I want to increase the range of the current that my program can measure.

I have NI-DAQ 6024E and CB-68LP connector.I'm using pins 68 & 67 for input current that is to be measured.It somehow reads 20 mA when it's 200 and 30 mA when it's 300!! Also please tell me how can I increase the current range that can be read by this program and hardware as it currently reads upto 500 mA and I need to read upto 1 A.

Hi Mark, basically if I connect the terminals of my valve to ACH0 and ACH8,then it'll be a parallel connection.Here surely I'll get the voltage to read and i can divide by my resistance to calculate the current, but I dont want to do that.That is possible even with a regular calculator.Here I have a program that reads current directly but somehow I'm not able to read proper current.And my valve is a current controlled device so the more current I pass through it, more does it open.Now with the attached program,I want to know how to exactly wire my valve with the CB-68LP connector so that I can read the current.Please also suggest me how exactly to put the resistance in the circuit.
Attachments:
cont_current_meas.vi ‏58 KB

Similar Messages

I have a power mac g4 with mac os 10.4. 11 , I want to change the hard-drive ,what program can I used to transfer one hard-drive to another hard- drive on this mac pc.

I have a power mac g4 with mac os 10.4. 11 , I want to change the hard-drive
,what program can I used to transfer one hard-drive data to another hard- drive on this mac pc.

The Disk Utility, Carbon Copy Cloner, SuperDuper, or similar software. For best results, place the second drive inside the computer or in a FireWire enclosure and boot the computer from it before removing the internal drive.
(66989)

I have been a Quicken user for many years but have heard that the move to Yosemite is a Quicken nightmare - so I'm trying to research new software. I'm overwhelmed by the number of available programs, all the things that each program can do and perp

I have been a Quicken user for many years but have heard that the move to Yosemite is a Quicken nightmare - so I'm trying to research new software. I'm overwhelmed by the number of available programs, all the things that each program can do and perplexed by the arguments for and against each feature in each program.
My needs are relatively simple for my small business: 1) I need to be able to import years worth of Quicken data into the new program 2) I need to easily print checks 3) I need to easily reconcile my checking account each month and 4) I need to generate basic reports for my accountant (e.g. P & L statements, category summaries).
I have been a FileMaker user since 1.0 so I don't need (or want) A/R, A/P, inventory management, invoicing, etc.
I just need a solid, dependable electronic checkbook per above.
Suggestions?

Bobreba wrote:
I am using Quicken Essentials 1.7.4 on a [Mac Pro, 2.8 Ghz Quad Core Intel Xeon with 16 Gb of memory], running 10.7.5. I am in the process of upgrading everything to work on Yosemite and Quicken seems to be the most difficult problem to overcome.
Thanks for your response and feedback.
I would recommend you continue with Quicken Essentials. As noted by others, it performs well on Yosemite.
My personal experience is Quicken 2007 for Mac also on 10.7.5 (with many reports of it both updated and successfully running on Yosemite) and I personally would not touch Quicken Essentials with a 10 foot pole -- BUT, if it ain't broke for you, don't fix it!

Smartform : Main window : Want to increase the size of main window

Dear Sir,
In my smartform my Main window is fixed after four windows(2 + 2) but only in first page.
Now my requirement is there in second page i am only showing two windows out of four and in new vaccent space produced by two window i wanted to increase the height of window equal to 2 window in second page onwards.
Please guide.
With Rgds,
Nirav Parekh

You just need to change the UPPER and HEIGHT values for the MAIN window on the second and subsequent pages. Presumably, you have a different page definition for these pages? If that's not your question, then please re-phrase it.

I want to increase the variable length

Hi all,
I want to increase the variable length at runtime(When iam doing debugging).
Can any body tell me idea..

Hi,
I dont think you can change variable length in debugging mode.
What you can do is if you variable is a character format you can declare it as string instead of character.
You can pack -unpack with leading zeros..and many other data manuplation.
But i doubt on changing the characterstics of the variable at runtime.
Look for some alternative data type for your requirement.
Regards
Sourabh

I want to increase the RAM of iMac?

