I want to edit my ibook

i want to edit my audio book so that i can listen to my favorite parts. i can't import the book into a third party software where i can edit it because it's locked. the whole mp3 is two hours long, so i can't copy it 10 times and specify the starting and stopping points because that would take up too much room.

i've imported it into imovies, we'll see if that works

Similar Messages

HT5071 I almost finished my iBook and layed out almost 100 pages. Now I wanted to edit chapters and Sections by moving them into certain areas of the 100 pages. It will not work, adn I have no clue where to go from there. Any advise?

I almost finished 100 pages on the iBook Author. Unfortunately, I just created one page after the other (with lots of graphics and pictures). Having done that, I wanted to edit the iBook by placing Chapters and Sections between these pages.
I used iBook Author Help and Publishing with iBook Author for advise, but I am unable to move Chapters and Sections between the already finished pages. I get the strange feeling I did the whole thing wrong and wasted many hours for nothing. Anyone out there who struggled with the same problem? I self published a book already and wanted to use iBook Author to update and upgrade my existing book. Any advise is very much appreciated, thank you. Wolf

You may also try starting a "fresh" copy from scratch and copying and pasting into it with the order you want. I have succeeded in this a few times.
Hope this helps...

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please help

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

I want to editable description field in my web dynpro application

Hi expert,
The requirement is to make the Description field editable. However, the container for the dynpro only appears to allow for a certain type of action and is essentially used to display the Line Item details, giving no option to change the Line Item Description.
so i want to editable in this description field in my web dynpro application /SAPSRM/WDC_DOTC_PC_I_BD .
Kindly give me soulation ASAP.
Thanks and Regard's.
Vikash

Thanks for the reply.
The name of the view is V_PC_DOTC_ITM on which we have the records. On each line item there is a description field which is of type (LinkToAction). I want to enable user so that it can change the Description text (I will handle the action). Also, if you have any idea about updating the database table from here as it needs to be updated in BBP_PCPOS table.
-vikash

Hi please can you help me. I have photoshop CS5 extended, I bought a new camera Nikon D610 I want to edit my photos adobe camera raw , but when I try to open photoshop CS5 it will not open. Please can you tell me how to download and install the camera raw

HI bought a new camera Nikon D610 , I am using adobe photoshop CS5 extended, I want to edit my photos in camera raw but it is not possible to do so . I need to download camera raw plugin for CS5 can some tell me how to do so or if there is a link for the camera plugin.
Many thanks Pitt.

For that Nikon model you need ACR 8.3 that means CS6 or CC. Or you can download the DNG converter convert your Nikon RAW files to Adobe RAW files. And then process the Adobe RAW files with CS5 ACR version 6.7
Camera Raw plug-in | Supported cameras

I have a band video that I want to edit. In iMove 09, I could clip to crop or add a transition or both without altering the audio. In iMovie 11, the audio lower or drops out when I clip for and use a transtion. Is there a setting to preven this?

I have a band video that I want to edit. In iMove 09, I could clip to crop or add a transition or both without altering the audio. In iMovie 11, the audio lower or drops out when I clip for and use a transtion. Is there a setting to preven this?

Thanks for that info! Even in my time answering questions on iMovie Discussion Group, I never had a good understanding of when and how Optimize Movie came into play. I always would import as Optimized and Large Size and figured that was good enough. But knowing you got much, much more flexibility doing it the way you describe gives me a much better understanding of the different routes you can take into the Event Library.

Calendar - when I want to edit a monthly recurring event but only for one month I am no longer given the box to update only that date.

Calenndar - when I want to edit a monthly recurring event but only for one month I am no longer given the box to update only that date month. How do I do this with the new operating system?

Adding to Alan's answer:
One of the problems that comes with these tricks for variable-rate acquisition is being able to match up sample data with the time that it was sampled.
If you weren't using either of E-series board's counters, there is a nifty solution to this! You'll be using 1 of the counters to generate the variable-rate sampling clock. You can then use the 2nd counter to perform a buffered period measurement on the output of the 1st counter. This gives you a hw-timed measurement of every sampling interval. You would need to keep track of a cumulative sum of these periods to generate a hw-accurate timestamp value for each sample.
Note: the very first buffered period measurement is the time from starting the 2nd counter until the first active edge from the 1st. For your app, you should ignore it.
-Kevin P.

