I want to find out whats going on with Infinity, B...
well basically as the title says, i was suppose to have it end of march then the end of july and now the end of september, my contract is due to end soon as ive had nothing but problems since i joined BT and Infinity would be the only reason i would stay, the green Infinity boxes have been in for about a month or 2 now but still nothing, my postcode is NP11 3BA any help would be great, Thanks
Almost certainly because Openreach don't tell them. It's not that there isn't a commitment to hit the dates, it's more that there are so many things that can delay them - and the sheer amount of cabinets to be done means that Openreach can always move on to another location where they can actually go ahead with the work. It's all at the mercy of local councils, utility companies and so on - anything that needs roads or pavements to be dug up involves jumping through all sorts of hoops.
It's been said here many times before, but the only real solution is not to publish the estimated dates - and doing that would lead to a whole heap of other issues, there aren't many potential customers who'd be happy with "You'll get it when you get it."
Similar Messages
-
Final attempt to find out what's wrong with my pin...
This is my final attempt to find out what is wrong with my ping.
When I try and play online games, they become completely unplayable because very frequently but randomly the ping/latency (ping = milliseconds a request from your pc takes to get to server) spikes up from 20ms to 600ms! This makes it unplayable...
It happens on wired and wireless, any idea what's wrong?pippincp wrote:
A tracert would help. In windows 7 click the orb and enter cmd in the search box, open the cmd.exe and in the window type tracert bbc.co.uk post back a screenshot of the result.
Then access the HH5 and copy lines 1-12 in troubleshooting/helpdesk and post here.
Here's the tracert result to bbc http://pastebin.com/V4PKfksL
But you have to rememeber when i'm playing the http://pastebin.com/3hmGHS9K
Here's the helpdesk:
1. Product name:
BT Home Hub
2. Serial number:
+068343+NQ34341979
3. Firmware version:
Software version 4.7.5.1.83.8.173.1.6 (Type A) Last updated 15/01/14
4. Board version:
BT Hub 5A
5. VDSL uptime:
0 days, 11:30:25
6. Data rate:
15142 / 69665
7. Maximum data rate:
15041 / 68761
8. Noise margin:
5.9 / 6.2
9. Line attenuation:
0.0 / 18.5
10. Signal attenuation:
0.0 / 18.5
11. Data sent/received:
485.9 MB / 1.6 GB
12. Broadband username:
[email protected] -
I need to find out what the refresh rate is. I went into system preferences and clicked on display, and saw refresh rate, but it said n/a. I need mine to be at least 70 hz, I can't find the answer anywhere.
Where did you search? Read the information from Kappy in - https://discussions.apple.com/thread/3298134?start=0&tstart=0
-
Want to find out what USB I have
I'm trying to find out if my mac has USB 2.0 or not. I checked "about this Mac" and this is what I found- no reference to whether it is 2.0 or not. Can you tell me what version USB this machine has?
Vendor Name: Apple Computer, Inc.
Product ID: 32773 ($8005)
Speed: Up to 12 Mb/sec
Bus Power (mA): 500
Thanks for the help.
Dick SkoverThe speed tells you it's USB1.1. USB2 has a speed of up to 480Mb/sec. There are no G4s with USB2 built in.
John -
i just want to know what s going on with it it worked good when i bought it and it has been only a couple of month that i have had it
I have the same problem I use a BT home hub the old white one and a iPad 4 if I reboot the hub it works ok for pics and some I player content then when I try to load a certain program it crashes and I need to reboot the hub again. Is this a problem with the hub?
-
How can I find out what is wrong with swap image in a library
I had a DW8 site that used a library item on many pages with the calls to the macromedia swap image function. Everything was fine.
I've now converted to CS5.5 and I find that:
a) When the library item is changed, the updated pages don't have proper local relative paths. Instead they have the exact path in the library item itself.
b) I can't detatch the library item from a page, I get:
An error occured while loading behavior "Swap Image" Please check this file and associated JavaScript files for errors.
When OK'd this is followed by
Dreamweaver encountered an improper argument.
I went back to DW8, forced a library update and everything was fine. I've checked and so far as I can see, the swap image funtion is identical in the DW8 and CS5.5 versions.
I don't know if a and b are related,An example page with the associated files that might be involved in this
problem are copied into dummy files on the customer's site:
http://valeriewilding.co.uk/queens2.htm
http://valeriewilding.co.uk/vwqueens.js
http://valeriewilding.co.uk/topNavQueens.lbi
The equivalent working files (from DW8) on the site are
http://valeriewilding.co.uk/queens.htm
http://valeriewilding.co.uk/vw.js
The library file is not normally on the site and, if it was, it would be in
the library directory which could not normally be reached from the htdocs
folder. Going back to DW8 as a workaround has solved problem (a) - the path
error - but downloading these files into a CS5.5 environment should still
show problem (b), being unable to remove the attachment.
There is a second library item on the page, the bottom navigation, and this
can be detached without problem.
The folder structure on my PC is:
htdocs
--- queens2.htm
--- vwqueens.js
Library
--- TopNavQueens.lbi -
How do I find out what's wrong with my sound card?
I just tried to watch/listen to a video on Youtube and no sound was produced. I tried multiple other vidoes and the same thing happened. Then I opened Spotify to see if that would work, and it didn't, but it said that something was wrong with my sound card. I'm not sure exactly what that means, so if someone could potentially help me that would be great! My pro is about 8 months old so it should be having all these malfunctions (there have been others...)
