I want to get a jerky or drop-framed look to a clip

Is there a more elegant way than just snipping out frames?

Effects -> Video Filters -> Video -> Strobe

Similar Messages

Want to get my new HP-ENVY-k073 Back to Clean PC State

I don't like Windows, except for Win2kPro, and the more they change it, the less I like it. When I first got this laptop, which is last week, it drove me crazy with the rapid shifts from one view to another, and it is a hard drive hog, so I decided to replace it with Ubuntu 14.04, which being a variation on Linux, is completely free. I use it sucessfully on my older but less capable laptop and desktop. So I booted from an external usb DVD/CD drive to a LiveCD (actually a LiveDVD) image I had downloaded and burned to a DVD, and got Ubuntu installed in place of Windows 8.1. I was able to boot up and run Ubuntu fine. But then I needed to copy a usb HDD drive's contents to the new laptop's HDD so as to free up the usb HDD to allow me to reformat it as an ext4 drive, and replace the corrupted NTFS file system on it. The only tool that would tackle the NTFS drive was chkdsk.exe, and I had to run that off my wife's laptop with Win7 on it. Win8.1 proved too difficult to work with, which is why I gave up on trying to run chkdsk.exe from it when I first got the new laptop. Chkdsk.exe "fixed" some file and folder issues, but finally failed when it ran out of clusters to remap the drive's contents to. At least it appeared to give me back access to the dtored folders and files there, but appearances can be misleading. There was a lot of cross-threading there that spoiled things going forward. So, using a terminal in Ubuntu on the new laptop, I made some command line entries: mkdir ~/tmpdrive: sudo cp -rfp /media/oldefoxx/My\ Passport/* ~/tmpdrive/ The My\ Passport drive had already been mounted by clicking on it under Places in the GUI. So it started copying all the folders and files from the "My Passport" (usb HDD ) to the new /home/oldefoxx/tmpdrive folder, a process that would take hours. So I set it aside and went on to other things with my older laptop. And then I slept. The sudo statement? Gave me super-user powers for that one command. Dealt with any folders and files that I, oldefoxx, might not have access to otherwise. The cp command? Unix shorthand for the word "copy". I could have used mv ("move") in its place, but I allow for human error and leave the original in its place for later efforts in case something goes wrong. The -rfp flags on the cp command? r means reiterate (repeat) for each subfolder and file found within. f means force the replacement of any filder or file that has the same name on the destination end. p means preserve the owner/group/user flagged bits associated with the different folders and files being dealt with. Otherwise, everything gets reflagged as being "root" (what my temporary super-user status marks me as). On reviving the darkened screen (happens after a certain timeout period), I was unpleasently surprized to see I had completely run out of hard drive space on my new laptop, so the copy over was incomplete. Run out of hard drive space? No way!. I had a bit over 620GB of contents on that usb HDD, and way more than that on my new laptop! What went wrong? Two things: (1) Unfortunately, instead of just manually deleting and recreating my new ext4 and swap partitions, I had left it to the installer to do it for me, and with Ubuntu 14.04, it now recommends using a LV approach, which is suppose to simplify future partitions moves and relocations. So I allowed this, and that made the new format more bulky than I had allowed for. I won't make that mistake again. (2) The real space eater though turned out to be that chkdsk.exe had cross-threaded files and folders among each other, so that both folders and files were showing up all over the map of the usb HDD drive. The total apparent drive space required to hold all these as separate entities must have been not only gigantic (multi-Gs) but possibly tremendous (into the T's). No wonder I had not only run out of destination drive space, but had reaced zero bytes left. I had access to Ubuntu's GUI still, but with no drive space left, there was nothing I could do. To see if it would help, I decided to first do a reboot. Ubuntu came up, but gave me no login screen. So I decided to reboot to a LiveCD. But that didn't work, because the LiveCD has to build some temporary map structures somewhere, and apparently