I want to have 2-page view in ART: don't know how to enable it
I enjoyed the use of 2-page view in previous versions of Adobe Reader, but when migrating to the Touch version for Windows 8 I don't find where can I enable this feature, if it exists.
Close the "new page" window. You will be prompt to "Don't Save," "Cancel," "Save." Select "Don't Save."
Similar Messages
-
I have rented some movies and have them in itunes. I want to move them to my iphone but don't know how can someone help?
http://support.apple.com/kb/HT1390
Regards. -
My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
I have 2 video credits and I don't know how to use them
I have 2 video credits and I don't know how to use them
Would it matter how much the videos are? I bought a season of a tv show two of the episodes were not able to air so I got the two credits I just don't want to accidentally buy something right now. Thanks for the responses though that is what I thought I had to do.
-
I purchased an Ibook on my ITunes account that I wanted to give to my fiance. I don't know how to transfer it or even if I can. I only have an Ipod Touch so it won't be fun to read it on that! I haven't downloaded it yet. Can anyone help?
Me too!!! It says check your Downloads, but unable to find Downloads...
-
I have the new iPad . I don't know how my sister's apple ID was set. I have all under my iTunes account but when i need to update my apps, a different apple ID come up! how do i change that?
Hi maggieanntb, your sister's Apple ID came up because an app(s) was downloaded using her account. To prevent that from happening, you would have to delete the app(s) that were downloaded on her's, and re-download them using your own Apple ID.
-
Help!! working on a movie on Imovie. I had to delete a music file from a clip section and now there are some clips that have no audio!!! don't know how to get the audio back to my clips!!!! Help!!!
You can use some third party software to copy the music from your old iPod back to computer first, and then import the music into iTunes and re-sync them to yournew iPod. Here is a guide about how to transfer iPod music to computer. Hope it helps. Feel free to email me if you need further help.
-
My phone has no more storage but it says i have 5gb on icloud but i don't know how to use them.
My phone has no more storage but it says i have 5gb on icloud but i don't know how to use them.
iCloud storage doesn't affect the available storage on your device. It's for backing up your device and syncing your data, so you can recover the data if needed.
You probably need to import photos/videos to your computer or another destination (like a photo kiosk & burn CDs), and then delete them from your device. Or, delete some unused apps from your device. -
I'm trying to print some pictures in iPhoto but a error message apears in the screen saying that there is no theme installed and I need to have some theme installed. I don't know how to do that. Need help.
Reinstall iPhoto.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List. -
Hi, I tried to download a bunch of my favourite TV episodes. I was unable to get them all due to lack of storage. I increased my storage but the downloads didn't come. I tried deleting the already downloaded and viewed episodes but don't know how.
I'm wondering if I should increase my storage again but I'm not sure that's the issue.You need more storage on your iPad, however, it can't be increased. iCloud storage is ecternal to the iPad and is used for backup.
You need to delete some item on the iPad.
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
There are some wireless external hard drives that can be used with the iPad.
Best iPad External Hard Drive Storage Options
http://www.unlocktips.com/2012/11/best-ipad-mini-external-hard-drive-memory-stor age-options/
iPad Storage Solutions
http://www.ipadstoragesolutions.com/iPadWirelessStorage.php
SanDisk Connect Wireless Media Drive http://www.sandisk.com/products/wireless/media-drive/
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
Cheers, Tom -
I want to reconstruct my security questions but I don't know how to put a reconstruction e-mail adress to my apple ID
Click here for information. If you're trying to do this because you've forgotten the answers, you can't and need to contact Apple.
(88012) -
If someone phones my mobile number, they are prompted to leave a 10-second message which them comes to me as a text. I want real voicemail with real voices but I don't know how to set it up on my iPhone4S. Can someone help please?
Ask your wireless provider. None of what you describe has to do with the phone itself.
-
I have a 2013 Hyundai I20 and don't know how to download my iPhone5 contact list into the phonebook. Help please?
Thank you....I'll call the dealer - manual is next to useless.....have a nice day..
-
Quickbooks reports will not print. I think it has something to do with Adobe/Pages \but I don't know how to fix the issue. Help!
I don't see how it could have anything to do with any Adobe app or Pages. QuickBooks is its own thing and does not rely on any other apps to print.
I opened a couple of random reports and had no trouble sending it to a laser printer. Also no issue saving them to text file, or clicking the Export button at the top right of the report and having it open directly into Excel.
What exactly are you trying to accomplish, and what is failing? -
I want to install adobe speech recognition but I don't know how can I do it. ¿can you help me?
I have adobe speech recognition but Premiere CC tell me that I have to install.
I don't know how to install it.
¿Can anybody help me?
Thanks.http://helpx.adobe.com/premiere-pro/kb/installing-additional-speech-libraries.html
Maybe you are looking for
-
Can't get ICloud to update my Apple ID
I have had the same Apple ID for several years. I had to change my pw this morning with Apple Support. I can log into and out of my Apple ID just fine. When I try to access my ipad or iCloud on my computer, it wont take my pw for iCloud at all and
-
Navigating from Summary Report to Detail Report in OBIEE 11g
Hi, I have creted two reports.One corresponds to Summary and the other Detail.By clicking on one of the fields in the Summary report the values are captured and then the detail report is displayed based on the values selected. Now,What I need to know
-
IMac freezing - using 10.5 with newest 24" Intel
I've read a lot of posts about iMacs freezing and they seem to be mainly with the older gen's of them. In my case, my 24" Intel iMac freezes and the mouse will not move, the force quit won't work as the keyboard doesn't respond, nothing works, basica
-
When to refresh Servlet data from Data Base
Hello all, I have a servlet that retrive few hundreds thousands records from data base table. The data in data base table being updated once or twice in every week. Since same servlet instance serve all users, that access the servlet many times a day
-
What is the oldest version of Acrobat that will work with Mac OS 10.8? I have version 6 and it does
What is the oldest version of Acrobat that will work with Mac OS 10.8? I have version 6 and it does.