I want to enter the password for a secure WIFI network on several iphones.  If I do this, can the end users somehow extract the ip address and password for the wifi network from the iphone and use it from a pc (at home, for example)?

I want to enter the password for a secured wifi network on several iphones.  If I do this, is it possible for the end users to somehow extract the ip address and password information and use it from a pc/laptop/other mobile device.  For security reasons, I don't want them to be able to to this.
Please advise,
Thanks.

If you look at the top left of your screen you will either see a 3G (or 4G if you have AT&T) or you will see the wi-fi symbol.  If you don't see the wi-fi symbol you are connecting to Gmail through your cellular data plan, not via wi-fi.
To answer your question, it doesn't happen often but when it does the steps I mentioned above will normally resolve it.  Hopefully you won't have any further problem with this.

Similar Messages

  • First I got a wrong password for the network and the application error after a while that I wanted to enter the correct password no longer have access to network settings

    First I got a wrong password for the network and the application error after a while that I wanted to enter the correct password no longerhave access to network settings

    Unfortunately, it says I can't delete anything without the missing password.

  • How can i cancel my other nickname from gamecenter, i want to all the devices to use same nickname.

    i registered my user name before in gamecenter, but my daughter made the other nickname in the game center later that affect my other ipad and iphone to sharing the same application. i want to all the devices to use same username, can you tell me how to cancel my daughter's nickname on her ipad.

    You are using icloud?
    maybe your account is not whit icloud and thats the problem
    o you dont have the same account in your iphone and ipad

  • TS1398 In "Set Up" I try to select our secured WIFi router from the list of available networks.  However, it will not allow me to select it. This then prevents me from going to the next step. What do I do?

    In "Set Up" I have tried to select our secured WiFi router from the available list shown.  It is listed.  However, when I try to select it, it will not check off or remain blue when I lift my touch.  This then will not allow me to go on to the next step.  What do I do to connect to a secure WiFi router? I do know the WEP Key number but there is no place to type then in.
    Alice from Hart

    The trial can only be loaded 1 time as far as I know. You could try http://labs.adobe.com/downloads/acrobatcleaner.html, remove any left over parts of the Acrobat folder, and reboot. Then try an install again, but my guess is you will have to purchase Acrobat at this point.

  • How to return a profile in Game Center. where you want to enter the old nikneim?

    How to return a profile in Game Center. where you want to enter the old nikneim?

    It's not actually round.  It is slight flattened vertically.
    Anyway...
    I have an Action that places guides at 50% (50pc) vertically and horizontally to give me the exact center of an image file, or you place them manually with View > New Guide.
    After doing that I would place the circular select from that center point using Shift and Alt (Opt) and get it more or less where I wanted it.  Then change the selection into a work path.
    You can use Free Transform to reshape and position that work path by selecting it in the Paths panel.
    Then place your text, and if you still need to fine tune, use Free Transform again, but on the Type layer.
    You could also use Free Transform to reshape the BG graphic to make it round.

  • I want to update the Custom table using the data available in ITAB.

    Hi,
    I want to updaste the Custom Table which is created by me (Ztable) using the data available in itab.(which i got from defferent standard tables)
    I want to update the custom table using the itab data How is it possible?
    Is any possible by using Modify ?
    DPK.

    example here
    modifying datbase table useing internal table
    advises before updating this datbase table plz lock that table to avoid incosistency
    write the logic for modifying
    Modify the database table as per new dunning procedure
    MODIFY fkkvkp FROM TABLE lt_fkkvkp .
    and finally unlock the table
    example
    *To lock table for further operations
    constants: lc_tabname TYPE rstable-tabname VALUE 'FKKVKP' . "FKKVKP
    CALL FUNCTION 'ENQUEUE_E_TABLE'
    EXPORTING
    tabname = lc_tabname
    EXCEPTIONS
    foreign_lock = 1
    system_failure = 2
    OTHERS = 3.
    IF sy-subrc EQ 0.
    To fetch all the contract accounts for customers of the segment
    Households/SME.
    PERFORM fetch_contract_accounts using lc_tabname .
    ENDIF. " IF sy-subrc EQ 0.
    *wrote the logic
    Modify the database table as per new dunning procedure from internal table
    MODIFY fkkvkp FROM TABLE lt_fkkvkp .
    *unlock the tbale
    CALL FUNCTION 'DEQUEUE_E_TABLE'
    EXPORTING
    TABNAME = uc_tabname .