instead of using a temporary RAM (Random Access Memory) structure in memory, it must go to the internal hard drive, which at this point is so full that it won't permit this. So the LiveCD approach failed. I decided to just try and recover part of what I had had already copied over later, and just go ahead and wipe the My Passport drive of its contents and use my older laptop to run LiveCD and install Ubuntu to it, along with a complete reformat of the drive as ext4. I did that, but this effort was flawed in two respects: (1) I got the install done okay, but the install made the usb HDD the primary boot drive for GRUB2, while GRUB2 did not allow for the fact that a usb HDD is non-permanent. My old laptop lost the ability to boot when the usb HDD drive was not connected, and the usb HDD drive did not have GROB2 on it to serve as a stand-alone bootable device. I had to use two new sets of terminal commands to take carfe of this. With the usb HDD drive attached, I booted up on my old laptop,and did this in the terminal window: sudo grub-install /dev/sda sudo update-grub sudo grub-install /dev/sdb sudo update-grub That took care of it. With or without my usb HDD being attached to my old laptop, it is now bootable. the /dev/sda is how my first internal hard drive is identified. Since I only have one internal drive, my usb HDD drive becomes the next lettered drive, or /dev/sdb. Haf I two internal drives, it would be /dev/sdc, and so on. In Unix and Linux, drives are treated as folders under the /dev folder (dev being shorthand for devices). When a user mounts a device, it is added to the mounted devices list kept under /media/[username] folder. When a user is created, they get a new folder under /home and a new one under /media (in earlier times, they used /mnt instead of /media, and mnt stands for mount). There is a file named /etc/fstab that identifies what devices are mounted sutomatically whenever the system boots up.As super-user, you can make changes to this table file, but screw up, and you can make your system unbootable. All this seems aside from the point of this post. At some point, my new HP ENVY 17-k073 became unbootable. I can't get to it any more, though I;ve tried F9 (select boot device), F10 *BIOS Setup), ESC, and every other function key to try and make progress. EXC brings up a mini-grub, but I don;t know how to use it. I can type in help but the list seems endless, and I can't see most od it before it goes off screen. Working with the part I can see, I can see what a few commands say, but in most cases I don;t have enough insight to know what parameter(s) to supply. It does tell me that hd0 (hdo,msdos) has errors, but so apparently do the internal and usb CD drives. If I want to do a boot, I have to load the kernel first, but it doesn't tell me how to load the kernel. There is a lot I am missing here, and this might be the one tool at my disposal to deal with it, and I don't know how. Under F9, of devices I can pick from, is listed my old My Passport designation, but that's no longer available. I see no way to add usb-ext4 as a choice to this brief list. None of the choices shown are bringing my new laptop to life again. The one I really haven't explored at length involves the internal CD-ROM drive, for two reasons: (1) It is extremely difficult to get the drive tray to extend. Probably the flimiest thing on this Laptop, aside from getting the battery pack to properly latch in and not drop out. (2) When I could get the tray to extend and put a LiveCD in it, the PC refused to boot from it. I' can use this LiveCD elsewhere and it does it's thing, but on this laptop, it won't. I've tried other LiveCDs with no better success. But it did finally read from the usb DVD/CD RW frive for my initial install of Ubuntu. I wonder id I have a bad DVD/CD RW drive in this thing? What can I do about that? I've only had this HP EMVY 17-K073 drive three days now, taking delivery on this last Thursday, and it is now only Sunday. Anyway, I'm in a tight spot here, and want to get back to one of a few possible states here. The first one is my first choice: (1) Be able to boot from my usb-connected usb-ext4 HDD so that I can recover my transferred folders and files from the crammed-full 17-K073 drive first. (2) Be able to reboot from my externally-connected DVD/CD RW drive so that I can reattempt a complete reinstall of Ubuntu, even though this means losing my hord of stored folders and files in the process. (3)

