I want to get a line before the label

Hi all,
I had a req where i need to display a line which is iin blue colour before thye label.
Like divider.
But i am not able to find any property to get this?
Can any one help me in this regard.
Thanks & Regards,
Lokesh

Hi Lokesh,
I had a req where i need to display a line which is iin blue colour before thye label.
As per requirment place the UI inside the two transperent container and set the cellBackGroundDesign property of the Outer container as Fill1 and bottompadding as 1px. and inside container's cellBackGroundDesign as plain.
By doing this you can achive this.
Hope that may help you.
Regards,
Deepak
Edited by: Deepak Arora on Jun 23, 2008 1:27 PM

Similar Messages

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

The battery for my macbook pro 13 says "service battery". Now I want to get a replacement but the reviews for it are horrible! Does anybody have any suggestions?

The battery for my macbook pro 13 says "service battery". Now I want to get a replacement but the reviews for it are horrible! Does anybody have any suggestions? I don't want to spend 130 dollars on something I'm going to have to replace in less than a year (which is what normally I been reading) I do design work and I take my mac everywhere. Having to always look for a plug or having to be constantly plugged in doesn't sound ideal to me. Please help me. what should I do???

Why does it matter if it a scam????? I'll let you figure that out by yourself. If I'm going to replace it, why should I be contempt with a battery that I have to replace within months (as stated by some people in the comments). The issue here is not if I should or not replace it OBVIOUSLY I'm going to have to before it starts going crazy. The underlying issue is why is the replacement battery for a lack of better words " a bit crap." It comes with a 3 month guarantee?? Is that a joke?!??!?! Some people complained it malfunction after only 8- 9 months? I'm sorry but as an Apple fan I think it's absolutely rubbish. I know there is no magic cure I'm just hoping someone shines the light on how crappy this replacement is.

On slide No. 13 of my Keynote presentation, I have varous pictures that go through automatically just as I programmed them, but if I I want to get by clicking to the next slide , it does not let me. How can I program so when I want goes to next slide?

On slide No. 13 of my Keynote presentation, I have varous pictures that go through automatically just as I programmed them, but if I I want to get by clicking to the next slide , it does not let me. How can I program so when I want goes to next slide?

Keynote is programmed to execute all of the effects in a build sequence before it will move to the next slide.
If you want tobe able to move to the next slide at any time in a sequence of builds, you will need to set all of the builds on that slide to: "on click". You will then need to execute each build by pressing the space bar or click the left mouse button for each object.

My iTunes says I owe $5.25 for songs that I have already paid for and am not going to pay for again but I want to get some apps from the store and now there's a hold on my account. Who do I talk to get the hold taken off

I explained it most in my question but I am getting charged double for songs that I have already paid for and am not going to pay for twice because that is messed up. But I want to get some apps from the store and it wont let me because of $5.25. Who can I talk to about resolving this issue?

You're right, it would have been covered under warranty. But because of the user damage, chances are there's a 200-something dollar fee . If you explain to them that it had a defect previously, they might replace it for you at no charge. **MIGHT**. But they would have to believe that it had a defect previously.

I have changed operator and also changed IOS and did a back up of my old phone in Itunes so i would keep all my contacts etc. Now when i want to get everything back in the phone, Itunes asks me for a password, which i do not have. How to bypass this?

I have changed operator and also changed IOS and did a back up of my old phone in Itunes so i would keep all my contacts etc. Now when i want to get everything back in the phone, Itunes asks me for a password, which i do not have since i did not enter any password when i did the back up. Is there any way I can bypass this password request? Otherwise i have lost all my contacts etc.
Greatful for help.

Contacts are designed to be synced to a supported application on the computer or a cloud service like Gmail, iCloud, or an Exchange server.
Have you failed to use the device as designed?

HT1296 I HAVE A TOUCH 4.3. MY COMPUYET DIED AND NOW HAVE A NEW LAP TOP. I HAD SYNCED PHOTOS FORM THE COMPUTER IN THE TOUCH THAT APPEAR IN FOLDERS. THEY WERE NOT TAKEN WITH THE TOUCH. NOW HAVE A NEW COMPUTER AND WANT TO GET THESE PHOTOS FROM THE IPOD TO NE

I HAVE A TOUCH 4.3. MY COMPUTER DIED AND NOW HAVE A NEW LAP TOP. I HAD SYNCED PHOTOS FROM THE COMPUTER TO THE TOUCH THAT APPEAR IN FOLDERS. THEY WERE NOT ORIGINALLY TAKEN WITH THE TOUCH. NOW HAVE A NEW COMPUTER AND WANT TO GET THESE PHOTOS FROM THE IPOD TO NEW PC OTHERWISE ARE LOST. MY LAPTOP IN WINDOWS 7

To get synced photos from an iPod to a computer you need a third-party program like TouchCopy or PhoneView.