On a side note, iTunes wouldn't even open due to "an unknown error".Try these:
for some of your issues, open disk utility and verify your disk permissions - repair if needed. might take an hour or less depending on how much errors needs to be repaired....once done, restart your macbook....
for your sound issue - do a PRAM/NVRAM reset....
good luck....hope you get it sorted out.... -
I have adobe reader installed on my Macbook Pro and also Adobe flashplayer installed. I am not anble to see any video from the net, news feeds, or anything like that on my computer. I cannot print off certificates that I need all it does when I attempt to print the certificate is that it shows that it is loading and comes back and tells me there was an error in loading the information. I would appreciate any help I can get. Thanks
Very Respectfully
Steven HetletvedtSMC Reset - check http://www.apple.com/support/macpro
Clean out the insides and especially the graphic card.
Both the 7300GTs could be failing, or X1900 with heat and dust (and causing the system fans to work harder)
Disk Warrior maintenance along with SuperDuper
Apple Hardware Test -
How do I find out what my total hard drive capacity is?
Hello, everybody!
My name is Evelyn Harvey.
I know that I am probably overlooking something obvious, but I hope that you all will bear with me!
I have noticed that when I click on the "waste paper basket", it tells me items are in the trash, and how many GB worth of stuff is in the trash, and how much free space (rounded off to the nearest tenth of a gigabyte, I believe), is still available on my hard drive.
What I can't seem to find out is, what is the theoretical total storage capacity of my hard drive? That is to say, how much space would there be if I didn't have any software or files on my hard drive at all? I know that they probably told me that when I first bought this particular iMac, but I do not remember now.
The reason why I want to know this, is because I want to find out what per centage of my total hard drive capacity is currently being used! There must be a way -- an easy way -- to find that out. Mustn't there?
Thanks in advance!
Evelyn HarveySelect the hard drive's icon on your Desktop. Press COMMAND-I to open the Get Info window. In the upper section you will see the information for capacity, available, and used.
-
How to Find out what are the top 20 queries executed in the system
Hi Guru's,
I would like to know how to gather the information regarding the Top 20 queries used in the system per week, by a multicube.
Note: I am using BI 7.0 and also Statistics are turned on.
People have provided me the Cube name and table name last time but nothing seems to work.
I do not have the query names and I just have my multiprovider name and with the help of that, I want to find out what are all the queries which were executed related to that multiprovider.
Thanks and regards,Hi,
Here is an idea for your request.
Basically you can create a simple query on multiprovider 0TCT_MC01.
Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
Choose following characters into your objects:
InfoProvider ( 0TCTIFPROV ) - you can create a variable for choosing infoprovider before query runs.
*Tp.[Type of BI Application Object] 0TCTBISOTYP = filter this with 'QUERY' or whatever your need is.
*BI Application Object 0TCTBISBOBJ, ( this will give you the name of the queries)
In key figures choose, Count for BI Appl. (0TCTWTCOUNT).
(number for query run)
Create a condition , for top 20.
Hope this helps.
Derya -
How do I find out what I'm doing in a package ? v$sql ? etc.
I'm running Linux and trying to find out at what point a process is at.
It is running a procedure in a package, lets say. Package_main.main(). If I join v$session to any of v$sql,v$sqlarea,v$sqltext all I get is the sql text relating to the "package_main.main()" call. I want to find out what point in the PL/SQL statck the execution is : what view should I be looking at ?
johnnie dI believe the problem you are describing has been identified as a design feature for 10g+. I have not spent any time looking at the issue.
If you do not need immediate access but want to see what a session was doing you might be able to turn on sql trace for an active session and then review the trace file after you have allowed the trace to run long enough to capture what SQL is being executed.
Being that all SQL would have a child cursor there should be a way to tie sql from within pl/sql being executed to the session executing the stored code. I just have not looked into this. Maybe someone else has.
HTH -- Mark D Powell -- -
my ipod touch 1st gen has gone into recovery and wont restore because of a error 1 or something like that can someone help me quick this ipod is my little cousins and i dont want her mum to find out what happend
I have not seen a solution for error (1)
make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
How do I find out what the red exclamation mark or "error" on page refers to in a i-photo book that I want to send to print?
If it's a text box it means the text has overflowed the boundries of the box. Check for line returns which won't be visible but will trigger the warning.
OT -
I got a text message which had a link attached to it, i did click on the link, basically some job scam but on the link. Now i just want to find out if my phone has been compromised in anyway and what are the tell tell signs.
your phone has not been compromised. There have been no viruses, worms or trojan horses ever reported.
-
I have a new computer and want to sync my iPhone/iTunes. But it wants to wipe out what is already on my phone with another iTunes library. How do I find out what is in the "library" before I say yes to wipe out my phone and sync?
See Recover your iTunes library from your iPod or iOS device.
tt2
Maybe you are looking for
-
Maverick and Your System message I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process. On my Macbook, everything functions perfectly. On my iMac, I get the Yo
-
Large Memory Usage and Frozen [thread dump attached]
Hi, SQL Developer (Version 2.1.1.64, WinXP Pro, Java 1.6, Oracle 10g R2) always uses at least 550MB of memory, if left open, for more than a day, it invariably goes up to 700-800MB. If I close all windows and connections, virtually no memory is recla
-
Indesign CS5 to Flash - limitations?
Hi, I'm new in here. I have recently started working in CS5, mainly to design digital mags, but it seems I have to eventually export it to a FLA. file and open in Flash so I can add some components that Indesign don't have. The problem is that I don'
-
Postings in shortened fiscal year period
Hi expert, We are trying to do a fiscal year change from Fiscal year variant V3 with Non Calendar year Apr to Mar to Calendar year. This will result in shortening the fiscal year to 9 periods and omitting period 10 to 12. However, for the company th
-
Jpg attachments corrupt under leopard mail and hang message
I-phone: Message shows fine Exchange on Leopard: Message shows up fine Leopard Mail Dual PPC G5: Message hangs Leopard Mail MacBook Pro Intel: Message hangs The only way to see the corrupted message is to choose "forward as attachment". When opening