I appreciate the thought. But as you say, that means getting into the guts of the laptop, and that should not be necessary. No, the real trick is to get the PC back into boot form somehow. I spent quite a bit of time on a support chat session last night, and though reluctant to help me at first (I had wiped out Windows 8.1, and they were disinclined to deal with a 3rd party OS), I convenced them it was now a hardware issue. That is, how to get the PD to recognize one of three boot sources if it was not going to boot up to the internal hard drive. It had to be something related to using F9 and/or F10 function keys. So we went through some of the functions of the function keys during the black screen phase of the boot process. I found out that F1 gives you information about this particular laptop, including the derial number, that F2 allows me to test memory, check the hard drive, or pick a different language. F9 lets you select a specific device to use during bootup. The oriblem was, F9 was showing the usb hdd selection as being specific to my wd (Western Digital) My Passport 0748 drive, and it now had a different name and assigned UUID due to having been reformatted from NTFS to ext4. I had to get rid of that specific drive reference, and F9 gave me no way to do it. It had to be somewhere in the Systems Settings, which are accessed via the F10 key. But I had already looked at the boot device order in the Systems Settings, and it was okay, and tried both with and without the legacy boot option. Still no go. Support gave me a few more ideas to try, but it was real late, I was tired, so I elected just to use F3 and text the built-in SSHD during my rest period (SSHD stands for Solid State Hard Drive, which is an excellent feature of this laptop, as mechanical hard drives wear out and develop problems over time). So when I woke up today, I hoped the changes made earlier would help. They didn't. I turned Legacy support back on, and tried to get the LiveCD to load properly from thr internal DVD/CD drive. This time it worked. I'm up running on the LiveCD, and tried an install, but somehow that got hung, so I just rebooted back to the LiveCD and went into Try mode, which is much like the real thing, but mostly isolated from the existing hard drives. I had to figure out how to look for any existing files on my internal HDD so that I could copy them back to the reformatted My Passport drive, now renamed usb-ext4. The search for existing hard drives under Ubuntu begins under /dev, but the LiveCD treats the devices there somewhat differently than normal. It adds a subfolder /mapper in which it keeps files that somehow manage the process, and I don;t have a clue as to how to use those files myself. But I know Ubuntu well enough to know that there is a folder named /media under which a logged in user appears by name, and when I checked with a "dir /media/" command, the LiveCd had me down as being "ubuntu". That was my username when using the LiveCD. When I did a "dir /media/ubuntu/", I saw four listings. Two were HDDs that were being identified via their UUIDs, so had about 16 mixed characters that uniquely identify each. And I had cdrom and usr-ext4. I did a change directory to the first long UUID name by typing in "cd /media/ubuntu/" then doing a screen copy-and-paste to put one of the UUIDs after the last slash ("/"). In terminal mode, copy-and-paste are slightly different than found in similar operations else where. First, what gets copued has to be highlighted with the mouse and left button held down. When you have the exact area you want to go to the clipboard highlighted, you hold down the Ctrl+Shft keys together and press the "C" key. Now it is in the clipboard. Then you use Ctrl+Shft again and press the "V" key. The copied text in the clipboard is then copied to the place on the command line where the cursor sits. Press Enter, and you have changed directories to that point. A '"dir" commanf now shows you the contents of the root folder on that drive. The contents of the first drive were not what I needed, so I repeated this process to get to the root of the 2nd HDD. This had the recognizable folders for Ubuntu in it, so this was the drive I had installed Ubuntu to, and I then used a repeat of the "dir" and "cd" commands ro walk up the home > username > foldersought > folderfilestore, where