I want to extend Join this Communities in Sharepoint

I have used community site, now on click of Join this Community, i want to add user to a security group, subscribe him to alerts and some other actions. not sure how to extend the button, or how to tap this event, i tried writing an event handler that
will tap AccessRequest list, but it doesn't work.  I know Enable-Auto Approval is available only if it is a root site of site collection.
I don't want to replace the Join webpart, as I have number of communities, i just want to some how tap into this

Sounds like you are really confused.  This is really easy to do with Lion.
Move the Express to the same general area as the Time Capsule for the following operations:
Power up the Express and let it run for a minute
Hold in the reset button on the Express for 9-10 seconds and release
Allow a full minute for the Express to display a slow, blinking amber light
On your Mac running Lion....click the fan shaped AirPort icon at the top of the screen and wait 5-10 seconds for the heading that reads New AirPort Base Station to appear
Click on the AirPort Express listing just below that and AirPort Utility will open automatically
Allow a minute for AirPort Utility to analyze your network and then announce that the Express will be configured to "Extend" your wireless network
Enter a Base Station name for the AirPort Express that you want to use....example AirPort Express......and then click Next
Wait another minute or two for AirPort Utility to automatically configure the AirPort Express.
When you see Setup Complete, click Done.
Move the AirPort Express approximately half the distance from the Time Capsule to the general area that needs more wireless coverage and power it up.
You are all set.

Similar Messages

  • I get the message: "Your Appple ID has been disabled" when I try to download a subscription paid magazine (The Economist) from the App store.  However, the same Apple ID was accepted when I joined this forum.  What can I do to reenable my Apples ID?

    I get the message "Your Apple ID has been disabled." when I try to download to my iPad a subscription paid magazine (The Economist) from the App Store. For what it's worth, the same Apple ID was accepted when I joined this Discussion Group.  What must I do to get my ID enabled?  I have been unable to find any explicit instructions online.  Thank you.
    Gordon Bailey

    i have had the same message when i wanted to download an app. I have had to reset my pasword and its been fine, but it has happened twice in the last two weeks!!! Still not sure Why its happened???

  • I have installed Airport Extreme on my iMac, but want to extend the wireless network with Airport Express. Everything is fine until I try to select Extend the wireless network.  I select Extend Wireless network but have no success. Ideas?

    I have installed Airport Extreme on my iMac, but want to extend the wireless to rooms with a weak signal.  The internet connection is fine with the basic setup. As soon as I go into Airport Utility to select Extend Wireless Network and fill in what I believe is proper information, I get an error message that Airport Extreme no longer has an IP address, the internet connection is broken, and under Wireless, that there is a wireless network in existence that can't be found. Rebooting the modem only brings the Airport Extreme back to the starting gate so that the internet is once again available.  I assumed (naively) that with the All Mac All-the-Time context, adding Airport Express would truly be Plug and Play.   I got the plug, but no play.  I asked a Comcast technical specialist about it and he said that I needed to reset the Airport Express settings back to their default, factory status.  I looked that process up online and found out that the way to do that was to hold down the reset button, then plug Airport Express into the socket and wait for the green light to flash four times.  Then wait 45 seconds and the default settings will return.  I did all that, only to find out that after the initial flash of green, green never appeared again.  I got a fast flashing yellow light, followed by the light going off.  Apparently this didn't reset it properly.  So, after hours trying to get this system to work, I appeal to someone who can see through this mess and provide the key to success!
    highFly376

    Let's see if I can get this straight.
    You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
    Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
    Correct?
    See this Apple document:
    http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
    The wireless unit on the right of the diagram can be either of the newer Apple base stations.
    Extreme, Express, Time Capsule

  • HT1515 I want to extend my existing wireless router upstairs to my new smart TV.  I have loaded the AirPort Express onto my desktop Mac.  In simple terms do I now just plug the AirPort into a socket halfway between the base WiFi and the Smart TV, or do I

    I want to extend my existing wireless router by using the AirPort Express for my Smart TV.  Can I just plug in the AirPort halfway between the router and the Smart TV and have no direct connection to a computer or the TV, or do I need to plug in next to the TV and somehow connect the AirPort to the TV (ethernet)?

    You are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
    You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
    As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
    An Extreme's Guest network is separate from its Main network; that is the reason for having it.

  • I currently use Airport Extreme Wanting to extend using another apple airport express

    How to set up Airport Express when already using Airport Extreme to extend range.

    Extending the range of an 802.11n network
    AirPort Utility makes it simple to extend the range of an 802.11n network if you are connecting another 802.11n base station. Connecting two 802.11n AirPort Extreme Base Stations greatly simplifies the WDS setup process.
    To extend the range of an 802.11n network:
    Open AirPort Utility and select the base station that will connect to the Internet.
    Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
    Click AirPort in the toolbar, and then click Wireless.
    Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
    Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
    Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
    Enter the network name and wireless password if necessary.
    Click Update to update the base station with new network settings.

