I want to download software for airport time capsule for windows

please informe me how to install time machine application for windows 8.1 OS?

Time Machine is an application that will only run on a Mac.
If you might be asking about AirPort Utility, which is used to setup and configure a Time Capsule, we need to know which version of the Time Capsule that you have.
Please check on the bottom of the Time Capsule to locate the model number.

Similar Messages

I have a rMBP that needs to be backed up. The Wi-Fi in my house is poor and I do not have an Ex. Hard Drive. I want to get the new Airport Time Capsule, but can you accomplish it's benefits wirelessly?

So...
I have a modem across the house and my room is at the opposite side. I believe that you have to connect the Airport Time Capsule via modem cable in order for you to appreciate the benefits of the boosted up Wi-Fi. However, I want the airport time capsule in my room, without having any extra cables plugged into it AND also benefit from the Wifi boosts, as well as back it up wirelessly.
Is there any way to do this? I was reading up on it and there are search queries bringing up "bridges" and all that stuff, but I haven't found a clear answer on it.
So, to recap:
I want the Airport Time Capsule to not only back up my rMPB and help my wifi signal out, but to do all of this with no additional cables having to be plugged in.
Thanks.

Trust me when I say this coming from 20 years of experience.
Get a powered external drive, format it 1 Partition Option: GUID and OS X Extended Journed as the format in Disk Utility.
Download and install Carbon Copy Cloner, clone internal drive to external drive.
Set a schedule to remind you to do it at least once a week, keep it near your charger.
When you plug your charger in, do plug the clone and power the machine up, set the display to sleep only,
CCC will do the rest.
If you want to boot from it, hold the option/alt and select it Startup Manager.
I've seen many TimeMachine and TimeCapsule nightmares and so far haven't seen a problem from anyone using a bootable clone.
It's simple, it's easy, it's more reliable and more powerful than what Apple does and it only takes plugging in a extra cable.
Make as many clones as you want, keep them time seperated, off site etc. etc.
Cables don't have network issues, clones can be verified in seconds merely by booting from them.
Clones protect your productivity, your up in seconds on a clone despite even the hard drive dying.
Software problem? No sweat, boot of the clone and reverse clone your problems away.
If you want to fuss and muss with half implemented TimeMachine and TimeCapsule network headaches then prepare to suffer.
I don't like to suffer, I bought a Mac not to suffer, but it appears you do with TimeMachine and TimeCapsule.
Most commonly used backup methods

Is it possible to change setting on a airport time capsule from windows? open ports etc.

as above, need to know this. If this is not possible i can not buy it because that would mean I lock other users out of being able to configure ports and such.

Thanks for your answer! Then i can only hope they upgrade the aiport utility software on windows so it works on current version. Until then no purchase for me:(

How do i set up my time capsule with windows

How do I set up my airport time capsule using Windows 7 home premium?

If you have the newest AC model TC.. you might be in trouble. Apple specifically state you need v6 airport utility. They do not provide v6 with windows.. only Mac and iOS. If you happen to have iphone, ipad even itouch, you can download and install the airport utility and use that.. you just cannot do the setup from windows.

I purchased a new airport time capsul to use with my older MacBook Mac OSX 10.6.8 and am having trouble downloading the updated software for it .

I purchased a new airport time capsul to use with my older MacBook MAC OSX 10.6.8 Can't seem to download the upgraded software. Can anyone help?

Please review the System Requirements for the Time Capsule.
http://www.apple.com/airport-time-capsule/specs/
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3

Trying to connect Airport time capsule to my leopard iOS mac. Downloaded software for time capsule for snow leapard/leopard but still says I need more software. What do I need?

Trying to connect Airport time capsule to my leopard iOS mac. Downloaded software for time capsule for snow leapard/leopard but still says I need more software. What do I need? I have a 10.5.7 iOS (Leopard). It connects to wifi at speeds in the airport and has plenty of storage capacity and memory.

If your Time Capsule looks like this..
Please review the System Requirements to set up and administer the device.....
Setup and Administration
iPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and Airport Utility 6.3 or higher
http://www.apple.com/airport-time-capsule/specs

Why do I get an error message "can't install software on this version of Mac" for Airport Time Capsule? On Yosemite?

I Bought a new Airport Time Capsule and need to download the Utility software before I can set it up. When trying to install the software, various versions tried, I get a message that it is not compatible with this version of Mac. I run Yosemite on my Macbook. Which version of Time Capsule Utility should I download and install?