rhe username, foldersought, filderfilestore are simply representing the actual names used. When I got to folderfilestore, I was refused oermisson to enter. This happened in the GUI as well. Well, where the users may be balked, root or super-user have no problem. LiveCD does not permit you to log in as root, but in Terminal mode, you can become super-user by typing in :sudo -s" or "sudo su" and pressing Enter. From the LiveCD, you don;t even have to enter a password. I mean you are just there. To avoid further folder and file disputes over priveleges, I used the following command: "chown -R nobody:nogroup " and stuck the name of the folderfile store on the end. In a few moments, that folder and everything it contained had all priveleges revoked. Now I could selectively go through this folder from the GUI and eliminate needless or unwanted folders and files, while merging the remaining on the separate storage partition I had previously formatted on the externally connected HDD that had been My Passport. Why am I going into such detail? Because this is what you can do with a LiveCD of any distro of Linux, and you can do it all with free software that you download off the internet. I just prefer Ubuntu, because it is widely supported and most like Windows in terms of its Gnome or KDE GUIs. That means less relearning. Anf the magic that Linux is, is (1) Better, faster, smaller than Windows, (2) Completely free, (3) able to work with Microsoft volume and file formats so you don't lose everything you already have, and (4) Even run some MSDOS and Windows programs via an add-in named Wine, which is also free. You can get recovery disks for Windows, but I find having a LiveCD another effective way to deal with lots of problems. Like now, I am using it to work around a crammed hard drive problem so that I can reformat the internal drive, reinstall Ubuntu from the same LiveCD, and keep on going. I can reinstall from a Live CD without disturbing my existing account or the files already there. Or I can take over the whole drive and erase everything on it. Or I can install Ubuntu along side the existing operating system (no me though. I have no use or regard for any Windows version pass XP). Or you can install Ubuntu to run as a client of Windows (some like it this way). Or you can install a VM in your existing OS and install Ubuntu in a Virtual Machine client, which isolates it pretty well from the external world. To a lot of people, Windows is it. You need go no further, except to buy the next major release coming out of Microsoft. The biggest part of MS' profits is not enhancing existing Windows, but coming up with something a bit newer, better, or offering more features than is already on the streeets in the form of an earlier version of windows. That is profiting off ofr having created a large worldwide dependency on Windows, and just catering to people's desire to do more and more things, like fingerprint recognition, touchscreen, webcam, and playing DVDs on your PC instead of via a player attached to your TV. You can even attach your PC to the TV via a an HDML port to turn your PC into a media center. I mean this is all do-able, but why would you want to? What you are really buying into is the idea that the PC can do anything, but it takes Windows to make it happen. So you have to buy newer, faster, bigger PCs as Windows gets bigger, more bloated, and more demanding on storage space and required memory. If I buy a PC, (and this new laptop qualifies), I don't pay attention to whether it comes with Eindows 7 Pro, Windows 8, 8,2, or 8.3. I'm going to trash all that anyway. And MS' enticement, that I can have a free upgrade to Windows 10 is not something I need to hear. The ubuntu (and other Linux distros) community is worldwide and people help each other through forums. Support for Windows is not so lavished, and while some of it is free to visit and download from, you find that technical support is of the pay-extra kind or of the as covered by the warrantee nature. I won't close this thread yet. I'm at the start of a lengthy copy-reformat-reinstall-recopy effort, and just because I can boot up from a LiveCD and do some of it does not mean that I will find the PC able to boot from the internal drive when the reinstall is complete. Until then, it is a play it by ear effort still.

