I want to get improved with i5/ 8GB
I have purchase one Thinkpad X 220 from one individual (Used Thinkpad 35 months old,fairly used).Its configuration is as follows'Intel i5 v Pro' processor,8 GB DDR3 RAM,320GB HDD,Windows 7 proffessional. After getting it I had restored this by using Thinkvantage key to get factory settings thus to get its normal speed. But after that also,my thinkpad is booting up and perfoming as 'Pentium 4/512 DDR1 configuration'. It perfomes evry poor as compared to my i5/8GB PC. I have disabled some third party apps fromm boot up service but no improvemnt. I want a solution to speed up my Thinkpad as I'm getting ashamed of Thinkpad among my friends,co-workers and myself. Thanks in Advance
It's possible your HDD is damaged (bad sectors really slow down the drive). Check with the HD Tune Pro trial; look under the Health tab for any highlighted entries.
Similar Messages
-
Hi - was looking to buy a macbook air soon but wanted to get it with lion software....anyone know when that is available and second question is what is best software for personal money management that works with lion.....use quicken now thanks
quicken should work with lion.
Quicken Essentials will work with Lion. Most people that have used Quicken for a while (i.e. Quicken 2007) have found that Quicken Essentials isn't much better than a basic spreadsheet. It is a significant step down from previous versions and does not offer many of the features previously offered. Right now, it seems like the two most common options are iBank and MoneyDance.
Frankly... this is a major opportunity for these companies. The largest commercial distributor of this type of product has been Intuit (Quicken). That makes it hard for any other company to get any of that market as so many people were already using Quicken and may have had years of data stored in it. Now, with Quicken effectively out of the picture, it's a great chance for another company. Just imagine if iPhones were suddenly off the market. That would give other manufacturers a tremendous opportunity since they wouldn't have to fight an up hill battle against a market giant. -
Want to get velocity with quadrature encoder
I can count and measure the displacement from the encoder signal with your quadrature encoder example file.
But, can you please advise me know how to implement to get velocity or RPM from that somewhat easily?
Thank you for your help.Hey Encoder,
You can measure velocity by using a buffered, counting operation. With a buffered operation, the count is latched on the rising/falling edge of the gating signal. Therefore, if you provide a signal to the gate with a known frequency, you will be able to mathmatically determine the frequency of the signal connected to the source.
You can usually use another counter to provide a gating signal with a known frequency. There are example programs that illustrate how to do this.
DAQ-STC: Measuring the Frequency of a TTL Signal (Easy-Level VIs)
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3DD4756A4E034080020E74861&p_node=DZ52329&p_source=External
Measure a TTL frequency with DAQ-STC or NI-TIO in Visual Basic
http://si
ne.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3D7A756A4E034080020E74861&p_node=DZ52329&p_source=External
I hope this helps.
Regards,
Todd D.
NI Applications Engineer -
I am activating an old desktop pc with win7 and want to get online with my 890L.
What do I need for the desktop. What do I have to do to Win7 to recognize the hotspot?
You need a wireless network card if the pc doesn't have one built in. Once you activate the hotspot on your phone, your of can look for that network (emitted from the phone), but the pc has to have wireless network capabilities, or you will have to buy a wireless usb card (they are about $30 and look lime a little flash drive)
-
Boss wants to get Sony HDR-FX7 - is it a good camera with FCE HD?
I don't want to get stuck with a camera that doesn't do justice to the software.
I've heard on this forum that the Panasonic Dvx 100B is one of the best choices but is not HD. The boss says he is willing to go for HD because it will be implemented more in the future and he wants to be ready for it.
Can any of you give your experienced comments on this?
Thanks,
KenAll Hail,
From our company to you, thanks for each response here. The boss says he is appreciative of the input and is holding off on the purchase of a camera until he is sure he is getting the right one, that maybe the FX1 is the right one.
He sends his thanks, and I thank you too.
As my own personal request, I must repeat the above question for the FX1, I notice it produces mpeg2 format, which I assume needs to be processed through Streamclip before it can be read by FCE HD?
Ken -
Getting Stasted With WebDynpro ABAP
Dear All,
I am New to WebDynpro and want to get started with it. Right Now reading the Tutors and Understanding the Concept. I want to Create the WebDynpro Object in the SE80 but not finding any object called "Web-Dynpro-Comp./Intf." from the available object list in the SE80. Please Guide me as how to go with it.
Also please suggest suitable Link/Threads/Tutors to get Start with WebDynopro.
Regards,
Nikhi JoshiHi
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/21706b4b-0901-0010-7d93-c93b6394bc1d
in this link are two tutorial for start with webdynpro abap
for see webdynpro in se80 in the left bar you must select web dynpro comp. / intf
you must check the active service in the transaction sicf
in thid link you can find the service
http://help.sap.com/erp2005_ehp_04/helpdata/EN/46/d28dfa34bb12bee10000000a1553f7/frameset.htm
best regards Marco
Edited by: Menegazzo Marco on Apr 21, 2009 10:09 AM -
I just want to get started with my new out of the box MacAir. I canot move beyond the voice over welcome screen. It seems to be stuck. What do I need to do to advance out of it?
Bt seem to have got their act together. After six days! All of a sudden it works. What a surprise, shame their help desk would not admit anything was wrong.
-
I need help. I would like to download Ps CC and Lr, but don't want to get involved with the cloud, but would rather save on an external hard drive. Is this possible?
