I want to get a cd to install windows 7 ultimate 32bit oem hp in vietnam?

Hi
Please find the link given below might be helpful for you.
Order Recovery Discs for Windows 7, Vista, or XP
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

Hey. I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all... I searched drivers for the windows 8 32 bit but couldn't find any... Any solutions guys?

Hey everyone,
I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all...
I searched drivers for the windows 8 32 bit but couldn't find any...
Any solutions guys?
Thanks a lot.
Sincerely,
Chiponn

There's been an update for OSX ML which addresses the issue for installing Windows 8 on bootcamp.
It's NOT recommended that you Upgrade.. However, the way to get the drivers is:
You'll need an external USB drive formatted as FAT for this.
1) In OSX, start the Bootcamp Assistant
2) Press Next
3) UNTICK 'Remove WIndows 7 or Later Version'
4) TICK Download the Latest Windows Support Software from Apple
5) Insert USB drive
6) Press CONTINUE
The drivers should download, and copy a WIndowsSupport folder onto the USB drive.
I did notice that Windows 8 still requires beta drivers for some aspects such as VGA (the Radio HD Card), which you can get on the AMD website.
Futhermore, why are you using Windows 8 "32" bit when you blatently have a powerful 64bit?
Anyway, hope this post helps ;-)

My iphone 4s doesnt want to get recognized in itunes and windows 7

my iphone 4s doesnt want to get recognized in itunes and windows 7 and idk what to do

can u please help if u know what to do

Error 0x80300024 when trying to install Windows Ultimate 32 bit on a T60

I have been trying to install Windows Ultimate 32 bit on a T60 with a 128GB Solid state hard drive and I keep getting the error "Windows cant install to the current location Error code 0x80300024" I have formatted the drive in another PC, created the bit locker partition, but still windows says it is "unallocated space" Can anyone help please
Moderator note: OS corrected in subject line

Says "A problem occurred while extracting the archive. Please try downloading the Photoshop Lightroom 5.7.1 installer again".
Thanks!

Have recently installed windows 7 32bit operating system and it won't allow me to install iTunes, help??

Have recently installed windows 7 32bit operating system and it won't allow me to install iTunes, help??

Let's try the following document with that one:
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

MSI AMD FM1 A55-P33 - won't install windows 7 32bit

Hi there,
we have board the MSI AMD FM1 A55-P33 motherboard but for some reason we cannot install windows 7 32bit on it.
What does install flawlessly is:
All Windows7 64bit
Windows 7 Starter 32bit
We ( and also the local supplier here in South Africa ) have test the following components:
Power Supply
Ram
Ram Ports
Alternate Ram Manufacturer
DVD Writer
Hard Drives
Graphics Card
Onboard Graphics Alone
Board is running latest bios update.
and it still does not install.
They supplier has ordered in and tested the same model motherboard and it still does not install.
For me that means it could be the motherboard model or the cpu ( which is still being ordered in so an alternate can be tested )
When i say doesn't install, it installs until the very end where the installation restarts and goes into the installation one last time to finalize things
and then it throws a error and you can't complete the installation.
The local supplier has had the computer for 2weeks now with no success,
I was hoping someone here could assist us with a few suggestions.
Thanks to any advice given .

what is the exact error received?

Hello i would like to buy macbook air 11''' 2013 can i install windows 8 32bit?

Hello i would like to buy macbook air 11''' 2013 can i install windows 8 32bit with bootcamp,parallels or vmware?

This is an 'all in one' that should do the job.
http://www.amazon.com/Mini-DisplayPort-HDMI-Adapter-Cable/dp/B003OC6LWM
Ciao.

How do I get bootcamp back after installing windows 8?