You don't need to download and install anything.
You already have the most up to date version of AirPort Utility on your Mac.
Click on the Finder (that smiley face icon on the on at the lower left of the screen)
Open Applications
Open Utilities
Look for AirPort Utility

Will my MacBook Pro '11 support the software needed for my new AirPort Time Capsule?

I've got a MacBook Pro '11, OS X 10.6.8 and am trying to back up my photo library to a new AirPort Time Capsule 2TB.
When trying to set it up in AirPort Utility, I am getting the warning "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility."
1. Where do I go to get the latest version of AirPort Utility?
2. Will the latest version work with OS X 10.6.8?
Thanks for any help you can offer.

Yes. The latest version will be installed when you upgrade to Yosemite.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite - System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

Using Airport Time Capsule as target/workplace for a Data Rescue III type software

I need to recover data from a 'bad' disk on a Macbook anno 2007. My idea is to mount the drive on a Macbook Air using target disk mode and a thunderbolt/Firewire connection. The mounting goes fine but copying the data leads to a hanging Mac Air. So now I put all hope on a Data Rescue type software in that such software will circumvent the hanging issue! Problem is that the Mac Air don't have enough memory to store the hopefully recovered data. Essentially, I have no proper 'target disk' for the recovered data and need to buy one (as well as buying the rescue/recovery software).
So, can I use a Airport Time Capsule as target/workplace for a Data Rescue type software on my Mac Air? Is this a proper mountable hard drive?
Thanks,
RA

No, it is better to get a USB drive. You can mount a TC drive but it is just as likely to unmount itself half way through.. keep networks out of the already many problems you have.

I have 2 macs and 2 PC laptops in my home wireless network. Can I use the Airport/Time Capsule hard drive to back up all 4 machines? I know that I will have to use different back up software on the PCs, but is it possible over the wireless network?

I have 2 macs and 2 PC (Windows 7) laptops in my home wireless network. (The iMac is hardwired via ethernet to the Airport/Time Capsule; the others are wireless connections using Airport). I want to use the hard disk drive in the Time Capsule as a network backup drive for all 4 computers. Is this possible? Could someone help me by telling me how to configure it? I know I will have to use different backup software in the 2 Windows 7 Laptops? Do I need to use the Windows backup software, or can I use a third party program like Acronis True Image? Thanks in advance for the help

It is your fault, pondini.. all your fault.
I read of all the things that go wrong restoring Time Machine backups.. particularly stupid things like mail, photo libraries don't go back.. etc. And looking through the incredible number of issues people have here, when their Mac finally takes a dive how hard it is to restore.
I restored a test hard disk from a TC.. and it takes ages and ages to even make up its mind to start.
I worked in computer support for ages, but not Macs.. so my experience is ghost.. ghost images.. on large commercial server setups, can stream restore to multiple computers at once.. even doing it computer by computer the image is simple as network boot to restore. But ghost went the way of Symantec.. sigh!! And was destroyed.
A product like clonezilla, Free linux boot cd.
http://lifehacker.com/5078397/clonezilla-backs-up-and-restores-your-disks
Can backup a Hard disk in just about any format.. yet to try it on a Mac to a TC.. but I will. Boot from CD.. instead of your lost Lion partition which no longer exists (because the hard drive had to be replaced) and the DVD they no longer give you, and restore the entire hard disk in a couple of hours .. to the exact image at the point you made the clone.. in any format, with any partitions.
My bet is that it will kill TM .. but you could be right.
It is just the prospect of all those permission changes, photos and mail libraries etc that worry me.

Airport time capsule, add Airport extreme for stronger signal

I have a new Airport Time Capsule set up and running. My old Airport Extreme (5th gen) is sitting unused. I'd like to hook it up because I can't get a USB drive to work off of the TC (according to posts here it requires a powered hub).
I've read posts about setting up more than one Extreme, but feeling overwhelmed by all the terms. Also, much of the advice, including articles here, pre-dates the TC. From what I've read, the version of Airport Utility makes a difference too. I have the latest, 6.3.1.
First question: Can somebody explain, or point me to current articles, the differences between hardwiring (ethernet) the old AE to 1) the TC or 2) my wired Internet router (Verizon). A third option is, I think, is to set up the old AE stand-alone, connecting via wifi only, in a different part of the house.
Here's what I'm trying to accomplish. I live in a big old house with internal brick walls. I want to strengthen the signal throughout the house. One network, one password, security not a huge problem because we're rural.
I'm all Apple (Windows is banned from my house), and all software and OS up to date (10.8.4; I forget what cat it is).
Second question: depending on the answer to the first, am I looking to do an extended network, bridge network, hidden network (what is that?), roaming? I see these terms but am unclear on the distinctions. I'm sure many lurkers will have the same question.
Thanks,
Steve

