I want to interface third party/NI Webcam with Labview .

In my application i want to interface 3 NI / Third party WEBCAMS on TCP/IP with Labview 8.6 on host PC having Windows XP OS.
I am using Compact CRIO 9704 hardware with real time deployment module.
For interfacing webcams which drivers i required? OR Any deployment module is available in NI?
Please suggest.
Thanks in Advance.
Sachin

Hi Sachin,
These cameras will be interfaced throught ethernet or USB. Will they be connected to the PC running Win XP or are you looking to interface them with the cRIO.

Similar Messages

How do I control the motors in a third party usb toy with LabVIEW?

Any suggestions?

Hi, if you are only wanting to control motors than you have a lot of options. Use the parallel port with a current driver, use the serial port and a micro to control the motor. If you want to interface the USB device than this is where to get started.
http://digital.ni.com/public.nsf/allkb/42B604435E3F9604862565E20043CD30
http://zone.ni.com/devzone/cda/tut/p/id/4478
LabVIEW 8.2,8.6,2009...still learning

Can I use third party DAQ boards with Labview real time?

I have an Adlink DAQ 2010 card that I curently use with labview. Will this card also work with Labview real time? What requironments are there for 3rd party cards to work with Labview real time?
Thanks!

Hello George,
Here is a great link for you to take a look at: Can I Use a Third-Party Device with LabVIEW RT?
Have a great day,
NathanT

Install two third party exe's with labview 8 install file

I am trying to install two thrid party drivers onto a deployment machine. I am using labview 8.0 and am deploying the application on a XP machine. The program was developed on a XP machine so that is not an issue. I have created a batch file that works fine when run after the install by itself, but when i include it in the installer properties--advanced--launch exe after install it runs the batch file but doesn't install the drivers. I tried using a dummy batch file that waits then calls the batch file containing the paths for the drivers to install but that didn't work either. Urgent help would be greatly appreciated.
Mark Mutton
Electrical Engineer

Hi Mark,
I found two KBs that talk about launching an exe with an installer as well as how to create a simple batch file.
How Do I Make My LabVIEW-built Installer Run an Executable
After Installation?
Creating a Batch File
Hope this helps.
Regards,
Nadim
Applications Engineering
National Instruments

Third party sales along with subcontracting.

Dear Experts,
Currently in our company we are having a scenario for third party sales along with subcontracting. the scenario is as explained under.
Company
A B C, D, E (vendors)
A raises a PO to B for the purpose of procurement of material X and services Y .
B generates a Sales Order against A's PO and performs procurement of material X
from vendor C. C delivers the goods directly to A and invoices B.
Now here the requirement is that material X is common in company A & B and I need to maintain
the consumption and valuation of material X in both company codes.
How is this done.
In context to the above scenario;
Now the material which has been delivered by company C (vendor) to Company A;
again this company A gives the same material X (which now becomes raw material or spares)
to B as free issue for the purpose of project.
Through normal Third Party sales order created in company B; the system issues me the following message

Hi,
Actually the scenario is that company A & B both are different but wish to interface their operations
in order to achieve speedy transactions. If both were under same company umbrella then intercompany would have been possible. But in this case these are two different companies all together.
thank you for your response.
Regards
Vivek
Edited by: Vivek A. Chokshi on Jan 9, 2009 6:09 PM

Third Party Order Planning with SNP - Forecast not Consumed

Hallo SAP Gurus,
I have implemented the solution "Third Party Order Planning with SNP" created by Abhay Kapase in our SAP APO System - please see http://scn.sap.com/community/scm/apo/blog/2014/02/26/third-party-order-planning-with-snp.
But I have one problem that the forecast is not consumed.
I have done the following things:
1. I have activated the business Functions SCM_APO_DRS_PLAN in the APO System and LOG_MM_OM_2 in the ECC System.
2. I have done the customiznig in the ECC System: Created the schedule line category D1 and assigned it.
3. I have done the customizing in the APO System: Created the planning strategy 21.
4. I have created all the necessary master data in the APO and the ECC System
5. I have been created a customer order.
6. The purchase requisitionhas been transferred to the APO System. But the forecast is not consumed.
Can anybody help me.
Best Regards
Dieter

Someone must know!
We have a similar requirement. We do have CRM but don't wish to implement it for this purpose.
In the SNP planning boook, we want to be able at the SNP vendor location to see the total requirement for both materials to be delivered to our normal supply chain as well as those directly delivered to customers. The direct delivery sales orders are entered to R3 according to the standard process; the purchase requisitions and PO's for these do not go to SNP. The customer location is set-up in SNP. Is there a way to make the purchase req's and orders visible in the SNP Planning Book???
Many thanks
Chris