  • I keep getting this error message and the spinning wheel on all websites, any fix? (Webpages are not responding, so loading cannot be stopped. Do you want to force reload this page and all pages in other tabs and windows?)

    I keep getting this error message and the spinning wheel on all websites, any fix? (Webpages are not responding, so loading cannot be stopped. Do you want to force reload this page and all pages in other tabs and windows?)

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.

  • Join this two table HELP

    Hi to all.. i have this two table , the problem is i dunno how to join this two table into one, becoz in the forms i have two button "BUTTON A IS FOR TABLE A WHICH IS THE EMPLOYEE.. AND BUTTON B IS FOR ADMIN... WHAT I WANT IS TO MAKE THIS TWO BUTTON INTO ONE BUTTON.. i;m using form6i and run in client server..
    Guys any one here know plz help how to do this..
    TABLE 1
    BEGIN
    iF :username IS NULL THEN
    MESSAGE ('Please enter Username ');
    MESSAGE ('Please enter Username ');
    GO_ITEM('username');
    RAISE FORM_TRIGGER_FAILURE;
    end if;
    IF :PASSNAME1 IS NULL THEN
    MESSAGE('Please enter password.');
    MESSAGE('Please enter password.');
    GO_ITEM('PASSNAME1');
    RAISE FORM_TRIGGER_FAILURE;
    end if;
    select username,passname
    into :pass.username,:pass.passname1
    from Employees
    where :pass.username=username
    and :pass.passname1=passname;
    Message('Access Granted');
    Message('Access Granted');
    go_block('maina');
    hide_view('pass1');
    exception
    when no_Data_found then
    set_alert_Property('wrong',Alert_Message_text,'Invalid Password');
    if show_alert('wrong')=alert_button1 then
              go_item('PASSNAME1');
              :passname1:=null;
              end if;
    end;
    TABLE 2
    BEGIN
    iF :username IS NULL THEN
    MESSAGE ('Please enter Username ');
    MESSAGE ('Please enter Username ');
    GO_ITEM('username');
    RAISE FORM_TRIGGER_FAILURE;
    end if;
    IF :PASSNAME1 IS NULL THEN
    MESSAGE('Please enter password.');
    MESSAGE('Please enter password.');
    GO_ITEM('PASSNAME1');
    RAISE FORM_TRIGGER_FAILURE;
    end if;
    select username,passname
    into :pass.username,:pass.passname1
    from Admin1
    where :pass.username=username
    and :pass.passname1=passname;
    Message('Access Granted');
    Message('Access Granted');
    go_block('maina');
    hide_view('pass1');
    exception
    when no_Data_found then
    set_alert_Property('wrong',Alert_Message_text,'Invalid Password');
    if show_alert('wrong')=alert_button1 then
              go_item('PASSNAME1');
              :passname1:=null;
              end if;
    end;

    like i told you before in this posting How to join this two tables
    use a union
    select username,passname
    into :pass.username,:pass.passname1
    from Employees
    where :pass.username=username
    and :pass.passname1=passname
    union
    select username,passname
    into :pass.username,:pass.passname1
    from Admin1
    where :pass.username=username
    and :pass.passname1=passname;

  • I want to extend a JPanel

    I have created a panel namely xyz.java which includes two combo boxes. I need another panel which has three combo boxes. Two of the combo boxes are same as that of xyz.java. I want to extend xyz.java by creating extendedxyz.java.
    Can any one help me in this regard.
    Thanks.

    Rough example for what you'd like to know:
    class Xyz extends JPanel {
      public Xyz() {
        add(new JComboBox());
        add(new JComboBox());
    class ExtendedXyz extends Xyz {
      public ExtendedXyz() {
        add(new JComboBox());
    }Though I'm not sure whether inheritation is a good approach for what you want to achieve. Instead, you could just add an instance of Xyz as a sub-component of panel ExtendedXyz.

  • I want to extend my wireless coverage.

    I want to extend my wireless coverage.  I have an Airport Express (AE) that is at least 5 years old, possibly older, which is connected by Ethernet from my ISP's router.  I've been uninterested in upgrading its software because the last time I did, 3 years or so ago, the unit regularly dropped out even though the light remained green and I had to reboot it to get it working - almost daily.
    The upshot is that it is working well at the moment with antiquated software.
    I just bought a brand new AE and want to extend the coverage on my wi-fi network wirelessly. I understand that this should be easy to do but I have a few questions before I begin.
    Should I leave the old unit where it is and add the new unit to it or should I put the new unit first in line at the end of the ethernet cable?
    I'm concerned that I'll have to start all over because I don't have a record of the password I used to set the unit up using the airport utility.  The network itself is unprotected by a password intentionally.  I'm concerned that if the new unit goes in first place, at the end of the ethernet cable, and requires the current software, that the older unit will not work.
    Get Info reveals the following about my current Airport Express:
    Card Type:     AirPort Extreme  (0x14E4, 0xE9)
      Firmware Version:     Broadcom BCM43xx 1.0 (5.106.98.81.22)
      MAC Address:     28:37:37:19:82:96
      Locale:     FCC
      Country Code:     X0
      Supported PHY Modes:     802.11 a/b/g/n
      Supported Channels:     1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
      Wake On Wireless:     Supported
      AirDrop:     Supported
    I'll appreciate your help.
    Paul