Hi,
I have to admit, I messed up .. big time :-(
I had a nice working setup with OS X and Windows 7 and bootcamp.
Then I got a disc with windows 8. I installed it, and forgot to use my head!!
It was NOT a windows 8 update dics, so it installed windows 8, disgarding my windows 7 installation.
On top of that I had to delete most of the windows.old folder to get room for new instalaltions of the tools I need in windows 8.
But then I found out that bootcamp was not installed because there was no speaker sound on netflix and eventhough it could recognise that I had inserted a head set ..there was no sound. I couldn't use the FN key no more, bluetooth was dead and I couldn't switch back to my OS X because there was no bootcamp application to help me change back and I can't see the OS X partiion in windows 8.
On top of that, I can't find my !"¤!#"!!" OS X installation discs. Been looking for 2 days now and I'm getting desperate.
Is there anyone out there who can help me getting my bootcamp back on my windows 8 making me able to switch back to OS X and to get drivers installed for all my nice macbook pro devices in Windows 8 ??

The option key is not the command key. Hold Option, Command won't do what you want.
Press it when you hear the chime (not before) release it when you see the Boot Manager.

Mac gets blue screen while installing Windows 7 with bootcamp

I had a problem while trying to install Windows 7 Ultimate 64-bit on my MacBook mid-2010. When i would create the partition using bootcamp assistant and my computer restarted into the install process, i would get a blue screen. The blue screen would occur after my computer restarted and was completing the installation. If I try to reboot the machine, it gives me an error "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click ok to restart the computer, and then restart the installation." I first tried this on yosemite, but when it was not working I tried wiping the hard drive and i installed mavericks. I got the same problem, so it does not have to do with the OS. I have installed Windows 7 32-bit on this computer before. But i still get the same error with 32-bit also. I know that this computer supports windows 7 and 64-bit too. If anyone know why this might be happening and how i can fix it, please let me know. Thank you.

It is good to see that it is indeed a USB2.
The support software on the USB is used in the Pre-boot environment setup and provides drivers for Apple specific hardware, GPU, BT, Mouse, etc. You can verify that by looking at the USB contents. The DVD contains generic drivers when hardware is not recognized as defaults to use. Apple does enough 'secret sauce' to make them different. The following does not explicitly state the USB2 need when using the DVD Installer and mentions W8 (not W7).
From Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support
Insert a blank USB 2 flash drive that is a least 16GB in size into a USB port on the computer. Boot Camp Assistant uses this drive to store the Windows 8 install media and support drivers during installation of Windows.
Note: This flash drive needs to be formatted for the FAT32 file system and must use the Master Boot Record partitioning scheme. Use Disk Utility to check the format of the flash drive before proceeding, and partition or erase the flash drive if necessary.
I suspect the GPU is not getting the correct driver and the Installer fails. The Generic VGA should work. From the OS X side, can you see files in your BC volume? If yes, can you look for logs in the BC volume at the following locations.
./Windows/Inf/setupapi.dev.log
./Windows/Inf/setupapi.offline.log
./Windows/Inf/setupapi.setup.log
./Windows/Logs/SetupCleanupTask/setupact.log
./Windows/Logs/SetupCleanupTask/setuperr.log
./Windows/Panther/FastCleanup/setupact.log
./Windows/Panther/FastCleanup/setuperr.log
./Windows/Panther/setupact.log
./Windows/Panther/setuperr.log
./Windows/Panther/UnattendGC/setupact.log
./Windows/Panther/UnattendGC/setuperr.log
./Windows/setupact.log
./Windows/setuperr.log
./Windows/System32/Sysprep/Panther/IE/setupact.log
./Windows/System32/Sysprep/Panther/IE/setuperr.log

I5 17''MBP gets blue screen during install windows 7 32 bit

Hello all:
I heard that quite many people get classic windows' "blue screen" during using windows , whatever Windows XP, Vista or 7. But now i face the "blue screen" during install Windows 7, which means I even can not complete installation.
I bought my Macbook Pro i5 17'' one month ago, and I'm trying to install Windows 7 but I face the problem during the installation. After finishing first 4 steps the computer would restart and start to "finish installation", but at this time it gets "blue screen" and shows "error: 0x0000009c" and stuck there. I have to shut down the turn off button and interrupt the installation.
I don't know if there's any one else face this unlucky situation. I searched on the net and it says the problem could be from memory, graphic card (too new), or even overlocking the cpu,whatever it must be the problem of hardware. I thought it might be the problem of compatible.
If anyone knows how to deal with this problem??!! I do need to use some software under Windows system!