Third party order processing with GATP allocations and no CRM

Hi,
Does anyone know how to integrate third party order processing with APO product allocations, or know of some good references? We do not have CRM. We currently have APO 4.0, soon to be upgraded to 5.0 and R3 4.6.
Thanks,
Gigi

Someone must know!
We have a similar requirement. We do have CRM but don't wish to implement it for this purpose.
In the SNP planning boook, we want to be able at the SNP vendor location to see the total requirement for both materials to be delivered to our normal supply chain as well as those directly delivered to customers. The direct delivery sales orders are entered to R3 according to the standard process; the purchase requisitions and PO's for these do not go to SNP. The customer location is set-up in SNP. Is there a way to make the purchase req's and orders visible in the SNP Planning Book???
Many thanks
Chris

HT4623 How to stop third party apps download with out you permission from ATT partners that cant see any connections on your account due to you not being the prchaser?

How to stop third party apps download with out you permission from ATT partners that cant see any connections on your account due to you not being the purchaser or on account as long as someone else is paying they can not hold legal resposible there third privacy due to legal privacy laws.

Then you should read these.
http://forums.macrumors.com/showthread.php?t=1804704&highlight=sonnet+tempo+pro
http://forums.macrumors.com/showthread.php?t=1721573&highlight=sonnet+tempo+pro
This was strange but has to do with how startup disk and nvram interact
http://forums.macrumors.com/showthread.php?t=1795765
I think your problems were solvable and not that the Sonnet card and 5,1 is not bootable, in fact the 5,1 is easier, there are more supported cards.
I have the 1,1 where the Sonnet Pro is recommended but for data only and are not bootable because of the 32-bit EFI firmware. NOT the 4,1 and 5,1. The 2008's are problem child and have a mix of PCIe 1.1 slots, first implementation of EFI64 that also has problems. Also the 4,1 has two PCIe 2.x slots 3 and 4 that share a controller but that simply limits bandwidth.
I would have left the TRIM support and NVRAM changes in Yosemite to a separate thread if you wanted to focus on the Sonnet Tempo Pro support in Mac Pro 2010-12 5,1s.
Also the make of SSD can vary and they also have their own firmware as do bootable controllers along with the EFI of the Mac, all of which have to work together. Meaning it might be that Samsung 840 va 840 EVO vs 840 Pro will all be slightly different but my experience is Samsungs work well (as do others like Crucial with the proper firmware - and there was/is an issue with the firmware of the Samsung 840 but not with booting).
The PCIe card gets seen and treated as external and therefore 'eject' but of course you can't when it is the system boot drive.
One thing I found last week and meant to mention: After installing or changing PCIe cards, RESET SMC made all the difference in the world with the long boot delay. Some PCIe cards will add a few seconds, system has to search the device tree which now shows another controller with multiple devices - and sometimes NVRAM and SMC are what I will call "dirty" and need to be rebuilt and reset.

Cannot do MIGO in Third Party Sales Process with shipping notification

In the Third party sales process with Shipping notification,the item category for the material is TAS (Billing relevance=R),item category group is BANS.
Intially sales order is created,then using me21n with reference to purchase requisation purchase order is created,then in MIGO stage i used the PO No there but i get the message no item found in PO.
what adjustment have to be done in order to do MIGO

Refer following SDN thread, by that you will be able to get overview on best practices about Third Party Sales & necessary configuration you need to follow for statistical GR:
- Third party direct shipment (II)
Further maintain Billing Relevance for Item Category as G - Order-related billing of the delivery quantity.
Regards
JP

Third Party Systems Integration with SAP Business One

Different techniques are available in SAP Business One for Integration such as DI API, DI Server, B1WS, etc. In this blog article we tried to describe the architecture and details of different techniques through which ‘Third Party Systems Integration with SAP Business One’ usually happens
Third Party Systems Integration with SAP B1 - APPSeCONNECT

Hi,
Thanks for sharing such excellent blog with advantage and limitations.
Thanks & Regards,
Nagarajan

Third Party Application Integration with Oracle EBS Without any middleware

Hi,
Please give suggestions about the Third Party Application Integration with Oracle EBS
Without any middleware. Can we achieve this?
Thank you,
Muhammad Nasir
Edited by: User129 on Feb 4, 2013 3:45 AM

Muhammad,
You may get better response in Oracle EBS forum -
General EBS Discussion
Regards,
Anuj