Hi,
I want to increase the RAM of iMac 27"(Late 2013) to 32GB, is it possible to do the same?
If yes, then please let me know the steps to do it.
Thanks & Regards,
Ankush Madan

Yes, you can upgrade it to 32GB, most on this forum recommend two vendors OWC (www.macsales.com) or Crucial. If you are in the USA use OWC, if you are anywhere else then Crucial. BTW here is s link to show how easy it is to install:
http://eshop.macsales.com/installvideos/imac_27inch_late_2012_mem_m/
Good luck.

I want to increase the ringer volume but not the background volume (ie texts, emails, etc)

I want to increase the ringer volume but not the background volume (ie texts, emails, etc)

nigelb999 wrote:
Can anyone shed some light as to why it's not possible to adjust the ringer volume at the lock screen? Even though it's possible to adjust the volume during music playback and responses from Siri, etc.
Cannot answer that question. That is a decision made by Apple.
nigelb999 wrote:
If there was a profile app available in the app store that allowed me to automatically set different volume levels at different times of the day it would be great - particularly if the app didn't require me to jailbreak the phone.
There would not be an app like that, as they would not have access to the API. You can provide feedback to Apple if you would like to see this enhancement at http://www.apple.com/feedback and click on the appropriate link.

I have won a 11 inch 128GB MacBook Air and want to increase the storage to 256GB, is that possible?

I have won a 11 inch 128GB MacBook Air and want to increase the storage to 256GB - is that possible?

When one is tight on storage space, offloading data onto a $79 external spinning disk drive is cost effective but not portable. When you are not at your desk you cannot access the data. On any Mac that has a MicroSD slot, one can add up to 128 GB of inexpensive portable storage using the following options that cost less than $100. This is cost-effective alternative to upgrading the internal SSD on a MacBook Air for $200 to $315. One can use multiple microSD card to multiply the storage they carry with them.
Time Machine does not backup these microSD cards so using an alternative backup program, such as Carbon Copy Cloner or Super Duper! would be prudent. One could partition their Time Machine backup drive(s) with 64 or 128 GB partitions (one per microSD card) so another backup hard drive is not needed.
For more about backups:
Time Machine Basics: http://support.apple.com/kb/ht1427
Most commonly used backup methods:
https://discussions.apple.com/docs/DOC-3045
Methodology to protect your data. Backups vs. Archives. Long-term data protection:
https://discussions.apple.com/docs/DOC-6031
TheMiniDrive.com Adaptor: $30 http://www.amazon.com/s/ref=bl_sr_pc?ie=UTF8&field-brandtextbin=TheMiniDrive.com &node=541966
64 GB Flash 30 MB/s: $47 http://www.amazon.com/SanDisk-microSDXC-Memory-Adapter-SDSDQU-064G-AFFP-A/dp/B00 9QZH6JS/ref=pd_bxgy_pc_img_y
Total $77 for 64 GB of portable storage.
PNY StorEDGE 128 GB: $95 http://www.amazon.com/PNY-StorEDGE-Memory-Expansion-P-MEMEXP128U1-EF/dp/B00DC9U2 Q8/ref=pd_cp_pc_3
Thanks go to wwynne23 for pointing me to this miniSD card solution.
PlotinusVeritas gives some great suggestions for purchasing external hard drives in this thread:
https://discussions.apple.com/thread/5602141?tstart=0

I have the MacBook Pro (retina, 13 inch, Mid 2014) Memoria 8GB 1600 MHz DDR3 and I want to increase the memory. What kind of memory do I have to buy?

I have the MacBook Pro (retina, 13 inch, Mid 2014) Memoria 8GB 1600 MHz DDR3 and I want to increase the memory. What kind of memory do I have to buy?

The RAM in the retina model can not be upgraded.

Want to increase the number of row in corporate address list

In our Corporate address list only 10 address shows in a page. I want ot increase the row size to 50.
Can any one kindly help me in solving the problem
Regards.
Mostafiz.
IT Dte
AHQ
Dhaka
Bangladesh

each individual user can set it by going to the preferences page. The same value is used for both listing the number of messages and address list.