  • HT3406 I want to deactivate my iPhone so I can receive text messages on my non-apple phone and use my iPhone as an iPod only. How do I do that?

    I want to deactivate my iPhone so I can receive text messages on my non-apple phone and use my iPhone as an iPod only. How do I do that?

    1800aplcare
    they can revoke ur imessage certificate for ur apple id and thus free up ur phone # out of the system

  • HT1420 No longer authorized to enter the account was used to five devices have exhausted all attempts to please you to the solution to this problem I reside in recursion and I'm not good at English Language

    No longer authorized to enter the account was used to five devices have exhausted all attempts to please you to the solution to this problem I reside in recursion and I'm not good at English Language 

    MMS will be available for the 3G and 3GS in two weeks - on Friday, September 25th - likely with a carrier update made available via iTunes.
    In the interim - for the next two weeks, ask the sender of an MMS to address the MMS to an email address that you access with the iPhone's Mail client - the sender will enter your email address in the To: field for the MMS instead of your cell phone number with area code. The MMS will be received by you as an email with the photo as an attachment. This will give you the sender's cell phone MMS email address. Add this email address to the contact's info in your iPhone's address book. If you want to send an email with a photo attached as an MMS to this person, address the email to their cell phone MMS email address. The email with the photo attached will be received as an MMS.
    This will be required for another two weeks.

  • I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

    I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

    What is the error? Are you following the Bootcamp instructions? Where on the "internet" are you trying to install from? Did you try downloading from here http://www.apple.com/support/bootcamp/downloads/?

  • Want to sort the columns while using GROUP BY ROLLUP.

    Want to order the below query using by "News' column in descending order and "Email address" column in Ascending order.
    Note: Sorting should not bring Total value to top. It is happening now.
    {code}
    SELECT decode(grouping(NVL(Client, 'NA')),1, 'Totals', NVL(Client, 'NA')) "Email (Login ID)",
    Location "Location",
    SUM(News) "News",
    SUM(Website) "Website",
    FROM VW_FX_USERDATA
    GROUP BY ROLLUP (((NVL(Client, 'NA')),Location,1, 'Totals', NVL(Client, 'NA')))
    {code}
    PLease let me know if you need any details.
    Edited by: Nagaraja Akkivalli on Sep 23, 2011 4:04 PM

    Thanks hm,
    Let me explain bit clearly.
    Say I am getting resultset as below.When I am executing above mentioned query.
    Client*        Location    News      Website       Total
    ABC        YD           9     0           4
    BCD        HB           12     7           13
    CDE        SI            1     18           3
    JNM        BI          25     0           4
    ZZZ        TI          0     221           77
    XYZ        TT          0     1           1
    Totals                      47     247           435I want it to as below. Here records are sorted in the descending order of the News Count and then Client*
    Client*        Location    News      Website       Total
    JNM        BI          25     0           4
    BCD        HB           12     7           13
    ABC        YD           9     0           4
    CDE        SI            1     18           3
    XYZ        TT          0     1           1
    ZZZ        TI          0     221           77
    Totals                      47     247           435If I order the column by News in the descending order, it is taking Totals value to the top. (Since I am using GROUP BY ROLLUP).
    Note: Sorting should not be applied to Totals.
    Hope this is clear to you. Let me know if you need any details.
    Thanks and Regards
    Nagaraja Akkivalli.

  • I want to know the function moulde used to convert the unit of measure

    The whole process should be done in the Portugues login language.
    For the login language PT( Portuguese). In table MARA, if i choose the menu settings-> use parameters-> and chek this field (conversion field exit) . Then for any material if i check the unit of measure (MEINS), is display of all the material its shows differently, but if i select one material and see all the fields of that material, the MEINS field is changed. For example when all the materials are show the MEINS is ST. but when i select one material and display it . it shows PEC in portugues language.
    I want to know the function moulde used to convert the unit of measure

