I want to increase my wireless network coverage upstairs and to the other side of my house. I have an airport extreme down stairs, can I get another one upstairs and hard wire it in?

Yes.
It has been covered recently. I as interested in same question matter of fact but I will have to look up details or you could search.
Bob Timmons has contributed to this question so look his up and find it as well.
See this link;
https://discussions.apple.com/message/18017606#18017606
Also this;
https://discussions.apple.com/message/18077215#18077215
Message was edited by: WilliamNewMart, to add links and correct spelling.

Similar Messages

Since upgrading to Yosemite I cannot get directly to Netflix. I get a message about having to download Microsoft Silverlight. I can't get that to work and don't want it anyway. I just want to open Netflix and play the movies. What should I do?

Since upgrading to Yosemite I cannot get directly to Netflix. I get a to Netflix and there is a big message about having to download/install Microsoft Silverlight. I can't get that to work and don't want it anyway. I just want to open Netflix and play the movies. What should I do?

I can't get that to work and don't want it anyway.
You need Silverlight. That is the application that plays the Netflix movies.
http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx

I have installed Airport Extreme on my iMac, but want to extend the wireless network with Airport Express. Everything is fine until I try to select Extend the wireless network. I select Extend Wireless network but have no success. Ideas?

I have installed Airport Extreme on my iMac, but want to extend the wireless to rooms with a weak signal. The internet connection is fine with the basic setup. As soon as I go into Airport Utility to select Extend Wireless Network and fill in what I believe is proper information, I get an error message that Airport Extreme no longer has an IP address, the internet connection is broken, and under Wireless, that there is a wireless network in existence that can't be found. Rebooting the modem only brings the Airport Extreme back to the starting gate so that the internet is once again available. I assumed (naively) that with the All Mac All-the-Time context, adding Airport Express would truly be Plug and Play. I got the plug, but no play. I asked a Comcast technical specialist about it and he said that I needed to reset the Airport Express settings back to their default, factory status. I looked that process up online and found out that the way to do that was to hold down the reset button, then plug Airport Express into the socket and wait for the green light to flash four times. Then wait 45 seconds and the default settings will return. I did all that, only to find out that after the initial flash of green, green never appeared again. I got a fast flashing yellow light, followed by the light going off. Apparently this didn't reset it properly. So, after hours trying to get this system to work, I appeal to someone who can see through this mess and provide the key to success!
highFly376

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

TS1398 I have an iphone 3gs and since I made the 6.01 update everytime I want to join a wireless network I get the same error "incorrect password" when I now it's correct, any one have a solution for this? Tks

I have an iPhone 3gs and since I made the 6.01 update everytime I want to join a wireless network I get the same error "incorrect password" when I now it's correct, any one have a solution for this? Tks

I would say that you would want to look into the "Exchange Mode" for GMail. That would allow your iPhone to sync calendars, contacts and email with GMail just fine. Doing the same with your outlook should also then sync those same with your PC using Outlook. I've done teh iPhone side of this, but I since I don't run Lookout for my email client, I'm not sure how that will work on the PC side.

I have an airport extreme for my main internet connection, an express to listen to music on my home theatre, another express to extend the network upstairs, and one more express for my wireless printer. whats the best way to setup the express stations?

So basically I would like to know if its best to have them setup on "join a wireless network" or "extend a wireless network"
Obviously the one I use to extend the network is setup that way, the other 2 are set on "join a network"
is this the optimal configuration? or should I have them all on "extend a wireless network" ?

There is really no "best" setting here for the AirPort Express devices. If you need more wireless coverage in the area where an Express is located, then it makes sense to configure the Express to "extend" a wireless network.
If you already have good coverage in an area where an Express is located, then the "join" configuration makes sense.
I've yet to meet the first user who felt that he/she had too much wireless signal coverage in their home, but you never know.

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections. For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb. These terrible download speed really only affects the iPhones as my MacBook Pro usually gets the good speed no matter where it is. I don't believe there is anything wrong with my phone because if I am in the part of the house that uses just the extreme the download speeds on the iphone goes up to 50-75mb. As a note I have an AirPort Extreme on the top floor of my house (second floor) that's where my modem is located. On the first floor that's where one airport express is located. I also have another airport express in the basement that is accessed by my landlord. Any thoughts on how to fix this would be helpful.

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections.
It appears that your networking goals with the AirPort Express is to use it as a wireless Ethernet bridge instead of using it to extend the wireless range of your AirPort Extreme. The latter requires that the Express Wi-Fi radios be enabled.
If you intended to use the Express as a wireless bridge, you just need to reconfigure it to "Join a wireless" network instead of "Extend a wireless network."
For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb.
In an extended network, the placement of the extending base station is critical as it can only extend the wireless network at the bandwidth at which it receives it.
Please check out the following AirPort User Tip for details on optimal base station placement.

HT4259 Q: Can I use an older Airport Express-g router (not -n) to extend my Airport Extreme-n wireless network? If Yes, are the instructions the same as for adding an Airport Express-n router?

Q: Can I use my older Airport Express-g router (not -n) to extend my Airport Extreme-n wireless network? If Yes, Are the instructions the same as for adding an Airport Express-n router?

If you want to extend, using wireless only, the 802.11g Express doesn't support this.
However, if you want to use bridge mode over Ethernet or Powerline adapters then this is supported.

