I want to dump iPhoto pix to an SD card for a photo frame. In the event of duplicate numbers, I renumber in the Info window yet when the photo is dragged to the card, FINDER declares there is a duplicate. Why?
I want to dump iPhoto pix to an SD card for a photo frame. In the event of duplicate numbers, I renumber in the Info window yet when the photo is dragged to the card, FINDER declares there is a duplicate. How can I change the photo number where FINDER allows doesn't see a duplicate?
Because adding a Title in iPhoto is not the same as renaming a file, plus, using drag and drop means you have no opportunity to rename the file.
However, if you use File -> Export you'll see the Filename options in the Export window - one of them is to use the Title as Filename.
Regards
TD
Similar Messages
-
Okay, that was a long title. Sorry about that.
Longer version now. The font Janson Text is an old Type 1 Postscript font. If I make a new document in InDesign CC2014, this font is completely available to me. HOWEVER, if I open a legacy file that uses this same font, it shows up with the usual pink highlighting.
I know the font is available to InDesign, because I made a new test document and set type with it.
If I try using the Type > Find Font.. option to replace the 'missing' typefaces, InDesign won't let me, not recognizing the font that I just used in the new test document.
I just tried exporting the defective file as an IDML file, then opening the IDML file. The font is now working properly.
This is a real problem, as the file I'm trying to open is a book that we need to reprint. I now have to go through it page by page to see if any linebreaks have changed.
WHAT CAUSES THIS, please?There is one way its getting fixed. Once I update my Adobe Illustrator CC to Adobe Illustrator CC 2014 it is further allowing me to go into the system folder and allocate the font to the file so that it can replace it. My only concern now is that our MAC partners who will receive these files back from us have Adobe CS6. We will down save it to CS6 but I hope they won't experience any font issues because of us using CC 2014? Any light you can shed on this?
-
I need to save some pictures from iPhoto to a SDHC photo card for a digital frame and was wondering if there is a way to shrink or compress file size for each picture as I have already cropped the pictures? Thank you
Yes, you do this when you export the images from the Library.
File -> Export
in the Size section, you don't need images larger than the frame size, so you can specify that and in the Jpeg Quality you can select the amount of compression used.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue. -
How to manually sync podcasts or music to an iPod using the newest version of iTunes? Please advise. Apple's i nstructions still say to drag to the iPod icon under "devices" on the left, but that's no longer there. The iPod word appears in the upper right but won't let me drag to it.
Click View>Show sidebar
-
When I attempt to drag doc to trash "Finder wants to make changes" "Type your password to allow this" When I do this the doc is immediately deleted. How do I turn this off?
Please take these steps if you're prompted for a password when moving items in your home folder to the Trash.
1. Triple-click anywhere in the line below on this page to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above. -
Recently Apple replaced the hard drive on Mac running Yosmite 10.10.2 and now when i try to rn FaceTime, the computer says "no camera available". Does anyone no how to fix this?
Assuming there is no hardware problem try reinstalling Yosemite. If this does not work then take it back to the Apple Store.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
The message"itunes has detected a iphone in recovery mode. You must restore the iphone before it caan be used on itunes." yet when i do i still get the same message!!!
You have to restore the iPod, no ifs, ands, or buts...
After iOS is installed you will be asked if you what to set it up as a new iPod or if you want to restore from a backup.
If you have a good backup you can restore that and you're good to go.
If you don't have a good backup, then you end up with a "clean" iPod.... -
My iTunes isn't reading my IPhone 5 and I have the newest iTunes update 11.0.3 I use a windows computer, when I plug my iPhone to another windows laptop it reads it, except mine
Take a look at this link, http://support.apple.com/kb/TS1538
-
Why dont you take ios 7 and take out a feature so the ipod 4 can have enough space to take it I suggest when you touch your screen and the keyboard appears and make the old way.
We're all users like yourself, if you would like to leave feedback to Apple go to Contact Us at the bottom of this page then go to Feedback and leave your concern. iOS 7 requires 512MB of RAM. Only the iPod 5 has 512MB RAM. The iPod 4 only has 256MB RAM. Hope this helps, Good luck.
