I want to deployment virtual machine by Hyper-V with windows 2012 server

I want to deployment virtual machine by Hyper-V with windows 2012 server. So I need step by step guide line with screenshot and video link.
Thanks,
Qamrul

Hi Qamrul,
Additionally here is the link for hyper-v getting started guide (server2008 ) :
http://technet.microsoft.com/en-us/library/cc732470(v=ws.10).aspx
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

How to Install Hyper-V on a Virtual Machine in Hyper-V on windows 2erver 2012 R2 ?

Hi ,
anybody know How to Install Hyper-V on a Virtual Machine in Hyper-V on windows 2erver 2012 R2 ?
I want to create lab but i couldn't I follow this article but the new VM is off
http://blogs.technet.com/b/gbanin/archive/2013/06/26/how-to-install-hyper-v-on-a-virtual-machine-in-hyper-v.aspx
one of hyper-v component is not running
thanks

Previously it has been blocked to install Windows Server in the VM and then add the Hyper-V Role.
However, it has always been possible to install Hyper-V Server inside a VM. (the free Hyper-V Server SKU)
The Hyper-V Server VM is fully manageable, but it cannot start any VMs.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

Vhd has the sama function as virtual machine or hyper-v in windows 8

hi,
is VHD has the same function as hyper-v or virtual machine. if yes then I can make virtual machine from windows 7 home premium if the hardware support it.
thanks
johan
h.david

All VHDs are Virtual Machines and have the same function since they emulate a hardware environment, but they are not compatible between the different VM software. They each have their own structure and are not directly compatible. There are utilities
that can be found on the internet that claim to export or import VMs from varies different VM software.
Windows 7 XP Mode and Virtual PC use the same structure, but Hyper-V is a different structure.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Type 2 Virtual Machine in Hyper-V will not PXE boot with WDS

Hi
Bit of a wierd scenario this but I'm doing a bit of a lab experiment kind of thing. The setup is as follows:
VMWare Workstation 10 with Windows Server 2012 R2 running as a virtual machine. In VMW10 I have a NAT network interface and a Bridging interface set to load with the virtual machine. These seem to work fine (although the NAT doesn't seem to want to connect
to the internet but that's why the bridging one is there in addition).
Server 2012 is configured with the following roles:
ADDS, DHCP, DNS, Hyper-V, Printer, WDS
I have correctly configured WDS to work on the same machine as DHCP and I can get PXE boot working with WDS on a Type1 Virtual Machine in Hyper-V using the Legacy Network adapter. My problem is when I try and PXE boot on a Type2 Virtual Machine (this type
is new in R2 and should eliminate the need for a legacy network adapter) using the same network interface that I used for the Type1 machine, I get an IP address from DHCP but WDS doesn't seem to respond. Instead I get the "PXE-E16: No Offer Received"
message. I have tried just about everything I can think of and spent the whole day trying to figure out why this is the case but came up with nothing. Has anyone else encountered this or can anyone shed any light on the matter?
Many thanks in advance

"VMWare Workstation 10 with Windows Server 2012 R2"and "Server 2012 is configured with the following roles: ADDS, DHCP, DNS, Hyper-V, Printer, WDS"
Hyper-V is not supported to be run as a VM. It is a Type 1 hypervisor, which means it works on the bare metal. You have it running as a VM on a Type-2 hypervisor, so it has no access to the bare metal. Yes, VMware may have made it so some
things work in that environment, but it is not a supported (or tested) environment for Hyper-V.
.:|:.:|:. tim

Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE).

I have a 3 node cluster that has replica setup to replicate to another cluster off-site.
Suddenly one of the servers is not replicating with the error:
Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE). (Virtual Machine ID CC0FD4CC-F9B7-4C68-ABE8-B7D52A87899F)
All other servers are replicating fine so there cannot be a permissions or connectivity issue between the 2 clusters.
This server has 2TB of data so I'd rather not have to start the replication again.
Does anyone have any pointers?
Thanks.

