Journaled) with GUID Partition Table. Then clone the external drive with 10.7 back to the original internal drive.

  • HT1452 I want to reset the permissions on a western digital external hard drive to work between mac and windows... How can I do this easily?

    I have a MacBook Pro and have recently bought a Western Digital external hard drive.  I used it on my windows laptop first and unfortunately now on the Mac it is read only.  How can I set it so that I can use it successfully between the both the Mac and windows laptop?
    Thanks

    MacQuack wrote:
    You will need to pull all the information off first. The formatting will erase it all.
    Use Disk Utility (in Applications >> Utilities or use Spotlight to find it). On the left select your WD drive and then select the Erase tab. Where it says Format, select exFat in the drop-down menu. Next, click Erase and done. It will take approx. 5-15mins to re-format.
    Cons: You will be unable to store files 4GB or larger in this format (usually only dmg/iso files or large Outlook files). Also, you will be unable to use Time Machine or other auto-backup programs.
    That is not entirely correct, there is no 4G limit using exFat, FAT32 is the one with the limit.

  • Macbook pro mid 2009 compatible with mountain lion and windows 8 with bootcamp

    I want to install window 8 pro on bootcamp....which format should i use for brand new hd and is it this all compatible.....thanks

    Is the harddrive in the macbook or external and yes it will install windows 8. however there are people having issues with their macbooks not turning the fan speed up high enough to keep it cool. Windows 7 works with the fans properly however.

  • I have an Airport Extreme and want to extend my connection and have a printer connected to the express. How do I do this??

    I have been looking on all the forums to see how this can be done. I would like to do this wirelessly as the Extreme is on the first level and express in the office with the printer. Could someone please walk me through the steps to do this. Can I connect my speakers wirelessly to the express as well?
    Thanks

    I have been looking on all the forums to see how this can be done. I would like to do this wirelessly as the Extreme is on the first level and express in the office with the printer. Could someone please walk me through the steps to do this.
    Please check out the following Apple Support article for details on how to configure your AirPort for an extended network.
    Can I connect my speakers wirelessly to the express as well?
    No, not by a wireless connection. They would need to be connected to the AirPort Express' audio port using an appropriate (analog or digital optical) cable as required by your speakers.

  • I want to delete/uninstall an older version to bring up the newest version. How do I do this?

    What more details do you need? I want to uninstall an older version of Firefox and install 4.0X. But cannot seem to be able to get rid of 3.04

    OK, here I am replying to myself but perhaps others may gain from this solution. Remember, this original post was "how to stop Adobe preventing me from installing an older version and forcing me to take the latest version...". I just wanted to re-install an older version to prevent big CPU usage and stuttering video. Well, this is what fixed it for me an allowed me to install Adobe Flash V9...
    Assuming you have properly uninstalled Adobe Flash Player v10.n, you need to remove a folder and files from your registry. If you are unhappy to do this, then ask an expert - the registry is not somewhere you want to get lost in. I am also assuming you have the correct system permissions, Anway this is what I did:
    1. Go to start button and find (and run) REGEDIT.EXE
    2. Rather than give you a specific path to follow, it is best to simply use REGEDIT to find the folder by clicking "Edit" then "Find".
    3. You are looking for a folder called "SafeVersions".
    4. When you find it, it may show a number of safe versions (previous loads of the player).
    5. From the left window pane, right click on the aforementioned folder then click "Delete"
    6. Respond to any prompts you might get, like, "do you want to do this..." etc.
    7. Close down all applications in the normal manner and reboot.
    8. When restarted, go back on line and download the V9 (or whatever version you want). You'll know its a good 'un as it loads in a fraction of the time.
    9. Go back to your web page or whatever and, hey presto, everything is back to what it was before that hungry V10.n was uploaded.
    Hope that helps, it might be nice if the Adobe uninstaller deleted this registry entry, but it doesn't - or at least in Win7 on my PC, it didn't.
    Let me know it the above works for you.
    Thanks and good luck

  • Mini DVI to VGA in Mac and Windows XP with Bootcamp

    I just bought 13in MacBook the first time so I am new with this system.
    I am trying hook up MacBook Mini-DVI output to Panasonic th-42pd25up (EDTV) with VGA input for PC. I hooked it up using Apple's Mini DVI to VGA adapter to TV. (TV also has HDMI input which TV manual says not to use it.
    TV's resolution are :
    640x480 for 4:3 aspect ratio
    852x480 for 16:9 aspect ratio
    I have two problems watching streaming video at 300 to 700mbp of soccer or cricket sport broadcasts.
    1. In Mac system, I only get blue screen of computer on TV with out any writing or pictures or tool bar.
    2. In Microsoft XP using BootCamp I get "no signal" on TV. Would I have success using Parallels software?
    I am missing some important games!!!
    Thanks for any guidance give me.

