I want to insert a picture into a body of text in a blog entry page.

This has me stumped. I did it once but cannot do it again.
How can I place a picture into a body of text? I have a print-out from the HELP menu but it is not clear. It talks of inline and fixed objects. I think I want a fixed object -- one that does not move along with the text as the text grows/moves along the page incrementally.
Because I am working with the photo on a blog entry page I cannot do the Choose Insert > Choose > Select the file, and click insert. I cannot because (1) The picture has to stay on the page in that Magic Frame, and (2) the choosing capability of the iWeb program does not enable someone to go inside the iWeb program and land on a certain page.
I am working on the blog page. Instead of a tiny little picture of a doll at the top of the page, I want to raise all of the text and put the little doll's head inside the text body.
I am so stumped. The instructions are not clear at all.
Lorna in Southern California
Fri, Sep 15, 2006 11:52 PM PST

Well i did exactly what your trying to do...go to
http://www.mac-switch.com
and view the blog "power button shortcut"
Go to the section you want to add the photo
to...Click "insert" then "choose" and choose the file
you want to put in there.
Good luck
Rob.
Hi Rob......
You know, I went to that Power Button Shortcut blog and for the life of me, your point went flying over my brains -- I just did not get what point you were making to me. The Power Button thing was not what I was trying to do. I was trying to put a PICTURE of a doll's head inside a body of text. That means I had to get text wrap to kick in, and..........
But the bottomest line is, I finally did it. I don't know how I did it because I was in a state of just clicking around, trying to move text. It's a long story to duplicate, but I went through several steps and since it was just desperation moves I was doing, I don't have a set of notes to go by for the next time.
The hard part, or one of them, was to get the Text Inspector to make he Text Wrap workable. For a long time , no matter what I did, the Text Wrap option remained greyed out. It was maddening. Then for reasons that I cannot recreate in an orderly fashion, I got the Text Wrap option to get bolded out, and thus an option.
Thank you for trying. BTW, I think your pages look wonderful and very slick (which I think is the right look for what you want to do with your website).
Lorna in Southern California

Similar Messages

How do I insert a picture into iMovie regardless of aspect ratio

When I insert a picture, i either have the choice of cropping the picture or having black bars on the sides. How can I insert a picture into imovie and not be dictated based on the aspect ratio. thanks

Klaus1 wrote:
Must be one of the wonderful improvements introduced in iMovie 11.
nope, never.
look:
example #1: a 1:1 pic in a 16:9 screen
option A bars l/r
option B cat-off
example #2: a wiiiide screen pic in a 16:9 screen
option A bars t/b
option B catcut off
and you don't want kitty look like that:
(1:1 aspect ratio distorted to make fit onto a 16:9 screen)

Acrobat form field that allows Reader user to browse and insert a picture into a predefined area

Is there a way to do insert a form field into an AcroForm that allow Reader users to browse and insert a picture into that form field?
I know that LiveCycle can do this, but I need to do this using an AcroForm. Or maybe there's a third-party plug-in that can be used in an AcroForm to do this?

Jay,
The new version of Reader, which was announced today (see AcrobatUsers.com), will now allow you to use the field.buttonImportIcon method: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.737.html
For a bit more information, see: http://forums.adobe.com/thread/743823
Here's the minimum code that can be used in the Mouse Up event of a button that's configured with a layout that's something other than "Label only":
// Mouse Up script for a button
event.target.buttonImportIcon();
Since this isn't backwards compatible with Reader, you'll probably want to add additional code to test what version is being used and alert the user if it's pre-11. You should also check the return value to see if anything went wrong. The hard part is getting everyone to upgrade, but this and a number of other features should make it worth it.

Insert editable picture into PDF form?

Good day,
I am creating editable marketing flyers for a client. I'm opening my PDF (originally created in Illustrator) in Acrobat and adding editable form feilds for the end user to add their contact information to each piece. The enduser also wants to add a photo with their contact info. Is there a way to create this as part of the form? Ultimately, I'm wanting them to be able to insert a picture into a specified area and not have to resize the photo. Is this possible in Acrobat professional?
Any information would be greatly appreciated! I'm working in CS3 and Acrobat 8, on a mac.
Cheers,
Lilly

This post has been invaluable for me! Thanks for everyone input. I have used the event.target.buttonImportIcon(); javascript to create PDF's the user can import, and it works great. However I now have on last challenge and I am hoping someone on this forum can help out with. Is there anyway (with a little javascript on the button) to have the image the user uploads flip upside down? I have a document that needs to be folded in half, and it would be perfect if I could have the user upload the image to both buttons, but have one button flip the image upside down. I know I could have the user do that image flipping and re-saving on their own, but I am trying to simplify things. Any ideas here would be helpful.
Thanks!

