I want to get an iPhone 5, should I get the white or black?

I want to get an iPhone 5, should I get the white or black? which is more popular? which one is better?
I personally prefer black but I've heard that it scratches easily, but I also like the white color. I need suggestions pls.

Faraz95 wrote:
when will it be released?
http://www.huffingtonpost.com/2013/04/15/most-expensive-iphone-5-black-diamond_n _3085708.html

Similar Messages

I want to get the iphone 5s the day it comes out. Do you think the best way is to go to the apple store or wait at Verizon. I know when the iphone 5 came out here that they sold out at Verizon. The closest apple store is an hour away.

I want to get the new iPhone 5s right when it comes out. I was just wondering what you guys thought. Should I go to the apple store (closet one is an hour away and always busy) or should I go to my local Verizon store. I know when the 5 came out last year they ran out of the iPhone 5. What do you think my best bet will be??

There's really no way anyone can even guess, since we have no idea what sort of stock will be available and how Apple will distribute it. It's not impossible that your local Verizon store will not have any units at all on the first day, or they could have a quantify. We just can't know. If your Verizon store can't give you some idea, you'll just have to make your best guess. Note that people are already lining up at Apple Stores in at least a couple of cities according to reports, and started doing so earlier this week.
http://news.cnet.com/8301-17938_105-57601882-1/lines-forming-at-apple-stores-in- advance-of-iphone-launch/
Regards.

I did a backup from my 3G and want to get the backup now on my iPhone 4, but the backup from the old 3G is not shown as an option to configurate. How do I get the information on my new phone?

I did a backup from my 3G and want to get the backup now on my iPhone 4, but the backup from the old 3G is not shown as an option to configurate. How do I get the information on my new phone?

First, back up your old iphone manually:
Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your phone without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your old phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the phone for the first time.
About backups and what's saved: http://support.apple.com/kb/HT1766
How to back up and restore: http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
After that, connect your new phone and let iTunes set it up. iTunes will detect the old 3G backup and ask you, if you want to use it to restore the info on your new iphone. If you agree, all settings and data will be present after the process is finished.
This is also explained in this article: http://support.apple.com/kb/HT4137

HT4859 And what if my brother backs up in icloude but all his clander has been deleted and wants to get the event in the calender back , what should he do ?

And what if my brother backs up in icloude but all his clander has been deleted and wants to get the event in the calender back , what should he do ?

Assuming he has a backup that includes the data that has been deleted, then we should use that backup to restore his device.

And what if my brother backs up in icloude but all his clander has been deleted and wants to get the event in the calender back , what should he do ?

And what if my brother backs up in icloude but all his clander has been deleted and wants to get the event in the calender back , what should he do ?

Assuming he has a backup that includes the data that has been deleted, then we should use that backup to restore his device.

IPhone contacts: file transfer to Windows 7 via USB-cable My iPhone can communicate with the computer only via USB-cable (no mobile data, no bluetooth, no internet, no outlook). As I want to get the phone to the "doctor" I want to save specifically

iPhone contacts: file transfer to Windows 7 via USB-cable
My iPhone can communicate with the computer only via USB-cable (no mobile data, no bluetooth, no internet, no outlook). As I want to get the phone to the "doctor" I want to save specifically my contact data and calendar details on the computer (OS: Windows 7). How can I solve this task? I will appreciate your valuable information, thanks.

Using the iPhone, the USB cable, iTunes and Windows Contacts, sync the iPhone contacts to Windows Contacts. That will save them there. They are also included in the iPhone backup made in iTunes, and if you use iCloud.
I'm sorry, I missed the calendar part the first time I looked. For calendar, you need a supported application on the computer (Outlook) or if you use iCloud, you can use the iCloud contacts and calendar app to sync.

If i have a upgrade and want to get the iphone 5s do i have to pay full retill or can i do the down payment

if i have a upgrade and want to get the iphone 5s but have tmobile do i have pay full retill or can i do the down payment

Yes. You can also check from the apple store app.
Going in store is a great idea.

I currently have the Mac OS X v10.5.8 and want to get the new operating system but I don't know how to do it. I don't have the Mac App Store and can't get it because of my version. What do I do?

I currently have the Mac OS X v10.5.8 and want to get the new operating system but I don't know how to do it. I don't have the Mac App Store and can't get it because of my version. What do I do?