I wanted to get this app from the app store but it wouldn't load the app after typing it in the search box

Hey apple or who ever is going to answer the question I'm about to give,
Anyway, my question Why isn't my app store working? Is there a glitch in the IOS 7 or something. But let me get into further detail about my situation. I wanted to get this app from the app store. When I click on the app everything is fine at first, but then i click on the "search button" and I type out the name of the app.And usually the name of the app would pop up to what it appears be a list of the names of each app, but that never happened. Then, I clicked "enter" or "search" and it wouldn't load after hours and hours. And then I decided to go to the settings and see whats up with the app. I scoll down and click on the "ITunes & App Store" with an arrow pointing right. Once I clicked it, it freezes. But I haven't updated my phone (its IOS 7 but theres an update for IOS 7.1 or something like that)
Regards,
Veronica M.

Veronica ...
Reset the device then try the App Store.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.
When you can, yes, there's an update available.
Tap Settings > General > Software Update

My computer has a 1.3 GHz. I want to get a game but the minimum requirement is 1.4 GHz. Can I still play this game without problems.

My computer has a 1.3 GHz. I want to get a game but the minimum requirment is 1.4 GHz. Can I still get this game and play it without any problems that will prohibit me from being able to play it. I would also like to get a game that has a 1.7 GHz requirment and be able to get this game and play it without any problems that will prohibit me from being able to play it.

What do you expect us (Apple users) to tell you? Especially since you are not telling us which specific MacBook Air you have - as some of the recent ones have TurboBoost.
But even putting that aside, if the game maker takes the time and trouble to tell you a required speed, and you do not meet that speed, then obviously you should expect the game to function less than perfectly. If you are considering a 1.7GHz required game on a machine with 65% of that performance, you should feel lucky if the game runs at all, even with miserable performance.
The game maker took the trouble to lay out the specs. If you don't meet them, expect inferior, if any, performance.

ITunes began downloading a file I didn't order and don't want. I stopped it before the download was complete. What do I do now?

iTunes began downloading a file I didn't order and don't want. I stopped it before the download was complete. What do I do now?

Download past purchases - Apple Support
I wold try to connect in a different WiFi setting

I controled voltage output by vertical pointer slide In my vi.Now,I try tocontrol it by a series accurate values. I want to get output according to the array's value.

I controled voltage output by vertical pointer slide In my vi.Now,I try to
control it by a series accurate values. I want to get output according to
the array's value.
Attachments:
input+output.vi ‏51 KB

Yun,
Here's a simple example I wrote that does what you are trying to do. You can wire an array into an Analog Out 1D DBL 1 chan N Samples. Then I wired the size of the array into the number of samples per channel on the timing vi.
Regards,
Danny F
Danny Funk -- Staff Product Support Engineer -- InsightCM R&D -- National Instruments
Attachments:
AnalogOut Array.vi ‏20 KB

I can't get on line when the message "Blocked plug-in" appears.

I can't get on-line when the message "Blocked plug-in" appears. How do I get rid of this?

If you actually can get online on some websites in Safari, but are unable to view the websites that depend upon the use of Adobe Flash Player, such as YouTube, then the problem is an outdated Adobe Flash Player version, and you need to update it.
, System Preferences, Other, Flash Player, Advanced, Updates, Check Now
(This screen shot is from OS X 10.8.5, so it might appear different than your OS X 10.6.8 screen, and a different release of the Flash Plugin might be installed.)

I want to get rid of all the songs off my iPod....

i want to get rid of all the songs off my iPod but when i press un-sync library, there is about 60 song that won't be erased. i've tried manually erasing them too and it won't earse them. how can i fix this? thankyou

Backup and then restore.
tt2

TS3989 My iphone was stolen and I want to get my pictures from the device back.

My iphone was stolen and I want to get my pictures from the device back. I have iCloud but when i logged into it there was no icon for my pictures so I guess they are not on there for some reason. How can i get my photos back either on iCloud or wherever?

If your music and books all came from iTunes you can download it again without charge. If you had maintained an iCloud backup of your phone you can restore that backup and get all of your content back.

I disabled my iPod and it says connect to iTunes I tried that but it doesn't do anything and I want to get it back to the lock screen ??

I disabled my iPod and it says connect to iTunes I tried that but it doesn't do anything and I want to get it back to the lock screen ??

iOS: Forgotten passcode or device disabled after entering wrong ...

I want to get a line before the label

Similar Messages

Maybe you are looking for