Have been using Foxfire for AMcG website. Now want to edit MME website. Can't figure out how to bring up second website. Whatever I do, it keeps taking me ba

Have been using Foxfire for AMcG website. Now want to edit MME website. Can't figure out how to bring up second website. Whatever I do, it keeps taking me back to the original AMcG site.
Because I'm unable to figure out where to find the answer to this question on this website, would you mind emailing it to <sub>removed by a moderator -j99</sub>. Much obliged, for I'm working on a tight deadline and have no one else to turn to, being it's Sunday.
Please note this is a publicly available and web search indexed forum that the message appears on https://support.mozilla.org/en-US/questions/950640 you probably do not wish your email address to appear. Note it is possible to use the private messaging ssytem without disclosing your email address
[https://support.mozilla.org/en-US/messages/new?to=John99 me] [https://support.mozilla.org/en-US/messages/new?to=annmcgill you]

Sorry I not sure I understand what you are trying to do and what the problem is, are you able to give more details please.
Are you trying to upload to a site you own ?

//remove this line if you want to edit the code by hand? um which line?

Several of my pages are locking up and I don't know why. As I work through the code, I remembered that I altered some text in a SendEmail by directly altering the page rather than using the Server Behavior. Don't understand why that would matter but whatever...
Now as I ponder if that is causing the problem, I ran across this commented line in the code:
//remove this line if you want to edit the code by hand
But are they talking about the line just after that line of //remove or do they mean the actual comment line of
//remove this line if you want to edit the code by hand?
Thanks for your help

Trigger and $tNG look suspiciously like ADDT code to me. Ask the guys in the ADDT forum (http://forums.adobe.com/community/dreamweaver/addt). There are a couple of them in there who know the code intimately. I haven't touched ADDT for ages.

I had to erase my hard drive and then reinstall everything back from my passport external hard drive. Now my iPhoto edit is not working. I get a blank screen when I want to edit. The photos show up in the library but I cannot edit them. Help?

I had to erase my hard drive and then reinstall everything back from my passport external hard drive. Now my iPhoto edit is not working. I get a blank screen when I want to edit. The photos show up in the library but I cannot edit them. Help?

There are several possible causes for the Black Screen issue
*1. Permissions in the Library* : Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
*2. Minor Database corruption*: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
*3. A Damaged Photo*: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
*4. A corrupted iPhoto Cache*: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
*5. A corrupted preference file*: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Regards
TD

I want to edit Pictures that are on my External Hard Drive Using iPhoto without having to import them every time, it was suggested to me to use Aperture. any advise is appreciated

I want to edit Pictures that are on my External Hard Drive Using iPhoto without having to import them every time, it was suggested to me to use Aperture. any advise is appreciated

Aperture is a nice program, I use it myself for it's adjustment and light editing capabiities.
You can save a vault on another drive.

I have a lot of HD video on my hard drive that I eventually want to edit in iMovie, but just don't have the time now. It is clogging up the computer, though. How do I take the Hd clips off Mac for later editing?

I have a lot of HD video on my hard drive that I eventually want to edit in iMovie, but just don't have the time now. It is clogging up the computer, though. How do I take the Hd clips off Mac for later editing?

See "Storage drive" here
Most commonly used backup methods
Th problem with HD video is it needs a fast external interface, so you should pick a external drive that uses the fastest interface your computer has to offer.
Performance rank fastest to slowest is
Thunderbolt, USB3, (newer Mac's)
Firewire 800, USB 2, Firewire 400, USB 1 (older Mac's)
Newer Windows PC's have USB3, older one's USB 2,1.
You need to format the drive if it comes FAT which a lot do, as FAT has a 4GB file size limit, so this won't work with large HD video files.
So if your going to use the drive only with a Mac, then head to Utlities > Disk Utility and format it Options: GUID Format: OS X Extended Journaled. (select the drive makers name and click Partition tab)
If your going to use the external drive with a PC, take it to the oldest PC you have and right click and format exFAT.
If you have a Windows XP machine and there is no exFAT, it can be downloaded for free from Microsoft.
Drives, partitions, formatting w/Mac's + PC's

I got iPhoto '11, version 9.2.3 and want to edit photos using Photoshop elements 10. I have put P'shop 10 as the preferred editor... but when I click on the photo in iPhoto the Adobe p'shop 10 program opens BUT the picture does not open for editing. Wha.

I got iPhoto '11, version 9.2.3 and want to edit photos using Photoshop elements 10. I have put P'shop 10 as the preferred editor... but when I click on the photo in iPhoto the Adobe p'shop 10 program opens BUT the picture does not open for editing. What the heck... I did fine with the old iPhoto and "Shop elements 6... .

Adobe now hides the editor - what looks like it is not - you want the editor hidden in the support folder - see http://forums.adobe.com/message/3955558#3955558 for details
LN

NON-Flash User Wants to Edit and "Recompile" an SWF or FLA file...help??