You can download the installers to your external drive. However when you install them they will install Photoshop and LR on you boot drive. Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release | ProDesignTools
-
Help Getting Started with the Zen Vision:M (Z
Hi,I just got my ZVM and want to get started with it. I have a couple of questions, first:?. I have Windows Vista. Can I just plug in the ZVM and go without using the Installation CDs? Or do I still need to install something off of the installation discs?2. Why 2 installation discs? There is with a black cover that says Easy Start CD and has the Urge and Window Media Player logo at the bottom. The other is just in a plain white bordered sleeve with a light colored disc that says Zen Vision: M Installation CD at the bottom. I think I want to start with the light colored disc, but want to make sure. Thanks.
I think that the White disk that says Zen on it is the one you want it has Creative Media Source on it and is a very useful tool for me, the other disk has Windows Media Player on it and will also install a connection to a website that you can purchase tracks from (which i took off as soon as i found this out) not the WMP though, for some reason i could not get my Zen to work properly without the WMP loaded on my pc, however i use the Creative Media Source instead of the WMP.
-
If i reset my ipad can i install paye games for free if i sign back into my apple ID. Please i need help because i need to update my games but i need to put in this billing thing and i want to get rid of it so then i cant buy games with my credit card
Hello,
As frustrating as it seems, your best to post any frustrations about the iPhone in the iPhone discussion here:
https://discussions.apple.com/community/iphone/using_iphone
As this discussion is for iBook laptops.
Best of Luck. -
I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
<B>DESCRIPTIONS</B>:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
<B>INSTRUCTIONS</B>:
1. Run the VI.
2. On the <B>DAQ Configurations</B> tab, specify the <B>sample rate</B>, <B>samples per channel</B>, device and channel configurations, and tachometer channel information.
<B>NOTE</B>: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to <B>Extract Even Angle Reference</B> tab. Specify the <B>number of samples to acquire</B> and the <B># of revs in reference</B> which determines the number of samples in even angle reference. Click <B>Start</B> to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in <B>Even Angle Reference</B>.
4. Switch to the <B>Remove Slow-roll Errors</B> tab. Click <B>Start</B> to acquire data continuously and view the compensate results. Click <B>Stop</B> in this tab to stop the acquisition.
<B>ORDER ANALYSIS VIs USED IN THIS EXAMPLE</B>:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva -
I have a column where I have implemented writeback, its working fine. On top of this I need to show 0 as No and 1 as yes in our report, that is also done. Now I want to enter Yes in a column where it was no and I want database table to get update with 1. I am not sure how to do it. SOmeone please help me out.
Hi ,
In your write back XML try the below query insert
INSERT INTO TABLE_XYZ (attribute1) values (SELECT CASE WHEN @{C1}=’Yes’ then 1 when @{C1}=’No’ then 0 else null end from dual)
Regards
Rajagopal -
I've recently been given a macbook pro from uni, with lots of adobe software on. I want to pair it with my iMac which has music etc and is it possible to get the software to the imac and the files to the macbook?Giving me the best of both :-)
You would need the original installation disks or files for the Adobe software to get it onto your iMac, and having it on two computers may not be allowed by your university's licensing. Talk to whoever issued the MacBook.
As to the music, just copy it over to the MacBook, either via Home Sharing, file sharing, or an external storage medium (hard drive, USB flash drive, etc.).
Regards. -
1) I have multiple accounts at the iTunes store and none are now associated with my purchases...I think because passwords have been associated with various id’s and I can’t log in and access those purchases. I want to get back to being able to use one id and password and be able to access those purchases.
2) When I upgraded my iPhone 3gs, to the latest version 5.0.1 (9A405), is when I noticed that i couldn’t update my applications. There are two names/accounts on the phone and prior to the update there was just the one. I have tried entering every conceivable password that I have ever used and get the incorrect password error every time. The apps on the iPhone are apparently associated with several/different accounts. I just want to get everything back to the way it was. One id and one password with purchases associated with just one account that can be updated on my computer as well as my iPhone.Hello sadiepix,
The following article details several things that can be done to quell iTunes' constant need for authorization.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Cheers,
Allen -
I have issue with my account acutely I can't download any application when I try to downloading any application it show my Apple ID has been disabled ,so please I want to get your usual support.
Sweet-jeje wrote:
... it show my Apple ID has been disabled ,..
If disabled for Security Reasons... See here http://support.apple.com/kb/TS2446
If not for Security reasons...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Maybe you are looking for
-
If I log out of, (shut down Firefox), when I try to open it again, I get a message that Firefox is already running, and I can't get access, I have to log off my system and log back in before I can access Firefox. Do you have any idea why this happens
-
CRM Smartform - standard text in variable window
Hi , I have a requirement in CRM Technical. In a variable window, there is an include text used to print the long text . The issue is that it is printing only few lines and not all the lines it should have printed as maintained in the database text.
-
Error code :d0000029 while purchasing Cross court tennis 2 App in lumia
Error code :d0000029 while purchasing Cross court tennis 2 App in lumia , I tried so many times But it is not yet solved. Trial version is working fine, When i tried to buy full game at last movement it is returning error as d0000029
-
How to launch a folder action on save (rather than move)?
Hello people. I'm working in Yosemite. I'm trying to create a folder action that keeps an up-to-date backup of MS word documents in a separate folder. Word for Mac does not allow me to save this backup in a separate folder. I have tried to create a f
-
Goodday, I have a question here with regards to the above. For example, in the attendance overview report, it will list down a list of employees whom are 'absent', 'Temporarily Absent' and 'At Work'. Can i know how are these derived from the backend?