-
After installing Windows 8, when I try to use itunes, the cursor only slowly scrolls to the top of the page and the program will not respond.
After installing Windows 8, when I try to use itunes, the cursor only slowly scrolls to the top of the page and the program will not respond.
-
My brand new Ipad 2 is not charging the battery with py PC thru USB. Is that normal? When I plug it directly into the wall, it works... Thanks! Sam
It talks extensively about charging in the user guide, and how USB ports on PCs and older Macs may not provide sufficient power to charge the iPad. The user guide is available for free from the iBook store (accessed directly via the iPad iBooks app).
My iPad charges fine when plugged in to the back of my iMac, but I would always prefer to use the mains adaptor to save the strain on my USB circuits (which can wear out if used heavily to power external devices). -
how do i sort out error r6034 on my windows vista when i try to start itunes ???
the message box is from microsoft visual c++runtime library, it says an application has made an attempt to load the C runtime library incorrectly, P;ease contact the application's support team for more information.Hey deepakmenonfrompune,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M. -
I am trying to work with a series of vi's developed in Labview 8 in Labview 7.1. The code was saved with the 'Save for Previous Version' option available in Labview 8. When trying to use the code in LV7.1 my entire Windows XP system locks up (cursor freezes). Are there any ideas what's going on and how to fix this?
Thanks for your help!
MikeI have seen some problems with the save for previous option in the past. Instead of saving the entire hierarchy, try seperating the code into several different pieces and saving each piece individually. Then, see if you can open the different pieces in 7.1.
If that doesn't help, you should post some more details, like when exactly does it lock up, does it have things like DLL calls, and maybe attach the code.
Try to take over the world! -
I drag a video clip from Event to Project into my imovie I've started. The video clip length changes from 7.9 seconds to 4.9 seconds. How can I stop that length from being changed?
If you are using transitions either side of the clip they will use some of the clip to generate the effect, there isn't anything you can do unless you remove or shorten the transition.
If you aren't using transitions it may be that you are only selecting part of the clip in the event window, try dragging out the yellow frame to include all the video you want in the project. -
Hi Folks,
We have an annoying behaviour in Mail 6.6 on one work station. When any message is dragged to a folder such as the one for Attended To mail, other messages in the InBox vanish, but reappear when Mail is Quit then reopened.
Other workstations do not exhibit this behaviour. We cannot find any setting whichmight have become corrupted.
Should we merely delete the Preference file?
Thanks in Advance,
JohnA possible fix is to select the Attend To folder in mail then on the menu bar Select Mailbox > Rebuild. Then if that does not solve the problem rather than deleting the preference file...
Quit Mail
Drag the preference file to the desktop
restart Mail
If the problem persists quit mail and restore the preference file to ~/Library/Preferences and you will not have to recreate the preferences from scratch.
Maybe you are looking for
-
Adding fields/text on standard SAP transaction screens
Hi, How do we add the fields on standard SAP transaction screens? For example, if I have to add field on transaction FB01 screen or change text of existing fields, how does it works? Please let me know. Thanks , Yogita
-
CMD+Tab Issues In Mountain Lion (consolidated)
I've seen CMD+Tab Mountain Lion issues myself and some others have posted online, so I'm consolidating them here: CMD+Tab fails to show all running apps that are running (includes native OS apps such as iPhoto, Mail, etc.) Pressing CMD+Tab does nothi
-
I'm not sure how this happened but it did. I have thousands of photos in iPhoto that are duplicates of other photos. Is there a way to have iPhoto scan through the photo library and delete all of the extra copies of photos? thanks, - Ernest
-
Windows 7 multi touch support stops
I just recently Installed windows 7 x64 on my Macbook pro and the drivers off the snow leopard disk the Multi touch works perfectlyfor a while then it completely stops working until I reboot.
-
Is there a way to filter on more than one column in step 3 of the report builder? For instance, I have a report that displays activities from Accounts and opportunities. I would like the ability to filter a report by The Account Owner column and the