Hello!! Although I am NOT new to Mac, I have NEVER attempted to edit an SWF file and I'm seeking an EASY way to do so. I think I might be CLOSE but I'm wasting time trying to figure it out so I'm posting here for some help...hopefully!! :-))
I also apologize because I did NOT know where to post this question so KINDLY direct me if I have posted in the wrong place!
Soooo, I have an complete, original .swf flash movie. It is a Holiday greeting but the VERY LAST frame has text that is NOT RELEVANT and I wish to change that text.
It appears that the text I want to change is (I do NOT know the correct term) a "layer" of graphic content for the last frame.
So, I have done TWO THINGS: I have used the Flash Decompiler app to (1) create an .fla file and (2) DECOMPILED the entire .swf extracting ALL the resources/objects that are used to create the original .swf animation. I have NO IDEA what to do with the .fla file...I know it is used to edit the animation but I do not have software to manipulate the file.
BUT, in the decompiled files, I HAVE LOCATED the one resource...a TEXT RESOURCE...that I wish to change. This extracted text resource is named "Dynamic text 293.swf", saved as in .swf format.
Now HERE is where I am STUCK!!...and I THINK this is the direction I would like to go:
1. Open the Dynamic text 293.swf file in a format that allows me to EDIT THE TEXT I wish to change. HOW DO I DO THAT?? Can I convert it to a jpeg, edit the text, and then BACK to an .swf file?? Can I simply CREATE a JPEG and somehow SAVE IT as an .swf file to REPLACE the Dynamic text 293.swf file? Is there an EASIER/DIFFERENT way to edit the text in this Dynamic text 293.swf file?
2. After editing the text in the Dynamic text 293.swf file, HOW DO I "RECOMPILE" the folder of alllll the extracted resources from the original .swf animation, NOW with this NEW/EDITED Dynamic text 293.swf file, and RECREATE the full .swf with the changes I made??
Again, I do NOT have FLASH or MACROMEDIA or any of those apps :-/ I DO have the .fla file conversion AND have isolated the SINGLE extracted resource file (Dynamic text 293.swf) that I want to edit.
THANK YOU TO EVERYONE FOR YOUR HELP Greatly appreciated!!
Scott

That's a problem, since the format changes between jpg and swf when converted
probably won't just go back to their previous state, less the changed section.
The converter you have, is it a freeware to convert swf to fla; or what does it say
that it can do? In some cases, a flash video can be copied (perhaps illegally)
through use of a software such as Ambrosia's SnapZ ProX and a movie of any-
thing playing on your Mac can be copied. So, a movie could be paused at the
end where the unwanted content exists, so the copy would not have it recorded.
Snapz ProX - Ambrosia Software: (not freeware, has 'free trial' version)
http://www.ambrosiasw.com/utilities/snapzprox/
Otherwise, there are a few shareware and freeware editors for swf content; to
some degree or another they either convert content or allow some editing.
And this may only work as far as the item's creator allowed, if the file is locked.
' swf fla freeware editor Mac OS X ' - google search:
http://www.google.com/search?hl=en&q=swffla+freeware+editor+Mac+OS+X&btnG=GoogleSearch&aq=f&oq=
I'd tried some basic editing of swf files a few years ago, and was able to only
convert the string of images into single-frame jpgs and work on each one,
but could not get them back into an swf. Perhaps graphic converter or other
software could do something for these; but I am inexperienced in all that.
Good luck & happy computing!

Photoshop and elements 13 Working in iPhoto Want to edit image using photoshop elements Did the following IPhoto Preferences Advanced Edit Photos: In drop down menu chose in Photoshop Elements Also control click and chose edit in external editor Drop

Photoshop and elements 13
Working in iPhoto
Want to edit image using photoshop elements
Did the following
IPhoto>Preferences>Advanced>Edit Photos: In drop down menu chose in Photoshop Elements
Also control click and chose edit in external editor
Drop down menu edit photos in external program>photoshop Elements
Go to to the image I'm working on --- selected the image, the clicked on edit. When nothing happened I double clicked the image. Still elements didn't open. Then I opened the Elements editor, went back to iphoto and tried the entire process again. the photo still didn't open on Elements 13 for editing.
I have 3 Elements 13 books as well as looked on line--all my references say the exact same thing ---- iPhoto>Preferences>advanced>edit in external program>photoshop Elements
I uninstalled and reinstalled both iPhoto as well as Elements.
I spoke with application technical support. There appears to be nothing wrong with my copy of iPhoto. However there is no support from Adobe. I waited for over 1.5 hours for chat support several days ago, and finally gave up.

You are probably choosing the obvious file rather than the correct file as the PSE editor. The actual editor is hidden away inside the Support Files folder. The PSE file at the top level of the PSE folder in Applications is just an alias for the welcome screen and what you're describing is exactly what happens when you choose that. You want this one:

I want to edit my ibook

Similar Messages

Maybe you are looking for