When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine. Any ideas on how to get 5.0 working?

When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine both placed. Any ideas on how to get 5.0 working? I thought 5.0Ghz was supposed to have a wider range. Do I need to change a setting on the Macbook Pro?
Thanks, W

I'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
The upside is that the 5 GHz signal will allow faster speeds.
The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster.

I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help

I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help.
They said I need to change my settings to NAT settings. I haven't been able to figure out or find anything. I have also spoken to Apple Support on the phone for hours without being able to figure out how to do this ( i don't think he knew much either lol.) Please help me because I've got about 15-20 devices in my house that require to be connected to the internet and this is just making things ridiculously slow and painful for me.
Thanks!

It is on DHCP & NAT under router mode yet my isp is still the one issuing ip addresses to my devices instead of the router issuing them

HT2497 I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable. The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning

I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable. The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning great. The network name I assigned to the TC is also not appearing among available networks. How do I remedy this, please?

What OS on the computer you are using to setup the TC?
Did you turn on ipv6 for wireless to link-local... this is essential for network access now??
Try power cycling the network.. start up in correct order.. uverse.. 2min wait.. TC.. 2min wait.. computer.
No luck factory reset and start over. Use ethernet cable as well to the computer to help it.
No luck I can show you manual method.

I have an airport extreme and am trying to extend the range of the wireless network with an airport express. I set it up with the help of apple support, both lights are green on both airports, but the range didn't change. What could be wrong?

I am trying to extend the range of my wireless network by adding an airport express to an airport extreme. I configured it with the help of apple support, but it hasn't changed the range that I can access the internet wirelessly in my house. What could be the problem? Does weather affect the wireless network??

So, on the Extreme you checked the box to "allow this network to be extened" ?
Correct?
And on the Express, you set it up to "Extend a wireless network" ?
Correct?
See this Apple article and see if you missed anything...
http://support.apple.com/kb/HT4145
To learn about other options for expanding your Wi-Fi base station wireless network and things you should consider before expanding your network, click here.
Set up: Components of an extended network
➊ Primary Wi-Fi base station (this is the base station connected directly to the Internet)
➋ Extended base station
Configuring a wireless extended network
To create a wireless extended network, you must place any extended Wi-Fi base stations within range of the primary Wi-Fi base station.
Start with the device that will be configured as the primary Wi-Fi base station. Then configure your extended Wi-Fi base stations, ensuring that each is within direct range of the primary Wi-Fi base station.The physical location of extended Wi-Fi base stations will vary according to the building environment and may require some experimentation.
If you have configured your Wi-Fi base stations in the past, it may be helpful to do a factory default reset of each Wi-Fi base station that will be part of the wireless extended network before you begin.

NB200 Can connect to wireless networks, but cannot connect to the internet

I have been able to connect my Win XP netbook to my secure wireless network at home, other people's networks and public networks like the library and McDonalds. This week I'm away from home and discovered that while I can still connect to a number of different wireless networks, I cannot connect to the internet using Internet Explorer.
I've had this problem once before and fixed it by reinstalling Windows XP and all my other software. I have no idea why it has happened again. I'm hoping for a less drastic solution to the problem..?

Hi Nakia,
> I cannot connect to the internet using Internet Explorer.
Have you tested other browsers like Mozilla Firefox and does this work?
As MasterG wrote try to renew the IP address using the commend line.
Last week I had a similar problem and I could solve it by updating the WLAN driver. Just remove the driver, restart the notebook and install the newest one. :)

Trying to connect our exercise bike to our wireless network. It sees the network, but once pass phrase is put in, it won't connect. Any suggestions? We have an Airport Extreme.

I am trying to connect our exercise bike to our wireless network. It sees the network, but once pass phrase is put in, it won't connect. Their tech support said the problem is with the router and we may need to open ports 80, 443 and 4348. We have an AirPort Extreme and I scanned for open ports and found 80 already open but the others are not. Tried using Port Mapping, putting the port number 443 in both the Public UDP and TCP fields and the Private UDP and TCP fields also. The Private IP address defaulted to 10.0.1.201 which is right outside of the DHCP range. Will this be the IP of the bike or should I change it to something else? Are the values I put in the fields totally wrong? Bike is still not connecting. Thanks for any help!

Here's an update:
Now the light is not blinking. It's a solid, consistant green. I don't know if it helps to narrow it down or anything, but I just figured I'd mention it.

I have an Airport Extreme which I'm using for a wireless network. Can I also plug in my iMac to one of the free ethernet ports on the Airport Extreme to connect to the Internet that way? Thank you.

I have an Airport Extreme which I'm using for a wireless network. (The wireless router is connected to a DSL modem.) Can I also plug in my iMac to one of the free ethernet ports on the Airport Extreme to connect to the Internet that way? Thank you.

Yes, you can.

I have an airport extreme base station and have no clue how to set up a private wireless network instead ton open one i have now.

I have an airport extreme base station and have no clue how to change to a pawword type network from the network i have now that is free to the neighbor hood.

Which version of the AirPort Utility are you using?

I want to increase my wireless network coverage upstairs and to the other side of my house. I have an airport extreme down stairs, can I get another one upstairs and hard wire it in?

Similar Messages

Maybe you are looking for