The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard. The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion. The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion.
To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.
The Snow Leopard 10.6 DVD should still be available from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list.
If they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0
Once you are at 10.6.8 Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store. The price is still $29. You must have at least a model 2,1 MacBook.
Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

I want to get the values from the second hiphen only

Hey Guys,
I have one column and the data like this
col1 = 'AI463-901-001'
Now,
I want to get the values from the second hiphen only(any no. of values).
Please can any one help me on this .
Thanks in advance!
Regards,
-LK

you have a mistake
you result is -001
this is right
select substr('AI463-901-001',instr('AI463-901-001','-',1,2)+1) from dual;
-- @user11928732 - if you are using Oracle Database 11g, ttry this please
with data as
(select 'AI463-901-001'from dual)
select substr(str,instr(str,'-',1,2)+1) from data;
select substr(<YOUR COLUMN>,instr(<YOUR COLUMN>,'-',1,2)+1) from <YOUR TABLE>;result is : 001
Edited by: Mahir M. Quluzade on May 3, 2011 5:37 PM

HT1848 how do i transfer my music on my ipad to a new computer that i recently downloaded itunes to and authorized? My last computer crashed and all my music is on my ipad and i want to get the music off my ipad and on my new computer.

how do i transfer my music on my ipad to a new computer that i recently downloaded itunes to and authorized? My last computer crashed and all my music is on my ipad and i want to get the music off my ipad and on my new computer. somw music is purchased and some is just old transferred from cd's

Sync with new computer
http://discussions.apple.com/docs/DOC-3141

Need help in multisim 11? I want to get the transient response of RL circuit....

Need help in multisim 11?
I want to get the transient response of RL circuit....i can get the increasing exponential graph in multisim 7 during simulation.....but i am getting a decreasing exponential curve(i.e,decay response) in multisim 11 when i do the same procedure as i did in multisim 7.....how can i get the initial or growth transient response for RL circuit in multisim 11 so that i can get increasing exponential curve....which satisfies time constant = L/R

Hello,
The process is the same for any circuit (in this case it is an RC circuit which you sent me). You can find the response on the voltage (which I think it's what you're looking for) at any point of the circuit, as well as any parameter really (R,V,I,L..etc).
Please refer to the image attached (an analysis on the voltage at an inductor and the wires connected to it).
The way to set it up (once you're in the transient analysis set up) is, select the Output tab, under Variables in circuit, you can select which parameters to take. V(1) and V(2) refer to the voltage in the circuit at Net 1/2 (or wire 1/2).
This differs from the voltage change within the capacitor/inductor/resistor. If you would like to see the voltage change of an inductor/capacitor/resistor/etc, you can select under the More options box, the button Add device/model parameter, which will take you to a window to select the device type, its name (in the circuit) and the parameter which you wish to analyse. Once you click on Simulate, you can select Cursor >> Show Cursors, to view information for y and x axis (like rise time, decay time, voltage difference...etc)
Hope this helps,
Miguel V
National Instruments
Attachments:
untitled.jpg ‏178 KB

I want to get the data of a table inside the Form but it is not passed

I want to get the data of a table inside the Form but it is not passed to the form by tables parameters.
How can I do this.
Regards

If there is a problem with defining it globaly, you can define a field symbol globably and point to it. For example. It would probably be better to define your table globably.
report zrich_0003 .
field-symbols: <imarc> type marc_upl_tt.
start-of-selection.
perform get_data.
*       FORM get_data                                                 *
form get_data.
data: imarc type table of marc with header line.
select * from marc into table imarc up to 10 rows.
assign imarc[] to <imarc>.
perform write_data.
endform.
*       FORM write_data                                               *
form write_data.
data: xmarc type marc.
loop at <imarc> into xmarc.
    write: / xmarc-matnr, xmarc-werks.
endloop.
endform.
Regards,
Rich Heilman

I want to get the information of the attachment without get the whole body

POP3 server:
MimeMultipart mp=(MimeMultipart) message[0].getContent();
int count=mp.getCount();
//the server deliver the whole attachment when I use mp.getCount
Part part=mp.getBodyPart(0);
//when I use getBodyPart the server deliver the whole body too
I just want to get the information of the BodyPart,just like filename.
Some say FetchProfile can do it.But I try it failed.
How could I do this? Thank you!

Using POP3, you can't. It's a limitation of the protocol.

For some reason my google search bar which normally sits in the top right hand side of my screen has disappeared, but my normal search bar still remains. I want to get the google search bar back, but I'm not sure how

for some reason my google search bar which normally sits in the top right hand side of my screen has disappeared, but my normal search bar still remains. I want to get the google search bar back, but I'm not sure how

See Here...
https://discussions.apple.com/message/19334395#19334395

I want to get the source code of the examples of berkeley DB with Java

Hi
I want to get the source code of the examples of berkeley DB with Java
Thanks and Regards
Rahul

Look in the "examples" directory, in the BDB JE package that you downloaded.
--mark

I want to get an iPhone 5, should I get the white or black?

Similar Messages

Maybe you are looking for