Hi drensta,
Based on my knowledge , "hyper-v replica broker " is needed for failover cluster replica .
Here is a link for "Why is the "Hyper-V Replica Broker" required?"
http://blogs.technet.com/b/virtualization/archive/2012/03/27/why-is-the-quot-hyper-v-replica-broker-quot-required.aspx
Hope this hleps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to Allow microphone and all hardware in Virtual Machine using Hyper-v

I have recently installed Windows 10 preview in Windows 8.1 pro.
How i can allow Microphone and all things in virtual machine from Hyper-v
Thanks
Thank You , Shan Ali Khan

You connect to the VM using the RDP Client - connecting to the IP / name of the VM over the network.
This enabled all device redirection by default.
You can possibly use Enhanced Session Mode as well. That again uses RDP under the hood.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Could not intialitize a virtual machine on Hyper-V Manager on a Windows 8.1 laptop

Hello,
I am receiving the following error when I try to start any virtual machine on Hyper-V Manager on a Windows 8.1 lap"color:black;">An error occurred while attempting to start the selected virtual machine(s):
Morillo-DC could not initialize (Virtual Machine ID …)
On the Event Viewer, I can see:
Event ID 3040
Log Name: Microsoft-Windows-Hyper-V-Worker/Admin
Morillo-DC could not initialize (Virtual Machine ID …)
Thank you in advance for any help.
Regards,
Alberto Morillo

Hello,
Hyper-V was working fine with Windows 8 before installing Windows 8.1 update.
On the Applications and Services Logs (Event Viewer), I found the following event:
Log Name:
Microsoft-Windows-Hyper-V-Worker-Admin
Source:
Microsoft-Windows-Hyper-V-Worker
Date:
12/16/2013 3:59:13 PM
Event ID:
3040
Task Category: None
Level:
Error
Keywords:
User:
NT VIRTUAL MACHINE\E304221F-2B11-4E29-B235-85A3F505EC48
Computer:
MorilloPC
Description:
'borrar' could not initialize. (Virtual machine ID E304221F-2B11-4E29-B235-85A3F505EC48)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-Worker" Guid="{51DDFA29-D5C8-4803-BE4B-2ECB715570FE}" />
<EventID>3040</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-12-16T19:59:13.665065300Z" />
<EventRecordID>114</EventRecordID>
<Correlation />
<Execution ProcessID="6364" ThreadID="3340" />
<Channel>Microsoft-Windows-Hyper-V-Worker-Admin</Channel>
<Computer>MorilloPC</Computer>
<Security UserID="S-1-5-83-1-3808698911-1311320849-2743416242-1223427573" />
</System>
<UserData>
<VmInitialize xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>borrar</VmName>
<VmId>E304221F-2B11-4E29-B235-85A3F505EC48</VmId>
</VmInitialize>
</UserData>
</Event>
Thank you for your help.
Regards,
Alberto Morillo
SQLCoffee.com

Harddisk damage after sleep mode while running 3 virtual machine on Hyper-V

Hi, I have laptop with specification Intel Core i3, 8 Gb ram, 500 Gb 5400 rpm Hdd. I am running 3 virtual machine on that laptop using Hyper-V. Each vm have 1 Gb ram and 1 core processor. I left the laptop for
lunch. After comeback from lunch I see that laptop on sleep mode. I press the power button to turned back on the laptop, after the power is on, the harddisk won't boot and the disk become damage. Is there anyone could explain why that is
happen? Thanks :)

Hi Budi-Kurniawan,
Based on your description, this issue shouldn’t be caused by current configurations on your environment (as
you described: wake up from sleep mode while run 3 virtual machine on Hyper-V). I guess that there are some troubles in this harddisk. As Dave mentioned, please contact with laptop manufacturer and confirm it. I believe we will get a better assistance there.
Best regards,
Justin Gu

Enable Virtual Machine to Access Internet with ICS

In order to experience Hyper-V, you may choose to use Hyper-V on a laptop, and it will likely come with an issue when you create an external virtual switch bounding to a wireless NIC due to
hardware compatibility.
For this reason and requirement, Internet Connection Sharing (ICS) may help us. ICS makes use of network address translation (NAT) mapping individual IP address of local computer (virtual machine)
to unused port number in the TCP/IP stack of ICS host computer. For more information about ICS, please refer to the article here.
Internet Connection Sharing (From Wikipedia)
http://en.wikipedia.org/wiki/Internet_Connection_Sharing
To achieve this in the Hyper-V environment, please follow the steps below:
Demo configurations:
Hyper-V Host: Windows Server 2012 R2
IP address of the Wireless NIC: 192.168.0.100/24
Virtual Machine (Windows Server 2012 R2): 192.168.1.100/24
1. Create the Internal Virtual Switch (Figure 1).
Figure 1: Create the Internal Virtual Switch
2. Connect your virtual machine to the new virtual switch (Figure 2).
Figure 2: Assign the Internal Virtual Switch to the VM
3. Find the wireless NIC with internet access then share it with the Internal Virtual Switch (Figure 3).
Figure 3: Share the wireless NIC
4. Change the IP address of the Virtual Switch and assign the IP address as the Default Gateway for the Virtual Machine (Figure 4).
Figure 4. IP configurations
After that, your virtual machine can have the Internet access (Figure 5).
Figure 5: Access the Internet
Note: ICS provides the DHCP service by default. After sharing wireless NIC, the Virtual Switch will get an IP address automatically (192.168.137.1). If DHCP is enabled in your VM, it will get
an IP address within the same subnet from ICS host computer, also the Gateway and DNS.
Keyword: Hyper-V, Virtual Switch, Wireless NIC, Internet Access
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