Insert a Picture Into a Panel....

How can i insert a picture into a JPanel.
Actually I want to show the picture only to the left hand side of the
JFrame.
Kindly help me.
Thanx

I would suggest to use a JLabel instead of JPanel.
And then go ahead like described in the other tips.
The JLabel can then be placed whereever you want inside your frame.
Btw. if you just need something like a dialog - with a label to the left side, few buttons and some objects inside - I recommend to read the tutorials for JOptionPane - it is much easier to use this class instead of doing all the code on your own.

I want to insert .pdf files into a "Master" .pdf file at pre-determined intervals - how do I do this?

I want to insert .pdf files into a "Master" .pdf file at pre-determined intervals - how do I do this?

Hi markm11762689,
When you insert pages, you can determine whether they go before or after the first or last page, or a page number that you specify.
If you're inserting multiple files at once, they will all be inserted in the same spot that you specify in the Select File to Insert dialog box.
There may be a way to handle this programmatically, and there are some very clever folks who visit these forums regularly. Let's see if they chime in...
Best,
Sara

How do you insert a picture into an iMovie video?

how do i insert a picture into an iMovie video? (i know it's simple and i've done it before, but i can't figure it out now )

Just drag it onto the Project timeline From iPhoto or outside of iMovie...
rick

How do you insert a picture into another picture?

How do you insert a picture into another picture. For example, one person is missing from family photo & I'd like to insert that person's face.

By using an external editor:
In order of price here are some suggestions:
Seashore (free)
The Gimp (free)
Graphic Coverter ($45 approx)
Acorn ($50 approx)
Pixelmator ($50 approx)
Photoshop Elements ($75 approx)
There are many, many other options. Search on MacUpdate. You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

I also have a .csv file with the name of a jpeg in one column and a text description of each jpeg in a second column. Is there a way to automatically insert one jpeg (photo) and its corresponding text, each pair on one page, into a Indesign document?

I also have a .csv file with the name of a jpeg in one column and a text description of each jpeg in a second column. Is there a way to automatically insert one jpeg (photo) and its corresponding text, each pair on one page, into a Indesign document?

I would also recommend to write the description into the meta data. This would allow to place a text frame above the image and it is possible to add meta information and file name automatically together with the image, when you place it or even in a prepared template.
Meta data information can be written easily in Bridge in the Meta File Workspace.

Why does my Apple Mail insert old messages into the body of new emails?

Why does my Apple Mail insert old messages into the body of new emails? The correct sender's name will appear in the "From" column, but an old message from a different sender in the body. This happens randomly. I have an iMac OSX 10.6.8. I recently had the hard drive cleaned, but Apple Mail seemed to be running fine when I set it up again. Could this be a virus? What should I do about it? Thanks for any insights!

Thanks. While you were replying to my question, I went into notifications and figured
it out. Appreciate the quick response!

How do i insert a picture into a table cell

hi
i am trying to insert a photo into a table cell in Pages of iPad.
how do i do that?
thanks

I have this question too. It is very important for me to insert pictures into tables in order to complete my lab reports. This feature needs to be added; the software is useless without it. It is things like this that make me regret Apple purchases.