I just got a new phone today the iphone 5c and i plugged it into itunes. i wanted to get all of my data from my iphone 4s but when i synced my phone all of my iphone 3 data was on my new phone how do i get my iphone 4 data on my new phone?

I just got a new phone today the iphone 5c and i plugged it into itunes. i wanted to get all of my data from my iphone 4s but when i synced my phone all of my iphone 3 data was on my new phone how do i get my iphone 4 data on my new phone?

Did you choose the wrong back up? There should be a drop box when you go to "Restore from Back up" in iTunes and your iPhone is plugged in, on the Summary page. Choose the correct back up. If you can't find one, and you still have your device, back up your iPhone 4 again and then choose that back up. Or check for an old iCloud back up if you have one.

I have an open case. I can't get a response from Adobe. My computer was hit by lightening and cannot be repaired. It had Photoshop on it. I want to get a copy of Photoshop for my new computer using the serial

My computer that had Adobe Photoshop CS6 on it was hit by lightening and cannot be repaired. I want to get a copy of Photoshop for my new computer. I have an open case, but I cannot get Adobe to respond to it. I have sent the serial# and a copy of the license. Every time I try the chat function to get help, I get dropped with the message "chat is no longer available." I WANT MY PHOTOSHOP!

This is a user forum, not a channel to address Adobe. As your fellow users and volunteers, we'll be happy to help you if we can.
You can download the CS6 trial version just like anybody else.
Once you download it, you can install it, input your serial number, register it and apply all necessary updates.
An alternative, if you know how to access your Adobe account, under My Products you'll find your Photoshop CS6 registration, next to which you should find a link to download CS6 if you originally bought it as a download

I want to get and set windows system time through lab view

Hi
I want to get and set windows system time with the help of lab view 8.5.
please help me out.
ekanth

You can use the call library function node. Once you drop it on your block diagram double click it and you will be able to select the dllyou want to use. Choose kernel32.dll and you will see methods listed called getsystemtime and setsystemtime. Use those
CLA, LabVIEW Versions 2010-2013

HEEEELP! I want to get English SR onto my PowerBook...

I want to get English SR from Older Software downloads (on floppies) to an old PowerBook 5300c. I don't want to strip the resource forks on the mac (I learned my lesson last time :p), so I am formatting floppies for Mac OS Standard, right. Then I end up only having 1.1 MB avalible on disk, and I need 1.4 MB pleeeeese help

Those diskettes actually hold 1.4 MB, if they fully formatted and do not have Bad Blocks. Mac OS X puts its invisible .DS_Store file on there, which makes it seem like you have only 1.1 or 1.2 useable. If you drag and drop the files with the Finder, you are stuck with that restriction.
If you use the procedure Niel suggested, using DiskCopy 6 under Classic or OS 9, it will erase the disk and copy the image onto the diskette sector-by-sector. As long as there are no bad blocks or other problems, a 1.3 MB DiskCopy image should fit just fine.

I currently have the Mac OS X v10.5.8 and want to get the new operating system but I don't know how to do it. I don't have the Mac App Store and can't get it because of my version. What do I do?

I currently have the Mac OS X v10.5.8 and want to get the new operating system but I don't know how to do it. I don't have the Mac App Store and can't get it because of my version. What do I do?

The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard. The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion. The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion.
To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.
The Snow Leopard 10.6 DVD should still be available from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list.
If they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0
Once you are at 10.6.8 Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store. The price is still $29. You must have at least a model 2,1 MacBook.
Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

Get rid of URL drop downs: Apple, Google, etc?

Safari under Yosemite includes a drop down listing Apple, Google, under the URL as soon as I touch it. I want to get rid of that. When I type an address I don't need a bunch of icons cluttering things up.

Type the address into the address box:

I water damaged my iPhone and want to get my photos back. My iPhone was ios7 but my icloud synced to my work ipad on ios8. Is it now impossible to view any data from ios7 on icloud drive? Any help to get my photos back please!

I damaged my iphone 5s and want to get my photos back. It was submerged in water for a good five minutes (and is now in rice) but I'm pretty sure it's dead.
I really would like to get my photos back. I wasn't plugging in my iphone and backing up, I just assumed it did it automatically because about a week ago I had a message saying automatic backups were stopping as my icloud was full.
My work ipad is running on ios8 (as of a few days ago!) but my iphone was on ios7 as I didnt have enough space to install the update. This means that my icloud is now icloud drive and I cannot view the stuff from my ios7 device without upgrading it to ios8. Trouble is, I cant upgrade it because it's in a rice bowl.
Any help would be greatly appreciated! Any idea if I will be able to access my photos on icloud at all? I'm not very hopeful for my phone working again and downloading things that way!
Thanks!

Photos that are in the cloud stay there until they are removed by a device that has the right privileges. If your iPad is logged in with the same AppleID, then doesn't it show the photos from iCloud?
You will only be on iCloud Drive if you expressly chose to upgrade.