It is good to see that it is indeed a USB2.
The support software on the USB is used in the Pre-boot environment setup and provides drivers for Apple specific hardware, GPU, BT, Mouse, etc. You can verify that by looking at the USB contents. The DVD contains generic drivers when hardware is not recognized as defaults to use. Apple does enough 'secret sauce' to make them different. The following does not explicitly state the USB2 need when using the DVD Installer and mentions W8 (not W7).
From Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support
Insert a blank USB 2 flash drive that is a least 16GB in size into a USB port on the computer. Boot Camp Assistant uses this drive to store the Windows 8 install media and support drivers during installation of Windows.
Note: This flash drive needs to be formatted for the FAT32 file system and must use the Master Boot Record partitioning scheme. Use Disk Utility to check the format of the flash drive before proceeding, and partition or erase the flash drive if necessary.
I suspect the GPU is not getting the correct driver and the Installer fails. The Generic VGA should work. From the OS X side, can you see files in your BC volume? If yes, can you look for logs in the BC volume at the following locations.
./Windows/Inf/setupapi.dev.log
./Windows/Inf/setupapi.offline.log
./Windows/Inf/setupapi.setup.log
./Windows/Logs/SetupCleanupTask/setupact.log
./Windows/Logs/SetupCleanupTask/setuperr.log
./Windows/Panther/FastCleanup/setupact.log
./Windows/Panther/FastCleanup/setuperr.log
./Windows/Panther/setupact.log
./Windows/Panther/setuperr.log
./Windows/Panther/UnattendGC/setupact.log
./Windows/Panther/UnattendGC/setuperr.log
./Windows/setupact.log
./Windows/setuperr.log
./Windows/System32/Sysprep/Panther/IE/setupact.log
./Windows/System32/Sysprep/Panther/IE/setuperr.log

I have a Macbook pro with Retina Display, and need to get bootcamp. Which one should I get so I can install Windows 7?

I have to have windows so I can use CAD and photoshop for my classes. Any suggestions?

Boot Camp Assistant is in your Utilities folder. You will have to purchase Windows somewhere. Preferred would be 64-bit Windows 7.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
   1. Install the Apple Boot Camp software. Purchase Windows
         XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
         4.0 and above you can only use Windows 7 or later. Follow
         instructions in the Boot Camp documentation on
         installation of Boot Camp, creating Driver CD, and
         installing Windows. Boot Camp enables you to boot the
         computer into OS X or Windows.
     2. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     4. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     5. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

How to install windows 8.1 oem (without installation CD) with Parallels on Mac?

Have bought a Parallels Desktop 9 bundle that came with Windows 8.1 OEM (with just the product key and no CD). Have successfully installed Parallels on my mid-2013 Macbook Air (without any previous Windows), but just don't know how to install the Windows. The Windows envelop just contains licensing details, no procedures included. Have tried to download the "Windows ADK" thing from the Microsoft OEM page, just wouldn't install at all. Pls help!!! Many thanks!!