Insert a Picture into the Picture/Image Content Control using Open XML SDK 2.0

I have created a word template as follows
Here PizzaPicture is a Picture Content Control, PizzaName is a Plain Text Content Control and PizzaDescription is a Rich Text Content Control
I am able to assign text to PizzaName and PizzaDescription Easily but not able to even locate the PizzaPicture. Here is my code
using (WordprocessingDocument document = WordprocessingDocument.Open(@".\test.docx", true)) {
MainDocumentPart mainPart = document.MainDocumentPart;
DocumentFormat.OpenXml.Wordprocessing.Text text = null;
SdtContentBlock pizzaNameBlock = null;
SdtContentBlock pizzaDescriptionBlock = null;
//SdtContentBlock pizzaPictureBlock = null;
List<SdtBlock> sdtList = mainPart.Document.Descendants<SdtBlock>().ToList();
foreach (SdtBlock sdt in sdtList)
Console.WriteLine(sdt.SdtProperties.GetFirstChild<Tag>().Val.Value);
SdtBlock s1 = mainPart.Document.Body.Descendants<SdtBlock>().Where(r => r.SdtProperties.GetFirstChild<Tag>().Val == "PizzaName").Single();
SdtBlock s2 = mainPart.Document.Body.Descendants<SdtBlock>().Where(r => r.SdtProperties.GetFirstChild<Tag>().Val == "PizzaDescription").Single();
SdtBlock s3 = mainPart.Document.Body.Descendants<SdtBlock>().FirstOrDefault(r =>
SdtProperties p = r.Elements<SdtProperties>().FirstOrDefault();
if (p != null)
Console.WriteLine("P is not null");
// Is it a picture content control?
SdtContentPicture pict =
p.Elements<SdtContentPicture>().FirstOrDefault();
if (pict != null) Console.WriteLine("Pict is not null");
// Get the alias.
SdtAlias a = p.Elements<SdtAlias>().FirstOrDefault();
if (pict != null && a.Val == "PizzaPicture")
return true;
return false;
if (s3 == null) {
Console.Write(" s3 is Null");
} else {
Console.WriteLine("s3 not null");
if (s1 != null) {
pizzaNameBlock = s1.Descendants<SdtContentBlock>().FirstOrDefault();
text = pizzaNameBlock.Descendants<DocumentFormat.OpenXml.Wordprocessing.Text>().FirstOrDefault();
// here you can set the current time
text.Text = "Peperoni";
Console.WriteLine(text.Text);
string embed = null;
if (s3 != null)
Drawing dr = s3.Descendants<Drawing>().FirstOrDefault();
if (dr != null)
Blip blip = dr.Descendants<Blip>().FirstOrDefault();
if (blip != null)
embed = blip.Embed;
if (embed != null)
IdPartPair idpp = document.MainDocumentPart.Parts
.Where(pa => pa.RelationshipId == embed).FirstOrDefault();
if (idpp != null)
ImagePart ip = (ImagePart)idpp.OpenXmlPart;
using (FileStream fileStream =
File.Open(@"c:\temp\pepperoni.jpg", FileMode.Open))
ip.FeedData(fileStream);
if (s2 != null) {
pizzaDescriptionBlock = s2.Descendants<SdtContentBlock>().FirstOrDefault();
string altChunkId = "AltChunkId12345";
AlternativeFormatImportPart chunk = mainPart.AddAlternativeFormatImportPart(AlternativeFormatImportPartType.Xhtml, altChunkId);
chunk.FeedData(File.Open(@".\html.txt", FileMode.Open));
AltChunk altChunk = new AltChunk();
altChunk.Id = altChunkId;
////Replace content control with altChunk information
OpenXmlElement parent = pizzaDescriptionBlock.Parent;
parent.InsertAfter(altChunk, pizzaDescriptionBlock);
pizzaDescriptionBlock.Remove();
mainPart.Document.Save();
document.Close();
Here the call mainPart.Document.Descendants<SdtBlock>().ToList(); returns me only 2 items PizzaName, PizzaDescription but
no PizzaPicture.
Secondly the line SdtContentPicture pict = p.Elements<SdtContentPicture>().FirstOrDefault();
returns NULL. So it seems that there is no element of type SdtContentPicture.
What am I doing wrong? I am pretty sure that I have put PizzaPicture as a Picture content control.
My objective is to locate this control in the document and then insert an image into it programmatically.
MSDNStudent Knows not much!

Hi,
I'm running some test on your code, and I'll come back as soon as I get some update. But before that, I would recommend you to bind customXMLPart with the content controls via Content Control Tool Kit,
which enables us to bind customXMLPart with CC by dragging and dropping.
After binding, you can change contents of the template via OpenXML SDK easily as the following code:
private void button1_Click(object sender, EventArgs e)
string fileName = @"C:\CCTest.docx";
WordprocessingDocument wordDoc = WordprocessingDocument.Open(fileName, true);
MainDocumentPart mainPart = wordDoc.MainDocumentPart;
CustomXmlPart customPart = mainPart.CustomXmlParts.FirstOrDefault();
//convert image into string
string picName = @"C:\Users\Public\Pictures\Sample Pictures\Desert.jpg";
System.IO.FileStream fileStream = System.IO.File.Open(picName, System.IO.FileMode.Open);
System.IO.BinaryReader br = new System.IO.BinaryReader(fileStream);
byte[] byteArea;
byteArea = br.ReadBytes(System.Convert.ToInt32(fileStream.Length));
string picString = System.Convert.ToBase64String(byteArea);
//Load the XML template
string DataString = Properties.Resources.XMLData;
XmlDocument xmlDoc = new XmlDocument();
xmlDoc.LoadXml(DataString);
//change the value
XmlNodeList xmlNode = xmlDoc.GetElementsByTagName("pizzaPic");
xmlNode[0].InnerText = picString;
xmlNode = xmlDoc.GetElementsByTagName("pizzaName");
xmlNode[0].InnerText = "Pizza Name";
xmlNode = xmlDoc.GetElementsByTagName("pizzaDescription");
xmlNode[0].InnerText = "Pizza Description";
//write the custom xml data into the customxmlpart
System.Xml.XmlTextWriter writer = new System.Xml.XmlTextWriter(customPart.GetStream(System.IO.FileMode.Create), System.Text.Encoding.UTF8);
writer.WriteRaw(xmlDoc.InnerXml);
writer.Flush();
writer.Close();
fileStream.Close();
br.Close();
mainPart.Document.Save();
wordDoc.Close();
and the XML template of the project would something like:
<?xml version="1.0"?>
<Pizza xmlns="http://Test/ContentControls/Pizzas">
<pizzaPic></pizzaPic>
<pizzaName></pizzaName>
<pizzaDescription></pizzaDescription>
</Pizza>
I hope this helps.
Calvin Gao[MSFT]
MSDN Community Support | Feedback to us