Hi Again.. !!
There are two basic methods of connection.. wired by ethernet.. much the superior method to be used in every case possible.. (less gremlins!!). Even homeplug (EOP we call them here).. adapters are a better alternative to..
Extend wireless. This is apple terminology for what everyone else calls wireless repeater.
Wireless repeater as the name suggests.. picks up the wireless signal from a wireless source and retransmits it.. in the process it slows all transfers by half.. or more.. so it is inefficient.. only use where wire cannot be run.
Now to your specific question.
First question: Can somebody explain, or point me to current articles, the differences between hardwiring (ethernet) the old AE to 1) the TC or 2) my wired Internet router (Verizon). A third option is, I think, is to set up the old AE stand-alone, connecting via wifi only, in a different part of the house.
If the verizon router is the main router of the network.. with the TC plugged in and working in bridge mode.. then you can plug the old AE into TC or verizon router.. it will make no difference. The TC is working as a switch and AP only.. so plug into one or the other both are handled by the verizon router which does not know or care where the devices are plugged in. There is one consideration.. the TC and AE are gigabit.. the verizon is likely to be 100mbit.. so if you can plugging into the TC will provide gigabit link. Only relevant to ethernet connected computer on the AE and TC talking to each other.
AE stand alone is useless to you.. in stand alone you connect to it but have no connection to the rest of your network or the internet.
Second question: depending on the answer to the first, am I looking to do an extended network, bridge network, hidden network (what is that?), roaming? I see these terms but am unclear on the distinctions. I'm sure many lurkers will have the same question.
If you connect by ethernet you set up roaming.
See http://support.apple.com/kb/HT4260
If by extend wireless you simply set the extend.. it is by its very nature nothing but a repeater so must use the same wireless name and password etc.

I purchased a 3TB Airport Time Capsule After 8 hours been able to configure the box using Ethernet connection but now I want to move my current backups and it wants authentication but no box is available to provide my administrator name can anyone help ?

I purchased a 3TB Airport Time Capsule to use with my Mac running latest Maverics. After 8 hours been able to configure the box using Ethernet connection but now I want to move my current backups from my small driveand it wants authentication but no box is available to provide my administrator name can anyone help ?

I overcame the permissions by allowing both paths to have read and write access to anyone but that didnt solve it until I copied it into the DATA directory which I created on the Airport Time Capsule.
I had already discovered the TIME MACHINE How to transfer backups but I am struggling still with the item and cannot currently get it to work. My setup seems to have created a wireless link to my router which is what I wanted and in that set up there are three options. I have simply gone for the extension of my network. I ignored the other option there which I cannot remember something like DNS? That may be the problem becasuse when I remove the Ethernet connector it just doesnt go anywhere.
I have also found I cannot update my TIME MACHINE software (currently 1.3) as although Apple tell me I should be able to set backups hourly daily or weekly I have only ever been able to run it hourly when i would prefer longer intervals so thought an update might be necssary.
Also tried to get an update for my Airport Utility (Currently 6.3.2 but cannot find one even though I have read there might be one available and again this might be the problem.
Have reset the Time Capsule now about a dozen times.
Following the instructions and trying to copy my existing backup it suggests you need to copy it to the root directory but that is when I get some sort of security issue and I found I could only get it to accept if I dragged my .backupdb to the DATA directory on the Time Capsule. I dont even know if I do this it will work when I come to use it.
I therefore found your reply of no more help than i had discovered but I hope you return to read this note because I really do need some help.
I am intending starting again in the next couple of days and fully documenting what I do and what I see and then as I suspect it will be no different and I will then seek an appointment at the Apple Store in Trafford Centre and if that proves unsuccessful then I still have time to return and become a dissatisfied customer with Apple for the first time in a long experience with Apple. I have noticed frightening notes on the conversations which point to problems of Mavericks working with Airport Time Machine!! So in the end it might not be me doing anything wrong. Unfortunately you do feel left out in the dark sometimes that is why I hope you can respond with a solution?