Hi LonerT. I'm sure that's correct!
Again, for anyone trying to install Windows8.1 (on parallels-Mac), just as you say "Microsoft also has an online store, which [could] be leveraged to accept Product Keys and allow media downloads on any OS......"
Indeed, it's a real trap that if you go to the MSFT online store, it says "pay and download!" But in fact - believe it - the only thing you can download is a small Windows program (!!!) which can only run ON WINDOWS (!!!!!), which is then a "download manager". Which is kind of bizarre if you think the whole idea is, that it is someone BUYING WINDOWS because they DON'T HAVE IT!
If you read the discussion lists even Windows dudes get furious at it - it's like "just have a f'ing link to the file, the iso file". What the heck is the point of downloading a "Download Manager" ??? Anyways.
{If, for some reason, you DO HAVE ON HAND the actual DVD (64bit) for Windows8.1, then yes you CAN JUST BUY A PRODUCT KEY online at MSFT's store, which is great. But then, very few people actually buy Windows8.1 on dvd -- when you buy a "windows laptop" it has a whacky OEM version, etc.}
It's great fun to have Windows8.1 running in a window on your Mac! (See image below.)
But again, after vast investigation we found YOU DO NEED TO GET A PHYSICAL DVD. Fortunately they sell Windows everywhere, you can grab a copy at the local supermarket!
(You can run Windows8.1 in a mac window, or, full screen as you prefer. We have had no problems with macs with any number of extra displays, it seems to figure it out.)
You want the box that looks like this .. "8.1 version complete"
Use only the 64bit disk, throw away the 32bit disk. The box includes a product key on a piece of plastic. Again if by coincidence you have a friend with one of these, just use their DVD, and, you can buy a product key at MSFT's online shop. Once again installation is trivial with Parallels10 - but ya gotta get the DVD.

Cant install windows ultimate 32 bit on my imac.

i cant install windows 7 ultimate on my imac every time i gets to the part wherr you shall pick the boot camp it says that i should put a cd with a driver in it put the windows cd wont get out.

Hi Andreas,
Please specify your hardware and software. Running OSX? Which version? Old hardware/new hardware?
It is not sure what your problem is: is it that the CD will not eject? Or is it that the winbdows cd is not installing?
Lex

How do I install Windows XP Pro OEM?

I have installed a legitimate copy of Windows XP Pro OEM I purchased from Ebay. (when i bought it i didnt know there was a difference i thought one was just mass produced and the other was retail pretty produced.)
So now windows xp is popping up with 'non-genuine' spam that it does and wont do any updates.
An IT friend of mine told me I could call Microsoft for registration and Activation and tell them that I changed the hardware, i havnt tried this yet.
My only reason for install xp is to play my old xp games, which by the way, are running really poorly and choppy (Simcity 4 Deluxe), but im guessing its because Windows isnt updated. Anyone else experience poor performance for games running in XP?
Any suggestions?

Spam is email. Using OEM isn't spam.
OEM or System Builder are totally fine and activate, the fact that it won't tells or suggests to me that your ebay skirted and is selling something else.
Buy from Newegg or Amazon. Or find a legit seller. The seller might spam you though and get into a less than polite discourse for leaving some helpful accurate feedback that they sold something that was not legit - but give them a chance I guess to prove they are going to stand behind it.
OEM copies can't be transferred to a new motherboard, sorry. That too is a good reason to buy retail. OEM can be installed multiple times, to the same motherboard only.

How do I install Windows with my OEM disc?

So I bought the Windows 8.1 64-bit OEM installation disc, and was using BCA (Boot Camp Assistant) to install it on my Late 2012 Mac mini.
I did as I was prompted: plugged in an 8GB USB drive, inserted my disc into my external reader, opened BCA, checked the the all the boxes as per recommended than clicked Continue.
I was than brought to the part where I had to 'choose the ISO file'. I thought it would have automatically detected my disc, but since that wasn't the case, I proceeded to browse my disc to search for the ISO file. And there was none.
I even thought that using the OEM disc to install Windows using BCA was wrong, but it is actually recommended over the Retail one.
Can anyone help me in this?
PS: Please forgive my bad English.

You will need to convert the DVD to an ISO using Disk Utility. Please see Disk Utility 12.x: Create a disk image and Section Create a disk image from a disk or folder
From Boot Camp: System requirements for Microsoft Windows operating systems
An authentic Microsoft Windows full install disc or ISO file
You may not be able to use an OEM disk.

I want to get a cd to install windows 7 ultimate 32bit oem hp in vietnam?

Similar Messages

Maybe you are looking for