I want to extract audio from a video file into logic

I have a video thats in the .WMV format and i want to extract certain bits of audio from it, how can i do this within Logic Pro 7.

A quick google search on "convert WMF to quicktime" came up with this program: http://www.programurl.com/software/quicktime.htm
Never used it, but it might be what your looking for?
BTW, did you try just exporting the audio in WMP? Is that possible? I obviously dont use it You may also try to drag the file into logic and see what happens. Though I doubt it will work, its worth a try.

Similar Messages

  • Downloading audio from a video file from iTunes?

    I have a 40G 4th Gen click wheel iPod (no color or video). Is there a way to download just the audio from a video file that I have in iTunes?

    I use Steve's method all of the time, and edit the Audio output in Adobe Audition. You will want to Export/Share to PCM/WAV @ 48KHz 16-bit, and keep that format both going and coming back into PrE. Remember that you will be working with an Audio file, that is the full (or almost) Duration of the Timeline. When you Import that edited Audio file, give the program a few moments to Conform that newly Imported PCM/WAV for editing. I suggest not touching the computer, until Conforming has completed 100%, and the little progress bar in the lower-right of the GUI has disappeared. If the Imported Audio file is short, and your computer is fast, you might not even see that progress bar, but the Conforming has taken place, just the same.
    I like to keep the original Audio on its Audio Track(s), and just use Window>Audio Mixer to Mute that/those Track(s), leaving only my edited Audio on its own Track un-Muted. This is a "fail-safe," just in case I change my mind along the way, and wish to revert to the original Audio for some reason. It is much easier to Mute-Unmute, than to gather up all of that original Audio again.
    Good luck, and happy editing,
    Hunt

  • IPhone 4S keeps playing audio from a video file that is no longer on my phone.

    If I'm listening to music and try to change tracks or pause with the earbud buttons the music fades out and starts playing audio from a video file. It will only play about 3-4 seconds and then stop. This also will happen when double clicking the home button to try and change tracks. When I do that the track skipping buttons won't work and there's no title for the short bit of audio that plays. The only way to get music to start playing again is to go into music and press play again. The music I had been listening to is sitting there paused. The audio from the mystery video file still sometimes plays even when you're in music and the only way you would know is the little play icon at the top right part of the screen. I have removed every video off of my phone and it still does it. This is really frustrating.

    Sounds like a bad battery.  You'll need to bring the phone into Apple for evaluation.
    I'm sure you've been using your phone as designed and properly backing up your data, so you should have minimal, if any data loss should the phone need to be replaced.

  • Can I  rip the audio from a video file?

    I have a video file with a band singing on it. I have an ipod nano, so I can't import the video with the singing onto my ipod. Is there anyway to rip the audio from the video file and put that onto my ipod?
    -Thanks

    Open the video in Quicktime Player.
    Select the Export menu item.
    Change the Export type to "Sound to Wave".
    Save the WAV file somewhere with the default settings.
    Load the WAV file into iTunes and use iTunes to convert it to AAC for the Nano.

  • Hi i am new to labview. i want to extract data from a text file and display it on the front panel. how do i proceed??

    Hi i am new to labview
    I want to extract data from a text file and display it on the front panel.
    How do i proceed??
    I have attached a file for your brief idea...
    Attachments:
    extract.jpg ‏3797 KB

    RoopeshV wrote:
    Hi,
    The below code shows how to read from txt file and display in the perticular fields.
    Why have you used waveform?
    Regards,
    Roopesh
    There are so many things wrong with this VI, I'm not even sure where to start.
    Hard-coding paths that point to your user folder on the block diagram. What if somebody else tries to run it? They'll get an error. What if somebody tries to run this on Windows 7? They'll get an error. What if somebody tries to run this on a Mac or Linux? They'll get an error.
    Not using Read From Spreadsheet File.
    Use of local variables to populate an array.
    Cannot insert values into an empty array.
    What if there's a line missing from the text file? Now your data will not line up. Your case structure does handle this.
    Also, how does this answer the poster's question?

  • We want to extract mailboxes from exchange bkf file?

    We want to extract mailboxes from exchange bkf file? It there any manual method to get back mailboxes from bkf? Please suggest. It's urgent!
    Don't recommend me any third party software, please!

    Hi , 
    Then you could use the recovery storage group feature in exchange 2007 to extract the items from the restored backup for the selected mailboxes .
    Rererence link : http://www.msexchange.org/articles-tutorials/exchange-server-2007/high-availability-recovery/Working-Recovery-Storage-Groups-Exchange-2007.html
    Thanks & Regards S.Nithyanandham

  • How to extract audio from a video clip

    I am editting a video, and I need to extract the audio from a video clip. On the old iMovie it was really easy, all you had to do was press apple K I think. Thanks in advanced for your help.

    Select the clip in the sequence.
    Then command-L to unlink the clips.
    Then select the audio and delete.
    As a suggestion, two things:
    1. Explain what you want to do. If it is delete the audio, then that is different than extracting the audio;
    2. Do a search in the pdf manual in the help manual

  • How do I extract audio from a .cpvc file?

    I have a .cpvc file that I would like to extract audio from.
    How do I do this? It doesn't seem clear in what I have Googled so far.

    Hi there
    Try clicking the Library button. Locate the audio, right-click and choose Export.
    Cheers... Rick

  • Extracting audio from purchased videos

    Is there a way to extract the audio from videos purchased through iTunes? I'd like to buy some of the video albums, but since I don't have a new iPod that will play them, I'd like to at least get the audio to my iPod.
    Thanks,
    John

    The only way I know of would be to to capture the output of iTunes using a utility such as Audio Hijack or Wiretap. Either of those utilities can save the captured audio in a format that iTunes can re-import and transfer to your iPod.