    HI,
    There exits the conversion routine for that particular field in its domain level..
    copy that conversion routine and search for that in SE37 your conversion routine
    you will find the function module this gives you the internal and external formats
    Fms are listed below for MEINS
    CONVERSION_EXIT_CUNIT_INPUT    Conversion exit for commercial (3-char) measurement unit INPUT
    CONVERSION_EXIT_CUNIT_OUTPUT   Conversion exit for commercial (3-char) measurement unit OUTPUT
    For convertiung quantity into base unit of measure you can do this way
    CALL FUNCTION 'ME_CONVERSION_MEINS'                       "#EC *
        EXPORTING
          i_matnr             = "give material number"
          i_mein1             = "Unit of measurement "
          i_meins             = "base unit of measure
          i_menge             = "quantity
        IMPORTING
          menge               = "quantioty in your required measurement
        EXCEPTIONS
          error_in_conversion       = 1
          no_success                = 2
          OTHERS                    = 3.
    HOpe this helps you
    Reward if useful
    regards,
    nazeer
    Message was edited by:
            nazeer shaik

  • Configure WRT54G Wireless Router with PUBLIC IP address and use DHCP for internal computers

    Hi,I have an Internet online service with 5 public IP addresses. The router and the AP are connected to a switch. I would like to configure a WRT54G wireless router with one of this IP public Address and use DHCP (with private ip address)  for the computers that will connect to the AP. As the AP is connected to the switch it is possible that other wired computers that are connected to the same switch can obtain an IP address from the DHCP ?
     Thansk in advance
     

    Thanks for your help. Please correct me if Im wrong. After connecte the equipments the way you suggestI setup a static IP address (The public IP)  in the WRT54GI enable DHCP in the WRT54G with a range from 10.10.0.100 to 10.10.0.200 (as an example) The gateway is the Public IP address right ? How do I route the 10.10.0.x addresses to the public IP address. Thansk again 

  • I want to change my primary email address, and use one already associated with my account why can I not do this ?, I want to change my primary email address, and use one already associated with my account why can I not do this ?

    I want to change my primary email address, and use one already associated with my account why can I not do this ?, I want to change my primary email address, and use one already associated with my account why can I not do this ?  I don't want to create another one if I really don't need to
    Any ideas ?

    I'm afraid that once an address has been associated with an Apple ID you can't re-use it in any way. You will have to create another address (such as a free on from GMail or Yahoo for example).

  • I have an 27 inch apple iMac 2010. Can I upgrade by buying a Mac book pro and use plug in and use the iMac as a screen only?

    I have an 27 inch apple iMac 2010. Can I upgrade by buying a Mac book pro and use plug in and use the iMac as a screen only?

    Yes your 2010 supports Target Display Mode using MiniDisplay Port input.
    check out FAQ #4 > Target Display Mode: Frequently Asked Questions (FAQ) 

  • How do i delete my primary email address and use one of my alternate email adresses as my primary email address

    how do i delete my primary email address and use one of my alternate email adresses as my primary email address

    Hey freightguy,
    It sounds like you want to change your Apple ID. Follow the steps in this link to do so:
    Before you change your Apple ID:
    Sign out of all Apple features and services that you use with your current Apple ID.
    Make sure that the email address you want to use for your Apple ID meets these conditions:
    The email address is one that you use regularly, because it will be the primary email address for your Apple ID.
    The email address is not associated with any other Apple ID.
    The email address is not an iCloud email address, which is already an Apple ID. iCloud email addresses end with @icloud.com, @me.com, or @mac.com.
    To change your Apple ID, follow these steps:
    Go to My Apple ID (appleid.apple.com), click "Manage your Apple ID", and sign in.
    If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID. If you are unable to receive messages at your trusted device, follow the guidelines for what to do if you can't sign in with two-step verification.
    In the "Apple ID and Primary Email Address section," click Edit.
    Enter the email address you want to use, then click Save Changes. Apple will send a verification email to that address.
    Open the email from Apple, then click Verify Now in the email.
    When the My Apple ID page opens, sign in with your renamed Apple ID.
    If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID.
    After you see a message indicating that verification is complete, remember to update all of the stores and services that you use with your Apple ID.
    from:
    Apple ID: Changing your Apple ID
    http://support.apple.com/kb/HT5621
    If you're instead talking about changing the signed in email address you're using for the Mail app on your iPhone, check out the steps in here:
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    Have a great day,
    Delgadoh

Maybe you are looking for