I have just got an Airport time Capsule for back up how do I do it? Do I put the ethernet cable into the back of my sky hub because when I do that the amber light on my Time Capsule flashes amber. Please talk in simple terms as I am a

I have just got an Apple Airport time capsule to back up my one year old iMac......how do I do it? I have tried putting an ethernet cable into the time capsule and to my sky hub, all I get is a flashing amber light, can anyone help I am a silver surfer not used to Apple products, but love them, plus I don't understand half of the jargon....HELP please

Apple's Setup Guide for the Time Capsule is pretty simple and clear for most users, and you don't indicate at what point or step that you are getting stuck.
So, please go to page 8 in your Setup Guide to review the topic of Plugging In Your AirPort Time Capsule.
The Sky hub will likely have 4 Ethernet <--> ports on the back of the device. Pick any one that you want and connect one end of the Ethernet cable to the port that you choose.
Then, connect the other end of the Ethernet cable to the WAN (circle of dots) port as shown in the Setup Guide.
Continuing with the instructions on page 8 of the Setup Guide, power up the Time Capsule by connecting the power cord from the back of the Time Capsule to a wall AC jack.
Note that the instructions indicate that the indicator light will be solid amber during startup, and it will change to blinking amber during the setup. The light will remain blinking amber until you have configured the Time Capsule at which time the light will turn green.
Next, go to page 12 of the Setup Guide to see the information to Use your Mac or iOS device to set up your AirPort Time Capsule.
You indicated in your tag line that you were using OS X Mountain Lion (10.8.3), and since that will exceed the minimum requirement of a Mac using OS X (10.7.5) as noted in the guide, you can use your Mac to set up the Time Capsule.
Continuing with the instructions on page 12 of the Setup Guide......
1. Open AirPort Utility on your Mac. It is located as follows: Finder (the smiley face on the dock) > Applications > Utilities > AirPort Utility
2. Select your AirPort Time Capsule and click Continue. You won't be able to do this, but read further......If you do not see the AirPort Time Capsule that you want to configure, choose it from the WiFi status menu in the menu bar, at the top of the screen.
So, clicking on the WiFi icon will yield a small window that looks like this:
The example below shows an AirPort Extreme. You will see Time Capsule on your screen. Click on Time Capsule.
When you click on Time Capsule, that will get the setup wizard going. it will take a minute to analyze the network, then display a screen that looks similar to the illustration below, except that you will see a picture of a Time Capsule on your screen
3. Continuing with the Setup Guide.......Follow the onscreen prompts to create a new network
Network Name...........Type in a simple name that you want to call your network. Do not use the suggested name.
Base Station Name....Type in a simple name that you want to call the Time Capsule. Mine is TC, for example.
Password...................Type in a password that will be used for both the network and the Time Capsule. Write that down.
Verify..........................Type in the password again to Verify
Click Next
The setup wizard will configure everything for you. When you see the message of Setup Complete, click Done.
The Time Capsule is now set up and it will display a green light.

My airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

my airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

What model is your TC? What is the firmware?
I recommend you do a factory reset and use short names.. not apple recommended names.
Short.. 2-20 characters .. less than 10 even better.
No spaces.
Pure alphanumeric.
Set fixed channels for 2.4ghz wireless.. test with 11, 6, 1 at least.
That often helps.. if not and is old, ie Gen1-4 go back to 7.6.1 firmware which is far more solid.

I want to use my airport time capsule as a network attached storage solution, is this possible or do I need to connect a separate hard drive?

I want to use my airport time capsule as a network attached storage solution, is this possible or do I need to connect it to a separate hard drive?

The Time Capsule is by default a network hard drive, but it has no "brains" of it's own. So, it cannot function as a stand alone media server if that is what you are asking.
If you are also using the Time Capsule hard drive for Time Machine backups of your Mac(s), then there may be struggle for available space on the drive since it is not possible to partition the Time Capsule drive in a traditional manner.
If space is getting tight on the Time Capsule, it might be a good idea to connect a drive to the USB port on the Time Capsule and use that drive for your network storage needs.

I want to download software for airport time capsule for windows

Similar Messages

Maybe you are looking for