How can I insert a picture into a AbsoluteLayout ?

Hi everybody.
I am using a null layout and I don't know how to insert a picture.
public static void addComponentsToPane(Container pane) {
        pane.setLayout(null);
       JButton b1 = new JButton("one");
       /* ... the rest of the elements...*/
      pane.add(b1);
     Insets insets = pane.getInsets();
     Dimension size;
     size = b1.getPreferredSize();
        b1.setBounds(250 + insets.left, 40 + insets.top,
                     size.width , size.height);
   /* and the rest of the program with createandshowgui and main */Can I do with a picture the same thing that I did with this button (setBounds etc?)
If yes, how can I do that?

blackblack13 wrote:
Thanks for the answer but why you say no to use null layout?what is the disadvantage?The disadvantages are having an app that is completely inflexible and does not adapt well to different operating systems and desktops. Please read the Sun tutorial on using layout managers.
And I tried using a JLabel and then make a new ImageIcon(the target of the picture) but I have an error when I add it to the pane with pane.add(picture); where the picture is the JFrame of the photo and pane is the name of the container.because you're doing this all wrong. You shouldn't add a JFrame to a container. Have you looked at the JLabel tutorial in the Sun tutorials as was suggested above?
Can you write me the exact commands that I should use?No, but we all can guide you to do what you want to do, but first we need to know exactly what this is. So, what exactly are you trying to do here? Details are very important.
Thank you very much.You're welcome.
edit: the tutorials can be found here:
[Really Big Index|http://java.sun.com/docs/books/tutorial/reallybigindex.html]
[How To Use Labels|http://java.sun.com/docs/books/tutorial/uiswing/components/label.html]
[Laying Out Components Within A Container|http://java.sun.com/docs/books/tutorial/uiswing/layout/index.html]
Edited by: Encephalopathic on Jul 11, 2009 11:47 AM

How to insert a picture into the Rich Text Editor

hi,all
I want to make a Press Releases page,that means I have to use the the Rich Text Editor.In this item,I dont know how to quote a picture into this field.though i know there is a picture icon in this field,and when i press it,it can pup up a window.That is the Image Properties Window,under this window,there is a URL text field.But I dont know what to fill in this field,I mean,I dont know what the URL link is .can you just give me a picture URL sample ?
is it like "#APP_IMAGES#136_1_1.jpg" or something else ?
hope to hear from you.thanks ...
best regards
hlee
Edited by: hlee on 2011-3-30 下午8:04

Hi,
There is three types of images reference in oracle apex.
1 Standard image -> url reference is -----> #IMAGE_PREFIX#menu/books_64.gif
2 Workspace images -> url reference is ------> #WORKSPACE_IMAGES#java-icon.jpg
3 Application images -> url reference is ------> #APP_IMAGES#JqueryIcon.jpg
hope this helps you
Thanks,
Jaydip Bosamiya
+91 - 76000 23053
[http://jbosamiya.blogpost.com|http://jbosamiya.blogpost.com]

Photos don't show up in media browser when I want to insert a photo into Word

I'm fully updated in Yosemite (10.10.3) on an iMac (recently purchased). Photos updated just the other day and I chose iCloud for storage. When I try to insert a photo into my Word document no photos show up in the media sidebar "photos" nor in the media browser on Word. My photolibrary is visible under "Pictures" in the sidebar, but it is grayed out. How can I link the sidebar "Media =>Photos" or un-gray it on the pictures?

Sounds like more of a question for the Mail experts. Once the file is added to the Mail message it's not really anything to do with iPhoto.
Regards
TD

I want to insert a picture into a body of text in a blog entry page.

Similar Messages

Maybe you are looking for