  • Cut audio from a video file and edit in an audio editor?

    Using Pre 9 and a Nikon D7000 video file: Is it possible to cut the audio portion of a movie clip (where the audio was recorded in the camera and is part of the import), edit in an audio editor (I like Sony Sound Forge Studio), then paste it back into the clip?

    I use Steve's method all of the time, and edit the Audio output in Adobe Audition. You will want to Export/Share to PCM/WAV @ 48KHz 16-bit, and keep that format both going and coming back into PrE. Remember that you will be working with an Audio file, that is the full (or almost) Duration of the Timeline. When you Import that edited Audio file, give the program a few moments to Conform that newly Imported PCM/WAV for editing. I suggest not touching the computer, until Conforming has completed 100%, and the little progress bar in the lower-right of the GUI has disappeared. If the Imported Audio file is short, and your computer is fast, you might not even see that progress bar, but the Conforming has taken place, just the same.
    I like to keep the original Audio on its Audio Track(s), and just use Window>Audio Mixer to Mute that/those Track(s), leaving only my edited Audio on its own Track un-Muted. This is a "fail-safe," just in case I change my mind along the way, and wish to revert to the original Audio for some reason. It is much easier to Mute-Unmute, than to gather up all of that original Audio again.
    Good luck, and happy editing,
    Hunt

  • Extract audio from MP4 movie file to iTunes library

    I downloaded a 5-minute movie, it's now sitting on my desktop as a mp4 QuickTime file, opens and plays fine. I want to turn the audio soundtrack of the movie (one complete song) into an mp3 in my Music library, so I can just play the song on my iPod without opening the movie file (I have an older iPod 60GB that doesn't play movies). Please advise, thanks

    Open the movie in the QuickTime Player and Select Export -> Sound to AIFF.
    Drop the exported AIFF file into iTunes.
    Make sure the iTunes CD Import Settings in Prefs is set to the MP3 encoder.
    Right-Click on the AIFF file in the iTunes Library display and select Create MP3 Version.

  • I want to extract data from oracle dump file (.dmp) using oracle database or any other tools.

    There is import which provides me data as graphical way. But i need extract data in such a way so that i could able to use in my application.
    thanks,
    mohan

    This isn't a SQLDeveloper question. You will get better answers in the Database - General forum.
    Oracle dump files produced by the exp or expdp utilities are inproprietary formats which can only be read by the imp or impdp utilities respectively.
    The best way to get data out of a dump file is to import it into a database and then extract it to plain text files using SQL.
    Alternatively, leave it in the database and your application can access it there.
    The exp dump file is mostly plain text, but the format is not published so you could waste a lot of time figuring it out.

  • What is the best way to get audio from a regular cd into logic?

    I need to get some music of a regular music CD into Logic. When doing something like this on a PC I'd get some third party software to rip the CD and convert into audio files that I'd use in the Daw. What is the simplest way on a Mac?

    1. insert CD (der...)
    2. open iTunes and click 'inport cd'
    3. when the tracks are finished inporting drag them into a play list (just to keep things tidy.)
    4. select the tracks you want in logic.
    5. drag the tracks where you want them in logic
    note: when you drag the tracks in logic will create an overview for the tracks, this could take a while depending on the length of the son.
    hope this helps.

  • How to extract audio from home video

    Hello all,
    I am trying to compile an iMovie and I imported a home video shot with my Sony DSC T7 and when iMovie imports it. There is no audio!??! Is there a way for me to use the power of my Mac OS X and extract the audio before I import and then bring both into iMovie seperatly? Or is there a way to bring it into iMovie with sound? I'd appreciate the help. Thanks,
    Lorne17

    iMovie should import the audio/video together. Maybe you should re-post your question in the iMovie forum. It's possible that someone there had the same problem and knows the solution.

  • How do you extract the audio from MP4 video files in iMovie 8?

    Trying to pull the audio out of an MP4 file.  Any and all help is appreciated.  Thanks in advance.

    Share your project using SHARE/EXPORT USING QUICKTIME.
    Choose SOUND TO AIFF.

Maybe you are looking for

  • Is there any way to tell the last date my ipod was plugged into my computer?

    OKay, this may be a techie question, but I'm pretty savvy so if this info is contained in a file somewhere, you can feel free to explain how to find it, I can look for it. i Misplaced my iPod nano at some point in time, and knowing the last date I sy

  • Blue screen, impossible to detect, update and restore

    This is basically what happened a wekk ago before my holiday. * tried to update songs, iTunes did not recognize my iPod * got a message in a yellow balloon at the start bar with a HDD error and that I needed to preform CHKDSK (check disk for errors)

  • File Upload PJC questions

    File Upload PJC I have installed the File Upload PJC demo & got it working. We are using Forms 6i patch 8 with servlet configuration, iAS 1.0.2.2.1 on Win 2000, Oracle 8.173 We want to upload/download files to the server & save them as BFILES in the

  • CE Benchmark/Performance Best Practice Tips

    We are in the early stages of starting a CE project where we expect a high volume of web service calls per day (e.g. customer master service, material master service, pricing service, order creation service etc). Are there any best-practice guideline

  • IE7 Beta 3 not able to Read webhelp HTM

    IE7 is running fine on my WinXP Pro SP2 computer - except that it balks at showing any webhelp or webhelp pro HTM files that Robohelp X5 generates. If I upload the files to a server, then it shows them. I didn't keep careful history, but this didn't