    MB560 wrote:
    1. In Mac system, I only get blue screen of computer on TV with out any writing or pictures or tool bar.
    This is normal in extended desktop. You can drag anything you want from the main screen to the external screen. I prefer it this way when I am watching MLB.TV. I keep the game on my external and use my internal work surfing and other stuff.
    You can use the F7 key to switch back and forth

  • Want to uninstall Acrobat 10 from 1 computer, then install on a different computer - how do I do it?

    hi, I have Acrobat 10, use it on 2 computers as per the license.
    I am giving one computer away, would like to keep my Acrobat 10 access and use on a different laptop.  I have the serial numbers etc.
    How do I do it? Can I do it?

    On the machine that you are getting rid of, open the application and choose Help -> Deactivate.  That is the minimum you need to do at your end.  If you want to free up the drive space for the next person to use it then you can uninstall it, but your concerns ended with the deactivation.
    Once you have the extra activation available you can activate the installation on whatever new machine you install it on.

  • I have just run ClamXav and it has detected a trojan Bredolab-2. How do I remove this please?

    I have just run ClamXav and it has detected a Bredolab-2 trojan. How do I remove this Trojan please and is it an issue for a MAC?
    Thanks in advance.

    If you are running v10.6.7 as your profile indicates, you can update to v10.6.8 which includes malware protection.
    About the Mac OS X v10.6.8 Update
    Mac OS X 10.6.8 Update

  • Me and my wife both have iPhone for iTunes I use same laptop now our contacts are all mixed up. I want to delete our old synchronize a/c. To start up freshly. How can I do that?

    Me and my wife both have iPhone for iTunes I use same laptop now our contacts are all mixed up. I want to delete our old synchronize a/c. To start up freshly. How can I do that?

    Anyone at all can advise- still not sorted :-(

  • I have a few hundred duplicates in my iPhoto library, but the file sizes are different.  So one is 1.3mb and one is 567kb.  I want to delete the smaller ones, but short of comparing each duplicate, is there a way to do this?

    I have a few hundred duplicates in my iPhoto library, but the file sizes are different.  So one is 1.3mb and one is 567kb.  I want to delete the smaller ones, but short of comparing each duplicate, is there a way to do this?  I've been looking at Duplicate Annhilator but I don't think it can do it.
    Thanks!

    I just ran a test with iPhoto Library Manager, Duplicate Annihilator, iPhoto Duplicate Cleaner, Duplifinder and Photodedupo.  I imported a folder of 5 photos into a test library 3 times, allowing iPhoto to import duplicates.  I then ran the 5 photos thru resizer to reduce their jpeg compression but all other aspects of the file the same.
    None of the duplicate removal apps found set that was reduced in the file resizer. That's probably due to the fact that the file creation date was being used as a criteria and the resized photo would have a different file creation date even though the Image Capture date was the same.
    They all found the 3 regular duplicates and some of them would mark two and leave the 3rd unmarked.  iPhoto Duplicate Cleaner can sort the found duplicates by file size but if the file was edited to get the reduced file size it might not be found as it would have a different file creation/modification date. 
    iPhoto Library Manage was able to find all duplicates and mark them as such if the file names were the same the the filename option was selected.  Otherwise it also missed the modified, resized version.  It allowed one to select the one photo to save before going to work on the library.
    So if a photo has been reduced in image quality or pixel size it will not be considered a duplicate.
    OT

Maybe you are looking for

  • Line item not copied in SDF /KN when creating based on Return order

    Hi, Anybody , can help me? I try to replace a damaged good returen by the customer,by doing the follwing actions. 1 Creat return order based on orginal oder. 2. Try  to create SDF/KN based on Return oder, but line item is  not copied. How can solve t

  • Liabilities Ageing report not acknowledging old journal entries

    Hello, I have just upgraded a system from 2007A SP00 PL48 to 8.8 SP00 PL17.  When I ran the Vendor Liabilities report in 8.8 I noticed that one of the business partners has a journal entry and an open invoice.  The journal entry has no value when dis

  • Help with scrolling images/text

    I have created a web site already and know how to add scrolling text to my site, however I can't figure out how to insert images into my scrolling text. Can any one help? Thank you!

  • Save Doesn't Work in Dw CS3

    All of a sudden Save no longer works in Dreamweaver CS3 on an XT(2) PC. At first I tried Control-S and thought that something was grabbing the control character - but it doesn't even work from the drop down Menu File/Save. What is weird is the Save A

  • Item number to be regenerated when copying from contract to sales order

    Hi, I am copying items from contract to sales order, say there are 10 items in contract. I copy all items leaving 5th & 7th item in contract. The numbers in sales order has to be in sequence (regenerated leaving the 5th & 7th line item) rather than i