I want to get NEW_PAGE after 5th SY-TABIX in Smartform.

Hi Experts,
I've created Two Tables into a Folder in Single Main Window but I when execute smartform i'm getting Second Table after Finishing First Table..but i want to Get Second Table after end of 5th SY-TABIX of First Table. and NEW-PAGE should Trigger after 5th SY-TABIX of second Table.
Ao please tell proper command and where to give that command and how to write code for calling NEW-PAGE.
Pankaj.
Edited by: PANKAJ CHIRMADE on Feb 28, 2009 9:58 AM

hi
as u create table line for ist table u can create command on this line. just right click on the table line which u created.
goto create->flowlogic->command.
when u create it then in CONDITIONS tab which is near the GENERAL ATTRIBUTES tab, put ur condition as
in field name give SY-TABIX and in comparison value give '5' note that comparison valu should be in commas
and in GENERAL ATTRIBUTES tab , check the field Go to New Page

If i reset my ipad can i install paye games for free if i sign back into my apple ID. Please i need help because i need to update my games but i need to put in this billing thing and i want to get rid of it so then i cant buy games with my credit card

If i reset my ipad can i install paye games for free if i sign back into my apple ID. Please i need help because i need to update my games but i need to put in this billing thing and i want to get rid of it so then i cant buy games with my credit card

Hello,
As frustrating as it seems, your best to post any frustrations about the iPhone in the iPhone discussion here:
https://discussions.apple.com/community/iphone/using_iphone
As this discussion is for iBook laptops.
Best of Luck.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

I want to get the values from the second hiphen only

Hey Guys,
I have one column and the data like this
col1 = 'AI463-901-001'
Now,
I want to get the values from the second hiphen only(any no. of values).
Please can any one help me on this .
Thanks in advance!
Regards,
-LK

you have a mistake
you result is -001
this is right
select substr('AI463-901-001',instr('AI463-901-001','-',1,2)+1) from dual;
-- @user11928732 - if you are using Oracle Database 11g, ttry this please
with data as
(select 'AI463-901-001'from dual)
select substr(str,instr(str,'-',1,2)+1) from data;
select substr(<YOUR COLUMN>,instr(<YOUR COLUMN>,'-',1,2)+1) from <YOUR TABLE>;result is : 001
Edited by: Mahir M. Quluzade on May 3, 2011 5:37 PM

I'm having trouble loading photos on my I phone 4s and I pod. I don't see the photos tab in Itunes?? Prob user error but wanted to get some help.

I'm having trouble loading photos on my I phone 4s and I pod. I don't see the photos tab in I-tunes? I'm sure its user error but wanted to get some help.

What's the origin of this external drive? It sounds very much like it's a Windows-formatted (NTFS) drive which Macs can't write to. If you can, copy the files off the drive, reformat it as Mac format (using Disk Utility) and copy the files back. If you need to continue writing to it from a Windows PC, you should format it ExFAT in Disk Utility.
Matt

Help my iPod won't let me download apps... I'll put my password in then it takes me to the app but then is just goes away then I do it again an it won't load or it will just go away again plz help I want to get apps

Help my iPod won't let me download apps... I'll put my password in then it takes me to the app but then is just goes away then I do it again an it won't load or it will just go away again plz help I want to get apps

You said you updated yur 1G iPod to 4.2.1. A 1G can only go to 3.1.3 and thus you must have jailbroken it to get to 4.2.1 and that can cause problems.
ArealDJ wrote:
I have the same problem.. apps won't download and won't open. I have a 1st Gen ipod touch and recently upgraded my MacBook Pro (2012) and as soon as I upgraded the iPod Touch to 4.2.1, this happened. I restored to factory defaults and still cannot dl and open apps. Any way to diagnose this problem? Apple tech charges $29.99 for out of warranty products and if I am reluctant to pay with them telling me its simply a hardware problem.

I want to get a jerky or drop-framed look to a clip

Similar Messages

Maybe you are looking for