While this was a requirement with earlier versions of HYPER-V there is only one scenario where this would be required, and that is when your VMs MUST share the same IP address as the management OS.
That is the only scenario where 'sharing' of a connection would be required.
Since Client Hyper-V has been introduced with Windows 8 / Server 2012, wireless NICs have been supported.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

How to find using SQL query application deployed on win 7 machines with SCCM 2012 server or user installed manually.

Hi,
how to find using SCCM SQL query, application deployed on win 7 machines with SCCM 2012 server or user/technician installed manually. Please let me know.

Thanks, is it not possible via any script also?
Like Torsten said, how can you tell the difference between CM12 installed applications and locally installed? Once you can answer that, then you can write report.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Periodically lose virtual machine (Parallels) internet connection on windows 7

Running OS X Mavericks 10.9.5
Parallels 9.0.24172 running Windows 7 enterprise
Internet connection would periodically time out, and force a reboot of the virtual machine to regain connection.
Using a wired connection.

Changing the network configuration settings for the virtual machine from "Shared connection" to "Ethernet" (for my specific connection) solved this problem. It seems there is an issue with the shared connection feature for Parallels and OS X.
At the Parallels virtual machine selection:
1. Right click on the virtual machine
2. Select Configure
3. Choose the Hardware tab
4. Select Network or Network '#'
5. Change the network Type
6. Choose your preferred type
     Ex. If you are using a WiFi connection select WiFi.
     (You may have to re-enter the SSID and Password to your router/network for the virtual machine).
     In this selection window : Using "Shared connection" is what caused the connectivity problems for my computer.

How to use airport time capsule on a dell portable pc with windows 7 taking in consideration that Time machine doesn't run with Windows ?

how to use airport time capsule on a dell portable pc with windows 7 taking in consideration that time machine doesn't run with Windows ?

TM does not work like that.
If you want files to use later.. do not use TM.
Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
Read some details of how TM works so you understand what it will do.
http://pondini.org/TM/Works.html
Use a clone or different software for a permanent backup.
http://pondini.org/TM/Clones.html
How to use TC
http://pondini.org/TM/Time_Capsule.html
This is helpful.. particularly Q3.
Why you don't want to use TM.
Q20 here. http://pondini.org/TM/FAQ.html

Want to use Premiere Elements 4 or newer with Windows Vista 64 bit??

We bought a new pc with Windows Vista 64 bit - but are now having problems using my Photoshop Elements6 and Premiere Elements 4 with our new pc. it says on the box and on the web - that it is compatible with Vista - so why isn't it working for us? Do i need to buy something else - and if so what?

I am not sure completely about Photoshop Elements - but my main issue is with Premiere Elements....i need to find a program that will work so i can work with all my videos. Trying to find out why it doesn't work or how to get it to work.
Date: Mon, 8 Jun 2009 21:24:11 -0600
From: [email protected]
To: [email protected]
Subject: want to use Premiere Elements 4 or newer with Windows Vista 64 bit??
What problems with PSE?
>

Limitations of hyper-v in windows 8.1 in comparison with windows 2012 R2

Hi frineds
i am looking for a link or document to find out the limitations of hyper-v in windows 8.1 in comparison with windows 2012 R2. but i was unable to find a good link.
may someone please help ?

check out the "Client Hyper-V Survival Guide"
http://technet.microsoft.com/de-de/library/hh857623.aspx
There a few features included in Windows Server Hyper-V that are not included in Client Hyper-V. These include:
Remote FX capability to virtualize GPUs (software GPU in RDP 8)
Live VM migration
Hyper-V Replica
SR-IOV networking
Synthetic fibre channel.
Shared VHDx
Udo
beside the limitations the Hyper-V itself is the same Code
http://www.altaro.com/hyper-v/introduction-client-hyper-v/
Hi
useful. thanks a lot

I have Acrobat pro on an old pc with windows 7, and now want to download it on a new pc with windows 8. i found the serial number, but I don't know how to download it.

I have Acrobat pro on an old pc with windows 7, and now want to download it on a new pc with windows 8. i found the serial number, but I don't know how to download it.

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I want to deployment virtual machine by Hyper-V with windows 2012 server

Similar Messages

Maybe you are looking for