My performance is very slow when I run graphs. How do I increase the speed at which I can do other things while the data is being updated and displayed on the graphs?

I am doing an an aquisition and displaying the data on graphs. When I run the program it is slow. I think because I have the number of scans to read associated with my scan rate. It takes the number of seconds I want to display on the chart times the scan rate and feeds that into the number of samples to read at a time from the AI read. The problem is that it stalls until the data points are aquired and displayed so I cannot click or change values on the front panel until the updates occur on the graph. What can I do to be able to help this?

On Fri, 15 Aug 2003 11:55:03 -0500 (CDT), HAL wrote:
>My performance is very slow when I run graphs. How do I increase the
>speed at which I can do other things while the data is being updated
>and displayed on the graphs?
>
>I am doing an an aquisition and displaying the data on graphs. When I
>run the program it is slow. I think because I have the number of
>scans to read associated with my scan rate. It takes the number of
>seconds I want to display on the chart times the scan rate and feeds
>that into the number of samples to read at a time from the AI read.
>The problem is that it stalls until the data points are aquired and
>displayed so I cannot click or change values on the front panel until
>the updates occur on the graph. What can I do to be a
ble to help
>this?
It may also be your graphics card. LabVIEW can max the CPU and you
screen may not be refreshing very fast.
--Ray
"There are very few problems that cannot be solved by
orders ending with 'or die.' " -Alistair J.R Young

Increase the amount of times you can "Step backward" alt+cntrl+z?

I find myself saving numerous iterations of my files, because the defualt settings only let step backwards a few times. Is there a way to greatly increase the amount of times you can step backward? I though perhaps the history window would let me double back on many of my actions, but even that did not go far back enough.

I'm not fully sure I follow you in this logic yet... I apologize if I'm being dense.
Saving your work occasionally is always a good idea, REGARDLESS of the number of history states. Even if you keep only 10 history states you'll lose just as much work if you haven't saved anything since the last several hundred steps and elephant droppings unexpectedly shut down your PC.
The important thing I'd like to note is that my choice of the number of history states, from what I have observed, does not seem to change the stability of Photoshop in any way.
If you find choosing a larger number of states does destabilize Photoshop on your system, perhaps you have RAM problems? Or maybe configuration issues? What do you have your RAM usage limit set to?
Your example about brush strokes is actually a good one to make my point that a deeper history can be a Good Thing. For example, if I touch up 75 spots (hot pixels in an astroimage, for example) with separate applications of the Spot Healing Brush, then I want to compare before and after images but I forgot to make a layer copy way back when, I can copy the image, go back 75 steps in the History, and paste the result over the original from an old history state to blink a before/after comparison.
The thing that's not been mentioned here is Efficiency. I have purposely populated my workstation with a lot of high reliability RAM (16 GB ECC). You might find Photoshop's efficiency going down if your system doesn't have enough RAM to be able to easily manage a deep history... Efficiency matters too, and hammering the scratch disk with a lot of I/O can not only slow things down for you but can also sometimes expose latent instability in a system.
-Noel

HT1386 I have a brand new ipad with iOS 6.1.3 and an imac with OS 10.5.8. I cannot update my OS on this machine, but want to sync the new ipad. What can I do?

I have a brand new ipad with iOS 6.1.3 and an imac with OS 10.5.8. I cannot update my OS on this machine, but want to sync the new ipad. What can I do?

If it's an Intel Mac, you can upgrade it to Mac OS X 10.6.8.
If it's a PowerPC Mac, you need to use these instructions and/or iTunes Match to put content on the iPad.
(83068)

How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
Attachments:
micliente.llb ‏183 KB
miservidor.llb ‏186 KB
rdsubvis.llb ‏214 KB

I down loaded your files but could use some instructions on what needs run.
It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

HT204053 I want to use the same apple id for iTunes and iCloud...but I have both set up..my problem is I want to use the one that I use for iTunes for both

I want to use the same apple id for iTunes and iCloud...but I have both set up..my problem is I want to use the one that I use for iTunes for both

iForgot.com

I want to increase the range of the current that my program can measure.

Similar Messages

Maybe you are looking for