    Should I leave the old unit where it is and add the new unit to it
    You can't. The older AirPort Express has only one Ethernet port, which is connected to your ISP's router.
    Remove your older Express and set it aside for the time being. Connect the new AirPort Express to the router and make it work. Once that task is complete we can discuss the possibility of adding your older Express to extend the range of your new Express's network.
    Five years old places it on the cusp of the original 802.11b/g - only Express, and the first 802.11n Express, so you need to determine which one it is before attempting to configure it. Also, the AirPort information you posted is not for the Express, it is for your Mac's wireless card. Your Mac can use any AirPort Base Station but your OS X version must be determined as well as your older Express's model number. Look on its case for a four digit model number preceded by the letter A.

  • Want to extend my WLAN (ZyXEL) using 2013 airport extreme; doesn't work... Any ideas?

    Hi
    I want to extend my WLAN (using a ZyXEL VDSL-modem) with 2013 airport extreme. Doesn't work. What am I doing wrong?
    Does APE only work with Twisted Pair cable? That's the only way so far I can access the Internet using APE. But that was not my plan when I ordered it. So - am I wrong or is there a solution (without buying airport express on top of it …)?
    I am using AP utility v 6.3.1., OS X 10.8.4.
    Thanks
    swissgerman

    In your case, you will need to connect the AirPort to the ZyXEL product with an Ethernet cable.
    As far as your question of Does APE only work with Twisted pair cable?
    I cannot answer for all products. I said "probably" because as far as I know and have tested....the Apple products will not "extend" a signal from another manufacturer wirelessly.
    There might be a product that works with Apple. But, someone else will have to tell you what that product might be.
    If you want to extend using wireless with Apple.....as far as I know.....it takes two Apple products to do this.

  • If both you and the person you are texting have iMessage, and that person's phone is dead... Will it/Can it still be sent as an imessage? I am getting different answers from people. I want to know if this person was being untruthful about there phone bein

    If both you and the person you are texting have iMessage, and that person's phone is dead... Will it/Can it still be sent as an imessage? I am getting different answers from people. I want to know if this person was being untruthful about there phone being truthful.

    IF that is the only iDevice activated for that recipient, then no. It should not successfully send as an iMessage if the phone is powered off or has no data connection. If you have Send as SMS turned on, it should automatically fallback to SMS after a few minutes. Of course, they won't get this until they power on their phone, assuming they have a text messaging plan with their carrier.

  • An External Hard Drive says read only, I want to write to this drive.  How do I change this?

    My external hard drive, which is connected via firewire, changed to a read only drive.  I want to write to this drive.  How do I change the setting to write to the drive?

    If the drive comes from the Windows world, it will probably have an NTFS format. MacOS doesn't like NTFS and won't write to it. Would have to get some third party driver to enable writing.

  • Erased all content on 3G but now won't sync with iTunes. Error states, "This iPhone cannot be used because the Apple Mobile Device service is not started." I don't want phone service on this old 3G. Just want to use it as an iTouch. Any suggestions?

    Erased all content on 3G but now won't sync with iTunes. Error states, "This iPhone cannot be used because the Apple Mobile Device service is not started." I don't want phone service on this old 3G. Just want to use it as an iTouch. Any suggestions?

    Type "Apple Mobile Device service " into the search bar at the top of this page by "Support"

  • Firefix sad:"Copy/Cut/Paste is not available in Mozilla and Firefox. Do you want more information about this issue?" But,I can do the that from Opera...What should I do?

    Copy/Cut/Paste is not available in Mozilla and Firefox.
    Do you want more information about this issue?
    That's what Firefox sad to me...I was Rich text editing,but I can
    not use copy paste on.
    I did the same site and Rich text editing with Opera,
    and there was no problem.
    I love Firefox,and I want ti use it,but if this is not posibile to do in Firefox,I must go with Opera from now on.
    Pleace,responde to me,I need to fix a problem.
    I hope you understanded my Engish!
    Thank you...

    Try to use the keyboard if the buttons on the web page aren't working.
    * Copy: Ctrl+C or Ctrl+Insert
    * Paste: Ctrl+V or Shift+Insert
    * Cut: Ctrl+X or Shift+Delete
    See:
    *http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
    *https://addons.mozilla.org/firefox/addon/allowclipboard-helper/

  • Copy/Cut/Paste is not available in Mozilla and Firefox. Do you want more information about this issue?

    Copy/Cut/Paste is not available in Mozilla and Firefox.
    Do you want more information about this issue?
    Yes!

    https://support.mozilla.com/en-US/kb/Clipboard+not+working
    This extension will help you set the necessary permissions - Allow Clipboard Helper extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/852

Maybe you are looking for