How to communicate with third party bluetooth device using LAbVIEW

Hi
      I am trying to communicate with a third party bluetooth device using LabVIEW, I am using a bluetooth dongle. I am able to discover the device and able to open the connection by specifying the service as serial port. But after that when I am trying to read and write data between LabVIEW and the bluetooth device (using Bluetooth Read & Bluetooth Write functions) its not happening.
Dose anybody faced same kind of issue if so kindly guide me, this is first time I am using Blutooth protocol.
Regards
Visuman

Hi,
I am able to talk with bluetooth / serial devices by using Labview protocol (not Wii dll). These are steps:
      Discover the bluetooth device in range (Bluetooth dicover.vi)
      Get the address of the device
      Pass device address to Bluetooth RFCOMM Service Discovery.vi to get service list
      Pass channel and uuid to Bluetooth open connection
      After that do write and read (Bluetooth Write / Bluetooth read).
I hope it works for you.
Take care
tp

Interface of Allen Bradley PLC with LabVIEW using TCP\IP modbus protocol

Hello.....
I want to connect a Allen Bradley PLC with LabVIEW using TCP\IP modbus protocol.
The PLC which I am using is a series of 1766BWA (Allen Bradley) please can you help me for the same or please give me suggestion.
Also I want to know the resistance values of this PLC.
Thank you.

Hello
I was trying for connection of a Allen Bradley PLC with LabVIEW using TCP\IP modbus protocol.
Here I am attaching the snapshot of PLC interfacing and communication vi using modbus but it is not working
For reading we use setting shown in CHANNEL 1-modbus but it gives error regarding modbus addressing
and for writing it shows error illegal address please help me for the same.
Thank you.
Attachments:
PLC_SCREEN.zip ‏261 KB
Modbus_(Read-Write).zip ‏14 KB

How interface N5181A MXG signal generator with labview by using LAN Interface????????????

hai every one ...i have a doubt how to interface N5181A MXG signal Generator with Labview by using LAN Interface???? and
how to find IP Address of N5181A MXG signal Generator????????
when i connect instrument with labview it shows that no instrument connected and what are the requirements for LAN interfacing with that instruments in labview and please help me??????

You can set the IP Address on the instrument. You may need to be in the same subnet of your controlling computer, so you may need to set your computer's IP Address to something static.
Use VISA. It makes life easier if you decide to use another bus (like GPIB, USB, serial, etc). In MAX, create a network session with the static IP address you set the instrument to and use that as the VISA Resource.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Mac Hacked, wanting to buy third party virus scan but afraid to use my credit card

My Mac 10.6.8 was hacked last night. All administrative passwords were changed essentially locking me out of my own computer. My personal AOL email was also attacked and the passwords changed. After a very helpful Apple employee helped me reset all my passwords, I went shopping for a good, relyable third party virus scan and/or remover. But now the quandry is: how do I buy a product to get rid of the problem using a credit card when the virus is still in my computer.
I am at a loss.

and do you know if this is a new attack. have there been other cases?
People have come here with serious hacks on their Mac's, it happens but not that often.
So far there isn't a widespread issue like from malware, it might have been a isolated incident on your part.
Run the Sophos and it if finds anything good, but malware can make anti-virus lie. So a complete flush is still in order.
Anti-virus won't catch a hacker. To prevent hackers you need a intrusion detection system and there hasn't been a easy to use one for Mac's in ages.
i'm a bit scared about my personal info.
Don't put or do anything with computers or technology that your not willing to share with the world.
Apple, Google and Microsoft all have been successfully hacked. Nobody is perfect.
i've been checking activity moniter... is there anything i should be looking for.
If they are in EFI, no.
Acitiviy monitor only shows what is going on in OS X, not in EFI or firmware.
If you want to check OS X out. Then open Terminal and paste/press return and upload the file on your desktop/home folder to this website, they will check for known malware.
http://triviaware.com/macprocess/
if i shut off my internet are they still capable of screwing me?
Yes of course, they can leave a timer and destroy your data or encrypt it etc.,
Being cut off the Internet doesn't stop them, just they lose contact, can't use your machine like a bot.
http://news.cnet.com/8301-1009_3-57409619-83/more-than-600000-macs-infected-with -flashback-botnet/
can this result in identity theft? should i proactively call the police?
You should file a report, with them, beause if someone does something in your name it's a matter of record you reported a intrusion into your computer.
You also should talk to your bank, freeze any credit cards you have used on the machine, any information that they can use to gain access to your accounts.
If they go into your machine and emails, they go for the money and whatever they can charge on you also.
This is why I say call in a professional, I'm not here 24/7 to assist and just lucky I saw your post.

I want to interface third party/NI Webcam with Labview .

Similar Messages

Maybe you are looking for